An Induced Pluripotent Stem Cell Patient Specific Model of Complement Factor H (Y402H) Polymorphism Displays Characteristic Features of Age-Related Macular Degeneration and Indicates a Beneficial Role for UV Light Exposure.

Age-related macular degeneration (AMD) is the most common cause of blindness, accounting for 8.7% of all blindness globally. Vision loss is caused ultimately by apoptosis of the retinal pigment epithelium (RPE) and overlying photoreceptors. Treatments are evolving for the wet form of the disease; however, these do not exist for the dry form. Complement factor H polymorphism in exon 9 (Y402H) has shown a strong association with susceptibility to AMD resulting in complement activation, recruitment of phagocytes, RPE damage, and visual decline. We have derived and characterized induced pluripotent stem cell (iPSC) lines from two subjects without AMD and low-risk genotype and two patients with advanced AMD and high-risk genotype and generated RPE cells that show local secretion of several proteins involved in the complement pathway including factor H, factor I, and factor H-like protein 1. The iPSC RPE cells derived from high-risk patients mimic several key features of AMD including increased inflammation and cellular stress, accumulation of lipid droplets, impaired autophagy, and deposition of "drüsen"-like deposits. The low- and high-risk RPE cells respond differently to intermittent exposure to UV light, which leads to an improvement in cellular and functional phenotype only in the high-risk AMD-RPE cells. Taken together, our data indicate that the patient specific iPSC model provides a robust platform for understanding the role of complement activation in AMD, evaluating new therapies based on complement modulation and drug testing. Stem Cells 2017;35:2305-2320.

Poly(urethane-norbornene) Aerogels via Ring Opening Metathesis Polymerization of Dendritic Urethane-Norbornene Monomers: Structure-Property Relationships as a Function of an Aliphatic Versus an Aromatic Core and the Number of Peripheral Norbornene Moieties.

We report the synthesis and characterization of synthetic polymer aerogels based on dendritic-type urethane-norbornene monomers. The core of those monomers is based either on an aromatic/rigid (TIPM/Desmodur RE), or an aliphatic/flexible (Desmodur N3300) triisocyanate. The terminal norbornene groups (three at the tip of each of the three branches) were polymerized via ROMP using the inexpensive 1st generation Grubbs catalyst. The polymerization/gelation conditions were optimized by varying the amount of the catalyst. The resulting wet-gels were dried either from pentane under ambient pressure at 50 °C, or from t-butanol via freeze-drying, or by using supercritical fluid (SCF) CO2. Monomers were characterized with high resolution mass spectrometry (HRMS), ¹H- and solid-state 13C-NMR. Aerogels were characterized with ATR-FTIR and solid-state 13C-NMR. The porous network was probed with N2-sorption and SEM. The thermal stability of monomers and aerogels was studied with TGA, which also provides evidence for the number of norbornene groups that reacted via ROMP. At low densities (<0.1 g cm−3) all aerogels were highly porous (porosity > 90%), mostly macroporous materials; aerogels based on the aliphatic/flexible core were fragile, whereas aerogels containing the aromatic/rigid core were plastic, and at even lower densities (0.03 g cm−3) foamy. At higher densities (0.2⁻0.7 g cm−3) all materials were stiff, strong, and hard. At low monomer concentrations all aerogels consisted of discrete primary particles that formed spherical secondary aggregates. At higher monomer concentrations the structure consisted of fused particles with the size of the previous secondary aggregates, due to the low solubility of the developing polymer, which phase-separated and formed a primary particle network. Same-size fused aggregates were observed for both aliphatic and aromatic triisocyanate-derived aerogels, leading to the conclusion that it is not the aliphatic or aromatic core that determines phase separation, but rather the solubility of the polymeric backbone (polynorbornene) that is in both cases the same. The material properties were compared to those of analogous aerogels bearing only one norbornene moiety at the tip of each branch deriving from the same cores.

JNK/SAPK Signaling Is Essential for Efficient Reprogramming of Human Fibroblasts to Induced Pluripotent Stem Cells.

Reprogramming of somatic cells to the phenotypic state termed "induced pluripotency" is thought to occur through three consecutive stages: initiation, maturation, and stabilisation. The initiation phase is stochastic but nevertheless very important as it sets the gene expression pattern that permits completion of reprogramming; hence a better understanding of this phase and how this is regulated may provide the molecular cues for improving the reprogramming process. c-Jun N-terminal kinase (JNK)/stress-activated protein kinase (SAPKs) are stress activated MAPK kinases that play an essential role in several processes known to be important for successful completion of the initiation phase such as cellular proliferation, mesenchymal to epithelial transition (MET) and cell cycle regulation. In view of this, we postulated that manipulation of this pathway would have significant impacts on reprogramming of human fibroblasts to induced pluripotent stem cells. Accordingly, we found that key components of the JNK/SAPK signaling pathway increase expression as early as day 3 of the reprogramming process and continue to rise in reprogrammed cells throughout the initiation and maturation stages. Using both chemical inhibitors and RNA interference of MKK4, MKK7 and JNK1, we tested the role of JNK/SAPK signaling during the initiation stage of neonatal and adult fibroblast reprogramming. These resulted in complete abrogation of fully reprogrammed colonies and the emergence of partially reprogrammed colonies which disaggregated and were lost from culture during the maturation stage. Inhibition of JNK/SAPK signaling resulted in reduced cell proliferation, disruption of MET and loss of the pluripotent phenotype, which either singly or in combination prevented establishment of pluripotent colonies. Together these data provide new evidence for an indispensable role for JNK/SAPK signaling to overcome the well-established molecular barriers in human somatic cell induced reprogramming. Stem Cells 2016;34:1198-1212.

A putative role for the immunoproteasome in the maintenance of pluripotency in human embryonic stem cells.

The function of the proteasome is essential for maintenance of cellular homeostasis, and in pluripotent stem cells, this has been extended to the removal of nascent proteins in a manner that restricts differentiation. In this study, we show enhanced expression of genes encoding subunits of the 20S proteasome in human embryonic stem cells (hESCs) coupled to their downregulation as the cells progress into differentiation. The decrease in expression is particularly marked for the alternative catalytic subunits of the 20S proteasome variant known as the immunoproteasome indicating the possibility of a hitherto unknown function for this proteasome variant in pluripotent cells. The immunoproteasome is normally associated with antigen-presenting cells where it provides peptides of an appropriate length for antibody generation; however, our data suggest that it may be involved in maintaining the pluripotency in hESCs. Selective inhibition of two immunoproteasome subunits (PSMB9 and PSMB8) results in downregulation of cell surface and transcriptional markers that characterize the pluripotent state, subtle cell accumulation in G1 at the expense of S-phase, and upregulation of various markers characterizing the differentiated primitive and definitive lineages arising from hESC. Our data also support a different function for each of these two subunits in hESC that may be linked to their selectivity in driving proteasome-mediated degradation of cell cycle regulatory components and/or differentiation inducing factors.

Tailoring the morphology of poly(ethylene oxide)/silver triflate blends: from crystalline to self-assembled nanofibrillar structures.

Interaction of polyethylene oxide (PEO) with transition metal triflates is a newly emerging research area due to its numerous application fields, such as thin-film power conversion devices and sensors. In the present study, we demonstrate, for the first time, that PEO can solvate silver triflate organic salts in large quantities when formic acid is used as a common solvent for both. Nanocomposites with unique structural and electrical properties are fabricated by simply drop casting formic acid solutions of PEO and silver triflate salts. We present a detailed experimental study on the characterization of morphological and electrical properties of PEO-silver triflate nanocomposite films as a function of silver triflate concentration and discuss their potential applications as humidity sensors. In particular, by increasing the concentration of the salt in the initial solution the morphological features of the formed nanocomposites can be varied from well defined microcrystals to amorphous nanofibers. Of special interest are the nanocomposite films fabricated from a 1:1 (PEO-unit:Ag(+)) molar ratio, since they consist of self-assembled nanofibrillar structures, which exhibit good electrical conductivity as well as highly repeatable sensitivity towards humidity.

A new class of third-order nonlinear optical materials: laser pulse-duration dependant saturable absorption and nonlinear refraction in platinum(II) diimine-dithiolate complexes.

The third-order nonlinear optical (NLO) properties of a series of platinum diimine-dithiolate complexes [Pt(N^N)(S^S)] were investigated by means of Z-scan measurements, revealing second hyperpolarizability values up to 10-29 esu, saturable absorption properties, and nonlinear refractive behaviour, which were rationalized also by means of DFT calculations.

A key role for telomerase reverse transcriptase unit in modulating human embryonic stem cell proliferation, cell cycle dynamics, and in vitro differentiation.

Embryonic stem cells (ESC) are a unique cell population with the ability to self-renew and differentiate into all three germ layers. Human ESC express the telomerase reverse transcriptase (TERT) gene and the telomerase RNA (TR) and show telomerase activity, but TERT, TR, and telomerase are all downregulated during the differentiation process. To examine the role of telomerase in human ESC self-renewal and differentiation, we modulated the expression of TERT. Upregulation of TERT and increased telomerase activity enhanced the proliferation and colony-forming ability of human ESC, as well as increasing the S phase of the cell cycle at the expense of a reduced G1 phase. Upregulation of TERT expression was associated with increases in CYCLIN D1 and CDC6 expression, as well as hyperphosphorylation of RB. The differentiated progeny of control ESC showed shortening of telomeric DNA as a result of loss of telomerase activity. In contrast, the differentiated cells from TERT-overexpressing ESC maintained high telomerase activity and accumulated lower concentrations of peroxides than wild-type cells, implying greater resistance to oxidative stress. Although the TERT-overexpressing human ESC are able to form teratoma composed of three germ layers in vivo, their in vitro differentiation to all primitive and embryonic lineages was suppressed. In contrast, downregulation of TERT resulted in reduced ESC proliferation, increased G1, and reduced S phase. Most importantly, downregulation of TERT caused loss of pluripotency and human ESC differentiation to extraembryonic and embryonic lineages. Our results indicate for the first time an important role for TERT in the maintenance of human ESC pluripotency, cell cycle regulation, and in vitro differentiation capacity.

Synthetic Polymer Aerogels in Particulate Form.

Aerogels have been defined as solid colloidal or polymeric networks of nanoparticles that are expanded throughout their entire volume by a gas. They have high surface areas, low thermal conductivities, low dielectric constants, and high acoustic attenuation, all of which are very attractive properties for applications that range from thermal and acoustic insulation to dielectrics to drug delivery. However, one of the most important impediments to that potential has been that most efforts have been concentrated on monolithic aerogels, which are prone to defects and their production requires long and costly processing. An alternative approach is to consider manufacturing aerogels in particulate form. Recognizing that need, the European Commission funded "NanoHybrids", a 3.5 years project under the Horizon 2020 framework with 12 industrial and academic partners aiming at aerogel particles from bio- and synthetic polymers. Biopolymer aerogels in particulate form have been reviewed recently. This mini-review focuses on the emerging field of particulate aerogels from synthetic polymers. That category includes mostly polyurea aerogels, but also some isolated cases of polyimide and phenolic resin aerogels. Particulate aerogels covered include powders, micro granules and spherical millimeter-size beads. For the benefit of the reader, in addition to the literature, some new results from our laboratory concerning polyurea particle aerogels are also included.

Putative role of hyaluronan and its related genes, HAS2 and RHAMM, in human early preimplantation embryogenesis and embryonic stem cell characterization.

Human embryonic stem cells (hESC) promise tremendous potential as a developmental and cell therapeutic tool. The combined effort of stimulatory and inhibitory signals regulating gene expression, which drives the tissue differentiation and morphogenetic processes during early embryogenesis, is still very poorly understood. With the scarcity of availability of human embryos for research, hESC can be used as an alternative source to study the early human embryogenesis. Hyaluronan (HA), a simple hydrating sugar, is present abundantly in the female reproductive tract during fertilization, embryo growth, and implantation and plays an important role in early development of the mammalian embryo. HA and its binding protein RHAMM regulate various cellular and hydrodynamic processes from cell migration, proliferation, and signaling to regulation of gene expression, cell differentiation, morphogenesis, and metastasis via both extracellular and intracellular pathways. In this study, we show for the first time that HA synthase gene HAS2 and its binding receptor RHAMM are differentially expressed during all stages of preimplantation human embryos and hESC. RHAMM expression is significantly downregulated during differentiation of hESC, in contrast to HAS2, which is significantly upregulated. Most importantly, RHAMM knockdown results in downregulation of several pluripotency markers in hESC, induction of early extraembryonic lineages, loss of cell viability, and changes in hESC cycle. These data therefore highlight an important role for RHAMM in maintenance of hESC pluripotency, viability, and cell cycle control. Interestingly, HAS2 knockdown results in suppression of hESC differentiation without affecting hESC pluripotency. This suggests an intrinsic role for HAS2 in hESC differentiation process. In accordance with this, addition of exogenous HA to the differentiation medium enhances hESC differentiation to mesodermal and cardiac lineages. Disclosure of potential conflicts of interest is found at the end of this article.

iPSC modeling of severe aplastic anemia reveals impaired differentiation and telomere shortening in blood progenitors.

Aplastic Anemia (AA) is a bone marrow failure (BMF) disorder, resulting in bone marrow hypocellularity and peripheral pancytopenia. Severe aplastic anemia (SAA) is a subset of AA defined by a more severe phenotype. Although the immunological nature of SAA pathogenesis is widely accepted, there is an increasing recognition of the role of dysfunctional hematopoietic stem cells in the disease phenotype. While pediatric SAA can be attributable to genetic causes, evidence is evolving on previously unrecognized genetic etiologies in a proportion of adults with SAA. Thus, there is an urgent need to better understand the pathophysiology of SAA, which will help to inform the course of disease progression and treatment options. We have derived induced pluripotent stem cell (iPSC) from three unaffected controls and three SAA patients and have shown that this in vitro model mimics two key features of the disease: (1) the failure to maintain telomere length during the reprogramming process and hematopoietic differentiation resulting in SAA-iPSC and iPSC-derived-hematopoietic progenitors with shorter telomeres than controls; (2) the impaired ability of SAA-iPSC-derived hematopoietic progenitors to give rise to erythroid and myeloid cells. While apoptosis and DNA damage response to replicative stress is similar between the control and SAA-iPSC-derived-hematopoietic progenitors, the latter show impaired proliferation which was not restored by eltrombopag, a drug which has been shown to restore hematopoiesis in SAA patients. Together, our data highlight the utility of patient specific iPSC in providing a disease model for SAA and predicting patient responses to various treatment modalities.

Copolymerization of Norbornene and Norbornadiene Using a cis-Selective Bimetallic W-Based Catalytic System.

The bimetallic cluster Na[W2(µ-Cl)3Cl4(THF)2]·(THF)3 ({W2}, {W 3 W}6+, a'²e'4), which features a triple metal-metal bond, is a highly efficient room-temperature initiator for ring opening metathesis polymerization (ROMP) of norbornene (NBE) and norbornadiene (NBD), providing high-cis polymers. In this work, {W2} was used for the copolymerization of the aforementioned monomers, yielding statistical poly(norbornene)/poly(norbornadiene) PNBE/PNBD copolymers of high molecular weight and high-cis content. The composition of the polymer chain was estimated by 13C CPMAS NMR data and it was found that the ratio of PNBE/PNBD segments in the polymer chain was relative to the monomer molar ratio in the reaction mixture. The thermal properties of all copolymers were similar, resembled the properties of PNBD homopolymer and indicated a high degree of cross-linking. The morphology of all materials in this study was smooth and non-porous; copolymers with higher PNBE content featured a corrugated morphology. Glass transition temperatures were lower for the copolymers than for the homopolymers, providing a strong indication that those materials featured a branched-shaped structure. This conclusion was further supported by viscosity measurements of copolymers solutions in THF. The molecular structure of those materials can be controlled, potentially leading to well-defined star polymers via the "core-first" synthesis method. Therefore, {W2} is not only a cost-efficient, practical, highly active, and cis-stereoselective ROMP-initiator, but it can also be used for the synthesis of more complex macromolecular structures.

Asymmetric Assembling of Iron Oxide Nanocubes for Improving Magnetic Hyperthermia Performance.

Magnetic hyperthermia (MH) based on magnetic nanoparticles (MNPs) is a promising adjuvant therapy for cancer treatment. Particle clustering leading to complex magnetic interactions affects the heat generated by MNPs during MH. The heat efficiencies, theoretically predicted, are still poorly understood because of a lack of control of the fabrication of such clusters with defined geometries and thus their functionality. This study aims to correlate the heating efficiency under MH of individually coated iron oxide nanocubes (IONCs) versus soft colloidal nanoclusters made of small groupings of nanocubes arranged in different geometries. The controlled clustering of alkyl-stabilized IONCs is achieved here during the water transfer procedure by tuning the fraction of the amphiphilic copolymer, poly(styrene-co-maleic anhydride) cumene-terminated, to the nanoparticle surface. It is found that increasing the polymer-to-nanoparticle surface ratio leads to the formation of increasingly large nanoclusters with defined geometries. When compared to the individual nanocubes, we show here that controlled grouping of nanoparticles-so-called "dimers" and "trimers" composed of two and three nanocubes, respectively-increases specific absorption rate (SAR) values, while conversely, forming centrosymmetric clusters having more than four nanocubes leads to lower SAR values. Magnetization measurements and Monte Carlo-based simulations support the observed SAR trend and reveal the importance of the dipolar interaction effect and its dependence on the details of the particle arrangements within the different clusters.

Facile transformation of FeO/Fe3O4 core-shell nanocubes to Fe3O4 via magnetic stimulation.

Here, we propose the use of magnetic hyperthermia as a means to trigger the oxidation of Fe1-xO/Fe3-δO4 core-shell nanocubes to Fe3-δO4 phase. As a first relevant consequence, the specific absorption rate (SAR) of the initial core-shell nanocubes doubles after exposure to 25 cycles of alternating magnetic field stimulation. The improved SAR value was attributed to a gradual transformation of the Fe1-xO core to Fe3-δO4, as evidenced by structural analysis including high resolution electron microscopy and Rietveld analysis of X-ray diffraction patterns. The magnetically oxidized nanocubes, having large and coherent Fe3-δO4 domains, reveal high saturation magnetization and behave superparamagnetically at room temperature. In comparison, the treatment of the same starting core-shell nanocubes by commonly used thermal annealing process renders a transformation to γ-Fe2O3. In contrast to other thermal annealing processes, the method here presented has the advantage of promoting the oxidation at a macroscopic temperature below 37 °C. Using this soft oxidation process, we demonstrate that biotin-functionalized core-shell nanocubes can undergo a mild self-oxidation transformation without losing their functional molecular binding activity.

Investigation of the electro-spinnability of alginate solutions containing gold precursor HAuCl4.

Alginate nanofibers with an average diameter of 75nm have been prepared by the electrospinning process. In addition, the spinnability of the solutions in the presence of the gold precursor HAuCl4 was investigated. At low concentrations of HAuCl4 well-formed nanofibers were produced, whereas as its concentration increases the nanofibrous mats present an increased number of bead-like defects. Herein, the in situ preparation of gold nanoparticles (Au NPs) is discussed since sodium alginate (SA) acts as the reducing agent and a mechanism is proposed in order to explain the bead-effect as well as the surface morphology of the alginate fibers decorated with Au NPs.

Toxicity assessment of silica coated iron oxide nanoparticles and biocompatibility improvement by surface engineering.

We have studied in vitro toxicity of iron oxide nanoparticles (NPs) coated with a thin silica shell (Fe3O4/SiO2 NPs) on A549 and HeLa cells. We compared bare and surface passivated Fe3O4/SiO2 NPs to evaluate the effects of the coating on the particle stability and toxicity. NPs cytotoxicity was investigated by cell viability, membrane integrity, mitochondrial membrane potential (MMP), reactive oxygen species (ROS) assays, and their genotoxicity by comet assay. Our results show that NPs surface passivation reduces the oxidative stress and alteration of iron homeostasis and, consequently, the overall toxicity, despite bare and passivated NPs show similar cell internalization efficiency. We found that the higher toxicity of bare NPs is due to their stronger in-situ degradation, with larger intracellular release of iron ions, as compared to surface passivated NPs. Our results indicate that surface engineering of Fe3O4/SiO2 NPs plays a key role in improving particles stability in biological environments reducing both cytotoxic and genotoxic effects.

Spatially controlled surface energy traps on superhydrophobic surfaces.

Water wetting and adhesion control on polymeric patterns are achieved by tuning the configuration of their surface's structural characteristics from single to dual and triple length-scale. In particular, surfaces with combined micro-, submicrometer-,and nanoroughness are developed, using photolithographically structured SU-8 micro-pillars as substrates for the consecutive spray deposition of polytetrafluoroethylene (PTFE) submicrometer particles and hydrophobically capped iron oxide colloidal nanoparticles. The PTFE particles alone or in combination with the nanoparticles render the SU-8 micropillars superhydrophobic. The water adhesion behaviour of the sprayed pillars is more complex since they can be tuned gradually from totally adhesive to completely non adhesive. The influence of the hierarchical geometrical features of the functionalized surfaces on this behaviour is discussed within the frame of the theory. Specially designed surfaces using the described technique are presented for selective drop deposition and evaporation. This simple method for liquid adhesion control on superhydrophobic surfaces can find various applications in the field of microfluidics, sensors, biotechnology, antifouling materials, etc.

Magnetically driven floating foams for the removal of oil contaminants from water.

In this study, we present a novel composite material based on commercially available polyurethane foams functionalized with colloidal superparamagnetic iron oxide nanoparticles and submicrometer polytetrafluoroethylene particles, which can efficiently separate oil from water. Untreated foam surfaces are inherently hydrophobic and oleophobic, but they can be rendered water-repellent and oil-absorbing by a solvent-free, electrostatic polytetrafluoroethylene particle deposition technique. It was found that combined functionalization of the polytetrafluoroethylene-treated foam surfaces with colloidal iron oxide nanoparticles significantly increases the speed of oil absorption. Detailed microscopic and wettability studies reveal that the combined effects of the surface morphology and of the chemistry of the functionalized foams greatly affect the oil-absorption dynamics. In particular, nanoparticle capping molecules are found to play a major role in this mechanism. In addition to the water-repellent and oil-absorbing capabilities, the functionalized foams exhibit also magnetic responsivity. Finally, due to their light weight, they float easily on water. Hence, by simply moving them around oil-polluted waters using a magnet, they can absorb the floating oil from the polluted regions, thereby purifying the water underneath. This low-cost process can easily be scaled up to clean large-area oil spills in water.

Screening ethnically diverse human embryonic stem cells identifies a chromosome 20 minimal amplicon conferring growth advantage.

The International Stem Cell Initiative analyzed 125 human embryonic stem (ES) cell lines and 11 induced pluripotent stem (iPS) cell lines, from 38 laboratories worldwide, for genetic changes occurring during culture. Most lines were analyzed at an early and late passage. Single-nucleotide polymorphism (SNP) analysis revealed that they included representatives of most major ethnic groups. Most lines remained karyotypically normal, but there was a progressive tendency to acquire changes on prolonged culture, commonly affecting chromosomes 1, 12, 17 and 20. DNA methylation patterns changed haphazardly with no link to time in culture. Structural variants, determined from the SNP arrays, also appeared sporadically. No common variants related to culture were observed on chromosomes 1, 12 and 17, but a minimal amplicon in chromosome 20q11.21, including three genes expressed in human ES cells, ID1, BCL2L1 and HM13, occurred in >20% of the lines. Of these genes, BCL2L1 is a strong candidate for driving culture adaptation of ES cells.

A role for NANOG in G1 to S transition in human embryonic stem cells through direct binding of CDK6 and CDC25A.

In this study, we show that NANOG, a master transcription factor, regulates S-phase entry in human embryonic stem cells (hESCs) via transcriptional regulation of cell cycle regulatory components. Chromatin immunoprecipitation combined with reporter-based transfection assays show that the C-terminal region of NANOG binds to the regulatory regions of CDK6 and CDC25A genes under normal physiological conditions. Decreased CDK6 and CDC25A expression in hESCs suggest that both CDK6 and CDC25A are involved in S-phase regulation. The effects of NANOG overexpression on S-phase regulation are mitigated by the down-regulation of CDK6 or CDC25A alone. Overexpression of CDK6 or CDC25A alone can rescue the impact of NANOG down-regulation on S-phase entry, suggesting that CDK6 and CDC25A are downstream cell cycle effectors of NANOG during the G1 to S transition.

Silencing of the expression of pluripotent driven-reporter genes stably transfected into human pluripotent cells.

AIMS & METHODS: Marking of human embryonic stem (ES) and embryonal carcinoma (EC) cells with pluripotent promoter-driven reporter gene cassettes provides an important tool for studies related to maintenance of pluripotency, cell differentiation and cell selection. OCT4, TERF1 and telomerase reverse transcriptase component (TERT) are considered as pluripotent marker genes since they are expressed in both human ES and EC cells and significantly downregulated during the differentiation process. Our aim was to use core promoter regions from such pluripotent genes to drive expression of reporter genes that would be suitable for human ES cell selection amongst differentiated cells. RESULTS: Human ES and EC cells were stably transfected with a number of TERT, OCT4 and TERF1 promoter-driven EGFP or NTR gene cassettes. Gradual loss of reporter gene expression was observed from 24 h post-transfection during transient transfection studies, while almost complete loss of reporter expression was observed upon stable transfections. The loss of reporter gene expression was partly reversed by addition of a histone deacetylase inhibitor and a demethylating agent, suggesting that in vitro methylation of these exogenous constructs and the epigenetic architecture around the site of integration are likely to play a major role in their transcriptional activity. Inclusion of gene-regulatory elements in addition to the core promoters has been shown to minimize such effects and should be considered as an important strategy in such studies. CONCLUSIONS: Together our data suggest that human ES and EC cells are able to silence pluripotent promoter-driven reporter genes with high efficiency. Whether differentiated cells derived from human ES and EC cells retain this activity is unknown and need to be investigated before large-scale comparative reporter-based transfection studies can be used as a tool in human embryonic stem cell biology.