Afterglow Nanoprobe-Enabled Quantitative Lateral Flow Immunoassay by a Palm-Size Device for Household Healthcare.

Lateral flow immunoassay (LFIA), a classical point-of-care testing (POCT) technique, plays an important role in disease screening and healthcare monitoring. However, traditional LFIA is either designed for qualitative analysis or requires expensive equipment for quantification, limiting its use in household diagnosis. In this study, we proposed a new generation of LFIA for household health monitoring by using ultralong organic phosphorescence (UOP) nanomaterials as afterglow nanoprobes with a self-developed palm-size sensing device. The UOP nanoprobes exhibit a phosphorescence signal with a second-level lifetime, which completely avoids the interference from excitation light and biological background fluorescence. Therefore, an ultraminiaturized and low-cost UOP nanosensor was successfully designed by eliminating the complex optical path and filtering systems. We chose an inflammatory factor, C-reactive protein (CRP), for household POCT validation. The whole analysis was completed within 9 min. A limit of detection (LOD) of 0.54 ng/mL of CRP antigen was achieved with high stability and good specificity, which is comparable to laboratory instruments and fully satisfying the clinical diagnosis requirement.

Organic Phosphorescent Hopper-Shaped Microstructures.

Hopper-shaped microcrystals, an unusual type of crystal with a large specific surface area, are promising for use in catalysis, drug delivery, and gas sensors. In contrast to well-studied inorganic hopper-shaped crystals, organic phosphorescent concave hopper-shaped microstructures are rarely reported. This study reports the synthesis of two types of organic stepped indented hopper-shaped microstructures with efficient room temperature phosphorescence (RTP) using a liquid phase self-assembly strategy. The formation mechanism is attributed to the interfacial instability induced by the concentration gradient and selective etching. Compared with flat microstructures, the stepped indented hopper-like RTP microstructures exhibit high sensitivity to oxygen. This work also demonstrates that packing the photochromic material into the concave hopper "vessel" effectively controls the switch of phosphorescence from energy transfer, expanding the potential applications of phosphorescent materials.

Modulating Heavy Atom Effect in Germylene for Persistent Room Temperature Phosphorescence.

It is worth but still challenging to develop the low-valent main group compounds with persistent room temperature phosphorescence (pRTP). Herein, we presented germylene-based persistent phosphors by introduction of low-valent Ge center into chromophore. A novel phosphors CzGe and its series of derivatives, namely CzGeS, CzGeSe, CzGeAu, and CzGeCu, were synthesized. Experiments and theoretical calculations reveal that the pRTP behavior were "turn on" due to the heavy atom effect of germylene. More importantly, the low-valent of oxidation state and structural traits propelled GeCz had a balance between the intersystem crossing and the shortening of lifetime caused by the heavy atoms, resulting the ultralong lifetime of 309 ms and phosphorescent quantum efficiency of 15.84 %, which is remarkable among heavy main group phosphors.This research provides valuable insights to the design of heavy atoms in phosphors and expand the applications of germylene chemistry.

Ground-State Orbital Descriptors for Accelerated Development of Organic Room-Temperature Phosphorescent Materials.

Organic materials with room-temperature phosphorescence (RTP) are in high demand for optoelectronics and bioelectronics. Developing RTP materials highly relies on expert experience and costly excited-state calculations. It is a challenge to find a tool for effectively screening RTP materials. Herein we first establish ground-state orbital descriptors (πFMOs ) derived from the π-electron component of the frontier molecular orbitals to characterize the RTP lifetime (τp ), achieving a balance in screening efficiency and accuracy. Using the πFMOs , a data-driven machine learning model gains a high accuracy in classifying long τp , filtering out 836 candidates with long-lived RTP from a virtual library of 19,295 molecules. With the aid of the excited-state calculations, 287 compounds are predicted with high RTP efficiency. Impressively, experiments further confirm the reliability of this workflow, opening a novel avenue for designing high-performance RTP materials for potential applications.

Achieving High-Temperature Phosphorescence by Organic Cocrystal Engineering.

Organic phosphors offer a promising alternative in optoelectronics, but their temperature-sensitive feature has restricted their applications in high-temperature scenarios, and the attainment of high-temperature phosphorescence (HTP) is still challenging. Herein, a series of organic cocrystal phosphors are constructed by supramolecular assembly with an ultralong emission lifetime of up to 2.16 s. Intriguingly, remarkable stabilization of triplet excitons can also be realized at elevated temperature, and green phosphorescence is still exhibited in solid state even up to 150 °C. From special molecular packing within the crystal lattice, it has been observed that the orientation of isolated water cluster and well-controlled molecular organization via multiple interactions can favor the structural rigidity of cocrystals more effectively to suppress the nonradiative transition, thus resulting in efficient room-temperature phosphorescence and unprecedented survival of HTP.

Organic-Inorganic Hybrid Ferroelectric and Antiferroelectric with Afterglow Emission.

Luminescent ferroelectrics are holding exciting prospect for integrated photoelectronic devices due to potential light-polarization interactions at electron scale. Integrating ferroelectricity and long-lived afterglow emission in a single material would offer new possibilities for fundamental research and applications, however, related reports have been a blank to date. For the first time, we here achieved the combination of notable ferroelectricity and afterglow emission in an organic-inorganic hybrid material. Remarkably, the presented (4-methylpiperidium)CdCl3 also shows noticeable antiferroelectric behavior. The implementation of cationic customization and halogen engineering not only enables a dramatic enhancement of Curie temperature of 114.4 K but also brings a record longest emission lifetime up to 117.11 ms under ambient conditions, realizing a leapfrog improvement of at least two orders of magnitude compared to reported hybrid ferroelectrics so far. This finding would herald the emergence of novel application potential, such as multi-level density data storage or multifunctional sensors, towards the future integrated optoelectronic devices with multitasking capabilities.

Recent Advances of Carbon Dots with Afterglow Emission.

Carbon dots (CDs) have gradually become a new generation of nano-luminescent materials, which have received extensive attention due to excellent optical properties, wide source of raw materials, low toxicity, and good biocompatibility. In recent years, there are many reports on the luminescent phenomenon of CDs, and great progress has been achieved. However,there are rarely systematic summaries on CDs with persistent luminescence. Here, a summary of the recent progress on persistent luminescent CDs, including luminous mechanism, synthetic strategies, property regulation, and potential applications, is given. First, a brief introduction is given to the development of CDs luminescent materials. Then, the luminous mechanism of afterglow CDs from room temperature phosphorescence (RTP), delayed fluorescence (DF), and long persistent luminescence (LPL) is discussed. Next, the constructed methods of luminescent CDs materials are summarized from two aspects, including matrix-free self-protected and matrix-protected CDs. Moreover, the regulation of afterglow properties from color, lifetime, and efficiency is presented. Afterwards, the potential applications of CDs, such as anti-counterfeiting, information encryption, sensing, bio-imaging, multicolor display, LED devices, etc., are reviewed. Finally, an outlook on the development of CDs materials and applications is proposed.

Ultralong Organic Phosphorescence: From Material Design to Applications.

Organic phosphorescence is defined as a radiative transition between the different spin multiplicities of an organic molecule after excitation; here, we refer to the photoexcitation. Unlike fluorescence, it shows a long emission lifetime (∼µs), large Stokes shift, and rich excited state properties, attracting considerable attention in organic electronics during the past years. Ultralong organic phosphorescence (UOP), a type of persistent luminescence in organic phosphors, shows an emission lifetime of over 100 ms normally according to the resolution limit of the naked eye. According to the Jablonski energy diagram, two prerequisites are necessary for UOP generation and enhancement. One is to promote intersystem crossing (ISC) of the excitons from the excited singlet to triplet states by enhancing the spin-orbit coupling (SOC); the other is to suppress the nonradiative transitions of the excitons from the excited triplet states.In this Account, we will give a summary of our research on ultralong organic phosphorescence, including the design of materials, manipulation of properties, fabrication of nano/microstructures, and function applications. First, we give a brief introduction to the UOP development. Then, we discuss the constructed methods of UOP materials from the inter/intramolecular interaction types, including π-π interactions, intermolecular hydrogen bonds, halogen bonds, ionic bonds, covalent bonds, and so on. These effective interactions can build a rigid environment to restrain the nonradiative transitions from the molecular motions or external quenching by oxygen, moisture, or heat, and thus enhance the UOP performance. Next, the manipulation of UOP properties, containing excitation wavelength, emission colors, lifetimes, and quantum efficiency (QE), through molecular or crystal engineering will be summarized. Recently, the excitation wavelengths of the materials for UOP can be regulated in different regions, such as UV, visible light, and X-ray; the emission colors of UOP can cover the whole visible-light region, from deep blue to red; the phosphorescence lifetime of UOP materials can reach 2.5 s, and the quantum efficiency can be achieved up to 96.5%. Moreover, we will present the fabrication of micro/nanoscale UOP materials, including the preparation of micro/nanostructure, optical performance, and device fabrication. Afterward, we will review the potential applications of UOP materials in organic/bio-optoelectronics, such as information encryption, bioimaging, sensing, afterglow display, etc. Finally, an outlook on the development of UOP materials and applications will be proposed.

Excitation-Dependent Multicolour Luminescence of Organic Materials: Internal Mechanism and Potential Applications.

Excitation-dependent emission (Ex-de) materials have been of considerable academic interest and have potential applications in real life. Such multicolour luminescence is a characteristic exception to the ubiquitously accepted Kasha's rule. This phenomenon has been increasingly presented in some studies on different luminescence systems; however, a systematic overview of the mechanisms underlying this phenomenon is currently absent. Herein, we resolve this issue by classifying multicolour luminescence from single chromophores and dual/ternary chromophores, as well as multiple emitting species. The underlying processes are described based on electronic and/or geometrical conditions under which the phenomenon occurs. Before we present it in categories, related photophysical and photochemical foundations are introduced. This systematic overview will provide a clear approach to designing multicolour luminescence materials for special applications.

Supercooled Liquids with Dynamic Room Temperature Phosphorescence Using Terminal Hydroxyl Engineering.

Dynamic room temperature phosphorescence (RTP) materials have potential applications in optoelectronics, which inevitably suffer from poor processability, flexibility or stretchability. Herein, we report a concise strategy to develop supercooled liquids (SCLs) with dynamic RTP behavior using terminal hydroxyl engineering. The terminal hydroxyls effectively hinder the nucleation process of molecules for the formation of stable SCLs after thermal annealing. Impressively, the SCLs show reversible RTP emission via alternant stimulation by UV light and heat. Photoactivated SCLs have phosphorescent efficiency of 8.50 % and a lifetime of 31.54 ms under ambient conditions. Regarding the dynamic RTP behavior and stretchability of SCLs, we demonstrate the applications in erasable data encryption and patterns on flexible substrates. This finding provides a design principle for obtaining SCLs with RTP and expands the potential applications of RTP materials in flexible optoelectronics.

Organic Excitonic State Management by Surface Metallic Coupling of Inorganic Lanthanide Nanocrystals.

The ability to harness charges and spins for control of organic excitonic states is critical in developing high-performance organic luminophores and optoelectronic devices. Here we report a facile strategy to efficiently manipulate the electronic energy states of various organic phosphors by coupling them with inorganic lanthanide nanocrystals. We show that the metallic atoms exposed on the nanocrystal surface can introduce strong coupling effects to 9-(4-ethoxy-6-phenyl-1,3,5-triazin-2-yl)-9H-carbazole (OCzT) and some organic chromophores with carbazole functional groups when the organics are approaching the nanocrystals. This unconventional organic-inorganic hybridization enables a nearly 100 % conversion of the singlet excitation to fast charge transfer luminescence that does not exist in pristine organics, which broadens the utility of organic phosphors in hybrid systems.

Confining isolated chromophores for highly efficient blue phosphorescence.

High-efficiency blue phosphorescence emission is essential for organic optoelectronic applications. However, synthesizing heavy-atom-free organic systems having high triplet energy levels and suppressed non-radiative transitions-key requirements for efficient blue phosphorescence-has proved difficult. Here we demonstrate a simple chemical strategy for achieving high-performance blue phosphors, based on confining isolated chromophores in ionic crystals. Formation of high-density ionic bonds between the cations of ionic crystals and the carboxylic acid groups of the chromophores leads to a segregated molecular arrangement with negligible inter-chromophore interactions. We show that tunable phosphorescence from blue to deep blue with a maximum phosphorescence efficiency of 96.5% can be achieved by varying the charged chromophores and their counterions. Moreover, these phosphorescent materials enable rapid, high-throughput data encryption, fingerprint identification and afterglow display. This work will facilitate the design of high-efficiency blue organic phosphors and extend the domain of organic phosphorescence to new applications.

Ultralong Organic Phosphorescent Foams with High Mechanical Strength.

Ultralong organic phosphorescence (UOP) has aroused enormous interest in recent years. UOP materials are mainly limited to crystals or rigid host-guest systems. Their poor processability and mechanical properties critically hamper practical applications. Here, we reported a series of ultralong phosphorescent foams with high mechanical strength. Phosphorescence lifetime of the foam can reach up to 485.8 ms at room temperature. Impressively, lightweight gelatin foam can bear a compressive pressure of 4.44 MPa. Moreover, phosphorescence emission of polymer foam can be tuned from blue to orange through varying the excitation wavelength. Experimental data and theoretical calculations revealed that ultralong phosphorescence was ascribed to the fixation of multiple hydrogen bonds to the clusters of carbonyl groups. These results will allow for expanding the scope of luminescent foams, providing an ideal platform for developing ultralong phosphorescent materials with high mechanical strength.

Circularly Polarized Organic Room Temperature Phosphorescence from Amorphous Copolymers.

Organic optoelectronic functional materials featuring circularly polarized emission and persistent luminescence represent a novel research frontier and show promising applications in data encryption, displays, biological imaging, and so on. Herein, we present a simple and universal approach to achieve circularly polarized organic phosphorescence (CPP) from amorphous copolymers by the incorporation of axial chiral chromophores into polymer chains via radical cross-linked polymerization. Our experimental data reveal that copolymers (R/S)-PBNA exhibit a maximum CPP efficiency of 30.6% and the largest dissymmetric factor of 9.4 × 10-3 and copolymers (R/S)-PNA show the longest lifetime of 0.68 s under ambient conditions. Given the CPP property of these copolymers, their potential applications in multiple information encryption and displays are demonstrated, respectively. These findings not only lay the foundation for the development of amorphous polymers with superior CPP but also expand the outlook of room-temperature phosphorescent materials.

Microscopic Afterglow Bioimaging by Ultralong Organic Phosphorescent Nanoparticles in Living Cells and Zebrafish.

Compared with short-lived emission probes featuring fluorescence imaging , the use of phosphorescent probes imparts the advantage of long-lived signal persistence that distinguishes against background fluorescence interference. However, the realization of ultralong organic phosphorescent (UOP) probes with an ultralong emission lifetime in an aqueous medium is still a challenge. Here, we present a rational strategy for obtaining UOP nanoparticles (NPs) in an air-saturated aqueous medium prepared using an organic phosphor (PDBCz) and a surfactant polymer (PVP), named PDBCz@PVP, showing an ultralong emission lifetime of 284.59 ms and a phosphorescence quantum efficiency of 7.6%. The excellent phosphorescence properties and water solubility of PDBCz@PVP make it a promising candidate for biological imaging. The as-prepared PDBCz@PVP NPs possess excellent luminescence intensity as well as illustrious biocompatibility both in vitro and in vivo. We demonstrate their use as an efficient phosphorescent nanoprobe both in living cells and zebrafish by capturing their afterglow emission signals under microscopy observation for the first time, realizing convenient and fast bioimaging with low cost, which allows for anti-fluorescence interference and shows promise for the future theragnostic applications in nanomedicine.

Molecular Engineering through Control of Structural Deformation for Highly Efficient Ultralong Organic Phosphorescence.

It is an enormous challenge to achieve highly efficient organic room-temperature phosphorescence (RTP) with a long lifetime. We demonstrate that, by bridging the carbazole and halogenated phenyl ring with a methylene linker, RTP phosphors CzBX (X=Cl, Br) present high phosphorescence efficiency (ΦPh ). A ΦPh up to 38 % was obtained for CzBBr with a lifetime of 220 ms, which is much higher than that of compounds CzPX (X=Cl, Br) with a C-N bond as a linker (ΦPh <1 %). Single-crystal analysis and theoretical calculations revealed that, in the crystal phase, intermolecular π-Br interactions accelerate the intersystem crossing process, while tetrahedron-like structures induced by sp3 methylene linkers restrain the nonradiative decay channel, leading to the high phosphorescence efficiency in CzBBr. This research paves a new road toward highly efficient and long-lived RTP materials with potential applications in anti-counterfeiting or data encryption.

Influence of Isomerism on Radioluminescence of Purely Organic Phosphorescence Scintillators.

There are few reports about purely organic phosphorescence scintillators, and the relationship between molecular structures and radioluminescence in organic scintillators is still unclear. Here, we presented isomerism strategy to study the effect of molecular structures on radioluminescence. The isomers can achieve phosphorescence efficiency of up to 22.8 % by ultraviolet irradiation. Under X-ray irradiation, both m-BA and p-BA show excellent radioluminescence, while o-BA has almost no radioluminescence. Through experimental and theoretical investigation, we found that radioluminescence was not only affected by non-radiation in emissive process, but also highly depended on the material conductivity caused by the different molecular packing. This study not only allows us to clearly understand the relationship between the molecular structures and radioluminescence, but also provides a guidance to rationally design new organic scintillators.

Hydrophilic Ultralong Organic Nanophosphors.

Ultralong organic phosphorescence (UOP), enabling of persistent luminescence after removal of external excitation light, shows great promise in biological applications such as bioimaging in virtue of antibackground fluorescence interference. Despite of good biocompatibility and outstanding phosphorescent properties, most current organic phosphors are hydrophobic with poor water solubility in the form of bulk crystal with large size, limiting their potential in the biological field. Here, a facile and versatile approach is provided to obtain nanoscale hydrophilic phosphorescent phosphors (HPPs) by physically loading ultralong organic phosphors into hollow mesoporous silica nanoparticles. The as-prepared HPPs can be well suspended in aqueous solution and effectively internalized by HeLa cells with very low cytotoxicity. Such HPPs are successfully applied for afterglow bioimaging in living nude mice with a very high signal-to-noise ratio up to 31. The current study not only provides a universal strategy to realize UOP in aqueous media but also demonstrates their great potential for biomedical purposes as an advanced imaging indicator with long-lived emission lifetime.

Manipulating the Ultralong Organic Phosphorescence of Small Molecular Crystals.

Ultralong organic phosphorescence (UOP) of metal-free organic materials has received considerable attention recently owing to their long-lived emission lifetimes, and the fact that they present an attractive alternative to persistent luminescence in inorganic phosphors. Enormous research effort has been devoted on improving UOP performance in metal-free organic phosphors by promoting the intersystem crossing (ISC) process and suppressing the non-radiative decay of triplet state excitons. This minireview summarizes the recent advances in the rational approaches for manipulating the UOP properties of small molecular crystals, such as phosphorescence lifetime, efficiency, and emission colors. Finally, the present challenges and future development of this field are proposed. This review will provide a guideline to rationally design more advanced metal-free organic phosphorescence materials for potential applications.

Efficient and Long-Lived Room-Temperature Organic Phosphorescence: Theoretical Descriptors for Molecular Designs.

Room-temperature phosphorescence (RTP) with long afterglow from pure organic materials has attracted great attention for its potential applications in biological imaging, digital encryption, optoelectronic devices, and so on. Organic materials have been long considered to be nonphosphorescent owing to their weak molecular spin-orbit coupling and high sensitivity to temperature. However, recently, some purely organic compounds have demonstrated highly efficient RTP with long afterglow upon aggregation, while others fail. Namely, it remains a challenge to expound on the underlying mechanisms. In this study, we present the molecular descriptors to characterize the phosphorescence efficiency and lifetime. For a prototypical RTP system consisting of a carbonyl group and π-conjugated segments, the excited states can be regarded as an admixture of n → π* (with portion α) and π → π* (portion ß). Starting from the phosphorescent process and El-Sayed rule, we deduced that (i) the intersystem crossing (ISC) rate of S1 → T n is mostly governed by the modification of the product of α and ß and (ii) the ISC rate of T1 → S0 is determined by the ß value of T1. Thus, the descriptors (γ = α × ß, ß) can be employed to describe the RTP character of organic molecules. From hybrid quantum mechanics and molecular mechanics (QM/MM) calculations, we illustrated the relationships among the descriptors (γ, ß), phosphorescence efficiency and lifetime, and spin-orbit coupling constants. We stressed that the large γ and ß values are favorable for the strong and long-lived RTP in organic materials. Experiments have reported confirmations of these molecular design rules.