Operando studies reveal active Cu nanograins for CO2 electroreduction.

Carbon dioxide electroreduction facilitates the sustainable synthesis of fuels and chemicals1. Although Cu enables CO2-to-multicarbon product (C2+) conversion, the nature of the active sites under operating conditions remains elusive2. Importantly, identifying active sites of high-performance Cu nanocatalysts necessitates nanoscale, time-resolved operando techniques3-5. Here, we present a comprehensive investigation of the structural dynamics during the life cycle of Cu nanocatalysts. A 7 nm Cu nanoparticle ensemble evolves into metallic Cu nanograins during electrolysis before complete oxidation to single-crystal Cu2O nanocubes following post-electrolysis air exposure. Operando analytical and four-dimensional electrochemical liquid-cell scanning transmission electron microscopy shows the presence of metallic Cu nanograins under CO2 reduction conditions. Correlated high-energy-resolution time-resolved X-ray spectroscopy suggests that metallic Cu, rich in nanograin boundaries, supports undercoordinated active sites for C-C coupling. Quantitative structure-activity correlation shows that a higher fraction of metallic Cu nanograins leads to higher C2+ selectivity. A 7 nm Cu nanoparticle ensemble, with a unity fraction of active Cu nanograins, exhibits sixfold higher C2+ selectivity than the 18 nm counterpart with one-third of active Cu nanograins. The correlation of multimodal operando techniques serves as a powerful platform to advance our fundamental understanding of the complex structural evolution of nanocatalysts under electrochemical conditions.

Cobalt-electrocatalytic HAT for functionalization of unsaturated C-C bonds.

The study and application of transition metal hydrides (TMHs) has been an active area of chemical research since the early 1960s1, for energy storage, through the reduction of protons to generate hydrogen2,3, and for organic synthesis, for the functionalization of unsaturated C-C, C-O and C-N bonds4,5. In the former instance, electrochemical means for driving such reactivity has been common place since the 1950s6 but the use of stoichiometric exogenous organic- and metal-based reductants to harness the power of TMHs in synthetic chemistry remains the norm. In particular, cobalt-based TMHs have found widespread use for the derivatization of olefins and alkynes in complex molecule construction, often by a net hydrogen atom transfer (HAT)7. Here we show how an electrocatalytic approach inspired by decades of energy storage research can be made use of in the context of modern organic synthesis. This strategy not only offers benefits in terms of sustainability and efficiency but also enables enhanced chemoselectivity and distinct, tunable reactivity. Ten different reaction manifolds across dozens of substrates are exemplified, along with detailed mechanistic insights into this scalable electrochemical entry into Co-H generation that takes place through a low-valent intermediate.

Multidimensional visualization of the dynamic evolution of Li metal via in situ/operando methods.

The growing demands for high-energy density electrical energy storage devices stimulate the coupling of conversion-type cathodes and lithium (Li) metal anodes. While promising, the use of these "Li-free" cathodes brings new challenges to the Li anode interface, as Li needs to be dissolved first during cell operation. In this study, we have achieved a direct visualization and comprehensive analysis of the dynamic evolution of the Li interface. The critical metrics of the interfacial resistance, Li growth, and solid electrolyte interface (SEI) distribution during the initial dissolution/deposition processes were systematically investigated by employing multidimensional analysis methods. They include three-electrode impedance tests, in situ atomic force microscopy, scanning electrochemical microscopy, and cryogenic scanning transmission electron microscopy. The high-resolution imaging and real-time observations show that a loose, diffuse, and unevenly distributed SEI is formed during the initial dissolution process. This leads to the dramatically fast growth of Li during the subsequent deposition, deviating from Fick's law, which exacerbates the interfacial impedance. The compactness of the interfacial structure and enrichment of electrolyte species at the surface during the initial deposition play critical roles in the long-term stability of Li anodes, as revealed by operando confocal Raman spectroscopic mapping. Our observations relate to ion transfer, morphological and structural evolution, and Li (de)solvation at Li interfaces, revealing the underlying pathways influenced by the initial dissolution process, which promotes a reconsideration of anode investigations and effective protection strategies.

A completely precious metal-free alkaline fuel cell with enhanced performance using a carbon-coated nickel anode.

SignificanceWe present a groundbreaking advance in completely nonprecious hydrogen fuel cell technologies achieving a record power density of 200 mW/cm2 with Ni@CNx anode and Co-Mn cathode. The 2-nm CNx coating weakens the O-binding energy, which effectively mitigates the undesirable surface oxidation during hydrogen oxidation reaction (HOR) polarization, leading to a stable fuel cell operation for Ni@CNx over 100 h at 200 mA/cm2, superior to a Ni nanoparticle counterpart. Ni@CNx exhibited a dramatically enhanced tolerance to CO relative to Pt/C, enabling the use of hydrogen gas with trace amounts of CO, critical for practical applications. The complete removal of precious metals in fuel cells lowers the catalyst cost to virtually negligible levels and marks a milestone for practical alkaline fuel cells.

Unraveling the Mechanism of Ammonia Electrooxidation by Coupled Differential Electrochemical Mass Spectrometry and Surface-Enhanced Infrared Absorption Spectroscopic Studies.

Ammonia electrooxidation has received considerable attention in recent times due to its potential application in direct ammonia fuel cells, ammonia sensors, and denitrification of wastewater. In this work, we used differential electrochemical mass spectrometry (DEMS) coupled with attenuated total reflection-surface-enhanced infrared absorption (ATR-SEIRA) spectroscopy to study adsorbed species and solution products during the electrochemical ammonia oxidation reaction (AOR) on Pt in alkaline media, and to correlate the product distribution with the surface ad-species. Hydrazine electrooxidation, hydroxylamine electrooxidation/reduction, and nitrite electroreduction on Pt have also been studied to enhance the understanding of the AOR mechanism. NH3, NH2, NH, NO, and NO2 ad-species were identified on the Pt surface with ATR-SEIRA spectroscopy, while N2, N2O, and NO were detected with DEMS as products of the AOR. N2 is formed through the coupling of two NH ad-species and then subsequent further dehydrogenation, while the dimerization of HNOad leads to the formation of N2O. The NH-NH coupling is the rate-determining step (rds) at high potentials, while the first dehydrogenation step is the rds at low potentials. These new spectroscopic results about the AOR and insights could advance the search and design of more effective AOR catalysts.

Oxygen Reduction Pathway for Spinel Metal Oxides in Alkaline Media: An Experimentally Supported Ab Initio Study.

Precious-metal-free spinel oxide electrocatalysts are promising candidates for catalyzing the oxygen reduction reaction (ORR) in alkaline fuel cells. In this theory-driven study, we use joint density functional theory (JDFT) in tandem with supporting electrochemical measurements to identify a novel theoretical pathway for the ORR on cubic Co3O4 nanoparticle electrocatalysts, which aligns more closely with experimental results than previous models. The new pathway employs the cracked adsorbates *(OH)(O) and *(OH)(OH), which, through hydrogen bonding, induce spectator surface *H. This results in an onset potential closely matching experimental values, in stark contrast to the traditional ORR pathway, which keeps adsorbates intact and overestimates the onset potential by 0.7 V. Finally, we introduce electrochemical strain spectroscopy (ESS), a groundbreaking strain analysis technique. ESS combines ab initio calculations with experimental measurements to validate the proposed reaction pathways and pinpoint rate-limiting steps.

Atomically Dispersed Zn/Co-N-C as ORR Electrocatalysts for Alkaline Fuel Cells.

Hydrogen fuel cells have drawn increasing attention as one of the most promising next-generation power sources for future automotive transportation. Developing efficient, durable, and low-cost electrocatalysts, to accelerate the sluggish oxygen reduction reaction (ORR) kinetics, is urgently needed to advance fuel cell technologies. Herein, we report on metal-organic frameworks-derived nonprecious dual metal single-atom catalysts (SACs) (Zn/Co-N-C), consisting of Co-N4 and Zn-N4 local structures. These catalysts exhibited superior ORR activity with a half-wave potential (E1/2) of 0.938 V versus RHE (reversible hydrogen electrode) and robust stability (ΔE1/2 = -8.5 mV) after 50k electrochemical cycles. Moreover, this remarkable performance was validated under realistic fuel cell working conditions, achieving a record-high peak power density of ∼1 W cm-2 among the reported SACs for alkaline fuel cells. Operando X-ray absorption spectroscopy was conducted to identify the active sites and reveal catalytic mechanistic insights. The results indicated that the Co atom in the Co-N4 structure was the main catalytically active center, where one axial oxygenated species binds to form an Oads-Co-N4 moiety during the ORR. In addition, theoretical studies, based on a potential-dependent microkinetic model and core-level shift calculations, showed good agreement with the experimental results and provided insights into the bonding of oxygen species on Co-N4 centers during the ORR. This work provides a comprehensive mechanistic understanding of the active sites in the Zn/Co-N-C catalysts and will pave the way for the future design and advancement of high-performance single-site electrocatalysts for fuel cells and other energy applications.

Colloidal Synthesis of Monodisperse High-Entropy Spinel Oxide Nanocrystals.

Synthesis of high-entropy oxide (HEO) nanocrystals has focused on increasing the temperature in the entropy term (T(ΔS)) to overcome the enthalpy term. However, these high temperatures lead to large, polydisperse nanocrystals. In this work, we leverage the low solubility product (Ksp) of metal oxides and optimize the Lewis-acid-catalyzed esterification reaction for equal rate production of the cation monomers to synthesize HEO nanocrystals at low temperatures, producing the smallest (<4 nm) and most monodisperse (<15% size dispersity) HEOs to date. We apply these HEO nanocrystals as electrocatalysts, exhibiting promising activity toward the oxygen evolution reaction in alkaline media, with an overpotential of 345 mV at 10 mA/cm2.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies.

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Understanding the Structural Evolution of IrFeCoNiCu High-Entropy Alloy Nanoparticles under the Acidic Oxygen Evolution Reaction.

High-entropy alloy (HEA) nanoparticles are promising catalyst candidates for the acidic oxygen evolution reaction (OER). Herein, we report the synthesis of IrFeCoNiCu-HEA nanoparticles on a carbon paper substrate via a microwave-assisted shock synthesis method. Under OER conditions in 0.1 M HClO4, the HEA nanoparticles exhibit excellent activity with an overpotential of ∼302 mV measured at 10 mA cm-2 and improved stability over 12 h of operation compared to the monometallic Ir counterpart. Importantly, an active Ir-rich shell layer with nanodomain features was observed to form on the surface of IrFeCoNiCu-HEA nanoparticles immediately after undergoing electrochemical activation, mainly due to the dissolution of the constituent 3d metals. The core of the particles was able to preserve the characteristic homogeneous single-phase HEA structure without significant phase separation or elemental segregation. This work illustrates that under acidic operating conditions, the near-surface structure of HEA nanoparticles is susceptible to a certain degree of structural dynamics.

Identifying Adsorbed OH Species on Pt and Ru Electrodes with Surface-Enhanced Infrared Absorption Spectroscopy through CO Displacement.

OH adspecies are involved in numerous electrocatalytic reactions, such as CO, H2, methanol, and ethanol oxidation and oxygen reduction reactions, as a reaction intermediate and/or reactant. In this work, we have, for the first time, identified the OH stretching band of OH adspecies on Pt, Ru, and Pt/Ru electrodes with surface-enhanced infrared absorption spectroscopy (SEIRAS) in a flow cell through potential modulation and CO displacement. We found that while Ru had a relatively constant OH coverage at potentials between 0.1 and 0.8 V, Pt had a maximum OH coverage at 0.6 V in 0.1 M HClO4 and 0.7 V in 0.1 M KOH. CO oxidation kinetics on Ru were sluggish, although adsorbed OH appeared on Ru at very low potentials. Binary Pt/Ru electrodes promote CO oxidation through a synergistic effect in which Ru promotes OH adsorption and Pt catalyzes the reaction between the CO and OH adspecies. In addition, water coadsorbed with CO at Ru sites of Pt/Ru also plays an important role. These new spectroscopic results about OH adspecies could advance the understanding of the mechanism of fuel cell related electrocatalysis.

Adsorbed Enolate as the Precursor for the C-C Bond Splitting during Ethanol Electrooxidation on Pt.

Ethanol is a promising alternative fuel to methanol for direct alcohol fuel cells. However, the complete electrooxidation of ethanol to CO2 involves 12 electrons and C-C bond splitting so that the detailed mechanism of ethanol decomposition/oxidation remains elusive. In this work, a spectroscopic platform, combining SEIRA spectroscopy with DEMS, and isotopic labeling were employed to study ethanol electrooxidation on Pt under well-defined electrolyte flow conditions. Time- and potential-dependent SEIRA spectra and mass spectrometric signals of volatile species were simultaneously obtained. For the first time, adsorbed enolate was identified with SEIRA spectroscopy as the precursor for C-C bond splitting during ethanol oxidation on Pt. The C-C bond rupture of adsorbed enolate led to the formation of CO and CHx ad-species. Adsorbed enolate can also be further oxidized to adsorbed ketene at higher potentials or reduced to vinyl/vinylidene ad-species in the hydrogen region. CHx and vinyl/vinylidene ad-species can be reductively desorbed only at potentials below 0.2 and 0.1 V, respectively, or oxidized to CO2 only at potentials above 0.8 V, and thus they poison Pt surfaces. These new mechanistic insights will help provide design criteria for higher-performing and more durable electrocatalysts for direct ethanol fuel cells.

General Route to Colloidally Stable, Low-Dispersity Manganese-Based Ternary Spinel Oxide Nanocrystals.

While certain ternary spinel oxides have been well-explored with colloidal nanochemistry, notably the ferrite spinel family, ternary manganese (Mn)-based spinel oxides have not been tamed. A key composition is cobalt (Co)-Mn oxide (CMO) spinel, CoxMn3-xO4, that, despite exemplary performance in multiple electrochemical applications, has few reports in the colloidal literature. Of these reports, most show aggregated and polydisperse products. Here, we describe a synthetic method for small, colloidally stable CMO spinel nanocrystals with tunable composition and low dispersity. By reacting 2+ metal-acetylacetonate (M(acac)2) precursors in an amine solvent under an oxidizing environment, we developed a pathway that avoids the highly reducing conditions of typical colloidal synthesis reactions; these reducing conditions typically push the system toward a monoxide impurity phase. Through surface chemistry studies, we identify organic byproducts and their formation mechanism, enabling us to engineer the surface and obtain colloidally stable nanocrystals with low organic loading. We report a CMO/carbon composite with low organic contents that performs the oxygen reduction reaction (ORR) with a half-wave potential (E1/2) of 0.87 V vs RHE in 1.0 M potassium hydroxide at 1600 rpm, rivaling previous reports for the highest activity of this material in ORR electrocatalysis. We extend the general applicability of this procedure to other Mn-based spinel nanocrystals such as Zn-Mn-O, Fe-Mn-O, Ni-Mn-O, and Cu-Mn-O. Finally, we show the scalability of this method by producing inorganic nanocrystals at the gram scale.

Re-Thinking Dimer Design Principles with Indolonaphthyridine Intramolecular Singlet Fission.

Singlet fission is a phenomenon that could significantly improve the efficiency of photovoltaic devices. Indolonaphthyridine thiophene (INDT) is a photostable singlet fission material that could potentially be utilised in singlet fission-based photovoltaic devices. This study investigates the intramolecular singlet fission (i-SF) mechanism of INDT dimers linked via para-phenyl, meta-phenyl and fluorene bridging groups. Using ultra-fast spectroscopy the highest rate of singlet fission is found in the para-phenyl linked dimer. Quantum calculations show the para-phenyl linker encourages enhanced monomer electronic coupling. Increased rates of singlet fission were also observed in the higher polarity o-dichlorobenzene, relative to toluene, indicating that charge-transfer states have a role in mediating the process. The mechanistic picture of polarisable singlet fission materials, such as INDT, extends beyond the traditional mechanistic landscape.

Direct Insertion Polymerization of Ionic Monomers: Rapid Production of Anion Exchange Membranes.

The limited number of methods to directly polymerize ionic monomers currently hinders rapid diversification and production of ionic polymeric materials, namely anion exchange membranes (AEMs) which are essential components in emerging alkaline fuel cell and electrolyzer technologies. Herein, we report a direct coordination-insertion polymerization of cationic monomers, providing the first direct synthesis of aliphatic polymers with high ion incorporations and allowing facile access to a broad range of materials. We demonstrate the utility of this method by rapidly generating a library of solution processable ionic polymers for use as AEMs. We investigate these materials to study the influence of cation identity on hydroxide conductivity and stability. We found that AEMs with piperidinium cations exhibited the highest performance, with high alkaline stability, hydroxide conductivity of 87 mS cm-1 at 80 °C, and a peak power density of 730 mW cm-2 when integrated into a fuel cell device.

Oxidative Stability Matters: A Case Study of Palladium Hydride Nanosheets for Alkaline Fuel Cells.

Pd-based electrocatalysts are considered to be a promising alternative to Pt in anion-exchange membrane fuel cells (AEMFCs), although major challenges remain. Most of the Pd-based electrocatalysts developed for the sluggish oxygen reduction reaction (ORR) have been exclusively evaluated by rotating disk electrode (RDE) voltammetry at room temperature, rather than in membrane electrode assemblies (MEAs), making it challenging to apply them in practical fuel cells. We have developed a series of carbon-supported novel PdHx nanosheets (PdHx NS), which displayed outstanding ORR performance in room-temperature RDE tests. Specifically, a sample synthesized at 190 °C displayed a mass activity of 0.67 A mg-1 and a specific activity of 1.07 mA cm-2 at 0.95 V vs RHE, representing the highest reported value among Pd-based ORR electrocatalysts in alkaline media and higher than Pt-based catalysts reported in the literature. Furthermore, we employed PdHx NS and commercial Pd/C as model catalysts to systematically study the effects of temperature on their ORR activity in RDE measurements and subsequently evaluated their performance in MEA testing. Our observations indicate/demonstrate how oxidative stability affected the ORR performance of Pd-based electrocatalysts, which provided some critical insights into future ORR catalyst development for alkaline fuel cell applications.

Elucidating Cathodic Corrosion Mechanisms with Operando Electrochemical Transmission Electron Microscopy.

Cathodic corrosion represents an enigmatic electrochemical process in which metallic electrodes corrode under sufficiently reducing potentials. Although discovered by Fritz Haber in the 19th century, only recently has progress been made in beginning to understand the atomistic mechanisms of corroding bulk electrodes. The creation of nanoparticles as the end-product of the corrosion process suggests an additional length scale of complexity. Here, we studied the dynamic evolution of morphology, composition, and crystallographic structural information of nanocrystal corrosion products by analytical and four-dimensional electrochemical liquid-cell scanning transmission electron microscopy (EC-STEM). Our operando/in situ electron microscopy revealed, in real-time, at the nanometer scale, that cathodic corrosion yields significantly higher levels of structural degradation for heterogeneous nanocrystals than bulk electrodes. In particular, the cathodic corrosion of Au nanocubes on bulk Pt electrodes led to the unexpected formation of thermodynamically immiscible Au-Pt alloy nanoparticles. The highly kinetically driven corrosion process is evidenced by the successive anisotropic transition from stable Pt(111) bulk single-crystal surfaces evolving to energetically less-stable (100) and (110) steps. The motifs identified in this microscopy study of cathodic corrosion of nanocrystals are likely to underlie the structural evolution of nanoscale electrocatalysts during many electrochemical reactions under highly reducing potentials, such as CO2 and N2 reduction.

Intercepting Hydrogen Evolution with Hydrogen-Atom Transfer: Electron-Initiated Hydrofunctionalization of Alkenes.

Hydrogen-atom transfer mediated by earth-abundant transition-metal hydrides (M-Hs) has emerged as a powerful tool in organic synthesis. Current methods to generate M-Hs most frequently rely on oxidatively initiated hydride transfer. Herein, we report a reductive approach to generate Co-H, which allows for canonical hydrogen evolution reactions to be intercepted by hydrogen-atom transfer to an alkene. Electroanalytical and spectroscopic studies provided mechanistic insights into the formation and reactivity of Co-H, which enabled the development of two new alkene hydrofunctionalization reactions.

New insights into methanol and formic acid electro-oxidation on Pt: Simultaneous DEMS and ATR-SEIRAS study under well-defined flow conditions and simulations of CO spectra.

Methanol and formic acid electro-oxidation on Pt has been studied under well-defined flow conditions by a spectroscopic platform that combines differential electrochemical mass spectrometry (DEMS) and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. The volatile soluble products from methanol and formic acid oxidation on Pt have been detected by DEMS, while adsorbed intermediates have been identified with ATR-FTIR spectroscopy. Besides CO2 and methylformate, which were detected by DEMS, other non-volatile soluble intermediates such as formaldehyde and formic acid were also generated during methanol oxidation on Pt. Besides water adsorption bands, linearly bonded CO, bridge-bonded CO, adsorbed formate, adsorbed formic acid, and adsorbed CHO bands were observed by ATR-FTIR spectroscopy during methanol and formic acid oxidation on Pt. Formic acid adsorption suppressed the formate and water adsorption. Our results suggest that formate could be an inactive adsorbed species, rather than an active intermediate, for both methanol and formic acid oxidation. Pb modification of Pt significantly enhanced formic acid oxidation through the direct pathway due to the third-body effect and electronic effects. Formic acid oxidation took place mainly at Pb modified low-coordinated defect sites at low potentials. Formic acid decomposition to form adsorbed CO occurred only in the hydrogen region, and Pb modification also slightly enhanced the successive oxidation of adsorbed CO. A double-peak infrared band was observed for linearly bound CO on the Pt film and was simulated with the Fresnel equations and Bruggeman effective medium theory.

Octahedral spinel electrocatalysts for alkaline fuel cells.

Designing high-performance nonprecious electrocatalysts to replace Pt for the oxygen reduction reaction (ORR) has been a key challenge for advancing fuel cell technologies. Here, we report a systematic study of 15 different AB2O4/C spinel nanoparticles with well-controlled octahedral morphology. The 3 most active ORR electrocatalysts were MnCo2O4/C, CoMn2O4/C, and CoFe2O4/C. CoMn2O4/C exhibited a half-wave potential of 0.89 V in 1 M KOH, equal to the benchmark activity of Pt/C, which was ascribed to charge transfer between Co and Mn, as evidenced by X-ray absorption spectroscopy. Scanning transmission electron microscopy (STEM) provided atomic-scale, spatially resolved images, and high-energy-resolution electron-loss near-edge structure (ELNES) enabled fingerprinting the local chemical environment around the active sites. The most active MnCo2O4/C was shown to have a unique Co-Mn core-shell structure. ELNES spectra indicate that the Co in the core is predominantly Co2.7+ while in the shell, it is mainly Co2+ Broader Mn ELNES spectra indicate less-ordered nearest oxygen neighbors. Co in the shell occupies mainly tetrahedral sites, which are likely candidates as the active sites for the ORR. Such microscopic-level investigation probes the heterogeneous electronic structure at the single-nanoparticle level, and may provide a more rational basis for the design of electrocatalysts for alkaline fuel cells.