Sorafenib and Piperine co-loaded PLGA nanoparticles: Development, characterization, and anti-cancer activity against hepatocellular carcinoma cell line.

Hepatocellular carcinoma (HCC) exhibits high mortality rates in the advanced stage (>90 %). Sorafenib (SORA) is a targeted therapy approved for the treatment of advanced HCC; however, the reported response rate to such a therapeutic is suboptimal (<3%). Piperine (PIP) is an alkaloid demonstrated to exert a direct tumoricidal activity in HCC and improve the pharmacokinetic profiles of anticancer drugs including SORA. In this study, we developed a strategy to improve efficacy outcomes in HCC using PIP as an add-on treatment to support the first-line therapy SORA using biodegradable Poly (D, L-Lactide-co-glycolide, PLGA) nanoparticles (NPs). SORA and PIP (both exhibit low aqueous solubility) were co-loaded into PLGA NPs (PNPs) and stabilized with various concentrations of polyvinyl alcohol (PVA). The SORA and PIP-loaded PNPs (SP-PNPs) were characterized using Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Powder Diffraction (XRD), Dynamic Light Scattering (DLS), and Scanning Electron Microscopy (SEM), Release of these drugs from SP-PNPs was investigated in vitro at both physiological and acidic pH, and kinetic models were employed to assess the mechanism of drug release. The in vitro efficacy of SP-PNPs against HCC cells (HepG2) was also evaluated. FTIR and XRD analyses revealed that the drugs encapsulated in PNPs were in an amorphous state, with no observed chemical interactions among the drugs or excipients. Assessment of drug release in vitro at pH 5 and 7.4 showed that SORA and PIP loaded in PNPs with 0.5 % PVA were released in a sustained manner, unlike pure drugs, which exhibited relatively fast release. SP-PNPs with 0.5 % PVA were spherical, had an average size of 224 nm, and had a high encapsulation efficiency (SORA âˆ¼ 82 %, PIP âˆ¼ 79 %), as well as superior cytotoxicity compared to SORA monotherapy in vitro. These results suggest that combining PIP with SORA using PNPs may be an effective strategy for the treatment of HCC and may set the stage for a comprehensive in vivo study to evaluate the efficacy and safety of this novel formulation using a murine HCC model.

Role of Polymeric Micelles in Ocular Drug Delivery: An Overview of Decades of Research.

Local drug delivery to the eye through conventional means has faced many challenges due to three essential barriers: (a) the complex structure of the cornea limiting drug absorption, (b) the capacity of ocular absorptive cells in drug metabolism, and (c) the washing effect of eye tears. Polymeric micelles (PMs) have been the focus of much interest for ocular drug delivery due to several advantages they provide for this application, including the capacity for the solubilization of hydrophobic drugs, nonirritability, nanoscopic diameter, and the clarity of their aqueous solution not interfering with vision. The potential to increase the release and residence time of incorporated medication at the site of absorption is also a bonus advantage for these delivery systems. This Review covers research conducted on single or mixed micelles prepared from small amphiphilic molecules, copolymers (diblock, triblock, and graft), and gel systems containing micelles. The purpose of this review is to provide an update on the status of micellar ocular delivery systems for different indications, with a focus on preclinical and clinical drug development. In this context, we are discussing the anatomy of the eye, various ocular barriers, different micellar formulations, and their benefits in ocular drug delivery, as well as the role of PMs in the management of ocular diseases both in preclinical models and in clinic. The encouraging preclinical effectiveness findings from experiments conducted in both laboratory settings and live animals have paved the way for the advancement of micellar systems in clinical trials for ocular administration and the first nanomicallar formulation approved for clinical use by the United States Food and Drug Administration (marketed as Cequa by Sun Pharmaceuticals).

Hepatoprotective and Antioxidant Effects of Nanopiperine against Cypermethrin via Mitigation of Oxidative Stress, Inflammations and Gene Expression Using qRT-PCR.

Cypermethrin (Cyp) is a pyrethroid that has been associated with the toxicity of various organs. The aim of our study was to evaluate the hepatoprotective and antioxidant activities of nano-piperine (NP) against Cyp toxicity. Cyp (50 mg/kg) was administered orally in all animals of groups III-VI for 15 days. Groups IV-VI each received three doses of NP (125, 250, and 500 µg/kg/day) for 10 days after receiving the Cyp dosage, which was given after 1 h. A rise in serum biomarkers (ALT, AST, ALP, total protein, and albumin), which are indicators of toxicity alongside anomalous oxidative stress indices (lipid peroxidation (LPO), glutathione (GSH), superoxide dismutase (SOD) and catalase), was detected. After Cyp treatment, we observed upregulated cytokines, caspase expression, and histological analysis that the showed distortion of cell shape. However, the administration of NP dramatically reversed all of the Cyp-induced alterations, inducing reductions in serum marker levels, stress level, the production of cytokines, and caspase expression. Additionally, all of the histopathological alterations were minimized to values that were comparable to normal levels. The present findings suggested that NP exhibits potent antioxidant and anti-inflammatory activities that can protect rats' livers against Cyp-induced liver damage through hepatoprotective activities.

Perspectives of Positively Charged Nanocrystals of Tedizolid Phosphate as a Topical Ocular Application in Rabbits.

The aim of this study was the successful utilization of the positively charged nanocrystals (NCs) of Tedizolid Phosphate (TZP) (0.1% w/v) for topical ocular applications. TZP belongs to the 1, 3-oxazolidine-2-one class of antibiotics and has therapeutic potential for the treatment of many drug-resistant bacterial infections, including eye infections caused by MRSA, penicillin-resistant Streptococcus pneumonia and vancomycin-resistant Enterococcus faecium. However, its therapeutic usage is restricted due to its poor aqueous solubility and limited ocular availability. It is a prodrug and gets converted to Tedizolid (TDZ) by phosphatases in vivo. The sterilized NC1 was subjected to antimicrobial testing on Gram-positive bacteria. Ocular irritation and pharmacokinetics were performed in rabbits. Around a 1.29 to 1.53-fold increase in antibacterial activity was noted for NC1 against the B. subtilis, S. pneumonia, S. aureus and MRSA (SA-6538) as compared to the TZP-pure. The NC1-AqS was "practically non-irritating" to rabbit eyes. There was around a 1.67- and 1.43 fold increase in t1/2 (h) and Cmax (ngmL-1) while there were 1.96-, 1.91-, 2.69- and 1.41-times increases in AUC0-24h,AUC0-∞,AUMC0-∞ and MRT0-∞, respectively, which were found by NC1 as compared to TZP-AqS in the ocular pharmacokinetic study. The clearance of TDZ was faster (11.43 mLh-1) from TZP-AqS as compared to NC1 (5.88 mLh-1). Relatively, an extended half-life (t1/2; 4.45 h) of TDZ and the prolonged ocular retention (MRT0-∞; 7.13 h) of NC1 was found, while a shorter half-life (t1/2; 2.66 h) of TDZ and MRT0-∞(t1/2; 5.05 h)was noted for TZP-AqS, respectively. Cationic TZP-NC1 could offer increased transcorneal permeation, which could mimic the improved ocular bioavailability of the drug in vivo. Conclusively, NC1 of TZP was identified as a promising substitute for the ocular delivery of TZP, with better performance as compared to its conventional AqS.

Pharmacokinetic and Tissue Distribution of Orally Administered Cyclosporine A-Loaded poly(ethylene oxide)-block-Poly(ε-caprolactone) Micelles versus Sandimmune® in Rats.

PURPOSE: We have previously reported on a polymeric micellar formulation of Cyclosporine A (CyA) based on poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO5K-b-PCL13K) capable of changing drug biodistribution and pharmacokinetic profile following intravenous administration. The objective of the present study was to explore the potential of this formulation in changing the tissue distribution and pharmacokinetics of the encapsulated CyA following oral administration making comparisons with Sandimmune®. METHODS: The in vitro CyA release and stability CyA-loaded PEO-b-PCL micelles (CyA-micelles) were evaluated in biorelevant media. The pharmacokinetics and tissue distribution of orally administered CyA-micelles or Sandimmune® and tissue distribution of traceable Cyanine-5.5 (Cy5.5)-conjugated PEO-b-PCL micelles were then investigated in healthy rats. RESULTS: CyA-micelles showed around 60-70% CyA release in simulated intestinal and gastric fluids within 24 h, while Sandimmune® released its entire CyA content in the simulated intestinal fluid. CyA-micelles and Sandimmune® showed similar pharmacokinetics, but different tissue distribution profile in rats. In particular, the calculated AUC for CyA-micelles was higher in liver, comparable in heart, and lower in spleen, lungs, and kidneys when compared to that for Sandimmune®. CONCLUSIONS: The results point to the influence of excipients in Sandimmune® on CyA disposition and more inert nature of PEO-b-PCL micelles in defining CyA biological interactions.

Design and Development of D‒α‒Tocopheryl Polyethylene Glycol Succinate‒block‒Poly(ε-Caprolactone) (TPGS-b-PCL) Nanocarriers for Solubilization and Controlled Release of Paclitaxel.

The objective of this study was to synthesize and characterize a set of biodegradable block copolymers based on TPGS-block-poly(ε-caprolactone) (TPGS-b-PCL) and to assess their self-assembled structures as a nanodelivery system for paclitaxel (PAX). The conjugation of PCL to TPGS was hypothesized to increase the stability and the drug solubilization characteristics of TPGS micelles. TPGS-b-PCL copolymer with various PCL/TPGS ratios were synthesized via ring opening bulk polymerization of ε-caprolactone using TPGS, with different molecular weights of PEG (1-5 kDa), as initiators and stannous octoate as a catalyst. The synthesized copolymers were characterized using 1H NMR, GPC, FTIR, XRD, and DSC. Assembly of block copolymers was achieved via the cosolvent evaporation method. The self-assembled structures were characterized for their size, polydispersity, and CMC using dynamic light scattering (DLS) technique. The results from the spectroscopic and thermal analyses confirmed the successful synthesis of the copolymers. Only copolymers that consisted of TPGS with PEG molecular weights ≥ 2000 Da were able to self-assemble and form nanocarriers of ≤200 nm in diameter. Moreover, TPGS2000-b-PCL4000, TPGS3500-b-PCL7000, and TPGS5000-b-PCL15000 micelles enhanced the aqueous solubility of PAX from 0.3 µg/mL up to 88.4 ug/mL in TPGS5000-b-PCL15000. Of the abovementioned micellar formulations, TPGS5000-b-PCL15000 showed the slowest in vitro release of PAX. Specifically, the PAX-loaded TPGS5000-b-PCL15000 micellar formulation showed less than 10% drug release within the first 12 h, and around 36% cumulative drug release within 72 h compared to 61% and 100% PAX release, respectively, from the commercially available formulation (Ebetaxel®) at the same time points. Our results point to a great potential for TPGS-b-PCL micelles to efficiently solubilize and control the release of PAX.

Bioactive Apigenin loaded oral nano bilosomes: Formulation optimization to preclinical assessment.

AIM: Diabetic (type-2) is a metabolic disease characterized by increased blood glucose level from the normal level. In the present study, apigenin (AG) loaded lipid vesicles (bilosomes: BIL) was prepared, optimized and evaluated for the oral therapeutic efficacy. EXPERIMENTAL: AG-BIL was prepared by a thin-film evaporation method using cholesterol, span 60 and sodium deoxycholate. The prepared formulation was optimized by 3-factor and 3-level Box-Behnken design using particle size, entrapment efficiency and drug release as a response. The selected formulation further evaluated for ex-vivo permeation, in vivo pharmacokinetic and pharmacodynamics study. RESULTS: The optimized AG bilosomes (AG-BILopt) has shown the vesicle size 183.25 ± 2.43 nm, entrapment efficiency 81.67 ± 4.87%. TEM image showed a spherical shape vesicle with sharp boundaries. The drug release study revealed a significant enhancement in AG release (79.45 ± 4.18%) from AG-BILopt as compared to free AG-dispersion (25.47 ± 3.64%). The permeation and pharmacokinetic studies result revealed 4.49 times higher flux and 4.67 folds higher AUC0-t than free AG-dispersion. The antidiabetic activity results showed significant (P < 0.05) enhancement in therapeutic efficacy than free AG-dispersion. The results also showed marked improvement in biochemical parameters. CONCLUSION: Our findings suggested, the prepared apigenin loaded bilosomes was found to be an efficient delivery in the therapeutic efficacy in diabetes.

Solubility measurement, Hansen solubility parameters and solution thermodynamics of gemfibrozil in different pharmaceutically used solvents.

Gemfibrozil (GEM) is cholesterol-lowering agent which is being proposed as poorly water soluble drug (PWSD). Temperature based solubility values of GEM are not yet available in literature or any pharmacopoeia/monograph. Hence, the present studies were carried out to determine the solubility of PWSD GEM (as mole fraction) in various pharmaceutically used solvents such as water (H2O), methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), dimethyl sulfoxide (DMSO) and Transcutol® (THP) at the temperatures ranging from T = 298.2 K-318.2 K under atmospheric pressure P = 0.1 MPa. Equilibrium/experimental solubilities of GEM were recorded by applying a saturation shake flask methodology and regressed using 'van't Hoff and Apelblat models'. Hansen solubility parameters for GEM and various pharmaceutically used solvents were estimated using HSPiP software. The solid states of GEM (both in pure and equilibrated states) were studied by 'Differential Scanning Calorimetry' which confirmed no transformation of GEM after equilibrium. Experimental solubilities of GEM in mole fraction were observed maximum in THP (1.81 × 10-1) followed by DMSO, PEG-400, EA, 1-BuOH, 2-BuOH, IPA, EtOH, PG, MeOH, EG and H2O (3.24 × 10-6) at T = 318.2 K and similar tendencies were also recorded at T = 298.2 K, T = 303.2 K, T = 308.2 K and T = 313.2 K. 'Apparent thermodynamic analysis' on experimental solubilities furnished 'endothermic and entropy-driven dissolution' of GEM in each pharmaceutically used solvent.

Estimating the Solubility, Solution Thermodynamics, and Molecular Interaction of Aliskiren Hemifumarate in Alkylimidazolium Based Ionic Liquids.

Estimating the solubility and solution thermodynamics parameters of aliskiren hemifumarate (AHF) in three different room temperature ionic liquids (RTILs), Transcutol-HP (THP) and water are interesting as there is no solubility data available in the literature. In the current study, the solubility and solution thermodynamics of AHF in three different RTILs, THP and water at the temperature range from 298.2 to 318.2 K under air pressure 0.1 MP were evaluated. The solid phase evaluation by Differential Scanning Calorimetry (DSC) and Powder X-ray Diffraction (PXRD) indicated no conversion of AHF into polymorph. The mole fraction solubility of AHF was found to be highest in 1-hexyl-3-methylimidazolium hexafluorophosphate (HMMHFP) ionic liquid (7.46 × 10-2) at 318.2 K. The obtained solubility values of AHF was regressed by the Apelblat and van't Hoff models with overall root mean square deviations (RMSD) of 0.62% and 1.42%, respectively. The ideal solubility of AHF was higher compared to experimental solubility values at different temperatures. The lowest activity coefficient was found in HMMHFP, which confirmed highest molecular interaction between AHF-HMMHFP. The estimated thermodynamic parameters confirmed endothermic and entropy driven dissolution of AHF in different RTILs, THP, and water.

Pharmacokinetics of Orally Administered Poly(Ethylene Oxide)-block-Poly(ε-Caprolactone) Micelles of Cyclosporine A in Rats: Comparison with Neoral®.

PURPOSE: The aim of this study was to assess the pharmacokinetics of methoxy poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) micellar formulation of cyclosporine A (CyA) following oral administration in rats making comparisons with its commercial microemulsion formulation, Neoral®. METHODS: PEO-b-PCL copolymer was synthesized and used to form micelles encapsulating CyA. The release of CyA from Neoral® and PEO-b-PCL as well as PEO-b-PCL degradation were assessed in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). Polymeric micellar CyA and Neoral® were administered by oral gavage to healthy Wistar rats. At predetermined intervals, rats (n=5 for each time point) were euthanized, samples of blood and plasma were collected and analyzed for CyA using an LC-MS/MS assay. Blood and plasma pharmacokinetic parameters of CyA in its polymeric micellar formulation were compared to those of Neoral®. RESULTS: Polymeric micelles of CyA showed < 15 and 10% increase in diameter in SGF and SIF, respectively, within 24 h. PEO-b-PCL showed signs of minimal degradation when incubated for > 8 h in SGF, but was stable in SIF. Drug release in both SGF and SIF was comparable between the two formulations except for significantly higher release of CyA in SIF only at 24 h time point from Neoral®. Following oral administration (10 mg/kg), the blood AUC0-∞ and tmax of CyA in the polymeric micellar formulation was comparable to that for Neoral®. However, the Cmax of CyA-loaded PEO-b-PCL micelles was significantly (p < 0.05) higher than that obtained with Neoral® (2.10 ± 0.41 versus 1.40 ± 0.25 µg/mL, respectively). CyA had higher blood-to-plasma concentration ratios in polymeric micelles compared to Neoral®, in vivo. CONCLUSION: Our results show that PEO-b-PCL micelles can serve as stable and good solubilizing carriers for oral delivery of CyA providing similar pharmacokinetic profile to that of Neoral®.

Nanosuspension-Based Aloe vera Gel of Silver Sulfadiazine with Improved Wound Healing Activity.

The present study focuses on the development and characterization of nanosuspension of a poorly soluble drug, silver sulfadiazine (SSD) incorporated in Aloe vera gel (AV-gel) for improving its therapeutic efficacy. The SSD solution in ammonia was subjected to nanoprecipitation in surfactant solution and particle size was optimized by varying concentration of surfactant. Optimized formulation constituted of 5.5% (w/v) Span 20 and 5.5% (w/v) Tween 80 as a dispersing agent and 0.5% (w/v) Poloxamer 188 as a co-surfactant. The prepared nanosuspension was evaluated for particle size, polydispersity index, surface morphology, and x-ray diffraction study. The optimized nanosuspension was incorporated into nanogel formulation with the addition of 1% AV-gel and 0.5% Carbopol 940 for topical delivery of nanosized SSD. Evaluation of in vitro drug release exhibited a significant enhancement in release rate of the drug from developed nanogel formulation (77.16 ± 3.241%) in comparison to marketed formulation (42.81 ± 1.452%) after 48 h. In vivo histopathological studies in rats for 14 days of application of prepared nanogel showed improvement in the wound healing potential as compared to marketed formulation.

Development and characterization of methoxy poly(ethylene oxide)-block-poly(ε-caprolactone) (PEO-b-PCL) micelles as vehicles for the solubilization and delivery of tacrolimus.

Tacrolimus is a potent immunosuppressant; however, it suffers from several problems such as poor water solubility (4-12 µg/mL), low and variable oral bioavailability in patients, and narrow therapeutic window that could not be solved by the currently available i.v. formulation (Prograf®). Moreover, Prograf® contains HCO-60 (PEGylated castor oil) as a surfactant, which is reported to cause several side effects including hypersensitivity reactions. Therefore, the aim of the present study was to investigate the potential of PEO-b-PCL polymeric micelles as alternative vehicles for the solubilization and delivery of tacrolimus. Four PEO-b-PCL block copolymers, with different molecular weights of PCL, were synthesized by ring opening polymerization of ε-caprolactone using methoxy polyethylene oxide (5,000 g mol-1) as initiator and stannous octoate as catalyst. Synthesized copolymers were characterized for their average molecular weights and polydispersity index by 1H NMR and gel permeation chromatography (GPC), respectively. Drug-free micelles of PEO-b-PCL were prepared through a co-solvent evaporation method using acetone as the organic co-solvent. Tacrolimus-loaded micelles were prepared using the same method with different initial amounts of drug. Prepared micelles were characterized for their mean diameter size and polydispersity of the micellar population by dynamic light scattering, and an HPLC assay was used to determine the encapsulation efficiency of tacrolimus. The average molecular weights of the synthesized copolymers were in the range of 8,400-28,000 with narrow distributions (PDI = 1.06-1.11). The copolymers were designated according to the degree of polymerization of ε-caprolactone, namely PEO114-b-PCL30, PEO114-b-PCL60, PEO114-b-PCL120, and PEO114-b-PCL200. All the prepared micelles were having diameters sizes less than 100 nm with narrow distributions. The highest drug solubilization was achieved with PEO114-b-PCL120, where the aqueous solubility of tacrolimus exceeded 300 µg/mL. Our results show a potential for PEO-b-PCL micelles as solubilizing vehicles for the delivery of tacrolimus.

Toxicity evaluation of methoxy poly(ethylene oxide)-block-poly(ε-caprolactone) polymeric micelles following multiple oral and intraperitoneal administration to rats.

Methoxy poly(ethylene oxide)-block-poly(ɛ-caprolactone) (PEO-b-PCL) copolymers are amphiphilic and biodegradable copolymers designed to deliver a variety of drugs and diagnostic agents. The aim of this study was to synthesize PEO-b-PCL block copolymers and assess the toxic effects of drug-free PEO-b-PCL micelles after multiple-dose administrations via oral or intraperitoneal (ip) administration in rats. Assembly of block copolymers was achieved by co-solvent evaporation method. To investigate the toxicity profile of PEO-b-PCL micelles, sixty animals were divided into two major groups: The first group received PEO-b-PCL micelles (100 mg/kg) by oral gavage daily for seven days, while the other group received the same dose of micelles by ip injections daily for seven days. Twenty-four hours following the last dose, half of the animals from each group were sacrificed and blood and organs (lung, liver, kidneys, heart and spleen) were collected. Remaining animals were observed for further 14 days and was sacrificed at the end of the third week, and blood and organs were collected. None of the polymeric micelles administered caused any significant effects on relative organ weight, animal body weight, leucocytes count, % lymphocytes, liver and kidney toxicity markers and organs histology. Although the dose of copolymers used in this study is much higher than those used for drug delivery, it did not cause any significant toxic effects in rats. Histological examination of all the organs confirmed the nontoxic nature of the micelles.

Analysis of inorganic and organic constituents of myrrh resin by GC-MS and ICP-MS: An emphasis on medicinal assets.

The aim of the present investigation was to explore the constituents of the Arabian myrrh resin obtained from Commiphora myrrha. The organic and inorganic composition of the myrrh gum resin has been investigated using gas chromatography-mass spectrometry (GC-MS) and inductively coupled plasma-mass spectrometry (ICP-MS). Analysis executed by ICP-MS reveals the presence of various inorganic elements in significant amount in the myrrh resin. The elements that were found to be present in large amounts include calcium, magnesium, aluminum, phosphorus, chlorine, chromium, bromine and scandium. The important organic constituents identified in the myrrh ethanolic extract include limonene, curzerene, germacrene B, isocericenine, myrcenol, beta selinene, and spathulenol,. The present work complements other myrrh associated investigations done in the past and provides additional data for the future researches.

Effervescence Assisted Fusion Technique to Enhance the Solubility of Drugs.

The solubility of five poorly soluble drugs was enhanced by using an effervescence assisted solid dispersion (EASD) technique. EASDs were prepared by using modified fusion method. Drug and hydrophilic carrier were melted, and in this molten mixture, effervescence was generated by adding effervescence couple comprising organic acid (citric acid) and carbonic base (sodium bicarbonate). Solubility of drug powders, solid dispersions, and EASDs was determined at 25°C using shake flask method. Atorvastatin calcium, cefuroxime axetil, clotrimazole, ketoconazole, and metronidazole benzoate were estimated using a spectrophotometer at 246, 280, 260, 230, and 232 nm (λ max), respectively. Solubility of atorvastatin calcium (from 100 to 345 µg/ml), cefuroxime axetil (from 441 to 1948 µg/ml), clotrimazole (from 63 to 677 µg/ml), ketoconazole (from 16 to 500 µg/ml), and metronidazole benzoate (from 112 to 208 µg/ml) in EASDs was enhanced by 3.45-, 4.4-, 10.7-, 31.2-, and 1.8-fold, respectively. Scanning electron micrographs of drug powder, solid dispersion, and EASDs were compared. Scanning electron micrographs of EASDs showed a uniform distribution of drug particles in the carrier matrix. Morphology (size and shape) of cefuroxime axetil particles was altered in solid dispersion as well as in EASD. EASDs showed better solubility enhancement than conventional solid dispersions. The present technique is better suitable for drugs having a low melting point or melt without charring. Effervescence assisted fusion technique of preparing solid dispersions can be employed for enhancing solubility, dissolution, and bioavailability of poorly soluble drugs.

Metabolomic analysis of lung epithelial secretions in rats: an investigation of bronchoalveolar lavage fluid by GC-MS and FT-IR.

OBJECTIVE: Rat bronchoalveolar lavage fluid (BALF) metabolome can be used to obtain valuable, precise, and accurate information about underlying lung conditions in an experiment. The present study focuses on the evaluation of the lung epithelium metabolome in a rat model using techniques including bronchoalveolar lavage, gas chromatography-mass spectroscopy (GC-MS), and Fourier transform infrared spectroscopy (FT-IR). MATERIALS AND METHODS: Untargeted metabolites in BALF were extracted in ethyl acetate and derivatized by standard methods for the analysis by GC-MS. FT-IR spectra of ethyl acetate extract of BALF were obtained and read for the characteristic fingerprint of rats under investigation. Analyses were done in individual animals to obtain consistent data. BALF cells were counted by flow cytometry to monitor any inflammatory condition in rats. RESULTS: FT-IR analysis finds two peaks which are characteristically different from the extract medium, which is ethyl acetate. FT-IR peaks correspond to that of amino acids and carbohydrates, including ß-D-glucose, α-D-glucose, and ß-D-galactose. GC-MS evaluation of the BALF finds several products of the metabolism or its participants. Main compounds in the BALF detected by GC-MS include succinate, fumarate, glycine, alanine, 2-methyl-3-oxovaleric acid, dodecanoic acid, tetradecanoic acid, hexadecanoic acid, octanoic acid, trans-9-octadecanoic acid, octadecanoic acid, and Prostaglandin F1α. CONCLUSION: Several research reports reveal metabolomic parameters in murine model lung tissue or BALF, but they rarely reported a complete metabolomics model profile, particularly in rats. The present data of GC-MS and FT-IR suggest that the set up can be exploited to study metabolomic alterations in several lung conditions including acute lung toxicity, inflammation, asthma, bronchitis, fibrosis, and emphysema.

3D printed capsule shells for personalized dosing of cyclosporine-loaded SNEDDS.

Cyclosporine (CsA) is a potent immunosuppressant agent that has been used since 1980 for the treatment of various autoimmune diseases and is extensively used to enhance the survival rate of patients and grafts following organ transplant surgeries. CsA is a poorly soluble drug with a narrow therapeutic window and inter-subject variability, which can lead to graft rejection, nephrotoxicity and other severe adverse effects. This study explores a novel method that combines solubility enhancement of CsA using SNEDDS formulation and personalized dosage delivery using 3D printing technology. The oil phase was chosen as a combination of caproyl 90 and octanoic acid while the Smix phase was chosen as a combination of cremophore El and PEG 400. The optimized liquid SNEDDS was solidified using PEG 6000. An FDM printer was used to print a capsular shell with an oval base that ascends to form a dome with an opening at the top. This opening is used to fill the molten CsA-loaded SNEDDS formulation using a pipette or syringe. The CsA-loaded SNEDDS formulation was characterized by FTIR, DSC and SEM/EDX. The in-vitro release of CsA showed complete release within sixty minutes and followed Korsmeyer-Peppas release kinetics. The drug release was not affected by either the shell opening size or the amount of the loaded formulation. This novel method is simple and straightforward for personalized dosage delivery of drug-loaded SNEDDS formulations.

Preparation, optimization, and characterization of genistein-ginseng long-acting polymeric gel as a breast cancer treatment alternative.

To address the prevalent genistein (GST) metabolism and inadequate intestinal absorption, an oral long-acting and gastric in-situ gelling gel was designed to encapsulate and localize the intestinal release of the loaded genistein-ginseng (GST-GNS) solid dispersion. Because of the high breast perfusion of GST upon oral absorption, the GST-GNS solid dispersion was developed to enhance GST's dissolution and penetration while offering a synergistic impact against breast cancer (BC). Physiochemical analysis of the GST-GNS solid dispersion, release analysis, gel characterizations, storage stability, penetration, and in vitro cytotoxicity studies were carried out. GST-GNS solid dispersion showed improved dissolution and penetration as compared to raw GST. GST-GNS solid dispersion homogenous shape particles and hydrophilic contacts were revealed by scanning electron microscopy and Fourier Transform-Infrared analysis, respectively. GST-GNS solid dispersion's diffractogram shows the amorphous character. A second modification involved creating a gastric in-situ gelling system loaded with GST-GNS solid dispersion. This system demonstrated improved GST penetration employing the solid dispersion, as well as the localizing of the GST release at the intestinal media and antitumor synergism against BC. For a better therapeutic approach for BC, the innovative oral GST long-acting gel encasing the GST-GNS solid dispersion would be recommended.

Critical attributes of fine excipient materials in carrier-based dry powder inhalation formulations: The particle shape and surface properties.

The potential of fine excipient materials to improve the aerodynamic performance of carrier-based dry powder inhalation (DPI) formulations is well acknowledged but not fully elucidated. To improve the understanding of this potential, we studied two fine excipient materials: micronized lactose particles and silica microspheres. Inhalation formulations, each composed of a coarse lactose carrier, one of the two fine excipient materials (0.0-15.0 % w/w), and a spray-dried drug (fluticasone propionate) material (1.5 % w/w) were prepared. The physical structure, the flow behavior, the aerosolization behavior, and the aerodynamic performance of the formulations were studied. The two fine excipient materials similarly occupied carrier surface macropores. However, only the micronized lactose particles formed agglomerates and appeared to increase the tensile strength of the formulations. At 2.5 % w/w, the two fine excipient materials similarly improved drug dispersibility, whereas at higher concentrations, the micronized lactose material was more beneficial than the silica microspheres. The findings suggest that fine excipient materials improve drug dispersibility from carrier-based DPI formulations at low concentrations by filling carrier surface macropores and at high concentrations by forming agglomerates and/or enforcing fluidization. The study emphasizes critical attributes of fine excipient materials in carrier-based DPI formulations.

Fine excipient materials in carrier-based dry powder inhalation formulations: The interplay of particle size and concentration effects.

The contributions of fine excipient materials to drug dispersibility from carrier-based dry powder inhalation (DPI) formulations are well recognized, although they are not completely understood. To improve the understanding of these contributions, we investigated the influences of the particle size of the fine excipient materials on characteristics of carrier-based DPI formulations. We studied two particle size grades of silica microspheres, with volume median diameters of 3.31 µm and 8.14 µm, as fine excipient materials. Inhalation formulations, each composed of a lactose carrier material, one of the fine excipient materials (2.5% or 15.0% w/w), and a drug (fluticasone propionate) material (1.5% w/w) were prepared. The physical microstructure, the rheological properties, the aerosolization pattern, and the aerodynamic performance of the formulations were studied. At low concentration, the large silica microspheres had a more beneficial influence on the drug dispersibility than the small silica microspheres. At high concentration, only the small silica microspheres had a beneficial influence on the drug dispersibility. The results reveal influences of fine excipient materials on mixing mechanics. At low concentration, the fine particles improved deaggregation and distribution of the drug particles over the surfaces of the carrier particles. The large silica microspheres were associated with a greater mixing energy and a greater improvement in the drug dispersibility than the small silica microspheres. At high concentration, the large silica microspheres kneaded the drug particles onto the surfaces of the carrier particles and thus impaired the drug dispersibility. As a critical attribute of fine excipient materials in carrier-based dry powder inhalation formulations, the particle size demands robust specification setting.