RESUMEN
In this study, porous sandwich structure Fe3 O4 nanoparticles coated by polyhedral oligomeric silsesquioxanes and ß-cyclodextrin were prepared by surface polymerization and were used as the magnetic solid phase extraction adsorbent for the extraction and determination of carbaryl and carbofuran. The Fe3 O4 nanoparticles coated with polyhedral oligomeric silsesquioxanes and ß-cyclodextrin were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, and scanning electron microscopy. After optimizing the extraction conditions, a method that combined magnetic solid phase extraction with high-performance liquid chromatography was developed for the determination of carbaryl and carbofuran in apple. The method exhibited a good linearity in the range of 2-400 µg/kg for carbaryl and carbofuran (R2 = 0.9995), respectively. The limits of detection were 0.5 µg/kg of carbaryl and 0.7 µg/kg for carbofuran in apple, respectively. Extraction recoveries ranged from 94.2 to 103.1% with the preconcentration factor of 300 and the relative standard deviations were less than 5.9%. These results indicated that the method combined magnetic solid phase extraction with high-performance liquid chromatography and was promising for the determination of carbaryl and carbofuran at trace amounts.
Asunto(s)
Carbaril/aislamiento & purificación , Carbofurano/aislamiento & purificación , Nanopartículas de Magnetita/química , Siloxanos/química , Extracción en Fase Sólida , beta-Ciclodextrinas/química , Carbaril/química , Carbofurano/química , Fenómenos MagnéticosRESUMEN
A polyaniline composite doped with etched multi-walled carbon nanotubes and UiO-66-NH2 was prepared by electropolymerization. It was used as a sorbent to extract the polycyclic aromatic hydrocarbons (PAHs) phenanthrene, fluoranthene and pyrene. Its surface morphology, crystal structure and capability of adsorbing PAHs were characterized by scanning electron microscopy, X-ray photoelectron spectrometry, Fourier transform infrared spectrometry and zeta potentiometry. The π stacking and anion-π interactions are shown to play dominant roles in the sorption mechanism. Coupled with high performance liquid chromatography, the composite-modified fiber was applied to detect PAHs in lake water samples by direct immersion extraction. The method excels by (a) wide linear range (0.05-20 ng mL-1), (b) low limits of detection (10 pg mL-1), (c) satisfactory recovery from spiked samples (84.7-113.8%), and (d) good reproducibility (relative standard deviations of <6.5%). The method is superior in terms of costs and reproducibility compared to some pretreatment methods with mass spectrometric detection. Graphical abstractSchematic representation for interaction between PANI-etched MWCNT/UiO-66-NH2 and polycyclic aromatic hydrocarbons (phenanthrene, fluoranthene, pyrene).
Asunto(s)
Cromatografía Líquida de Alta Presión/métodos , Nanocompuestos/química , Hidrocarburos Policíclicos Aromáticos/aislamiento & purificación , Contaminantes del Agua/aislamiento & purificación , Adsorción , Compuestos de Anilina/química , Cromatografía Líquida de Alta Presión/normas , Fluorenos/aislamiento & purificación , Lagos/química , Límite de Detección , Estructuras Metalorgánicas/química , Nanotubos de Carbono/química , Fenantrenos/aislamiento & purificación , Pirenos/aislamiento & purificación , Reproducibilidad de los ResultadosRESUMEN
In this work, adsorption behaviors of pyrene (PYR), fluoranthene (FLT), phenanthrene (PHE), and fluorene (FLU) on the coordination cluster [Zn5(H2Ln)6](NO3)4]·8H2O·2CH3OH (Zn5) were studied. The adsorption mechanism and spectrum analyses revealed that the synergistic effect of hydrophobic interaction, π-π stacking, and N-H···π interaction played a crucial role during the adsorption process. The maximum adsorption capacities of PYR, FLT, PHE, and FLU were 406.4, 399.7, 153.7, and 114.3 mg g-1, respectively, resulting from the Langmuir isotherm model. Quick removal of PYR and FLT was found in kinetic experiments with the adsorption equilibrium being reached within 1 min. Competitive adsorption indicated that the adsorption sites for PYR, FLT, PHE, and FLU on Zn5 were identical, and synergistic effects also existed in the adsorption process. Therefore, Zn5 has the potential to be used as an adsorbent in the field of wastewater treatment.
RESUMEN
An acryloyl ß-cyclodextrin-silica hybrid monolithic column for pipette tip solid-phase extraction and high-performance liquid chromatography determination of methyl parathion and fenthion has been prepared through a sol-gel polymerization method. The synthesis conditions, including the volume of cross-linker and the ratio of inorganic solution to organic solution, were optimized. The prepared monolithic column was characterized by thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The eluent type, volume and flow rate, sample volume, flow rate, acidity, and ionic strength were optimized in detail. Under the optimized conditions, a simple and sensitive pipette tip solid-phase extraction with high-performance liquid chromatography method was developed for the determination of methyl parathion and fenthion in lettuce. The method yielded a linear calibration curve in the concentration ranges of 15-400 µg/kg for methyl parathion and 20-400 µg/kg for fenthion with correlation coefficients of above 0.9957. The limits of detection were 4.5 µg/kg for methyl parathion and 6.0 µg/kg for fenthion, respectively. The recoveries of methyl parathion and fenthion spiked in lettuce ranged from 96.0 to 104.2% with relative standard deviations less than 8.4%.
Asunto(s)
Fentión/análisis , Metil Paratión/análisis , Dióxido de Silicio/química , Extracción en Fase Sólida , beta-Ciclodextrinas/química , Cromatografía Líquida de Alta Presión , Estructura MolecularRESUMEN
In this study, magnetic Fe3O4@SiO2@ß-cyclodextrin copolymerized microparticles were synthesized and applied for the extraction of methyl parathion and fenthion in lettuce samples followed by HPLC-UV detection. The magnetic ß-cyclodextrin copolymerized microparticles were prepared by dispersion polymerization with acryloyl ß-cyclodextrin as the functional monomer and ethylene glycol dimethyacrylate as the crosslinker. The composite magnetic microparticles were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, magnetic measurement, and thermogravimetric analysis, and used as the adsorbent of magnetic solid-phase extraction (MSPE) for methyl parathion and fenthion. The extraction conditions including sample pH and ionic strength, desorption solvent type and volume, and adsorption and desorption times were optimized. Under the optimal extraction conditions, an MSPE-HPLC-UV method was developed for the detection of methyl parathion and fenthion in lettuce. Wide linear ranges of 1.0-200 µg kg-1 (R2 = 0.9998) for methyl parathion and 1.5-200 µg kg-1 (R2 = 0.9978) for fenthion were obtained and the limits of detection were 0.3 µg kg-1 for methyl parathion and 0.5 µg kg-1 for fenthion in lettuce, respectively. The proposed method was applied for the determination of methyl parathion and fenthion in lettuce with satisfactory recoveries between 89.2-101.2%, and relative standard deviations were less than 9.1%. Thus, the MSPE-HPLC-UV method has high accuracy and sensitivity for the analysis of methyl parathion and fenthion in lettuce samples.
Asunto(s)
Metil Paratión , beta-Ciclodextrinas , Fentión , Lactuca , Límite de Detección , Fenómenos Magnéticos , Dióxido de Silicio , Extracción en Fase SólidaRESUMEN
This work describes, for the first time, an acryloyled ß-cyclodextrin hybrid monolith column was synthesized, under aqueous-phase conditions, and used for solid-phase microextraction of carbendazim and carbaryl. The monolithic column was characterized using scanning electron microscopy, nitrogen adsorption-desorption, thermogravimetric analysis and Fourier transform infrared spectroscopy, and used as the adsorbent for solid phase microextraction (SPME) of carbendazim and carbaryl. After optimization of the SPME conditions, a simple and sensitive SPME-HPLC method was developed for the determination of carbendazim and carbaryl in leafy vegetables. The method exhibited a good liner response in the range 5-400⯵g/kg (R2â¯=â¯0.9994) for carbendazim and 10-400⯵g/kg (R2â¯=â¯0.9996) for carbaryl, respectively. The limits of detection were 1.0 and 1.5⯵g/kg for carbendazim and carbaryl, respectively, in leafy vegetables. Recoveries ranged from 92.6% to 110.1%, and the relative standard deviations were less than 6.1%.
Asunto(s)
Bencimidazoles/química , Carbamatos/química , Carbaril/química , beta-Ciclodextrinas/química , Dióxido de SilicioRESUMEN
A new combination between selective polymer monolith microextraction (PMME) and sensitive differential pulse voltammetry (DPV) was developed for the determination of the phytohormone salicylic acid (SA) in Actinidia chinensis. A molecularly imprinted monolithic column (MIMC) thermally in-situ polymerized in a micropipette tip by using SA as a template, 4-vinyl pyridine (4-VP) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the mixed porogen of toluene and dodecanol, was employed for the microextraction of SA. The prepared MIMC was characterized by a Fourier transform infrared spectrometer (FI-TR), scanning electron microscope (SEM) and thermo gravimetric analysis (TGA). The results confirmed the binary continuous structure of the porous network. The extracted SA was determined by DPV on a graphene oxide (GO) modified electrode. The joint conditions between MIMC and DPV were investigated practically. Under the optimum conditions, SA could be determined selectively and sensitively in a linear range from 0.1 to 60.0 µg g-1. The limit of detection was 0.03 µg g-1 and the recoveries were between 86.2 and 105.2%. The proposed joint method was successfully used to determine SA in Actinidia chinensis.
Asunto(s)
Actinidia/química , Grafito/química , Impresión Molecular , Óxidos/química , Ácido Salicílico/análisis , Electrodos , Microextracción en Fase Líquida , Polímeros/química , Piridinas/químicaRESUMEN
Here we report a facile in situ solvothermal growth method for immobilization of metal-organic framework-ionic liquid functionalized graphene (MOF-5/ILG) composite on etched stainless steel wire. The X-ray diffraction spectra, scanning electron microscopy and transmission electron microscopy images showed that the metal organic framework possessed good crystal shape and its structure was not disturbed by the introduction of ILG. Moreover, the covalent bond established between the amino group of ILG and the carboxylic group of the metal organic framework improved the mechanical stability and structure uniformity of the microcrystals. The obtained material combined the favorable attributes of both metal-organic framework and ILG, having high surface area (820 m(2)/g) and good adsorption capability. Its adsorption properties were explored by preconcentrating chloramphenicol and thiamphenicol from aqueous solutions prior to gas chromatography-flame ionization detection. The MOF-5/ILG exhibited high enrichment capacity for the analytes as they could interact through π-π and H-bonding interaction. Under the optimum conditions, good linearity (correlation coefficients higher than 0.9981), low limits of detection (14.8-19.5 ng/L), and good precision (relative standard deviations less than 6.0% (n=5)) were achieved. The MOF-5/ILG composite displayed durable property. The method was applied to the determination of two antibiotics in milk, honey, urine and serum samples with acceptable relative recoveries of 82.3-103.2%.
Asunto(s)
Antibacterianos/análisis , Cloranfenicol/análisis , Grafito/química , Líquidos Iónicos/química , Nanocompuestos/química , Tianfenicol/análisis , Adsorción , Animales , Antibacterianos/sangre , Antibacterianos/orina , Cloranfenicol/sangre , Cloranfenicol/orina , Ionización de Llama , Miel/análisis , Leche/química , Acero Inoxidable , Tianfenicol/sangre , Tianfenicol/orinaRESUMEN
The present work reports the electrochemical fabrication of an ionic liquid functionalized multiwalled carbon nanotubes-polyaniline (MWCNT@IL/PANI) nanocomposite coating and its application in the headspace-solid phase microextraction (HS-SPME) and gas chromatography (GC) determination of benzoic acid esters (i.e., methyl benzoate, ethyl benzoate, propyl benzoate and butyl benzoate). The MWCNTs was firstly functionalized with amine-terminated IL (MWCNT@IL) through chemical reduction, and then was doped in PANI during the electropolymerization of aniline. The resulting coating was characterized by infrared spectroscopy, field emission scanning electron microscopy and thermo gravimetry. It showed net-like structure and had high thermal stability (up to 330°C). Furthermore, it presented high selectivity for the four benzoic acid esters and thus suited for their HS-SPME-GC determination. Results showed that under optimized extraction conditions, the detection limits were less than 6.1ngL(-1) (S/N=3) and the linear detection ranges were 0.012-50µgL(-1) (R≥0.9957) for these analytes. The relative standard deviations (RSDs) were lower than 6.4% for five successive measurements with one fiber, and the RSDs for fiber-to-fiber were 4.4-9.6% (n=5). The developed method was successfully applied to the determination of these benzoic acid esters in perfume samples.
Asunto(s)
Compuestos de Anilina/química , Ésteres/aislamiento & purificación , Nanotubos de Carbono/química , Microextracción en Fase Sólida/métodos , Contaminantes Químicos del Agua/aislamiento & purificación , Ácido Benzoico/química , Cromatografía de Gases , Ésteres/química , Líquidos Iónicos/química , Límite de Detección , Contaminantes Químicos del Agua/análisisRESUMEN
A novel proton-type ionic liquid doped polyaniline (HIL-doped PANI) coating was presented, which was prepared on a stainless steel wire by electrodeposition in an aqueous solution containing aniline and 1-sulfobutyl-3-methylimidazolium hydrosulfate. The HIL-doped PANI coating showed granular nanostructure and had large specific surface. When it was applied to the headspace solid-phase microextraction of several amines (i.e., aniline, N-methylaniline, 3-methylaniline, 2-chloroaniline and 3-chloroaniline), it showed high extraction efficiency. The enrichment factors were 191.8-343.9 for different amines, much higher than those of common PANI and commercial polydimethylsiloxane/divinylbenzene coatings. Coupled with gas chromatographic analysis, the linear ranges were 0.097-100 µg/L with correlation coefficients above 0.9942, and the detection limits were 0.012-0.048 µg/L (S/N=3) for different amines. The relative standard deviations (RSD) were smaller than 8.1% for five successive measurements with single fiber and the fiber-to-fiber RSDs were 8.6-13.8% (n=5) for these amines. The proposed method was successfully applied to the extraction and determination of amines in organic waste water samples, and the recoveries were 78.3-112.8% for different analytes.
Asunto(s)
Aminas/análisis , Compuestos de Anilina/química , Cromatografía de Gases , Líquidos Iónicos/química , Aminas/aislamiento & purificación , Compuestos de Anilina/análisis , Compuestos de Anilina/aislamiento & purificación , Concentración de Iones de Hidrógeno , Límite de Detección , Nanoestructuras/química , Nanoestructuras/ultraestructura , Protones , Microextracción en Fase Sólida , Propiedades de Superficie , Temperatura , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificaciónRESUMEN
A nanostructural polyaniline-poly(propylene oxide) (PANI-PPO) composite coating was electrochemically synthesized on a stainless steel wire, by using acidic ionic liquid 1-sulfobutyl-3-methylimidazolium hydrosulfate as supporting electrolyte. The coating showed strong hydrophobicity and allowed for the direct immersion solid-phase microextraction of carbamate pesticides (i.e. 2-(1-methylethoxy) phenyl methylcarbamate, m-tolyl-n-methylcarbamate, 2-(1-methylethyl) phenyl methylcarbamate, 2-(1-methylpropyl) phenol methylcarbamate and 2,3-dihydro-2,2-dimethyl-7-benzofuranyl methylcarbamate) in complex matrices. Moreover, this coating could be used for at least 120 times of extraction. When it was coupled with gas chromatography for the determination of these carbamate pesticides the linear ranges were about 0.1-100 µg L(-1) and the detection limits were 0.012-0.048 µg L(-1). It also displayed acceptable repeatability and reproducibility. When a fiber was used for five successive measurements the relative standard deviations (RSDs) were smaller than 8.7%, and the RSDs for fiber-to-fiber were 5.7-12.9% (n=5). The practical feasibility of the proposed method was evaluated by determining carbamate pesticides in vegetable samples and the recoveries for standards added were 79.8-108.8%.