Innovative Use of an Injectable, Self-Healing Drug-Loaded Pectin-Based Hydrogel for Micro- and Supermicro-Vascular Anastomoses.

Microvascular surgery plays a crucial role in reconnecting micrometer-scale vessel ends. Suturing remains the gold standard technique for small vessels; however, suturing the collapsed lumen of microvessels is challenging and time-consuming, with the risk of misplaced sutures leading to failure. Although multiple solutions have been reported, the emphasis has predominantly been on resolving challenges related to arteries rather than veins, and none has proven superior. In this study, we introduce an innovative solution to address these challenges through the development of an injectable lidocaine-loaded pectin hydrogel by using computational and experimental methods. To understand the extent of interactions between the drug and the pectin chain, molecular dynamics (MD) simulations and quantum mechanics (QM) calculations were conducted in the first step of the research. Then, a series of experimental studies were designed to prepare lidocaine-loaded injectable pectin-based hydrogels, and their characterization was performed by using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and rheological analysis. After all the results were evaluated, the drug-loaded pectin-based hydrogel exhibiting self-healing properties was selected as a potential candidate for in vivo studies to determine its performance during operation. In this context, the hydrogel was injected into the divided vessel ends and perivascular area, allowing for direct suturing through the gel matrix. While our hydrogel effectively prevented vasospasm and facilitated micro- and supermicro-vascular anastomoses, it was noted that it did not cause significant changes in late-stage imaging and histopathological analysis up to 6 months. We strongly believe that pectin-based hydrogel potentially enhanced microlevel arterial, lymphatic, and particularly venous anastomoses.

The assessment of groundwater quality through the water quality and nitrate pollution indexes in northern Türkiye.

Groundwater is contaminated by anthropogenic factors such as industry, domestic waste, and excessive fertilizers. Groundwater samples, which were obtained from 50 different wells in July 2020, were used in this study. Thirteen hydrochemical properties, including electrical conductivity (EC), pH, total dissolved solids (TDS), total hardness (TH), nitrate NO3-, anions, and cations were analyzed. Also, types of groundwater were investigated via the Piper diagram. The groundwater was also evaluated for irrigation suitability using the sodium percentage (Na%), sodium adsorption ratio (SAR), Kelly's index (KI), residual sodium carbonate (RSC), potential salinity, magnesium hazard (MR), and permeability index (PI). The samples were assessed for drinking the suitability using the water quality index (WQI) and the nitrate pollution index (NPI). Geographic information systems (GIS) were used to create spatial distribution maps of irrigation water quality indices, WQI, and NPI values. The results of major cations varied sodium 28.69-211.80 mg/L, calcium 78.74-258.89 magnesium 27.78-161.30 mg/L, and potasium 0.10-3.57 mg/L. The results from the study area showed that 62.70 of EC, 32.40% of PI, 20.09% of RSC, 51.55% of PS, and 49.36% of MR were inappropriate for irrigation purposes. The NPI data ranged from - 0.75 to 9.65, and 21.06% of the study areas were heavily polluted. The WQI showed that almost 62.90% of the experimental area was categorized as poor, very poor, and inappropriate for drinking water purposes, whereas 37.10% of the areas were categorized as good and excellent.

Short fiber reinforced composite on fracture strength of immature permanent anterior teeth with simulated regenerative endodontic procedures: an in vitro study.

The aim of the present study was to evaluate the effect of short fiber reinforced composite on the fracture strength of anterior immature teeth treated with regenerative endodontic procedures. A total of 120 permanent maxillary central incisors were selected, and root lengths were standardized. Except for the positive control group (n = 20), the root canals were instrumented to simulate immature teeth with incomplete root development, and the regenerative endodontic procedure was performed. Twenty instrumented teeth acted as negative controls (n = 20), and the remaining 80 teeth were randomly divided into 4 groups according to the chosen coronal restoration material: bulk fill, short fiber reinforced composite (SFRC), polyethylene fiber (Ribbond Ultra), and flowable composite resin. Each specimen was then subjected to fracture testing using a universal testing machine (AGS-X, Shimadzu, Japan). The load to fracture was recorded. Data were subjected to statistical analysis using analysis of variance and the Tukey Honestly Significant Difference test. A significant difference was detected between the groups (p < 0.05), with the positive control group showing the highest mean fracture strength. The SFRC group had significantly higher values than the bulk fill, polyethylene fiber, flowable composite resin and negative control groups. In conclusion, SFRC has a relatively high fracture strength compared to other materials used in regenerative endodontic procedures. The use of SFRC enhanced the fracture strength of immature permanent teeth.

Bullous scabies, the light shed on etiopathogenesis and treatment: report of five paediatric cases.

Introduction: Bullous scabies (BS) is an infrequent and atypical presentation of scabies, with a predilection for elderly males. The mechanism of BS is not fully understood; superinfection, friction due to pruritus, autoeczemation, direct injury from mite's lytic enzymes, cross-reactivity of scabies protein with basal membrane zone antigens are considered to be possible reasons. Aim: To define clinical features of paediatric BS cases, which is an extremely rare subtype of scabies. Material and methods: This is a retrospective study of paediatric BS cases seen at two tertiary care centres. Previously described bacterial culture, antibiogram and follow-up records were investigated retrospectively. Confirmed scabies cases, according to the "International Alliance for the Control of Scabies (IACS)" with bullae were included. All cases were treated with 10% sulfur ointment for 3 consecutive days, two cycles. Households of cases were also treated simultaneously. Systemic antibiotics were added to patients with elevated acute phase reactants according to the antibiogram results. Informed consent was obtained from patients' parents. Results: Five BS cases were included. Three cases were male, two cases were female. Four cases had staphylococcus aureus, one had group-A beta haemolytic streptococcus positive bullae culture. All cases achieved a rapid complete resolution of symptoms after topical 10% sulfur ointment. Conclusions: Paediatric BS is an extremely rare entity of scabies. Bacterial superinfection plays a key role in bullae formation. 10% sulfur ointment is a highly effective treatment option for paediatric BS.

Effectiveness of the static-guided endodontic technique for accessing the root canal through MTA and its effect on fracture strength.

OBJECTIVES: (1) To evaluate the effectiveness of the static-guided (SG) endodontics technique for accessing the root canal through the mineral trioxide aggregate (MTA) and (2) to evaluate the effect of this technique on the fracture strength of teeth. MATERIALS AND METHODS: Thirty mandibular premolars were used in the present study. After standard coronal access cavity preparation, root canals were prepared up to size #80 to simulate an immature root apex. White MTA was placed approximately 3 mm below the cementoenamel junction (CEJ), as placed in regenerative endodontic procedures. After the MTA had set, the cavity was restored with a resin composite material. The teeth were randomly divided into two groups (n = 15). In the control group, the composite resin and MTA were removed without any guide. In the SG-access group, a cone beam computed tomography (CBCT) scan was performed, 3D-printed guides were designed and fabricated, and then the composite resin and MTA were removed with a guide. One inexperienced operator performed the removal of the composite resin and MTA in all groups. Pre- and post-operative periapical radiographs were taken. The mishaps and time to penetration to root canal were recorded. After that, the root canals were filled, and the access cavities were restored. The samples were subjected to a fracture strength test. Data were analyzed using Mann-Whitney U, independent samples of T test, and chi-square tests at 95% confidence level (P = 0.05). RESULTS: There were significant differences between the control and SG-access groups in terms of mishaps and time to penetration to the root canal through the MTA barrier (P < 0.05). The SG-access group required the shorter time as compared with the control group. Mishaps did not occur in the SG-access group. The SG-access group exhibited the significantly preserved fracture resistance of the teeth as compared with the control group (P < 0.05). Non-restorable failure occurred more frequently in the control group than in the SG-access group. CONCLUSIONS: Within the limitations of the present study, the SG endodontic technique yielded favorable results with respect to time, mishaps, and fracture strength. CLINICAL RELEVANCE: The static-guided endodontics technique may provide advantages to the clinician for MTA removal.

Effect of calcium hydroxide mixed with lidocaine hydrochloride on postoperative pain in teeth with irreversible pulpitis and symptomatic apical periodontitis: a preliminary randomized controlled prospective clinical trial.

OBJECTIVES: To investigate the effect of calcium hydroxide mixed with lidocaine HCl on postoperative spontaneous pain. MATERIALS AND METHODS: Sixty patients having irreversible pulpitis and symptomatic apical periodontitis with a preoperative spontaneous pain and percussion pain which was more than 50 on a visual analogue scale (100 mm VAS) were included in this study. After the preparation of the root canals, the patients were randomly distributed into two groups according to the calcium hydroxide vehicle, control group (mixed with saline) and calcium hydroxide mixed with lidocaine HCl (n = 30). Postoperative spontaneous pain scores were recorded by a VAS every day for a week. Data were analysed using one-way analysis of variance, chi-squared test and Mann-Whitney U tests (p = 0.05). RESULTS: The calcium hydroxide mixed with lidocaine HCl group resulted in significantly less pain compared with the calcium hydroxide mixed with saline group during days 1 to 4 (p < 0.05). There were no significant differences between the groups in terms of postoperative percussion pain levels (p > 0.05). CONCLUSION: Within the limitations of this study, it can be concluded that the calcium hydroxide mixed with lidocaine HCl can be beneficial in reducing postoperative pain in teeth with irreversible pulpitis and symptomatic apical periodontitis. CLINICAL RELEVANCE: The calcium hydroxide mixed with lidocaine HCl can be beneficial in reducing postoperative pain in teeth with irreversible pulpitis and symptomatic apical periodontitis. CLINICAL REGISTRATION NUMBER: TCTR20181121003.

Comparison of Ischemic Preconditioning and Systemic Piracetam for Prevention of Ischemia-Reperfusion Injury in Musculocutaneous Flaps.

BACKGROUND: Ischemia-reperfusion injury plays an important role in flap failure. Ischemic preconditioning technique is the only proven method for preventing ischemia-reperfusion injury, but it is not used widely in daily practice because of difficulties such as prolonging the operation time, need for surgical experience, and increasing the risk of complications. This study has been performed with the assumption that piracetam may be a simple and inexpensive alternative to the preconditioning technique due to its antioxidant, antiaggregant, rheological, anti-inflammatory, antiapoptotic, cytoprotective, and immune modulating effects. METHODS: Thirty-two rats were divided into four groups and latissimus dorsi musculocutaneous flaps were raised. No extra procedure was applied, and no treatment was given to the control group. Four hours of ischemia was created by clamping the thoracodorsal pedicle in the second group. The animals in the third group were treated with 10 minutes of ischemia and reperfusion periods as a preconditioning procedure before the 4 hours of ischemia. Animals in the fourth group received systemic piracetam 30 minutes before and 6 days after reperfusion. Nitric oxide and myeloperoxidase levels in serum and tissue, acute inflammatory cell response, and vascular proliferation in tissue were examined at the postoperative 24th hour and 10th day. RESULTS: Myeloperoxidase activity in both preconditioning and piracetam groups, was significantly lower than the ischemia-reperfusion group. Acute inflammatory cell response was similarly decreased in both preconditioning and piracetam groups compared with ischemia-reperfusion group. Tissue measurements of nitric oxide were also significantly higher in both preconditioning and piracetam groups than in the ischemia-reperfusion group. However, vascular proliferation increased in the preconditioning group, while it did not show any significant change in the piracetam group. CONCLUSION: This study shows that systemic piracetam treatment provides protection against ischemia-reperfusion injury in musculocutaneous flaps and can offer a simple and inexpensive alternative to the preconditioning technique.

Duration of ultrasonic activation causing secondary fractures during the removal of the separated instruments with different tapers.

OBJECTIVES: The aim of the present study was to determine the effect of taper (.08, .06, and .04) of separated K3XF instruments on duration taken for the secondary fracture formation during ultrasonic activation. MATERIALS AND METHODS: Ten 25/.08 K3XF (SybronEndo, Orange, CA, USA), ten 25/.06 K3XF, and ten 25/.04 K3XF instruments were used for the study. The apical 5 mm of the instruments was cut to simulate the fragments in root canals. Fragments of the instruments were sandwiched between two straight dentin blocks. An ultrasonic tip was used to cause a secondary fracture of the fragment. The time needed for the secondary fracture was recorded for each instrument. The data were statistically analyzed using the Kruskal-Wallis H test (alpha = 0.05). RESULTS: Secondary fractures occurred in all instruments. In the .08 taper group, secondary fractures took longer than in the case of the .06 and the .04 taper groups (P < 0.05). There were no significant differences between the .06 and the .04 taper groups in terms of the time required for the occurrence of a secondary fracture (P > 0.05). CONCLUSIONS: In the .08 taper group, secondary fracture took longer time than in the case of the .06 and the .04 taper groups due to its larger cross-sectional area involved. CLINICAL RELEVANCE: Typically, when removing separated instruments, a much lower power setting is chosen. The purpose of this in vitro study was to determine which tapered files were more resilient to secondary fracture, thus allowing a higher power setting to be chosen. Thus, the results of the present study cannot be used in clinical practice. If the clinician knows the taper of the broken file, the clinician should be very careful with regard to secondary fractures when using ultrasonics to remove the separated smaller tapered instruments.

The effect of photobiomodulation on total amount of substance P in gingival crevicular fluid: placebo-controlled randomized clinical trial.

To investigate the effect of photobiomodulation (PBM) and placebo on total amount of substance P in gingival crevicular fluid (GCF) pre- and postoperatively. Twenty-six patients having tooth with symptomatic apical periodontitis were enrolled in this study. GCF was collected preoperatively. The patients were assigned into two groups (n = 13), as follows: placebo and PBM. Sampling was repeated 7 days after root canal treatment. Two independent samples T test was used for analyzing of the differences between preoperative and postoperative substance P levels in GCF (p = .05). The Pearson correlation analysis was used for determination of correlation among substance P levels and other variables. For placebo group, there is no significant difference between preoperative and postoperative total amounts of substance P level (p = 0.553). For PBM group, postoperative total amount of substance P level was significantly higher than those of preoperative level (p = 0.005). Within the limitation of the present study, PBM has immunomodulation effect linked to the modulation of the total amount of substance P in the gingival crevicular fluid. Thai Clinical Trials Registry: TCTR20161228002.

Effects of Insulin, Metoprolol and Deferoxamine on Fat Graft Survival.

BACKGROUND: The main problem faced with fat grafting is unpredictable resorption rates. Many substances have been reported to increase the survival of fat grafts. The aim of this study was to compare the effects of insulin, metoprolol and deferoxamine on fat graft survival. METHODS: Inguinal fat pads of male Sprague-Dawley rats were harvested and split into four parts as grafts. The grafts were placed in subcutaneous pockets in four quadrants on the back area of the rats. The insulin and metoprolol group fat grafts were incubated in regular insulin and metoprolol solutions, until they were placed. Deferoxamine and control group fat grafts were placed without incubation. After surgery, the control group fat grafts were injected with 10 doses of NaCl solution once every 3 days, and the deferoxamine group fat grafts were injected with 10 doses of deferoxamine solution once every 3 days. After a graft maturation period of 3 months, the grafts were harvested for weight measurements and histological and immunohistochemical evaluation. RESULTS: According to the rate of perilipin staining, the metoprolol group had 30% more mature viable adipocytes than the control and insulin group fat grafts (p < 0.05 and p < 0.01, respectively). CD31 activation rates were significantly higher in the deferoxamine and insulin group than in the metoprolol group (p < 0.05). CD34 staining rates did not differ between any groups (p > 0.05). CONCLUSIONS: In this experimental study, we have shown that there was no significantly increased fat graft survival rate seen in any drug treatment group. Low survival rates of stem cells demonstrated that the adipogenesis period ended at 3 months. Treatment of fat grafts with the selective ß1-blocker metoprolol resulted in good quality better graft take with more viable mature adipocytes. However, better viability of adipocytes did not result in increased weight of the fat graft. Studies aiming to compare the effects on fat graft survival of beta-blockers with long or short durations of action, different potencies and different receptor selectivity may be designed in the future. In addition, further studies may be performed, in which immunohistochemical markers used to assess inflammation and fibrosis are added to the study after the completion of the fat graft maturation period at the end of the first year to test the permanence of the results. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors - www.springer.com/00266 .

Ruthenium(η6,η¹-arene-CH2-NHC) Catalysts for Direct Arylation of 2-Phenylpyridine with (Hetero)Aryl Chlorides in Water.

A series of new benzimidazolium halides were synthesized in good yields as unsymmetrical N-heterocyclic carbene (NHC) precursors containing the N-CH2-arene group. The benzimidazolium halides were readily converted into ruthenium(II)-NHC complexes with the general formula [RuCl2(η6,η¹-arene-CH2-NHC)]. The structures of all new compounds were characterized by ¹H NMR (Nuclear Magnetic Resonance), 13C NMR, FT-IR (Fourier Transform Infrared) spectroscopy and elemental analysis techniques. The single crystal structure of one benzimidazole ruthenium complex, 2b, was determined. The complex is best thought of as containing an octahedrally coordinated Ru center with the arene residue occupying three sites, the remaining sites being occupied by a (carbene)C-Ru bond and two Ru-Cl bonds. The catalytic activity of [RuCl2(η6,η¹-arene-CH2-NHC)] complexes was evaluated in the direct (hetero)arylation of 2-phenylpyridine with (hetero)aryl chlorides in water as the nontoxic reaction medium. These results show that catalysts 2a and 2b were the best for monoarylation with simple phenyl and tolyl chlorides. For functional aryl chlorides, 2d, 2e, and 2c appeared to be the most efficient.

Effect of photon-initiated photoacoustic streaming, passive ultrasonic, and sonic irrigation techniques on dentinal tubule penetration of irrigation solution: a confocal microscopic study.

OBJECTIVES: The aim of this in vitro study was to evaluate the efficacy of different irrigation techniques including laser-activated irrigation using an erbium:yttrium-aluminum-garnet (Er:YAG) laser with a novel tip design (photon-induced photoacoustic streaming (PIPS)), Er:YAG laser with Preciso tip, sonic activation, and passive ultrasonic activation on the final irrigation solution penetration into dentinal tubules by using a laser scanning confocal microscope. MATERIAL AND METHODS: In this study, 65 extracted single-rooted human mandibular premolars were instrumented up to size 40 and randomly divided into 5 groups (n = 13) based on the activation technique of the final irrigation solution as follows: conventional irrigation (control group), sonic activation, passive ultrasonic activation, Er:YAG-PIPS tip activation, and Er:YAG-Preciso tip activation. In each group, 5 mL of 5% NaOCl labeled with fluorescent dye was used during the activation as the final irrigation solution. Specimens were sectioned at 2.5 and 8 mm from the apex and then examined under a confocal microscope to calculate the dentinal tubule penetration area. Data were analyzed using two-way analysis of variance (ANOVA) and Tukey's post hoc tests (P = 0.05). RESULTS: Both Er:YAG laser (Preciso/PIPS) activations exhibited a significantly higher penetration area than the other groups (P < 0.05). Additionally, passive ultrasonic activation had significantly higher penetration than the sonic activation group and the control group. Statistically significant differences were also found between each root canal third (coronal > middle > apical) (P < 0.001). CONCLUSIONS: The results from the present study support the use of Er:YAG laser activation (Preciso/PIPS) to improve the effectiveness of the final irrigation procedure by increasing the irrigant penetration area into the dentinal tubules. CLINICAL RELEVANCE: The activation of the irrigant and the creation of the streaming with the Er:YAG laser have a positive effect on the irrigant penetration.

The effect of various occlusal reduction levels on postoperative pain in teeth with symptomatic apical periodontitis using computerized analysis: a prospective, randomized, double-blind study.

OBJECTIVE: The objective of this study was to evaluate the effect of various occlusal reduction levels on the postoperative pain in teeth diagnosed as symptomatic apical periodontitis by using a computerized analysis system. MATERIALS AND METHODS: Thirty-nine molar teeth with symptomatic apical periodontitis were included. After the root canal preparation and filling was performed, the subjects were divided into three groups according to the level of occlusal reduction determined by using T-Scan (T-Scan III for Windows, Tekscan Inc., South Boston, MA) as follows: (1) no reduction (control), (2) semi-reduction, and (3) full-reduction groups. Preoperative and postoperative pain levels using visual analogue scale, percussion pain, and analgesic intake were recorded for each subject. The data were evaluated statistically using two-way analysis of variance and Holm-Sidak post hoc tests at a 95 % confidence level (P = 0.05). RESULTS: There was no significant difference between the groups in terms of occlusal reduction (P > 0.005). CONCLUSION: Within the limitation of the present study, there were no significant differences among the no reduction, semi-reduction, and full-reduction groups at 1, 3, 5, and 7 days in terms of postoperative pain levels. CLINICAL RELEVANCE: Occlusal reduction, determined using a computerized analysis system, did not influence the postoperative pain in teeth diagnosed as symptomatic apical periodontitis.

The New Anatomical Classification System for Orbital Exenteration Defect.

BACKGROUND: The unique anatomy of the orbita and the different behavior of each malignant tumor cause us to perform the various types of orbital exenteration that yields to varying defect each of which has own specific demands in terms of the reconstruction. Current classification of orbital exenteration defects seems not to be adequate to provide detailed description. This study reviews 50 exenteration defects to offer a more effective anatomical classification system. METHODS: Over a 15 years period, 50 orbital exenteration defects in 47 patients were reconstructed. Defects were categorized according to the resected orbital wall, dura, and ethmoid resection. If the maxillectomy was performed, A or B was added to define the type of maxillectomy as partial (intact palate) or total maxillectomy, respectively. According to these criteria, 4 types of defect patterns were determined including Type 0 (n = 5) with intact orbital wall, Type I (n = 9) with sino-orbital fistula, Type II (n = 4) with crania-orbital fistula with intact dura, Type III (n = 6) with crania-orbital fistula associated with dura defect, and Type IV (n = 8) with cranio-nasal-orbital fistula. There were 12 partial (A) and 6 total maxillectomy (B) defects along with the orbital exenteration. RESULTS: There was no major complication except one. The minor wound-healing problems occurred in 7 patients. Nine patients (19%) used prosthesis. Twenty-two (46.8%) patients chose a patch to cover the area. The remaining 16 patients were not able to use any type of prosthesis because of the reconstruction methods. CONCLUSION: The authors believe that the authors' anatomical classification system provides more precise description of the defect which eventually enhances the success rate of both reconstruction and resection.

The Effect of Diode Laser With Different Parameters on Root Fracture During Irrigation Procedure.

The aim of this study is to compare the effect of a single diode laser application and agitation of EDTA with diode laser with different parameters at different time intervals on root fracture. Ninety mandibular incisors were instrumented except the negative control group. The specimens were divided randomly into 10 groups according to final irrigation procedure: (G1) non-instrumented; (G2) distilled water; (G3) 15% EDTA; (G4) ultrasonically agitated EDTA; (G5) single 1.5W/100 Hz Diode laser; (G6) single 3W/100 Hz Diode laser; (G7) 1.5W/100 Hz Diode laser agitation of EDTA for 20 s; (G8) 1.5W/100 Hz Diode laser agitation of EDTA for 40 s; (G9) 3W/100 Hz Diode laser agitation of EDTA for 20 s; and (G10) 3W/100 Hz Diode laser agitation of EDTA for 40 s. The specimens were filled, mounted in acrylic resin, and compression strength test was performed on each specimen. Statistical analysis was carried out using one way ANOVA and Tukey's post hoc tests (P = 0.05). The statistical analysis revealed that there were statistically significant differences among the groups (P < 0.05). Laser-agitated irrigation with a 3W/100 Hz Diode laser for both 20 s and 40 s decreased the fracture resistance of teeth.

Dentinal tubule penetration of AH Plus, iRoot SP, MTA fillapex, and guttaflow bioseal root canal sealers after different final irrigation procedures: A confocal microscopic study.

BACKGROUND AND OBJECTIVE: Varied physical and chemical characteristic of root canal sealers and different irrigant agitation systems can influence the depth of penetration. The aim of this in vitro study was to use a laser scanning confocal microscope in order to assess the dentinal tubules penetration of various sealers after the application of different final irrigation techniques. STUDY DESIGN/MATERIALS AND METHODS: A total of 156 single-rooted extracted mandibular premolars were prepared up to size 40 and randomly distributed into four groups according to the sealer type (n = 39): AH Plus, iRoot SP, MTA Fillapex, and GF Bioseal. Each group was randomly subdivided into three groups according to the final irrigation protocol (n = 13): conventional needle irrigation (CI), photon-induced-photoacoustic streaming activation (PIPS), and passive ultrasonic irrigation (PUI). After the final irrigation procedures, the root canals were obturated with single gutta-percha and labeled sealer mixed with 0.1% fluorescent rhodamine B isothiocyanate. Specimens were sectioned at 2, 5, and 8 mm from the apex, and all the sections were examined under confocal microscope to calculate the dentinal tubule penetration area. Data were analyzed using three-way analysis of variance and Tukey's post hoc tests (P = 0.05). RESULTS: iRoot SP exhibited a significantly higher penetration area than the other groups (P < 0.001), although there were no statistically significant differences between AH Plus, MTA Fillapex, and GF Bioseal (P > 0.05). Er:YAG laser activation with PIPS and PUI had significantly higher penetration than CI (P < 0.001). Statistically significant differences were also determined at each root canal third (coronal > middle > apical; P < 0.001). CONCLUSIONS: The dentinal tubule penetration area was significantly affected by the selection of root canal sealer, final irrigation procedure, and root canal third. Use of iRoot with PIPS tip or PUI seems advantageous in dentinal tubule penetration.

Influence of ultrasonic and sonic activation of epoxy-amine resin-based sealer on penetration of sealer into lateral canals.

OBJECTIVES: The aim of this study was to evaluate the efficacy of sonic and ultrasonic activation of epoxy-amine resin-based root canal sealer (2Seal; VDW GmbH, München, Germany) on penetration of the sealer into lateral canals compared to non-activated filling. MATERIALS AND METHODS: Thirty-six single-rooted human anterior teeth were decoronated and prepared, using the ProTaper rotary system (Dentsply Maillefer, Ballaigues, Switzerland) to F4. After the completion of the clearing procedures, lateral canals were created at 2, 4, and 6 mm from the working length. The specimens were randomly divided into a control group (non-activated sealer application) and two experimental groups that received a sealer application with either sonic or ultrasonic activation. The root canals were filled using cold lateral compaction and images were obtained from each lateral canals at 40× magnification using a stereomicroscope. The sealer penetration was evaluated using a four-grade scoring system. The data were evaluated statistically using the Kruskal-Wallis and Mann-Whitney U tests with a 95 % confidence level (P = 0.05). RESULTS: The ultrasonic activation resulted in a better sealer penetration compared with the non-activated and sonically activated groups (P < 0.001). Sonic activation also resulted in better sealer penetration compared to the non-activated group (P < 0.001). CONCLUSIONS: The use of the ultrasonic activation of an epoxy-amine resin-based sealer promoted greater sealer penetration into the lateral canals. Sonic activation was not effective as ultrasonic activation, but was more effective than the non-activated group. CLINICAL RELEVANCE: The ultrasonic activation of an epoxy-amine resin-based sealer could be beneficial in filling procedures.

Effect of novel restorative materials and retention slots on fracture resistance of endodontically-treated teeth.

OBJECTIVES: The aim of this study was to evaluate the fracture resistance of endodontically-treated teeth restored with nano-hybrid composite resin, bulk-fill flowable and short fibre-reinforced-composite in the absence/presence of retention slots. MATERIALS AND METHODS: One hundred and ten extracted non-carious human mandibular molars received endodontic treatment followed by mesio-occlusodistal (MOD) cavities with 3 ± 0.2 mm thicknesses of buccal and lingual walls. Teeth were divided into two main groups according to the retention slot preparation. The dove-tail retention slots were prepared on the middle of opposite buccal and lingual walls to create mechanical interlocking. Each group was further divided into four sub-groups according to restorative material types: control (no restoration), nano-hybrid composite resin (Filtek™ Z550), bulk-fill flowable (Filtek™ Bulk Fill) and short fibre-reinforced-composite (everX Posterior™). Restored teeth were subjected to compressive load at a strain rate of 1 mm/min. The data were statistically analysed using two-way ANOVA and Tukey's test for multiple comparisons. RESULTS: The fracture resistance was significantly affected by the presence of the retentive slots and restorative material (p < 0.05). Restored teeth with retentive slots significantly increased the fracture resistance compared with restored teeth without retentive slots (p < 0.05). Short fibre-reinforced-composite with retentive slot cavities had significantly higher fracture resistance values compared with the other test groups (p < 0.05). CONCLUSIONS: The preparation of retention slots may increase the fracture resistance of endodontically-treated teeth, especially, when restored with short fibre-reinforced composite. The use of short fibre-reinforced composite with retentive slots could be an alternative technique to prevent cuspal fracture on endodontically-treated teeth with MOD cavity.

Effect of PIPS technique at different power settings on irrigating solution extrusion.

The aim of this study was to determine the effect of photon-induced photoacoustic streaming (PIPS) technique at different power settings on extrusion of irrigating solution. Root canal preparation was performed up to a #30 file on 64 extracted single-rooted mandibular premolar teeth, which were then divided into four groups. Each group was irrigated with one of the following irrigation methods: (a) irrigation with conventional irrigation open-ended needles, (b) continuous ultrasonic irrigation, (c) 0.3 W PIPS, or (d) 0.9 W PIPS. Apical extrusion of irrigating solution was evaluated using a modified model. The net weight of the extruded irrigating solution was measured for each group, and the resulting data were analysed statistically using Kruskal-Wallis at a 95 % confidence level (P < 0.05). Although the 0.9 W PIPS group resulted in the largest quantity of irrigation solution, the ultrasonic group was the smallest. However, the difference between these groups was not statistically significant at the 95 % level of confidence (P > 0.05). PIPS at both 0.3 W and 0.9 W resulted similar solution extrusion to the conventional irrigation or ultrasonic irrigation.