Role of Emerin in regulating fibroblast differentiation and migration at the substrate of stiffness coupled topology.

In hypertrophic scars, the differentiation and migration of fibroblasts are influenced by the extracellular matrix microenvironment, which includes factors such as stiffness, restraint, and tensile force. These mechanical stresses incite alterations in cell behavior, accompanied by cytoskeletal protein reorganization. However, the role of nucleo-skeletal proteins in this context remains underexplored. In this study, we use a polyacrylamide hydrogel (PAA) to simulate the mechanical stress experienced by cells in scar tissue and investigate the impact of Emerin on cell behavior. We utilize atomic force microscopy (AFM) and RNA interference technology to analyze cell differentiation, migration, and stiffness. Our findings reveal that rigid substrates and cellular restriction elevate Emerin expression and diminish differentiation. Conversely, reducing Emerin expression leads to attenuated cell differentiation, where stiffness and constraining factors exert no notable influence. Furthermore, a softening of cells and an enhanced migration rate are also markedly observed. These observations indicate that variations in nuclear skeletal proteins, prompted by diverse matrix microenvironments, play a pivotal role in the pathogenesis of hypertrophic scars (HSs). This research offers novel insights and a reference point for understanding scar fibrosis formation mechanisms and preventing fibrosis.

MIR-107/HMGB1/FGF-2 axis responds to excessive mechanical stretch to promote rapid repair of vascular endothelial cells.

The increase of vascular wall tension can lead to endothelial injury during hypertension, but its potential mechanism remains to be studied. Our results of previous study showed that HUVECs could induce changes in HMGB1/RAGE to resist abnormal mechanical environments in pathological mechanical stretching. In this study, we applied two different kinds of mechanical tension to endothelial cells using the in vitro mechanical loading system FlexCell-5000T and focused on exploring the expression of miR-107 related pathways in HUVECs with excessive mechanical tension. The results showed that miR-107 negatively regulated the expression of the HMGB1/RAGE axis under excessive mechanical tension. Excessive mechanical stretching reduced the expression of miR-107 in HUVECs, and increased the expression of the HMGB1/RAGE axis. When miR-107 analog was transfected into HUVECs with lipo3000 reagent, the overexpression of miR-107 slowed down the increase of the HMGB1/RAGE axis caused by excessive mechanical stretching. At the same time, the overexpression of miR-107 inhibited the proliferation and migration of HUVECs to a certain extent. On the contrary, when miR-107 was silent, the proliferation and migration of HUVECs showed an upward trend. In addition, the study also showed that under excessive mechanical tension, miR-107 could regulate the expression of FGF-2 by HMGB1. In conclusion, these findings suggest that pathological mechanical stretching promote resistance to abnormal mechanical stimulation on HUVECs through miR-107/HMGB1/RAGE/FGF-2 pathway, thus promote vascular repair after endothelial injury. The suggest that miR-107 is a potential therapeutic target for hypertension.

HMGB1/RAGE axis accelerates the repair of HUVECs injured by pathological mechanical stretching via promoting bFGF expression.

AIM: During hypertension-induced endothelial dysfunction, periodic mechanical stretching (MS) activates related inflammatory pathways and leads to endothelial damage, but the underlying mechanisms remain unknown. The present study aimed to determine the injury of HUVECs caused by overstretching and the role of HMGB1-RAGE pathway in HUVECs after injury. MAIN METHODS AND KEY FINDINGS: Human umbilical vein endothelial cells (HUVECs) were cultured and seeded in BioFlex™ plates (six wells). Cells were exposed to 5% (physiological state) and 20% (pathological state) mechanical stretch at 1 Hz for 12 or 24 h in a Flexcell-5000™, with unstretched cells serving as controls. It was found that excessive MS can inhibit cell viability, proliferation, and tube-forming ability resulting in disordered cell arrangement and orientation, slowing cell migration. All these changes cause endothelial damage compared to physiological MS. Endothelial cells (ECs) promote cell migration and self-repair after injury by increasing the High-mobility group box 1 (HMGB1) expression. Experiments and protein prediction networks have shown that HMGB1 can also promote the expression of downstream protein bFGF by binding to receptor for advanced glycation end products (RAGE). Interestingly, VEGF protein expression did not change significantly during this repair process, implying that bFGF replaces the role of VEGF in vascular endothelial repair. SIGNIFICANCE: The present study demonstrates that in the context of endothelial injury caused by excessive MS, the HMGB1/RAGE/bFGF pathway is activated and promotes endothelial repair after injury. Therefore, understanding these mechanisms will help find new therapies for diseases such as hypertension, atherosclerosis, and aneurysm formation.

Human Vascular Endothelial Cells Promote the Secretion of Vascularization Factors and Migration of Human Skin Fibroblasts under Co-Culture and Its Preliminary Application.

The good treatment of skin defects has always been a challenge in the medical field, and the emergence of tissue engineering skin provides a new idea for the treatment of injured skin. However, due to the single seed cells, the tissue engineering skin has the problem of slow vascularization at the premonitory site after implantation into the human body. Cell co-culture technology can better simulate the survival and communication environment of cells in the human body. The study of multicellular co-culture hopes to bring a solution to the problem of tissue engineering. In this paper, human skin fibroblasts (HSFs) and human vascular endothelial cells (HVECs) were co-cultured in Transwell. The Cell Counting Kit 8 (CCK8), Transwell migration chamber, immunofluorescence, Western blot (WB), and real time quantitative PCR (RT-qPCR) were used to study the effects of HVECs on cell activity, migration factor (high mobility group protein 1, HMGB1) and vascularization factor (vascular endothelial growth factor A, VEGFA and fibroblast growth factor 2, FGF2) secretion of HSFs after co-cultured with HVECs in the Transwell. The biological behavior of HSFs co-cultured with HVECs was studied. The experimental results are as follows: (1) The results of cck8 showed that HVECS could promote the activity of HSFs. (2) HVECs could significantly promote the migration of HSFs and promote the secretion of HMGB1. (3) HVECs could promote the secretion of VEGFA and FGF2 of HSFs. (4) The HVECs and HSFs were inoculated on tissue engineering scaffolds at the ratio of 1:4 and were co-cultured and detected for 7 days. The results showed that from the third day, the number of HSFs was significantly higher than that of the control group without HVECs.

Study on Long-Term Tracing of Fibroblasts on Three-Dimensional Tissue Engineering Scaffolds Based on Graphene Quantum Dots.

In order to find a convenient and stable way to trace human skin fibroblasts (HSFs) in three-dimensional tissue engineering scaffolds for a long time, in this experiment, Graphene Oxide Quantum Dots (GOQDs), Amino Graphene Quantum Dots (AGQDs) and Carboxyl Graphene Quantum Dots (CGQDs) were used as the material source for labeling HSFs. Exploring the possibility of using it as a long-term tracer of HSFs in three-dimensional tissue engineering scaffolds, the contents of the experiment are as follows: the HSFs were cultured in a cell-culture medium composed of three kinds of Graphene Quantum Dots for 24 h, respectively; (1) using Cell Counting Kit 8 (CCK8), Transwell migration chamber and Phalloidin-iFlior 488 to detect the effect of Graphene Quantum Dots on the biocompatibility of HSFs; (2) using a living cell workstation to detect the fluorescence labeling results of three kinds of Graphene Quantum Dots on HSFs, and testing the fluorescence attenuation of HSFs for 7 days; (3) the HSFs labeled with Graphene Quantum Dots were inoculated on the three-dimensional chitosan demethylcellulose sodium scaffold, and the living cell workstation was used to detect the spatial distribution of the HSFs on the three-dimensional scaffold through the fluorescence properties of the HSFs.. Experimental results: (1) the results of CCK8, Transwell migration, and FITC-Phalloidin cytoskeleton test showed that the three kinds of Graphene Quantum Dots had no effect on the biological properties of HSFs (p < 0.05); (2) the results of the fluorescence labeling experiment showed that only AGQDs could make HSFs fluorescent, and cells showed orange−red fluorescence; (3) the results of long-range tracing of HSFs which were labeled by with AGQDs showed that the fluorescence life of the HSFs were as long as 7 days; (4) The spatial distribution of HSFs can be detected on the three-dimensional scaffold based on their fluorescence properties, and the detection time can be up to 7 days.

[Effects of two common acellular methods on the physicochemical properties of dermal acellular matrix].

At present, acellular matrix is an effective replacement material for the treatment of skin damage, but there are few systematic evaluation studies on its performance. The experimental group of this study used two decellularization methods to prepare the matrix: one was the acellular matrix which sterilized with peracetic acid first (0.2% PAA/4% ethanol solution) and then treated with hypertonic saline (group A), the other was 0.05% trypsin/EDTA decellularization after γ irradiation (group B); and the control group was soaked in PBS (Group C). Then physical properties and chemical composition of the three groups were detected. Hematoxylin eosin (HE) staining showed that the acellular effect of group B was good. The porosity of group A and B were both above 84.9%. In group A, the compressive modulus of elasticity was (9.94 ± 3.81) MPa, and the compressive modulus of elasticity was (12.59 ± 5.50) MPa in group B. There was no significant difference between group A or B and group C. The total content of collagen in acellular matrix of group A and B was significantly lower than that of group C (1. 662 ± 0.229) mg/g, but there was no significant difference in the ratio of collagen Ⅰ/Ⅲ between group B and group C. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that there was no significant difference in microstructure. Qualitative detection of fibronectin and elastin in each group was basically consistent with that in group C. Therefore, acellular matrix of group B had better performance as scaffold material. The experimental results show that the acellular matrix prepared by γ-ray sterilization and decellularization of 0.05% Trypsin enzyme/EDTA could be used for the construction of tissue-engineered skin. It could also provide reference for the preparation and mounting of heterogeneous dermal acellular matrix. It was also could be used for electrostatic spinning or three-dimensional printed tissue engineered skin scaffold which could provide physical and chemical parameters for it.

Aligned electrospun fibers of different diameters for improving cell migration capacity.

Electrospun fibers have gained significant attention as scaffolds in skin tissue engineering due to their biomimetic properties, which resemble the fibrous extracellular matrix. The morphological characteristics of electrospun fibers play a crucial role in determining cell behavior. However, the effects of electrospun fibers' arrangement and diameters on human skin fibroblasts (HSFs) remain elusive. Here, we revealed the impact of electrospun fiber diameters (700 nm, 2000 nm, and 3000 nm) on HSFs' proliferation, migration, and functional expression. The results demonstrated that all fibers exhibited good cytocompatibility. HSFs cultured on nanofibers (700 nm diameter) displayed a more dispersed and elongated morphology. Conversely, fibers with a diameter of 3000 nm exhibited a reduced specific surface area and lower adsorption of adhesion proteins, resulting in enhanced cell migration speed and effective migration rate. Meanwhile, the expression levels of migration-related genes and proteins were upregulated at 48 h for the 3000 nm fibers. This study demonstrated the unique role of fiber diameters in controlling the physiological functions of cells, especially decision-making and navigating migration in complex microenvironments of aligned electrospun fibers, and highlights the utility of these bioactive substitutes in skin tissue engineering applications.

Frontiers in the Etiology and Treatment of Preterm Premature Rupture of Membrane: From Molecular Mechanisms to Innovative Therapeutic Strategies.

Preterm premature rupture of membranes (pPROM) poses a significant threat to fetal viability and increases the risk for newborn morbidities. The perinatal period of preterm infants affected by pPROM is often characterized by higher rates of mortality and morbidity, with associated risks of cerebral palsy, developmental delays, compromised immune function, respiratory diseases, and sensory impairments. pPROM is believed to result from a variety of causes, including but not limited to microbially induced infections, stretching of fetal membranes, oxidative stress, inflammatory responses, and age-related changes in the fetal-placental interface. Maternal stress, nutritional deficiencies, and medically induced procedures such as fetoscopy are also considered potential contributing factors to pPROM. This comprehensive review explores the potential etiologies leading to pPROM, delves into the intricate molecular mechanisms through which these etiologies cause membrane ruptures, and provides a concise overview of diagnostic and treatment approaches for pPROM. Based on available therapeutic options, this review proposes and explores the possibilities of utilizing a novel composite hydrogel composed of amniotic membrane particles for repairing ruptured fetal membranes, thereby holding promise for its clinical application.

A dynamically cross-linked catechol-grafted chitosan/gelatin hydrogel dressing synergised with photothermal therapy and baicalin reduces wound infection and accelerates wound healing.

Superior multifunctional hydrogel dressings are of considerable interest in wound healing. In clinical practice, it is useful to investigate hydrogel dressings that offer multifunctional benefits to expedite the process of wound healing. In this study, Catechol-grafted Chitosan, Gelatin, and Fe3+ as substrates to construct a hydrogel network. The network was dynamically cross-linked to form Ccg@Fe hydrogel substrate. Fe3O4 nanoparticles and baicalin, which possess antimicrobial and anti-inflammatory properties, were loaded onto the substrate to form a photothermal antibacterial composite hydrogel dressing (Ccg@Fe/Bai@Fe3O4 NPs). The Ccg@Fe hydrogel was characterised using Fourier transform infrared spectroscopy (FTIR) and Ultraviolet-visible spectrophotometry (UV-Vis). The morphological, mechanical, and adhesion properties of the hydrogel were determined using scanning electron microscopy (SEM) and a universal testing machine. The hydrogel's swelling, hemostasis, and self-healing properties were also evaluated. Additionally, the study determined the release rate of hydrogel-loaded antimicrobial and anti-inflammatory Baicalin (Ccg@Fe/Bai) and evaluated the photothermal antimicrobial properties of hydrogel-loaded Fe3O4 nanoparticles (Ccg@Fe/Bai@Fe3O4 NPs) through synergistic photothermal therapy (PTT). Histological staining of mice skin wound tissues using Masson and H&E revealed that the Ccg@Fe/Bai@Fe3O4 NPs hydrogel dressing demonstrated potential healing ability with the aid of PTT. The study suggests that this multifunctional hydrogel dressing has great potential for wound healing.

Advances in injectable hydrogels for radiation-induced heart disease.

Radiological heart damage (RIHD) is damage caused by unavoidable irradiation of the heart during chest radiotherapy, with a long latency period and a progressively increasing proportion of delayed cardiac damage due to conventional doses of chest radiotherapy. There is a risk of inducing diseases such as acute/chronic pericarditis, myocarditis, delayed myocardial fibrosis and damage to the cardiac conduction system in humans, which can lead to myocardial infarction or even death in severe cases. This paper details the pathogenesis of RIHD and gives potential targets for treatment at the molecular and cellular level, avoiding the drawbacks of high invasiveness and immune rejection due to drug therapy, medical device implantation and heart transplantation. Injectable hydrogel therapy has emerged as a minimally invasive tissue engineering therapy to provide necessary mechanical support to the infarcted myocardium and to act as a carrier for various bioactive factors and cells to improve the cellular microenvironment in the infarcted area and induce myocardial tissue regeneration. Therefore, this paper combines bioactive factors and cellular therapeutic mechanisms with injectable hydrogels, presents recent advances in the treatment of cardiac injury after RIHD with different injectable gels, and summarizes the therapeutic potential of various types of injectable hydrogels as a potential solution.

A multifunctional nano-hydroxyapatite/MXene scaffold for the photothermal/dynamic treatment of bone tumours and simultaneous tissue regeneration.

After resection of bone tumour, the risk of cancer recurrence and numerous bone defects continues to threaten the health of patients. To overcome the challenge, we developed a novel multifunctional scaffold material consisting mainly of nano-hydroxyapatite particles (n-HA), MXene nanosheets and g-C3N4 to prevent tumour recurrence and promote bone formation. N-HA has the potential to restrict the growth of osteosarcoma cells, and the combination of MXene and g-C3N4 enables the scaffolds to produce photodynamic and photothermal effects simultaneously under near infrared (NIR) irradiation. Surprisingly, n-HA can further enhance the synergistic anti-tumour function of photodynamic and photothermal, and the scaffolds can eradicate osteosarcoma cells in only 10 min at a mild temperature of 45 ℃. Moreover, the scaffold exhibit exceptional cytocompatibility and possesses the capacity to induce osteogenic differentiation of bone marrow mesenchymal stem cells. Therefore, this multifunctional scaffold can not only inhibits the proliferation of bone tumour cells and rapidly eradicate bone tumour through NIR irradiation, but also enhances osteogenic activity. This promising measure can be used to treat tissue damage after bone tumour resection.

The enhanced visible light driven photocatalytic activity of zinc porphyrin/g-C3N4 nanosheet for efficient bacterial infected wound healing.

Graphitic carbon nitride (g-C3N4) has received much attention as a metal-free polymeric two-dimensional photocatalyst for antibiotic-free antibacterial application. However, the weak photocatalytic antibacterial activity of pure g-C3N4 stimulated by visible light limits its applications. Herein, g-C3N4 is modified with Zinc (II) meso-tetrakis (4-carboxyphenyl) porphyrin (ZnTCPP) by amidation reaction to enhance the utilization of visible light and reduce the recombination of electron-hole pairs. The composite (ZP/CN) is used to treat bacterial infection under visible light irradiation with a high efficacy of 99.99% within 10 min due to the enhanced photocatalytic activity. Ultraviolet photoelectron spectroscopy and density flooding theory calculations indicate the excellent electrical conductivity between the interface of ZnTCPP and g-C3N4. The formed built-in electric field is responsible for the high visible photocatalytic performance of ZP/CN. In vitro and in vivo tests have demonstrated that ZP/CN not only possesses excellent antibacterial activity upon visible light irradiation, but also facilitates the angiogenesis. In addition, ZP/CN also suppresses the inflammatory response. Therefore, this inorganic-organic material can serve as a promising platform for effective healing of bacteria-infected wounds.

Preparation of polyvinyl alcohol/chitosan nanofibrous films incorporating graphene oxide and lanthanum chloride by electrospinning method for potential photothermal and chemical synergistic antibacterial applications in wound dressings.

Electrospun fibres have been widely used as skin dressings due to their unique structur. However, due to the lack of intrinsic antimicrobial activity, it is easy for the wound to become infected. Bacterial infection, which leads to chronic inflammation, severely hinders the normal process of skin regeneration. In this study, a polyvinyl alcohol/chitosan (PVA/CS) composite films with chemical sterilization and near-infrared (NIR) photothermal antibacterial activity was fabricated by electrospinning. Graphene oxide (GO), a photosensitiser, was incorporated into the films, and lanthanum chloride (Lacl3) as a chemical antibacterial agent was also doped in the electrospun films. The structure, morphology, mechanical properties, wettability, and antimicrobial and photothermal antibacterial activity of the PVA/CS-based fibre films were investigated. The results showed that the addition of Lacl3 to the PVA/CS/GO nanofibres (PVA/CS/GO-La) improved the hydrophilicity, tensile strength and resistance to elastic deformation of the nanofibres. The PVA/CS/GO-La12.5 mM sample exhibited the best antibacterial performance, showing high inhibition against Staphylococcus aureus (82% antibacterial efficacy) and Escherichia coli (99.7% antibacterial efficacy). Furthermore, the antibacterial efficacy of the films surface was further enhanced after exposure to NIR light (808 nm, 0.01 W) for 20 min. In addition, the nanofibre films showed no cytotoxicity against human skin fibroblasts (HSFs), indicating its potential application in the field of broad-spectrum antibacterial materials.

Vinculin motion modes analysis with elastic network model.

Vinculin is an important protein for the linkage between adhesion molecules and the actin cytoskeleton. The activation mechanism of vinculin is still controversial. In order to provide useful information for a better understanding of its activation, we analyze the motion mode of vinculin with elastic network model in this work. The results show that, to some extent, the five domains will present structural rigidity in the motion process. The differences between the structure fluctuations of these domains are significant. When vinculin interacted with other partners, the central long alpha-helix of the first domain becomes bent. This bending deformation can weaken the interaction between the first domain and the tail domain. This motion mode of the first domain is in good agreement with the information extracted from some realistic complex structures. With the aid of the anisotropy elastic network mode, we analyze the motion directions of these domains. The fourth domain has a rotational motion. This rotation is favorable for the releasing of the tail domain from the pincer-like clamp, which is formed by the first and the third domain. All these motion modes are an inherent feature of the structure, and these modes mainly depend on the topology character of the structure.

Casein micelles embedded composite organohydrogel as potential wound dressing.

Excellent mechanical and tissue adhesive properties, long-lasting environmental suitability and reliable biocompatibility are essential factors for the hydrogels to be applied as wound dressing in the clinical fields. Based on the self-assembly micelle structures, a new type of casein micelles (CEs)/polyvinyl alcohol (PVA) GW (glycerol-water) organohydrogel was designed and synthesized by a simple one-pot method. Through a unique "load sharing" effect, the CEs which own suitable adhesion abilities and drug loading capacities simultaneously were embedded into the PVA networks by rich hydrogen bonds, so that to obtain the composite organ hydrogel with not only excellent adhesive abilities, but also enhanced mechanical properties. Benefited from the unique GW binary solvent system, the organohydrogel showed long-lasting moisture lock-in capacity and extreme temperature tolerance (in the range of --20 °C ~ 60 °C). Particularly, after loading the model antibacterial drugs (allicin) within the CEs, the as-developed CEs/PVA GW gel exhibited a prominent long-lasting (>100 h) antibacterial properties (>90%). Furthermore, the organohydrogel was confirmed with prominent biocompatibility to support fibroblast cell proliferation and migration. This work proposed a new strategy to build CEs-based gel system, which have a great potential application in terms of prevent bacterial infection, accelerate tissue proliferation and wound healing.

Analysis on synergistic cocontraction of extrinsic finger flexors and extensors during flexion movements: A finite element digital human hand model.

Fine hand movements require the synergistic contraction of intrinsic and extrinsic muscles to achieve them. In this paper, a Finite Element Digital Human Hand Model (FE-DHHM) containing solid tendons and ligaments and driven by the Muscle-Tendon Junction (MTJ) displacements of FDS, FDP and ED measured by ultrasound imaging was developed. The synergistic contraction of these muscles during the finger flexion movements was analyzed by simulating five sets of finger flexion movements. The results showed that the FDS and FDP contracted together to provide power during the flexion movements, while the ED acted as an antagonist. The peak stresses of the FDS, FDP and ED were all at the joints. In the flexion without resistance, the FDS provided the main driving force, and the FDS and FDP alternated in a "plateau" of muscle force. In the flexion with resistance, the muscle forces of FDS, FDP, and ED were all positively correlated with fingertip forces. The FDS still provided the main driving force, but the stress maxima occurred in the FDP at the DIP joint.

Synthesis and Characterization of PU/PLCL/CMCS Electrospun Scaffolds for Skin Tissue Engineering.

As tissue regeneration material, electrospun fibers can mimic the microscale and nanoscale structure of the natural extracellular matrix (ECM), which provides a basis for cell growth and achieves organic integration with surrounding tissues. At present, the challenge for researchers is to develop a bionic scaffold for the regeneration of the wound area. In this paper, polyurethane (PU) is a working basis for the subsequent construction of tissue-engineered skin. poly(L-lactide-co-caprolactone) (PLCL)/carboxymethyl chitosan (CMCS) composite fibers were prepared via electrospinning and cross-linked by glutaraldehyde. The effect of CMCS content on the surface morphology, mechanical properties, hydrophilicity, swelling degree, and cytocompatibility were explored, aiming to assess the possibility of composite scaffolds for tissue engineering applications. The results showed that randomly arranged electrospun fibers presented a smooth surface. All scaffolds exhibited sufficient tensile strength (5.30-5.60 MPa), Young's modulus (2.62-4.29 MPa), and swelling degree for wound treatment. The addition of CMCS improved the hydrophilicity and cytocompatibility of the scaffolds.

Serum Homocysteine Level Predictive Capability for Severity of Restenosis Post Percutaneous Coronary Intervention.

Background: In stent restenosis (ISR) is one of the major complications after stent implantation. Thus, there is a growing interest in identifying a biomarker for the onset of ISR. High levels of serum homocysteine (Hcy) have been associated with the progression of cardiovascular disease. Therefore, the study was carried out to quantify the correlation between serum Hcy and ISR severity. Compared with coronary angiography (CAG), Hcy levels provided a significantly better clinical detection of ISR severity after PCI. Methods: A total of 155 patients were recruited from Shanxi Bethune hospital, from 6 months to 2 years post PCI. Serum Hcy levels and postoperative angiography results were used to differentiate the patients into two experimental groups: ISR (>50% diametrical stenosis), and non-ISR. The non-ISR included two subgroups: intimal hyperplasia (10-50% diametrical stenosis), and recovery (<10% diametrical stenosis). In addition, a group of 80 healthy individuals was used as a negative control. The correlation between homocysteine level and ISR severity t was analyzed for all groups. In addition, the correlation between serum Hcy level and the severity of ISR in the experimental group was analyzed by the Pearson correlation test. Results: The serum Hcy level in the experimental group and control group was determined to be (20.21 ± 11.42) µmol/L and (15.11 ± 10.25) µmol/L respectively. The level of serum Hcy in the experimental group was significantly higher than in the control group (t-value of 2.385; p-value of 0.019). The serum Hcy level in the restenosis and the intimal hyperplasia group was (25.72 ± 13.71) µmol/L and (17.35 ± 7.70) µmol/L respectively. The serum Hcy level in the restenosis group was significantly higher than in the intimal hyperplasia group (t-value of 2.215; p-value of 0.033). The level of serum Hcy in the group without a plaque in the stent was (16.30 ± 6.08) µmol/L, whereas in the control group was (15.11 ± 10.25) µmol/L. The no plaque group had a slightly higher serum Hcy level than the control group (t-value of 0.634; p-value of 0.528). All included patients were divided into four quartiles based on the serum Hcy concentration: quartile 1 (8.90-13.20 µmol/L), quartile 2 (13.30-16.45 µmol/L), quartile 3 (16.60-24.25 µmol/L) and quartile 4 (24.30-65.30 µ mol/L). The incidence of ISR was 5, 6.25, 7.5 and 15%, in the 1,2,3 and four quartiles respectively. The serum Hcy level in the experimental group was (20.21 ± 11.42) µmol/L, the severity of in-stent restenosis was (0.25 ± 0.31), (R-value was 0.234; p-value was 0.037), indicating a correlation between serum Hcy and the severity of restenosis (p < 0.05). Taking coronary angiography as the gold standard, a ROC curve analysis was performed on the serum Hcy levels for the experimental group. The area under the curve (AUC) was 0.718 (95% CI 0.585-0.854, p < 0.001), indicating that the serum Hcy concentration could predict ISR. On the ROC curve, the best critical value of serum Hcy concentration for predicting ISR was 20.05 µmol/L, with a sensitivity of 45% and specificity of 88.1%. Conclusion: A positive correlation was observed between homocysteine and the severity of restenosis after PCI, The level of Hcy could serve as a predictive biomarker for the severity of ISR.

Construction of a TiO2/MoSe2/CHI coating on dental implants for combating Streptococcus mutans infection.

Infection and inflammation are the main causes resulting in the failure of dental implants. In this work, molybdenum diselenide (MoSe2) was synthesized hydrothermally on the surface of porous TiO2 coating prepared by micro-arc oxidation on titanium (Ti) implants to render the coating excellent in situ antibacterial activity under the irradiation of near-infrared (NIR) light. Chitosan (CHI) was adsorbed on the surface of MoSe2 nanosheets by electrostatic bonding to improve the biocompatibility. The introduction of MoSe2 significantly improved the photothermal and photodynamic ability of TiO2 coating and made the implants possess excellent in vitro and in vivo antibacterial property against Streptococcus mutans (S. mutans) under the irradiation of 808 nm NIR light for 15 min because of the synergistic of hyperthermia and reactive oxygen species (ROS). The immobilization of CHI improved the hydrophilicity and biocompatibility of MoSe2, and the hybrid coating (TiO2/MoSe2/CHI) promoted osseointegration even in the presence of infection in vivo under 808 nm light irradiation. The light - assisted antibacterial coating described here has large clinical potential in dental implants applications.

3D Printing Polymer-based Bolus Used for Radiotherapy.

Bolus is a kind of auxiliary device used in radiotherapy for the treatment of superficial lesions such as skin cancer. It is commonly used to increase skin dose and overcome the skin-sparing effect. Despite the availability of various commercial boluses, there is currently no bolus that can form full contact with irregular surface of patients' skin, and incomplete contact would result in air gaps. The resulting air gaps can reduce the surface radiation dose, leading to a discrepancy between the delivered dose and planned dose. To avoid this limitation, the customized bolus processed by three-dimensional (3D) printing holds tremendous potential for making radiotherapy more efficient than ever before. This review mainly summarized the recent development of polymers used for processing bolus, 3D printing technologies suitable for polymers, and customization of 3D printing bolus. An ideal material for customizing bolus should not only have the feature of 3D printability for customization, but also possess radiotherapy adjuvant performance as well as other multiple compound properties, including tissue equivalence, biocompatibility, antibacterial activity, and antiphlogosis.