RESUMEN
Conductive polymers are recognized as ideal candidates for the development of noninvasive and wearable sensors for real-time monitoring of potassium ions (K+) in sweat to ensure the health of life. However, the low ion-to-electron transduction efficiency and limited active surface area hamper the development of high-performance sensors for low-concentration K+ detection in the sweat. Herein, a wearable K+ sensor is developed by tailoring the nanostructure of polypyrrole (PPy), serving as an ion-to-electron transduction layer, for accurately and stably tracing the K+ fluctuation in human sweat. The PPy nanostructures can be tailored from nanospheres to nanofibers by controlling the supramolecular assembly process during PPy polymerization. Resultantly, the ion-to-electron transduction efficiency (17-fold increase in conductivity) and active surface area (1.3-fold enhancement) are significantly enhanced, accompanied by minimized water layer formation. The optimal PPy nanofibers-based K+ sensor achieved a high sensitivity of 62 mV decade-1, good selectivity, and solid stability. After being integrated with a temperature sensor, the manufactured wearable sensor realized accurate monitoring of K+ fluctuation in the human sweat.
Asunto(s)
Nanofibras , Polímeros , Potasio , Pirroles , Dispositivos Electrónicos Vestibles , Nanofibras/química , Pirroles/química , Polímeros/química , Potasio/química , Potasio/análisis , Humanos , Técnicas Biosensibles/métodos , Electrones , Iones , Sudor/química , Conductividad EléctricaRESUMEN
Organic solvent nanofiltration (OSN) plays important roles in pharmaceutical ingredients purification and solvent recovery. However, the low organic solvent permeance under cross-flow operation of OSN membrane hampers their industrial applications. Herein, we report the construction of coffee-ring structured membrane featuring high OSN permeance. A water-insoluble crystal monomer that dissolved in EtOH/H2O mixed solvent was designed to react with trimesoyl chloride via interfacial polymerization. Owing to the diffusion of EtOH to n-hexane, coffee-ring nanostructure on the support membrane appeared, which served as the template for construction of coffee-ring structured membrane. The optimal nanostructured membrane demonstrated 2.6-fold enhancement in the effective surface area with reduced membrane thickness. Resultantly, the membrane afforded a 2.7-fold enhancement in organic solvent permeance, e.g., ~13â LMH/bar for MeOH, without sacrificing the rejection ability. Moreover, due to the rigid monomer structure, the fabricated membrane shows distinctive running stability in active pharmaceutical ingredients purification and the ability for concentration of medicines.
RESUMEN
Mixed-matrix membranes (MMMs) have the potential for energy-efficient gas separation by matching the superior mass transfer and anti-plasticization properties of the fillers with processability and scaling up features of the polymers. However, construction of high-performance MMMs has been prohibited due to low filler-loading and the existence of interfacial defects. Here, high MOF-loaded, i.e., 55â wt %, MMMs are developed by a 'dormancy and double-activation' (DDA) strategy. High MOF precursor concentration suppresses crystallization in the membrane casting solution, realizing molecular level mixing of all components. Then, the polymeric matrix was formed with uniform encapsulation of MOF nutrients. Subsequently, double-activation was employed to induce MOF crystallization: the alkali promotes MOFs nucleation to harvest small porous nanocrystals while excessive ligands activate the metal ions to enhance the MOFs conversion. As such, quasi-semi-continuous mass transfer channels can be formed in the MMMs by the connected MOFs nanocrystals to boost the gas permeability. The optimized MMM shows significantly ameliorated CO2 permeability, i.e., 2841 Barrer, five-fold enhancement compared with pristine polymer membrane, with a good CO2 /N2 selectivity of 36. Besides, the nanosized MOFs intensify their interaction with polymer chains, endowing the MMMs with good anti-plasticization behaviour and stability, which advances practical application of MMMs in carbon capture.
RESUMEN
Mixed matrix membranes (MMMs), conjugating the advantages of flexible processing-ability of polymers and high-speed mass transfer of porous fillers, are recognized as the next-generation high-performance CO2 capture membranes for solving the current global climate challenge. However, controlling the crystallization of porous metal-organic frameworks (MOFs) and thus the close stacking of MOF nanocrystals in the confined polymer matrix is still undoable, which thus cannot fully utilize the superior transport attribute of MOF channels. In this study, the "confined swelling coupled solvent-controlled crystallization" strategy is employed for well-tailoring the in-situ crystallization of MOF nanocrystals, realizing rapid (<5 min) construction of defect-free freeway channels for CO2 transportation in MMMs due to the close stacking of MOF nanocrystals. Consequently, the fabricated MMMs exhibit approximately fourfold enhancement in CO2 permeability, i.e., 2490 Barrer with a CO2 /N2 selectivity of 37, distinctive antiplasticization merit, as well as long-term running stability, which is at top-tier level, enabling the large-scale manufacture of high-performance MMMs for gas separation.
RESUMEN
With the increasing demands for novel flexible organic electronic devices, conductive polymers are now becoming the rising star for reaching such targets, which has witnessed significant breakthroughs in the fields of thermoelectric devices, solar cells, sensors, and hydrogels during the past decade due to their outstanding conductivity, solution-processing ability, as well as tailorability. However, the commercialization of those devices still lags markedly behind the corresponding research advances, arising from the not high enough performance and limited manufacturing techniques. The conductivity and micro/nano-structure of conductive polymer films are two critical factors for achieving high-performance microdevices. In this review, the state-of-the-art technologies for developing organic devices by using conductive polymers are comprehensively summarized, which will begin with a description of the commonly used synthesis methods and mechanisms for conductive polymers. Next, the current techniques for the fabrication of conductive polymer films will be proffered and discussed. Subsequently, approaches for tailoring the nanostructures and microstructures of conductive polymer films are summarized and discussed. Then, the applications of micro/nano-fabricated conductive films-based devices in various fields are given and the role of the micro/nano-structures on the device performances is highlighted. Finally, the perspectives on future directions in this exciting field are presented.
RESUMEN
Azeotropic organic solvent mixture separation is common in the chemical industry but extremely difficult. Zeolitic imidazolate framework-67 (ZIF-67) shows great potential in organic solvent mixture separation due to its rigid micropores and excellent stability. However, due to the fast nucleation rate, it is a great challenge to prepare continuous ZIF-67 membrane layers with ultrathin thickness. In this study, a hydroxy salt layer with high inducible activity was synthesized as a precursor on different porous substrates to prepare ZIF-67 membranes at room temperature. The precursor layer enables an intact ZIF-67 membrane with an ultrathin thickness of 176±12â nm. The experimental and simulation results confirmed that the size sieving through the pore windows and the preferential adsorption of polar solvent molecules provide the ZIF-67 membrane an unprecedented separation performance such as high separation factors and fluxes, for four types of azeotropic organic solvent mixtures.
RESUMEN
A thermoresponsive chitosan derivative was synthesized by reacting chitosan (CS) with butyl glycidyl ether (BGE) to break the inter- and intramolecular hydrogen bonds of the polymer. An aqueous solution of the thermoresponsive CS derivative exhibits a lower critical solution temperature (LCST) than CS, and it undergoes a phase transition separation when the temperature changes. Successful incorporation of BGE into the CS was confirmed by FTIR and XPS analyses. Varying the BGE content and the concentration of the aqueous solution produced different LCST ranges, as shown by transmittance vs temperature curves. The particle size was observed by scanning electron microscopy, which revealed that the particles were smaller and well dispersed at 15 °C, whereas the particles became larger and tended to aggregate at 60 °C. A similar trend was observed with the mean particle size measured using dynamic light scattering. Positron annihilation lifetime spectroscopy data also revealed the reversibility of the particle properties as a function of temperature. Microstructure analysis showed that the particles had larger free-volume sizes at 15 °C than at 60 °C. The particles were also found to be nontoxic with 92% cell survival. A simple forward osmosis (FO) test for dye dehydration revealed the potential use of the thermoresponsive chitosan derivative as a draw solute with a flux of 8.6 L/m2 h and rejection of 99.8%.
Asunto(s)
Quitosano/análogos & derivados , Ósmosis , Quitosano/química , Tamaño de la Partícula , Polímeros/química , SolucionesRESUMEN
This study leverages the ancient craft of weaving to prepare membranes that can effectively treat oil/water mixtures, specifically challenging nanoemulsions. Drawing inspiration from the core-shell architecture of spider silk, we have engineered fibers, the fundamental building blocks for weaving membranes, that feature a mechanically robust core for tight weaving, coupled with a CO2-responsive shell that allows for on-demand wettability adjustments. Tightly weaving these fibers produces membranes with ideal pores, achieving over 99.6% separation efficiency for nanoemulsions with droplets as small as 20 nm. They offer high flux rates, on-demand self-cleaning, and can switch between sieving oil and water nanodroplets through simple CO2/N2 stimulation. Moreover, weaving can produce sufficiently large membranes (4800 cm2) to assemble a module that exhibits long-term stability and performance, surpassing state-of-the-art technologies for nanoemulsion separations, thus making industrial application a practical reality.
RESUMEN
Two-dimensional (2D) membrane-based ion separation technology has been increasingly explored to address the problem of lithium resource shortage, yet it remains a sound challenge to design 2D membranes of high selectivity and permeability for ion separation applications. Zeolitic imidazolate framework functionalized modified layered double hydroxide (ZIF-8@MLDH) composite membranes with high lithium-ion (Li+) permeability and excellent operational stability were obtained in this work by in situ depositing functional ZIF-8 nanoparticles into the nanopores acting as framework defects in MLDH membranes. The defect-rich framework amplified the permeability of Li+, and the site-selective growth of ZIF-8 in the framework defects bettered its selectivity. Specifically speaking, the ZIF-8@MLDH membranes featured a high permeation rate of Li+ up to 1.73 mol m-2 h-1 and a desirable selectivity of Li+/Mg2+ up to 31.9. Simulations supported that the simultaneously enhanced selectivity and permeability of Li+ are attributed to changes in the type of mass transfer channels and the difference in the dehydration capacity of hydrated metal cations when they pass through nanochannels of ZIF-8. This study will inspire the ongoing research of high-performance 2D membranes through the engineering of defects.
RESUMEN
The successful implementation of thin-film composite membranes (TFCM) for challenging solute-solute separations in the pharmaceutical industry requires a fine control over the microstructure (size, distribution, and connectivity of the free-volume elements) and thickness of the selective layer. For example, desalinating antibiotic streams requires highly interconnected free-volume elements of the right size to block antibiotics but allow the passage of salt ions and water. Here, we introduce stevioside, a plant-derived contorted glycoside, as a promising aqueous phase monomer for optimizing the microstructure of TFCM made via interfacial polymerization. The low diffusion rate and moderate reactivity of stevioside, together with its nonplanar and distorted conformation, produced thin selective layers with an ideal microporosity for antibiotic desalination. For example, an optimized 18-nm membrane exhibited an unprecedented combination of high water permeance (81.2 liter m-2 hour-1 bar-1), antibiotic desalination efficiency (NaCl/tetracycline separation factor of 11.4), antifouling performance, and chlorine resistance.
Asunto(s)
Antibacterianos , Tetraciclina , Cloruros , Extractos Vegetales , PoliésteresRESUMEN
Polymeric nanomaterials, which have tuneable chemical structures, versatile functionalities, and good compatibility with polymeric matrices, have attracted increasing interest from researchers for the construction of polymeric nano-based separation membranes. With their distinctive nanofeatures, polymeric nano-based membranes show great promise in overcoming bottlenecks in polymer membranes, namely, the trade-off between permeability and selectivity, low stability, and fouling issues. Accordingly, recent studies have focused on tuning the structures and tailoring the surface properties of polymeric nano-based membranes via exploitation of membrane fabrication techniques and surface modification strategies, with the objective of pushing the performance of polymeric nano-based membranes to a new level. In this review, first, the approaches for fabricating polymeric nano-based mixed matrix membranes and homogeneous membranes are summarized, such as surface coating, phase inversion, interfacial polymerization, and self-assembly methods. Next, the manipulation strategies of membrane surface properties, namely, the hydrophilicity/hydrophobicity, charge characteristics, and surface roughness, and interior microstructural properties, namely, the pore size and content, channel construction and regulation, are comprehensively discussed. Subsequently, the separation performances of liquid ions/molecules and gas molecules through polymeric nano-based membranes are systematically reported. Finally, we conclude this review with an overview of various unsolved scientific and technical challenges that are associated with new opportunities in the development of advanced polymeric nano-based membranes.
RESUMEN
Functional membranes generally wear out when applying in harsh conditions such as a strong acidic environment. In this work, high acid-resistance, long-lasting, and low-cost functional membranes are prepared from engineered hydrogen-bonding and pH-responsive supramolecular nanoparticle materials. As a proof of concept, the prepared membranes for dehydration of alcohols are utilized. The synthesized membranes have achieved a separation factor of 3000 when changing the feed solution pH from 7 to 1. No previous reports have demonstrated such unprecedentedly high-record separation performance (pervaporation separation index is around 1.1 × 107 g m-2 h-1 ). More importantly, the engineered smart membrane possesses fast self-repairing ability (48 h) that is inherited from the dynamic hydrogen bonds between the hydroxyl groups of polyacrylic acid and carbonyl groups of polyvinylpyrrolidone. To this end, the designed supramolecular materials offer the membrane community a new material type for preparing high acid resistance and long-lasting membranes for harsh environmental cleaning applications.
RESUMEN
Nanofluidics derived from low-dimensional nanosheets and protein nanochannels are crucial for advanced catalysis, sensing, and separation. However, polymer nanofluidics is halted by complicated preparation and miniaturized sizes. This work reports the bottom-up synthesis of modular nanofluidics by confined growth of ultrathin metal-organic frameworks (MOFs) in a polymer membrane consisting of zwitterionic dopamine nanoparticles (ZNPs). The confined growth of the MOFs on the ZNPs reduces the chain entanglement between the ZNPs, leading to stiff interfacial channels enhancing the nanofluidic transport of water molecules through the membrane. As such, the water permeability and solute selectivity of MOF@ZNPM are one magnitude improved, leading to a record-high performance among all polymer nanofiltration membranes. Both the experimental work and the molecular dynamics simulations confirm that the water transport is shifted from high-friction-resistance conventional viscous flow to ultrafast nanofluidic flow as a result of rigid and continuous nanochannels in MOF@ZNPM.
RESUMEN
Assembling two-dimensional (2D) materials by polyelectrolyte often suffers from inhomogeneous microstructures due to the conventional mixing-and-simultaneous-complexation procedure ("mix-and-complex") in aqueous solution. Herein a "mix-then-on-demand-complex" concept via on-demand in situ cascade anionization and ionic complexation of 2D materials is raised that drastically improves structural order in 2D assemblies, as exemplified by classical graphene oxide (GO)-based ultrathin membranes. Specifically, in dimethyl sulfoxide, the carboxylic acid-functionalized GO sheets (COOH-GOs) were mixed evenly with a cationic poly(ionic liquid) (PIL) and upon filtration formed a well-ordered layered composite membrane with homogeneous distribution of PIL chains in it; next, whenever needed, it was alkali-treated to convert COOH-GO in situ into its anionized state COO--GO that immediately complexed ionically with the surrounding cationic PIL chains. This "mix-then-on-demand-complex" concept separates the ionic complexation of GO and polyelectrolytes from their mixing step. By synergistically combining the PIL-induced hydrophobic confinement effect and supramolecular interactions, the as-fabricated nanofiltration membranes carry interface transport nanochannels between GO and PIL, reaching a high water permeability of 96.38 L m-2 h-1 bar-1 at a maintained excellent dye rejection 99.79% for 150 h, exceeding the state-of-the-art GO-based hybrid membranes. The molecular dynamics simulations support the experimental data, confirming the interface spacing between GO and PIL as the water transport channels.
RESUMEN
The robustness of carbon nanomaterials and their potential for ultrahigh permeability has drawn substantial interest for separation processes. However, graphene oxide membranes (GOms) have demonstrated limited viability due to instabilities in their microstructure that lead to failure under cross-flow conditions and applied hydraulic pressure. Here we present a highly stable and ultrapermeable zeolitic imidazolate framework-8 (ZIF-8)-nanocrystal-hybridized GOm that is prepared by ice templating and subsequent in situ crystallization of ZIF-8 at the nanosheet edges. The selective growth of ZIF-8 in the microporous defects enlarges the interlayer spacings while also imparting mechanical integrity to the laminate framework, thus producing a stable microstructure capable of maintaining a water permeability of 60 l m-2 h-1 bar-1 (30-fold higher than GOm) for 180 h. Furthermore, the mitigation of microporous defects via ZIF-8 growth increased the permselectivity of methyl blue molecules sixfold. Low-field nuclear magnetic resonance was employed to characterize the porous structure of our membranes and confirm the tailored growth of ZIF-8. Our technique for tuning the membrane microstructure opens opportunities for developing next-generation nanofiltration membranes.
RESUMEN
Water transport rate in network membranes is inversely correlated to thickness, thus superior permeance is achievable with ultrathin membranes prepared by complicated methods circumventing nanofilm weakness and defects. Conferring ultrahigh permeance to easily prepared thicker membranes remains challenging. Here, a tetrakis(hydroxymethyl) phosphonium chloride (THPC) monomer is discovered that enables straightforward modification of polyamide composite membranes. Water permeance of the modified membrane is ≈6 times improved, give rising to permeability (permeance × thickness) one magnitude higher than state-of-the-art polymer nanofiltration membranes. Meanwhile, the membrane exhibits good rejection (RNa2SO4 = 98%) and antibacterial properties under crossflow conditions. THPC modification not only improves membrane hydrophilicity, but also creates additional angstrom-scale channels in polyamide membranes for unimpeded transport of water. This unique mechanism provides a paradigm shift in facile preparation of ultrapermeable membranes with unreduced thickness for clean water and desalination.
Asunto(s)
Antibacterianos/química , Antibacterianos/farmacología , Membranas Artificiales , Nylons/química , Nylons/farmacología , Compuestos Organofosforados/química , Permeabilidad , Agua/químicaRESUMEN
In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing "ion pairs". In this review, the effects of "ion pairs" characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with "ion pairs" are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with "ion pairs".
RESUMEN
Membrane support properties influence the performance of thin-film composite nanofiltration membranes. We fabricated several polysulfone (PSf) supports. The physicochemical properties of PSf were altered by adding polyethylene glycol (PEG) of varying molecular weights (200â»35,000 g/mol). This alteration facilitated the formation of a thin polyamide layer on the PSf surface during the interfacial polymerization reaction involving an aqueous solution of piperazine containing 4-aminobenzoic acid and an organic solution of trimesoyl chloride. Attenuated total reflectance-Fourier transform infrared validated the presence of PEG in the membrane support. Scanning electron microscopy and atomic force microscopy illustrated that the thin-film polyamide layer morphology transformed from a rough to a smooth surface. A cross-flow filtration test indicated that a thin-film composite polyamide membrane comprising a PSf support (TFC-PEG20k) with a low surface porosity, small pore size, and suitable hydrophilicity delivered the highest water flux and separation efficiency (J = 81.1 ± 6.4 L·m-2·h-1, RNa2SO4 = 91.1% ± 1.8%, and RNaCl = 35.7% ± 3.1% at 0.60 MPa). This membrane had a molecular weight cutoff of 292 g/mol and also a high rejection for negatively charged dyes. Therefore, a PSf support exhibiting suitable physicochemical properties endowed a thin-film composite polyamide membrane with high performance.
RESUMEN
The poor dispensability of pristine carbon nanotubes in water impedes their implications in thin-film nanocomposite membranes for crucial utilities such as water purification. In this work, high-flux positively charged nanocomposite nanofiltration membranes were exploited by uniformly embedding poly(dopamine) modified multiwall carbon nanotubes (PDA-MWCNTs) in polyamide thin-film composite membranes. With poly(dopamine) modification, fine dispersion of MWCNTs in polyethyleneimine (PEI) aqueous solutions was achieved, which was interracially polymerized with trimesoyl chloride (TMC) n-hexane solutions to prepare nanocomposite membranes. The compatibility and interactions between modified MWCNTs and polyamide matrix were enhanced, attributed to the poly(dopamine) coatings on MWCNT surfaces, leading to significantly improved water permeability. At optimized conditions, pure water permeability of the PEI/PDA-MWCNTs/TMC nanofiltration membrane (M-4) was 15.32 L m(-2) h(-1) bar(-1), which was â¼1.6 times increased compared with that of pristine PEI/TMC membranes. Salt rejection of M-4 to different multivalent cations decreased in the sequence ZnCl2 (93.0%) > MgCl2 (91.5%) > CuCl2 (90.5%) ≈ CaCl2, which is well-suited for water softening and heavy metal ion removal.
RESUMEN
Hydrophilic polymers have garnered much attention due to their critical roles in various applications such as molecular separation membranes, bio-interfaces, and surface engineering. However, a long-standing problem is that their mechanical properties usually deteriorate at high relative humidity (RH). Through the simultaneous incorporation of functionalized carbon nanotubes and copper ions (Cu(2+)), this study introduces a facile method to fabricate high strength polyelectrolyte complex nanohybrid membranes resistant to high RH (90%). For example, the tensile strength of the nanohybrid membranes is 55 MPa at 90% RH (80% of the original value at 30% RH). These results are explained by copper ions depressing the swelling degree of the membrane, and functionalized carbon nanotubes promoting stress transfer between the polymer matrix and them. The nanohybrid membranes are efficient in separating water/alcohol mixtures containing relatively high water content (up to 30 wt%), whereas common hydrophilic polymer membranes usually suffer from excessive swelling under this condition.