Graphene metallization of high-stress silicon nitride resonators for electrical integration.

High stress stoichiometric silicon nitride resonators, whose quality factors exceed one million, have shown promise for applications in sensing, signal processing, and optomechanics. Yet, electrical integration of the insulating silicon nitride resonators has been challenging, as depositing even a thin layer of metal degrades the quality factor significantly. In this work, we show that graphene used as a conductive coating for Si3N4 membranes reduces the quality factor by less than 30% on average, which is minimal when compared to the effect of conventional metallization layers such as chromium or aluminum. The electrical integration of Si3N4-Graphene (SiNG) heterostructure resonators is demonstrated with electrical readout and electrostatic tuning of the frequency by up to 0.3% per volt. These studies demonstrate the feasibility of hybrid graphene/nitride mechanical resonators in which the electrical properties of graphene are combined with the superior mechanical performance of silicon nitride.

Photothermal self-oscillation and laser cooling of graphene optomechanical systems.

By virtue of their low mass and stiffness, atomically thin mechanical resonators are attractive candidates for use in optomechanics. Here, we demonstrate photothermal back-action in a graphene mechanical resonator comprising one end of a Fabry-Perot cavity. As a demonstration of the utility of this effect, we show that a continuous wave laser can be used to cool a graphene vibrational mode or to power a graphene-based tunable frequency oscillator. Owing to graphene's high thermal conductivity and optical absorption, photothermal optomechanics is efficient in graphene and could ultimately enable laser cooling to the quantum ground state or applications such as photonic signal processing.

Graphene-Sealed Flow Cells for In Situ Transmission Electron Microscopy of Liquid Samples.

We introduce a graphene-based nanofluidic cell that facilitates in situ imaging of liquid samples via transmission electron microscopy. The cell combines the benefits of graphene liquid cells-namely, high resolution, reduced charging effects, and excellent sample stability-with the ability to introduce reactants and control fluid concentrations as provided by conventional silicon-nitride-windowed flow cells. The graphene flow cell offers significantly less window bowing compared to existing commercial holders. We demonstrate the performance of the flow cell by imaging gold nanoparticle dynamics and uranyl acetate crystallization. Our results confirm the utility of graphene flow cells in obtaining the high spatial and temporal resolution required for probing the complex dynamics of nanoparticles and nucleation pathways in aqueous solutions.

Active protection of a superconducting qubit with an interferometric Josephson isolator.

Nonreciprocal microwave devices play critical roles in high-fidelity, quantum-nondemolition (QND) measurement schemes. They impose unidirectional routing of readout signals and protect the quantum systems from unwanted noise originated by the output chain. However, cryogenic circulators and isolators are disadvantageous in scalable superconducting architectures because they use magnetic materials and strong magnetic fields. Here, we realize an active isolator formed by coupling two nondegenerate Josephson mixers in an interferometric scheme and driving them with phase-shifted, same-frequency pumps. By incorporating our Josephson-based isolator into a superconducting qubit setup, we demonstrate fast, high-fidelity, QND measurements of the qubit while providing 20 dB of protection within a bandwidth of 10 MHz against amplified noise reflected off the Josephson amplifier in the output chain. A moderate reduction of 35% is observed in T2E when the Josephson-based isolator is turned on. Such a moderate degradation can be mitigated by minimizing heat dissipation in the pump lines.

High coherence plane breaking packaging for superconducting qubits.

We demonstrate a pogo pin package for a superconducting quantum processor specifically designed with a nontrivial layout topology (e.g., a center qubit that cannot be accessed from the sides of the chip). Two experiments on two nominally identical superconducting quantum processors in pogo packages, which use commercially available parts and require modest machining tolerances, are performed at low temperature (10 mK) in a dilution refrigerator and both found to behave comparably to processors in standard planar packages with wirebonds where control and readout signals come in from the edges. Single- and two-qubit gate errors are also characterized via randomized benchmarking, exhibiting similar error rates as in standard packages, opening the possibility of integrating pogo pin packaging with extensible qubit architectures.

Single-particle mapping of nonequilibrium nanocrystal transformations.

Chemists have developed mechanistic insight into numerous chemical reactions by thoroughly characterizing nonequilibrium species. Although methods to probe these processes are well established for molecules, analogous techniques for understanding intermediate structures in nanomaterials have been lacking. We monitor the shape evolution of individual anisotropic gold nanostructures as they are oxidatively etched in a graphene liquid cell with a controlled redox environment. Short-lived, nonequilibrium nanocrystals are observed, structurally analyzed, and rationalized through Monte Carlo simulations. Understanding these reaction trajectories provides important fundamental insight connecting high-energy nanocrystal morphologies to the development of kinetically stabilized surface features and demonstrates the importance of developing tools capable of probing short-lived nanoscale species at the single-particle level.

Development of high-throughput, polarization-maintaining, near-field probes.

A novel, chemical-etching technique produces very high throughput, polarization-maintaining probes for near-field, scanning, optical microscopy (NSOM). The process includes coating the tips with aluminum and forming the apertures with a focused ion beam (FIB). The elliptical core fibers used resulted in elliptical apertures for the probes. The throughput of the probes depends on the incident polarization. For polarization parallel to the minor axis, the tip presents an insertion loss of only 20 dB for aperture widths of 55 nm. Probes have a typical polarization extinction of 100 to 1 in the far field. These tips produced NSOM images of gold dots on a GaAs substrate in reflection mode.