Nanodrawing of Aligned Single Carbon Nanotubes with a Nanopen.

Single-walled carbon nanotubes (SWCNTs) are considered pivotal components for molecular electronics. Techniques for SWCNT lithography today lack simplicity, flexibility, and speed of direct, oriented deposition at specific target locations. In this paper SWCNTs are directly drawn and placed with chemical identification and demonstrated orientation using fountain pen nanolithography (FPN) under ambient conditions. Placement across specific electrical contacts with such alignment is demonstrated and characterized. The fundamental basis of the drawing process with alignment has potential applications for other related systems such as inorganic nanotubes, polymers, and biological molecules.

Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes.

Carbon nanotube (CNTs) inks may provide an effective route for producing flexible electronic devices by digital printing. In this paper we report on the formulation of highly concentrated aqueous CNT inks and demonstrate the fabrication of flexible electroluminescent (EL) devices by inkjet printing combined with wet coating. We also report, for the first time, on the formation of flexible EL devices in which all the electrodes are formed by inkjet printing of low-cost multi-walled carbon nanotubes (MWCNTs). Several flexible EL devices were fabricated by using different materials for the production of back and counter electrodes: ITO/MWCNT and MWCNT/MWCNT. Transparent electrodes were obtained either by coating a thin layer of the CNTs or by inkjet printing a grid which is composed of empty cells surrounded by MWCNTs. It was found that the conductivity and transparency of the electrodes are mainly controlled by the MWCNT film thickness, and that the dominant factor in the luminance intensity is the transparency of the electrode.

Controlling adhesion properties of SWCNT-PET films prepared by wet deposition.

Due to their unique properties, carbon nanotubes (CNTs) have been used as thin electrodes in plastic optoelectronic devices. In many applications, it is required that CNT electrodes be transparent, conductive and flexible, and most importantly, mechanically stable with good adhesion to the polymeric substrate. In this paper, we report on achieving SWCNT transparent and conductive films with excellent adhesion to polyethylene terephthalate, without any binder, by a simple and rapid post-treatment process. It was found that the best adhesion was achieved upon treating the films with acetic acid and formic acid, and with solutions containing 1-70% HNO3. Morphological evaluations indicate the unique adhesion due to the SWCNT becoming partly embedded within the polymeric substrate during the post-treatment process, thus yielding flexible conductive films with high transparency.

Inkjet printing of flexible high-performance carbon nanotube transparent conductive films by "coffee ring effect".

Transparent and flexible conductors are a major component in many modern optoelectronic devices, such as touch screens for smart phones, displays, and solar cells. Carbon nanotubes (CNTs) offer a good alternative to commonly used conductive materials, such as metal oxides (e.g. ITO) for flexible electronics. The production of transparent conductive patterns, and arrays composed of connected CNT "coffee rings" on a flexible substrate poly(ethylene terephthalate), has been reported. Direct patterning is achieved by inkjet printing of an aqueous dispersion of CNTs, which self-assemble at the rim of evaporating droplets. After post-printing treatment with hot nitric acid, the obtained TCFs are characterized by a sheet resistance of 156 Ω sq(-1) and transparency of 81% (at 600 nm), which are the best reported values obtained by inkjet printing of conductive CNTs. This makes such films very promising as transparent conductors for various electronic devices, as demonstrated by using an electroluminescent device.

A dispersability study on poly(thiophen-3-yl-acetic acid) and PEDOT multi-walled carbon nanotube composites using an analytical centrifuge.

The present study investigated the influence of a covalently grown polythiophene (polyTh)-based adlayer on the N-methyl-2-pyrrolidone (NMP) dispersion of chemically modified multi-walled carbon nanotubes (MWCNTs). Poly(thiophen-3-yl-acetic acid) (PTAA), poly(ethylenedioxythiophene) (PEDOT), and PTAA/PEDOT co-polymer have been oxidatively grown from the surface of functional MWCNTs afforded corresponding polyTh(A)-, polyTh(B)-, and polyTh(A/B)-MWCNTs, respectively. To study and quantify the MWCNT particle sedimentation behavior of corresponding dispersion systems, an analytical centrifuge system was used. Comparison of dispersion quality of such polyTh-MWCNT composites with both commercial MWCNTs (COM-MWCNTs) and oxidized MWCNTs (polyCOOH-MWCNTs) was established. Analysis of sedimentation results combined with TGA, Elemental Analysis (EA), and Kaiser Test data showed that the COOH groups present on the surface of MWCNTs strongly promote the dispersability much beyond current sedimentation rate observed for COM-MWCNTs, - sedimentation rates were higher than 80% and below 2% for oxidized polyCOOH-MWCNTs. However, regarding MWCNTs coated with polyTh polymers in a core (MWCNT)-shell (polyTh) structure, outer functional groups are not the only influential factor for promoting high dispersion qualities. For these dual phase composite systems, the weight and thickness of polyTh-shell on the composite must be considered.