Pharmaceutical, biomedical and ophthalmic applications of biodegradable polymers (BDPs): literature and patent review.

In the last few decades, the interest in biodegradable materials for biomedical applications has increased significantly. Both natural and synthetic biodegradable polymers (BDPs) have been broadly explored for various biomedical applications. These include sutures and wound dressings, screws for bone fracture, scaffolds in tissue engineering, implants, and other carriers for targeted and sustained release drug delivery. Owing to their unique characteristics, including their surface charge variable copolymer block and composition and film-forming properties, BDPs have been widely used as favourable materials for ophthalmic drug delivery. Mucoadhesive BDPs have been used in ophthalmic formulations to prolong drug retention time and improve bioavailability, allowing ophthalmic controlled release systems to design. Furthermore, BDPs-based implants, microneedles, and injectable nano- and micro-particles enabled ocular posterior segment targeting and, most importantly, circumvented the need for removing the delivery systems after application. This review outlines the major advances of BDPs and highlights the latest progress of employing natural and synthetic BDPs for various biomedical applications, emphasising the treatment and management of ophthalmic conditions.

Solid Dispersions of Gefitinib Prepared by Spray Drying with Improved Mucoadhesive and Drug Dissolution Properties.

Gefitinib is a tyrosine kinase inhibitor that is intended for oral administration yet suffers poor bioavailability along with undesirable side effects. To enhance its solubility and allow colon targeting, gefitinib (ZD) and blends of different ratios of polymers (ternary dispersion) were prepared in organic solution, and solid dispersions were generated employing the spray drying (SD) technique. The methylmethacrylate polymer Eudragit S 100 was incorporated for colon targeting; polyvinylpyrrolidone (PVP) and hydroxypropyl methyl cellulose (HPMC) were utilised to improve the solubility of ZD. SEM, DSC, XRPD, FT-IR, dissolution and cytotoxicity studies were undertaken to characterise and evaluate the developed formulations. SEM images revealed that the rod-shaped crystals of ZD were transformed into collapsed spheres with smaller particle size in the spray-dried particles. DSC, FTIR and XRPD studies showed that ZD loaded in the spray-dried dispersions was amorphous. ZD dissolution and release studies revealed that while a significant (P < 0.05) increase in the ZD dissolution and release was observed from HPMC-based solid dispersion at pH 7.2 (up to 95% in 15 h), practically no drug was released at pH 1.2 and pH 6.5. Furthermore, the HPMC-based solid dispersions displayed enhanced mucoadhesive properties compared with PVP-based ones. Interestingly, cell viability studies using the neutral red assay showed that PVP and HPMC-based solid dispersions had no additional inhibitory effect on Caco-2 cell line compared to the pure drug.

Alternative antimicrobials: the properties of fatty acids and monoglycerides.

With the rising antibiotic resistance of many bacterial species, alternative treatments are necessary to combat infectious diseases. The World Health Organization and the US Centres for Disease Control and Prevention have warned that some infections, such as those from Neisseria gonorrhoeae, may be untreatable within a few years. One avenue of exploration is the use of antimicrobial fatty acids and their derivatives for therapeutic prevention or treatment of bacterial infections. Several studies have explored the activity of fatty acids and their derivatives, including monoglycerides against a variety of bacterial species. These are reviewed here, assessing the antimicrobial properties that have been demonstrated and the feasibility of therapeutic applications.

Preparation and optimization of monodisperse polymeric microparticles using modified vibrating orifice aerosol generator for controlled delivery of letrozole in breast cancer therapy.

Letrozole (LTZ) is effective for the treatment of hormone-receptor-positive breast cancer in postmenopausal women. In this work, and for the first time, using vibrating orifice aerosol generator (VOAG) technology, monodisperse poly-ε-caprolactone (PCL), and poly (D, L-Lactide) (PDLLA) LTZ-loaded microparticles were prepared and found to elicit selective high cytotoxicity against cancerous breast cells with no apparent toxicity on healthy cells in vitro. Plackett-Burman experimental design was utilized to identify the most significant factors affecting particle size distribution to optimize the prepared particles. The generated microparticles were characterized in terms of microscopic morphology, size, zeta potential, drug entrapment efficiency, and release profile over one-month period. Long-term cytotoxicity of the microparticles was also investigated using MCF-7 human breast cancer cell lines in comparison with primary mammary epithelial cells (MEC). The prepared polymeric particles were monodispersed, spherical, and apparently smooth, regardless of the polymer used or the loaded LTZ concentration. Particle size varied from 15.6 to 91.6 µm and from 22.7 to 99.6 µm with size distribution (expressed as span values) ranging from 0.22 to 1.24 and from 0.29 to 1.48 for PCL and PDLLA based microparticles, respectively. Upon optimizing the manufacture parameters, span was reduced to 0.162-0.195. Drug entrapment reached as high as 96.8%, and drug release from PDLLA and PCL followed a biphasic zero-order release using 5 or 30% w/w drug loading in the formulations. Long-term in vitro cytotoxicity studies indicated that microparticles formulations significantly inhibited the growth of MCF-7 cell line over a prolonged period of time but did not have toxic effects on the normal breast epithelial cells.

The use of albumin solid dispersion to enhance the solubility of unionizable drugs.

In this study, solid dispersions of prednisolone (PRD) and bovine serum albumin (BSA) were prepared by spray drying and freeze drying methods using a PRD:BSA solution [20:1 molar ratio (MR)]. PRD-BSA dispersed mixtures were characterized by scanning electron microscopy (SEM), and powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC). PRD-BSA physical and dispersed mixtures showed significantly higher solubility in water than that of unprocessed drug. Enhancement factor of six was obtained in both physical mixture and solid dispersion solubility studies. In-vitro dissolution and release studies under physiological conditions showed an immediate release of PRD from the solid dispersions, with almost 90% of the drug dissolved in the first 10 min. PRD was immediately released from BSA binding complex. This study demonstrates the potential for the use of BSA to enhance the solubility and dissolution rate, hence bioavailability, of the unionizable drugs.

Formulation and corneal permeation of ketorolac tromethamine-loaded chitosan nanoparticles.

The aim of this work was to formulate chitosan (CS)-based nanoparticles (NPs) loaded with ketorolac tromethamine (KT) intended for topical ocular delivery. NPs were prepared using ionic gelation method incorporating tri-polyphosphate (TPP) as cross-linker. Following the preparation, the composition of the system was optimized in terms of their particle size, zeta potential, entrapment efficiency (EE) and morphology, as well as performing structural characterization studies using Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). The data suggested that the size of the NPs was affected by CS/TPP ratio where the diameter of the NPs ranged from 108.0 ± 2.4 nm to 257.2 ± 18.6 nm. A correlation between drug EE and the corresponding drug concentration added to the formulation was observed, where the EE of the NPs increased with increasing drug concentration, for up to 10 mg/mL. FT-IR and DSC revealed that KT was dispersed within the NPs where the phosphate groups of TPP were associated with the ammonium groups of CS. The in vitro release profile of KT from CS NPs showed significant differences (p < 0.05) compared to KT solution. Furthermore, mucoadhesion studies revealed adhesive properties of the formulated NPs. The KT-loaded NPs were found to be stable when stored at different storage conditions for a period of 3 months. The ex vivo corneal permeation studies performed on excised porcine eye balls confirmed the ability of NPs in retaining the drug on the eye surface for a relatively longer time. These results demonstrate the potential of CS-based NPs for the ocular delivery of KT.

Critical appraisal of alternative irritation models: three decades of testing ophthalmic pharmaceuticals.

BACKGROUND: Testing ocular tolerability of ocular pharmaceuticals is an essential regulatory requirement. The current approved reference model (gold standard) for ocular irritation testing is the Draize test. However this method is subjective and involves using live animals, hence the need to develop alternative in vitro and ex vivo testing strategies. SOURCE OF DATA: Pubmed, Science Direct, Scopus, Google Scholar, Medline, Current Content, Web of Science and validation reports from international regulatory bodies; The Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) and European Centre for the Validation of Alternative Methods (ECVAM) were searched for in vitro alternatives. AREA OF AGREEMENT: Whilst no single in vitro test can effectively replace the Draize eye irritation test, regulatory bodies and cosmetic/pharmaceutical industries agree that there is a need for in vitro alternatives with validated endpoints to evaluate pharmaceutical ingredients and finished eye products. AREA OF CONTROVERSY: There is no single in vitro test / assay that can predict the ocular irritation potential of mild to moderate test substances. AREA TIMELY FOR DEVELOPING RESEARCH: This review provides a critical appraisal of the selected in vitro and ex vivo ocular toxicity models recommended by international regulatory bodies. These include cytotoxicity methods, biochemical systems and ex vivo assays. The latter are approved by ECVAM as in vitro alternatives for the well-known Draize test. Hen's egg test-chorioallantoic membrane and the isolated rabbit eye test are also accepted by regulatory agencies in France, Germany, the Netherlands and the UK. A combination of ex vivo assays along with histological examination of excised bovine cornea can predict the conjunctival and corneal tolerability and cover a wider range of ocular pharmaceutical substances.

Analysis of 2-oxothiazolidine-4-carboxylic acid by hydrophilic interaction liquid chromatography: application for ocular delivery using chitosan nanoparticles.

Oxidative damage due to low levels of glutathione (GSH) is one of the main causes of cataract formation. It has been reported that 2-oxothiazolidine-4-carboxylic acid (OTZ), a cysteine prodrug, can increase the cellular level of GSH. Currently, there is no analytical method to separate and quantify OTZ from aqueous humour samples for cataract research. The present study aims to develop and validate a hydrophilic interaction liquid chromatography (HILIC) method for the quantification of OTZ in simulated aqueous humour (SAH). The developed method was validated according to FDA guidelines. Accuracy, precision, selectivity, sensitivity, linearity, lower limit of quantification (LLOQ), lower limit of detection (LLOD) and stability were the parameters assessed in the method validation. The developed method was found to be accurate and precise with LLOQ and LLOD of 200 and 100 ng/mL, respectively; method selectivity was confirmed by the absence of any matrix interference with the analyte peak. The constructed calibration curve was linear in the range of 0.2-10 µg/mL, with a regression coefficient of 0.999. In addition, the OTZ was found to be stable in SAH after three freeze/thaw cycles. Chitosan nanoparticles loaded with OTZ were formulated by the ionic gelation method. The nanoparticles were found to be uniform in shape and well dispersed with average size of 153 nm. The in vitro release of OTZ from the nanoparticles was quantified using the developed analytical method over 96 h. Permeation of OTZ through excised bovine cornea was measured using HILIC. The lag time and the flux were 0.2 h and 3.05 µg/cm(2) h, respectively.

Preparation and characterization of progesterone dispersions using supercritical carbon dioxide.

CONTEXT: Supercritical fluid methods offer an alternative to conventional mixing methods, particularly for heat sensitive drugs and where an organic solvent is undesirable. OBJECTIVE: To design, develop and construct a unit for the particles from a gas-saturated suspension/solution (PGSS) method and form endogenous progesterone (PGN) dispersion systems using SC-CO2. MATERIALS AND METHODS: The PGN dispersions were manufactured using three selected excipients: polyethylene glycol (PEG) 400/4000 (50:50), Gelucire 44/14 and D-α-tocopheryl PEG 1000 succinate (TPGS). Semisolid dispersions of PGN prepared by PGSS method were compared to the conventional methods; comelting (CM), cosolvent (CS) and physical mixing (PM). The dispersion systems made were characterized by Raman and Fourier transform infrared (FTIR) spectroscopies, X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), PGN recovery, uniformity and in vitro dissolution, analyzed by high-performance liquid chromatography (HPLC). RESULTS: Raman spectra revealed no changes in the crystalline structure of PGN treated with SC-CO2 compared to that of untreated PGN. XRPD and FTIR showed the presence of peaks and bands for PGN confirming that PGN has been incorporated well with each individual excipient. All PGN dispersions prepared by the PGSS method resulted in the improvement of PGN dissolution rates compared to that prepared by the conventional methods and untreated PGN after 60 min (p value < 0.05). CONCLUSION: The novel PGN dispersions prepared by the PGSS method offer the great potential to enhance PGN dissolution rate, reduce preparation time and form stable crystalline dispersion systems over those prepared by conventional methods.

Evaluation of progesterone permeability from supercritical fluid processed dispersion systems.

The aim of this study was to investigate the permeability of unique dispersion systems prepared by supercritical fluid (SCF) processing, to deliver bioidentical progesterone (PGN) across mouse skin. Semisolid dispersions of PGN were made up of either polyethylene glycol (PEG) 400/4000, Gelucire 44/14, d-α-tocopheryl PEG 1000 succinate (TPGS), tanscutol P or myritol 318. SCF dispersion systems were compared with various control formulations; a market cream, aqueous suspension, and three conventionally prepared dispersions – comelted, cosolvent and physically mixed systems. The permeability coefficient in the absence or presence of a permeation enhancer was evaluated using ex vivo mouse skin. The permeation study results for the TPGS/myritol/transcutol P dispersion system prepared using supercritical carbon dioxide (SC-CO2) had a two-fold improvement in transdermal permeation over 24 h compared to the control formulation, 245.7 and 126 µg cm(-2), respectively (p value < 0.05). In this study, the skin integrity and morphology was also investigated for changes due to the formulation constituents using histological examination and Fourier transform infrared spectroscopy. The particles from the gas-saturated suspension method and SC-CO2 together with TPGS/myritol/transcutol P may offer potential advantages over the available cream on the market based on the vastly improved lag time and flux of PGN across the skin.

Exploring the Ocular Absorption Pathway of Fasudil Hydrochloride towards Developing a Nanoparticulate Formulation with Improved Performance.

Rho-kinase (ROCK) inhibitors represent a new category of anti-glaucoma medications. Among them, Fasudil hydrochloride, a selective ROCK inhibitor, has demonstrated promising outcomes in glaucoma treatment. It works by inhibiting the ROCK pathway, which plays a crucial role in regulating the trabecular meshwork and canal of Schlemm's aqueous humor outflow. This study aims to investigate the ocular absorption pathway of Fasudil hydrochloride and, subsequently, develop a nanoparticle-based delivery system for enhanced corneal absorption. Employing the ionic gelation method and statistical experimental design, the factors influencing chitosan nanoparticle (Cs NP) characteristics and performance were explored. Fasudil in vitro release and ex vivo permeation studies were performed, and Cs NP ocular tolerability and cytotoxicity on human lens epithelial cells were evaluated. Permeation studies on excised bovine eyes revealed significantly higher Fasudil permeation through the sclera compared to the cornea (370.0 µg/cm2 vs. 96.8 µg/cm2, respectively). The nanoparticle size (144.0 ± 15.6 nm to 835.9 ± 23.4 nm) and entrapment efficiency range achieved (17.2% to 41.4%) were predominantly influenced by chitosan quantity. Cs NPs showed a substantial improvement in the permeation of Fasudil via the cornea, along with slower release compared to the Fasudil aqueous solution. The results from the Hen's Egg Test Chorioallantoic Membrane (HET-CAM) and Bovine Corneal Opacity and Permeability (BCOP) tests indicated good conjunctival and corneal biocompatibility of the formulated chitosan nanoparticles, respectively. Lens epithelial cells displayed excellent tolerance to low concentrations of these nanoparticles (>94% cell viability). To the best of our knowledge, this is the first report on the ocular absorption pathway of topically applied Fasudil hydrochloride where the cornea has been identified as a potential barrier that could be overcome using Cs NPs.

In situ gelling systems for ocular drug delivery.

In situ gelling systems represent a burgeoning paradigm in ocular drug administration, addressing intrinsic challenges posed by extant ocular formulations, such as compromised bioavailability and constraints in traversing the corneal barrier. This systematic review endeavours to comprehensively examine the contemporary landscape of research in this domain, focusing on the nuanced capabilities of in situ gelling systems to optimize drug delivery and enhance therapeutic outcomes, without much technological complexity. Employing a meticulous search strategy across diverse databases for publications and patents spanning the years 2015 to 2023 a total of 26 research papers and 14 patents meeting stringent inclusion criteria were identified. Synthesizing the collective insights derived from these investigations, it becomes evident that in situ gelling systems confer an ability to protract the residence time of formulations or active pharmaceutical ingredients (APIs) within the ocular milieu. This sustained presence engenders extended drug release kinetics, thereby fostering improved patient compliance and mitigating the proclivity for side effects attendant to frequent dosing. These salutary effects extend to diminished systemic drug absorption, augmented ocular bioavailability, and the prospect of reduced dosing frequencies, thereby amplifying patient adherence to therapeutic regimens. Intriguingly, the protective attributes of in situ gelling systems extend to the establishment of an ocular surface barrier, thereby abating the susceptibility to infections and inflammatory responses. In summation, this review underscores the auspicious potential of in situ gelling systems as a transformative approach to advancing ocular drug delivery, warranting sustained research endeavours and developmental initiatives for the betterment of global patient outcomes.

The Potential of Selenium-Based Therapies for Ocular Oxidative Stress.

Oxidative stress plays a critical role in the development of chronic ocular conditions including cataracts, age-related macular degeneration, and diabetic retinopathy. There is a need to explore the potential of topical antioxidants to slow the progression of those conditions by mediating oxidative stress and maintaining ocular health. Selenium has attracted considerable attention because it is a component of selenoproteins and antioxidant enzymes. The application of selenium to a patient can increase selenoprotein expression, counteracting the effect of reactive oxygen species by increasing the presence of antioxidant enzymes, and thus slowing the progression of chronic ocular disorders. Oxidative stress effects at the biomolecular level for prevalent ocular conditions are described in this review along with some of the known defensive mechanisms, with a focus on selenoproteins. The importance of selenium in the eye is described, along with a discussion of selenium studies and uses. Selenium's antioxidant and anti-inflammatory qualities may prevent or delay eye diseases. Recent breakthroughs in drug delivery methods and nanotechnology for selenium-based ocular medication delivery are enumerated. Different types of selenium may be employed in formulations aimed at managing ocular oxidative stress conditions.

Efficient removal of antibiotics from water by highly crosslinked metal-alginate particles: Preparation, isotherms, kinetics, and microbiological assay.

Traces of antibiotics reaching aquatic environment lead to the emergence of antimicrobial resistance (AMR). The efficient removal of antibiotics (ATBs) traces from wastewater is essential to tackle the AMR. In this study, a novel solid-state crosslinking method of alginate (ALG) was developed and applied to specifically remove ATBs from water. A wide range of crosslinkers (Ca2+, Zn2+, Cu2+, Ni2+, Fe3+ and Al3+) was used and the crosslinking nature, density, and distribution were evidenced by FTIR, ICP-MS, and SEM-EDS. Compared with ionotropic gelation, the novel solid-state crosslinking method proved superior in term of ease of production, high crosslinking degree, and ATBs removal capacity. Fe-ALG and Zn-ALG showed high removal capacity of ciprofloxacin (356.5 mg/g and 928.6 mg/g) and doxycycline (90 mg/g and 690 mg/g), however, they were less effective toward amoxicillin (11.5 mg/g and 6 mg/g). Removal isotherms and kinetics followed type I and pseudo-second order suggesting a chemisorption removal mechanism. Fe-ALG was successfully regenerated with no loss in ATB removal capacity. The microbiological assay showed significant reductions of antibacterial activities after ATBs removal from water. Overall, metal-ALG systems obtained by solid-state crosslinking are promising for ATBs removal from wastewater giving the ease of production, high efficiency, regenerability, and scalability potential.

Optimization of PLGA nanoparticles formulation containing L-DOPA by applying the central composite design.

The aim of this work was to prepare L-DOPA loaded poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles by a modified water-in-oil-in-water (W(1)/O/W(2)) emulsification solvent evaporation method. A central composite design was applied for optimization of the formulation parameters and for studying the effects of three independent variables: PLGA concentration, polyvinyl alcohol (PVA) concentration and organic solvent removal rate on the particle size and the entrapment efficiency (response variables). Second-order models were obtained to adequately describe the influence of the independent variables on the selected responses. The analysis of variance showed that the three independent variables had significant effects (p < 0.05) on the responses. The experimental results were in perfect accordance with the predictions estimated by the models. Using the desirability approach and overlay contour plots, the optimal preparation area can be highlighted. It was found that the optimum values of the responses could be obtained at higher concentration of PLGA (5%, w/v) and PVA (6%, w/v); and faster organic solvent removal rate (700 rpm). The corresponding particle size was 256.2 nm and the entrapment efficiency was 62.19%. FTIR investigation confirmed that the L-DOPA and PLGA polymer maintained its backbone structure in the fabrication of nanoparticles. The scanning electron microscopic images of nanoparticles showed that all particles had spherical shape with porous outer skin. The results suggested that PLGA nanoparticles might represent a promising formulation for brain delivery of L-DOPA. The preparation of L-DOPA loaded PLGA nanoparticles can be optimized by the central composite design.

Determination of pKa and forced degradation of the indoloquinoline antimalarial compound cryptolepine hydrochloride.

The study was aimed at determining the acid dissociation constant of cryptolepine hydrochloride and its degradation under stressed conditions. The pKa was determined using buffers in the pH range 10.4-11.6 by spectrophotometry at controlled measurement temperature (20 ± 0.5°C). The stability of the compound was investigated under various stressed conditions including neutral, acid, alkaline, light, dry heat and oxidation at different temperatures. Degradation products were analysed by HPLC. The calculated pKa values (uncorrected and corrected for ionic strength) were 11.09 ± 0.03 and 10.99 ± 0.05, respectively. A graphical approach yielded an uncorrected pKa value of 11.07. Degradation of the compound in water, 0.1 M HCl, 0.1 M NaOH and 3% hydrogen peroxide followed a first order reaction. With proper temperature control and maintenance of uniform ionic strength, a reproducible pKa of cryptolepine is obtainable by spectrophotometry. The compound was found to be highly susceptible to oxidation and relatively stable in neutral and acidic conditions but less so in a basic medium. There were no significant changes in concentration of samples exposed to light and dry heat at 60°C over the study period.

Recent Advances of Ocular Drug Delivery Systems: Prominence of Ocular Implants for Chronic Eye Diseases.

Chronic ocular diseases can seriously impact the eyes and could potentially result in blindness or serious vision loss. According to the most recent data from the WHO, there are more than 2 billion visually impaired people in the world. Therefore, it is pivotal to develop more sophisticated, long-acting drug delivery systems/devices to treat chronic eye conditions. This review covers several drug delivery nanocarriers that can control chronic eye disorders non-invasively. However, most of the developed nanocarriers are still in preclinical or clinical stages. Long-acting drug delivery systems, such as inserts and implants, constitute the majority of the clinically used methods for the treatment of chronic eye diseases due to their steady state release, persistent therapeutic activity, and ability to bypass most ocular barriers. However, implants are considered invasive drug delivery technologies, especially those that are nonbiodegradable. Furthermore, in vitro characterization approaches, although useful, are limited in mimicking or truly representing the in vivo environment. This review focuses on long-acting drug delivery systems (LADDS), particularly implantable drug delivery systems (IDDS), their formulation, methods of characterization, and clinical application for the treatment of eye diseases.

Pharmacological treatment strategies of pterygium: Drugs, biologics, and novel natural products.

Pterygium is a fibrovascular tissue growth invading the cornea. Adjunctive treatment post-surgery includes conventional immunosuppressants as well as antiviral drugs. The use of large- and small-molecule antivascular endothelial growth factor (VEGF) agents remains an integral part of pterygium treatment as well as other neovascular conditions of the eye. Naturally occurring polyphenolic compounds have favorable characteristics for treating neovascular and inflammatory eye conditions, including good efficacy, stability, cost-effectiveness, and the versatility of their chemical synthesis. In this review, we discuss pharmacological treatments of pterygium. Natural products, such curcumin, ellagic acid, and chalcones, are reviewed, with emphasis on their potential as future pterygium treatments.

Maillard Reaction Crosslinked Alginate-Albumin Scaffolds for Enhanced Fenofibrate Delivery to the Retina: A Promising Strategy to Treat RPE-Related Dysfunction.

There are limited treatments currently available for retinal diseases such as age-related macular degeneration (AMD). Cell-based therapy holds great promise in treating these degenerative diseases. Three-dimensional (3D) polymeric scaffolds have gained attention for tissue restoration by mimicking the native extracellular matrix (ECM). The scaffolds can deliver therapeutic agents to the retina, potentially overcoming current treatment limitations and minimizing secondary complications. In the present study, 3D scaffolds made up of alginate and bovine serum albumin (BSA) containing fenofibrate (FNB) were prepared by freeze-drying technique. The incorporation of BSA enhanced the scaffold porosity due to its foamability, and the Maillard reaction increased crosslinking degree between ALG with BSA resulting in a robust scaffold with thicker pore walls with a compression modulus of 13.08 KPa suitable for retinal regeneration. Compared with ALG and ALG-BSA physical mixture scaffolds, ALG-BSA conjugated scaffolds had higher FNB loading capacity, slower release of FNB in the simulated vitreous humour and less swelling in water and buffers, and better cell viability and distribution when tested with ARPE-19 cells. These results suggest that ALG-BSA MR conjugate scaffolds may be a promising option for implantable scaffolds for drug delivery and retinal disease treatment.