RESUMEN
We report a convergent and efficient total synthesis of the C-nor D-homo steroidal alkaloid (+)-heilonine with a hexacyclic ring system, nine stereocenters, and a trans-hydrindane moiety. Our synthesis features four selective C-H functionalizations to form key C-C bonds and stereocenters, a Stille carbonylative cross-coupling to connect the AB ring system with the DEF ring system, and a Nazarov cyclization to construct the five-membered C ring. These enabling transformations significantly reduced functional group manipulations and delivered (+)-heilonine in 11 or 13 longest linear sequence (LLS) steps.
RESUMEN
Dirhodium tetrakis(2,2'-binaphthylphosphate) catalysts were successfully developed for asymmetric C-H functionalization with trichloroethyl aryldiazoacetates as the carbene precursors. The 2,2'-binaphthylphosphate (BNP) ligands were modified by introduction of aryl and/or chloro functionality at the 4,4',6,6' positions. As the BNP ligands are C2-symmetric, the resulting dirhodium tetrakis(2,2'-binaphthylphosphate) complexes were expected to be D4-symmetric, but X-ray crystallographic and computational studies revealed this is not always the case because of internal T-shaped CH-π and aryl-aryl interactions between the ligands. The optimum catalyst is Rh2(S-megaBNP)4, with 3,5-di(tert-butyl)phenyl substituents at the 4,4' positions and chloro substituents at the 6,6' positions. This catalyst adopts a D4-symmetric arrangement and is ideally suited for site-selective C-H functionalization at unactivated tertiary sites with high levels of enantioselectivity, outperforming the best dirhodium tetracarboxylate catalyst developed for this reaction. The standard reactions were conducted with a catalyst loading of 1 mol % but lower catalyst loadings can be used if desired, as illustrated in the C-H functionalization of cyclohexane in 91% ee with 0.0025 mol % catalyst loading (29,400 turnover numbers). These studies further illustrate the effectiveness of donor/acceptor carbenes in site-selective intermolecular C-H functionalization and expand the toolbox of catalysts available for catalyst-controlled C-H functionalization.
RESUMEN
A cyclic thioenone system capable of controlled ring-opening polymerization (ROP) is presented that leverages a reversible Michael addition-elimination (MAE) mechanism. The cyclic thioenone monomers are easy to access and modify and for the first time incorporate the dynamic reversibility of MAE with chain-growth polymerization. This strategy features mild polymerization conditions, tunable functionalities, controlled molecular weights (Mn), and narrow dispersities. The obtained polythioenones exhibit excellent optical transparency and good mechanical properties and can be depolymerized to recover the original monomers. Density functional theory (DFT) calculations of model reactions offer insights into the role of monomer conformation in the polymerization process, as well as explaining divergent reactivity observed in seven-membered thiepane (TP) and eight-membered thiocane (TC) ring systems. Collectively, these findings demonstrate the feasibility of MAE mechanisms in ring-opening polymerization and provide important guidelines toward future monomer designs.
RESUMEN
There are several reports of compounds containing lanthanide ions in two different formal oxidation states; however, there are strikingly few examples of intervalence charge transfer (IVCT) transitions observed for these complexes, with those few occurrences limited to extended solids rather than molecular species. Herein, we report the synthesis, characterization, and computational analysis for a series of ytterbium complexes including a mixed-valence Yb25+ complex featuring a remarkably short Yb···Yb distance of 2.9507(8) Å. In contrast to recent reports of short Ln···Ln distances attributed to bonding through 5d orbitals, the formally Yb25+ complex presented here displays clear localization of Ln2+ and Ln3+ character and yet still displays an IVCT in the visible spectrum. These results demonstrate the ability to tune the electronic structure of formally mixed oxidation state lanthanide complexes: the high exchange stabilization of the Yb2+ 4f14 configuration disfavors the formation of a 5d1 bonding configuration, and the short metal-metal distance enforced by the ligand framework allows for the first observed lanthanide IVCT in a molecular system.
RESUMEN
Highly strained [3.2.1] bicyclic twisted amide 2 and corresponding amidium 10 were synthesized for the first time through Ag(I)-mediated halide abstraction. After initial lactamization attempts failed, a second-generation strategy was devised to target amidium 10 via intramolecular alkylation. The 3,4-dihydroisoquinolone cyclization precursor was regioselectively prepared via a Rh(III)-catalyzed C-H activation/annulation reaction. After Ag(I)-assisted cyclization, the [3.2.1] bicyclic framework of amidium 10 was confirmed by X-ray crystallography and enabled full solution characterization of twisted amide 2.
RESUMEN
cis-2-tert-Butyl-5-(tert-butylsulfonyl)-1,3-dioxane (cis-1) exhibits a high degree of eclipsing in the H-C5-S-C segment in the solid state, the origin of which remains unexplained. The eclipsed conformation that corresponds to an energetic minimum in the solid state practically corresponds to a rotational transition state in solution, which allows an approach to understand transitions states. The difference in the enthalpy of sublimation ΔsubH between cis-1 and the more stable trans-1 is 8.40 kcal mol-1, lets to consider that the intermolecular interactions in the crystalline structure must be responsible for the conformational effect observed in the solid state. The study of the experimental electron density of cis-1 in solid state allowed to establish that CHâ¯OîS intermolecular interaction is the main contribution to the observed eclipsing. The charge density analysis was also performed using the quantum theory of atoms in molecules to evaluate the nature and relevance of the intermolecular interactions in the crystal structure.
RESUMEN
Carbon-hydrogen (C-H) bonds have long been considered unreactive and are inert to traditional chemical reagents, yet new methods for the transformation of these bonds are continually being developed1-9. However, it is challenging to achieve such transformations in a highly selective manner, especially if the C-H bonds are unactivated10 or not adjacent to a directing group11-13. Catalyst-controlled site-selectivity-in which the inherent reactivities of the substrates14 can be overcome by choosing an appropriate catalyst-is an appealing concept, and substantial effort has been made towards catalyst-controlled C-H functionalization6,15-17, in particular methylene C-H bond functionalization. However, although several new methods have targeted these bonds in cyclic alkanes, the selectivity has been relatively poor18-20. Here we illustrate an additional level of sophistication in catalyst-controlled C-H functionalization, whereby unactivated cyclohexane derivatives can be desymmetrized in a highly site- and stereoselective manner through donor/acceptor carbene insertion. These studies demonstrate the potential of catalyst-controlled site-selectivity to govern which C-H bond will react, which could enable new strategies for the production of fine chemicals.
RESUMEN
Many quantum magnetic materials suffer from structural imperfections. The effects of structural disorder on bulk properties are difficult to assess systematically from a chemical perspective due to the complexities of chemical synthesis. The recently reported S = 1/2 kagome lattice antiferromagnet, (CH3NH3)2NaTi3F12, 1-Ti, with highly symmetric kagome layers and disordered interlayer methylammonium cations, shows no magnetic ordering down to 0.1 K. To study the impact of structural disorder in the titanium fluoride kagome compounds, (CH3NH3)2KTi3F12, 2-Ti, was prepared. It presents no detectable structural disorder and only a small degree of distortion of the kagome lattice. The methylammonium disorder model of 1-Ti and order in 2-Ti were confirmed by atomic-resolution transmission electron microscopy. The antiferromagnetic interactions and band structures of both compounds were calculated based on spin-polarized density functional theory and support the magnetic structure analysis. Three spin-glass-like (SGL) transitions were observed in 2-Ti at 0.5, 1.4, and 2.3 K, while a single SGL transition can be observed in 1-Ti at 0.8 K. The absolute values of the Curie-Weiss temperatures of both 1-Ti (-139.5(7) K) and 2-Ti (-83.5(7) K) are larger than the SGL transition temperatures, which is indicative of geometrically frustrated spin glass (GFSG) states. All the SGL transitions are quenched with an applied field >0.1 T, which indicates novel magnetic phases emerge under small applied magnetic fields. The well-defined structure and the lack of structural disorder in 2-Ti suggest that 2-Ti is an ideal model compound for studying GFSG states and the potential transitions between spin liquid and GFSG states.
RESUMEN
Dynamic covalent chemistry (DCvC) is a powerful means by which to rapidly prepare complex structures from simple molecular building blocks. Effective DCvC behavior is contingent upon the reversibility of covalent bond formation. Stabilized radical species, therefore, have been effectively used for these applications. In earlier work we demonstrated that properly substituted 1-arylurazolyl radicals showed promise as oxygen-insensitive heterocyclic N-centered radicals with a propensity for reversible bond formation. In this work we have synthesized several tethered bis(urazolyl) diradicals, varying by the type and length of connectivity between the urazole rings, and tested them for DCvC behavior. We have found that when the two aryl rings to which the urazolyl radical sites are attached are tethered by a chain of five or more carbons, equilibrium mixtures of monomeric and dimeric species are formed by N-N bond formation between two radical sites. DCvC behavior is observed that is sensitive to changes in temperature, concentration, and (to a lesser extent) solvent. In general, the dimer species is favored at lower temperatures and higher concentrations.
RESUMEN
Copper-selective ligands are essential tools for probing the affinity of cuproproteins or manipulating the cellular copper availability. They also harbor significant potential as antiangiogenic agents in cancer therapy or as therapeutics to combat copper toxicity in Wilson's disease. To achieve the high Cu(I) affinities required for competing effectively with cellular cuproproteins, we recently devised a ligand design based on phosphine-sulfide-stabilized phosphine (PSP) donor motifs. Building on this design strategy, we integrated two PSP donors within preorganized ligand architectures composed of either a hinged bithiophene backbone (bithipPS) or a single rigid thiophene bridge (thipPS). Extensive characterization based on X-ray crystal structures, solution NMR data, spectrophotometric titrations, and electrochemical studies established that bithipPS adapts well to the coordination preferences of Cu(I) to form a discrete air-stable mononuclear Cu(I) complex with a dissociation constant of 4 zM. In contrast, the wider bite angle of thipPS introduces some strain upon Cu(I) coordination to yield an almost 10-fold lower affinity with a Kd of 35 zM. As revealed by ICP-MS and two-photon excitation microscopy studies with the Cu(I)-selective fluorescent probe crisp-17, both ligands are effective at removing cellular copper from live mouse fibroblasts with rapid kinetics. Altogether, the stability and redox properties of PSP-ligand-Cu(I) complexes can be effectively tuned by judicious balancing of their geometrical preorganization and conformational flexibility.
Asunto(s)
Cobre , Tiofenos , Animales , Ratones , Cobre/química , Ligandos , Tiofenos/farmacología , Tiofenos/química , Espectroscopía de Resonancia Magnética , BiologíaRESUMEN
The development of high-valent transuranic chemistry requires robust methodologies to access and fully characterize reactive species. We have recently demonstrated that the reducing nature of imidophosphorane ligands supports the two-electron oxidation of U4+ to U6+ and established the use of this ligand to evaluate the inverse-trans-influence (ITI) in actinide metal-ligand multiple bond (MLMB) complexes. To extend this methodology and analysis to transuranic complexes, new small-scale synthetic strategies and lower-symmetry ligand derivatives are necessary to improve crystallinity and reduce crystallographic disorder. To this end, the synthesis of two new imidophosphorane ligands, [NâPtBu(pip)2]- (NPC1) and [NâPtBu(pyrr)2]- (NPC2) (pip = piperidinyl; pyrr = pyrrolidinyl), is presented, which break pseudo-C3 axes in the tetravalent complexes, U[NPC1]4 and U[NPC2]4. The reaction of these complexes with two-electron oxygen-atom-transfer reagents (N2O, trimethylamine N-oxide (TMAO) and 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene (dbabhNO)) yields the U6+ mono-oxo complexes U(O)[NPC1]4 and U(O)[NPC2]4. This methodology is optimized for direct translation to transuranic elements. Of the two ligands, the NPC2 framework is most suitable for facilitating detailed bonding analysis and assessment of the ITI. Theoretical evaluation of the U-(NPC) bonding confirms a substantial difference between axially and equatorially bonded N atoms, revealing markedly more covalent U-Nax interactions. The U 6d + 5f combined contribution for U-Nax is nearly double that of U-Neq, accounting for ITI shortening and increased bond order of the axial bond. Two distinct N-atom hybridizations in the pyrrolidine/piperidine rings are noted across the complexes, with approximate sp2 and sp3 configurations describing the slightly shorter P-N"planar" and slightly longer P-N"pyramidal" bonds, respectively. In all complexes, the NPC2 ligands feature more planar N atoms than NPC1, in accordance with a higher electron-donating capacity of the former.
RESUMEN
The synthesis of complex organic compounds usually relies on controlling the reactions of the functional groups. In recent years, it has become possible to carry out reactions directly on the C-H bonds, previously considered to be unreactive. One of the major challenges is to control the site-selectivity because most organic compounds have many similar C-H bonds. The most well developed procedures so far rely on the use of substrate control, in which the substrate has one inherently more reactive C-H bond or contains a directing group or the reaction is conducted intramolecularly so that a specific C-H bond is favoured. A more versatile but more challenging approach is to use catalysts to control which site in the substrate is functionalized. p450 enzymes exhibit C-H oxidation site-selectivity, in which the enzyme scaffold causes a specific C-H bond to be functionalized by placing it close to the iron-oxo haem complex. Several studies have aimed to emulate this enzymatic site-selectivity with designed transition-metal catalysts but it is difficult to achieve exceptionally high levels of site-selectivity. Recently, we reported a dirhodium catalyst for the site-selective functionalization of the most accessible non-activated (that is, not next to a functional group) secondary C-H bonds by means of rhodium-carbene-induced C-H insertion. Here we describe another dirhodium catalyst that has a very different reactivity profile. Instead of the secondary C-H bond, the new catalyst is capable of precise site-selectivity at the most accessible tertiary C-H bonds. Using this catalyst, we modify several natural products, including steroids and a vitamin E derivative, indicating the applicability of this method of synthesis to the late-stage functionalization of complex molecules. These studies show it is possible to achieve site-selectivity at different positions within a substrate simply by selecting the appropriate catalyst. We hope that this work will inspire the design of even more sophisticated catalysts, such that catalyst-controlled C-H functionalization becomes a broadly applied strategy for the synthesis of complex molecules.
Asunto(s)
Productos Biológicos/química , Carbono/química , Hidrógeno/química , Catálisis , Sistema Enzimático del Citocromo P-450/metabolismo , Enlace de Hidrógeno , Metano/análogos & derivados , Metano/química , Modelos Moleculares , Estructura Molecular , Rodio/química , Esteroides/química , Vitamina E/análogos & derivados , Vitamina E/químicaRESUMEN
BACKGROUND: Atopic dermatitis (AD) is a common skin condition with relatively few therapeutic alternatives. These include corticosteroids, which address inflammation but not superinfection, and Januse kinase (JAK) inhibitors, which have a US Food and Drug Administration (FDA) black box for potential carcinogenicity. METHODS: We demonstrate that S14, a synthetic derivative of ant venom-derived solenopsin, has potent anti inflammatory effects on the OVA murine model of atopic dermatitis. S14 has demonstrated prior activity in murine psoriasis and has the benefit of ceramide anti-inflammatory effects without being able to be metabolized into proinflammatory sphingosine-1 phosphate. RESULTS: The efficacy of S14 accompanied by the induction of IL-12 suggests a commonality in inflammatory skin disorders, and our results suggest that pharmacological ceramide restoration will be broadly effective for inflammatory skin disease. CONCLUSIONS: Solenopsin derivative S14 has anti-inflammatory effects in murine models of AD and psoriasis. This makes S14 a strong candidate for human use, and pre-IND studies are warranted.J Drugs Dermatol. 2023;22(10):1001-1006 doi:10.36849/JDD.7308.
Asunto(s)
Venenos de Hormiga , Dermatitis Atópica , Psoriasis , Humanos , Ratones , Animales , Dermatitis Atópica/tratamiento farmacológico , Venenos de Hormiga/uso terapéutico , Ceramidas/uso terapéutico , Psoriasis/tratamiento farmacológico , Antiinflamatorios/uso terapéuticoRESUMEN
The study of the redox chemistry of mid-actinides (U-Pu) has historically relied on cerium as a model, due to the accessibility of trivalent and tetravalent oxidation states for these ions. Recently, dramatic shifts of lanthanide 4+/3+ non-aqueous redox couples have been established within a homoleptic imidophosphorane ligand framework. Herein we extend the chemistry of the imidophosphorane ligand (NPC=[N=Pt Bu(pyrr)2 ]- ; pyrr=pyrrolidinyl) to tetrahomoleptic NPC complexes of neptunium and cerium (1-M, 2-M, M=Np, Ce) and present comparative structural, electrochemical, and theoretical studies of these complexes. Large cathodic shifts in the M4+/3+ (M=Ce, U, Np) couples underpin the stabilization of higher metal oxidation states owing to the strongly donating nature of the NPC ligands, providing access to the U5+/4+ , U6+/5+ , and to an unprecedented, well-behaved Np5+/4+ redox couple. The differences in the chemical redox properties of the U vs. Ce and Np complexes are rationalized based on their redox potentials, degree of structural rearrangement upon reduction/oxidation, relative molecular orbital energies, and orbital composition analyses employing density functional theory.
RESUMEN
1,3-Dimethyl-2,3-dihydrobenzo[d]imidazoles, 1H, and 1,1',3,3'-tetramethyl-2,2',3,3'-tetrahydro-2,2'-bibenzo[d]imidazoles, 12, are of interest as n-dopants for organic electron-transport materials. Salts of 2-(4-(dimethylamino)phenyl)-4,7-dimethoxy-, 2-cyclohexyl-4,7-dimethoxy-, and 2-(5-(dimethylamino)thiophen-2-yl)benzo[d]imidazolium (1g-i+, respectively) have been synthesized and reduced with NaBH4 to 1gH, 1hH, and 1iH, and with Na:Hg to 1g2 and 1h2. Their electrochemistry and reactivity were compared to those derived from 2-(4-(dimethylamino)phenyl)- (1b+) and 2-cyclohexylbenzo[d]imidazolium (1e+) salts. E(1+/1â¢) values for 2-aryl species are less reducing than for 2-alkyl analogues, i.e., the radicals are stabilized more by aryl groups than the cations, while 4,7-dimethoxy substitution leads to more reducing E(1+/1â¢) values, as well as cathodic shifts in E(12â¢+/12) and E(1Hâ¢+/1H) values. Both the use of 3,4-dimethoxy and 2-aryl substituents accelerates the reaction of the 1H species with PC61BM. Because 2-aryl groups stabilize radicals, 1b2 and 1g2 exhibit weaker bonds than 1e2 and 1h2 and thus react with 6,13-bis(triisopropylsilylethynyl)pentacene (VII) via a "cleavage-first" pathway, while 1e2 and 1h2 react only via "electron-transfer-first". 1h2 exhibits the most cathodic E(12â¢+/12) value of the dimers considered here and, therefore, reacts more rapidly than any of the other dimers with VII via "electron-transfer-first". Crystal structures show rather long central C-C bonds for 1b2 (1.5899(11) and 1.6194(8) Å) and 1h2 (1.6299(13) Å).
RESUMEN
Leveraging congested catalyst scaffolds has emerged as a key strategy for altering innate substrate site-selectivity profiles in C-H functionalization reactions. Similar to enzyme active sites, optimal small molecule catalysts often feature reactive cavities tailored for controlling substrate approach trajectories. However, relating three-dimensional catalyst shape to reaction output remains a formidable challenge, in part due to the lack of molecular features capable of succinctly describing complex reactive site topologies in terms of numerical inputs for machine learning applications. Herein, we present a new set of descriptors, "Spatial Molding for Approachable Rigid Targets" (SMART), which we have applied to quantify reactive site spatial constraints for an expansive library of dirhodium catalysts and to predict site-selectivity for C-H functionalization of 1-bromo-4-pentylbenzene via donor/acceptor carbene intermediates. Optimal site-selectivity for the terminal methylene position was obtained with Rh2(S-2-Cl-5-MesTPCP)4 (30.9:1 rr, 14:1 dr, 87% ee), while C-H functionalization at the electronically activated benzylic site was increasingly favored for Rh2(TPCP)4 catalysts lacking an ortho-Cl, Rh2(S-PTAD)4, and Rh2(S-TCPTAD)4, respectively. Intuitive global site-selectivity models for 25 disparate dirhodium catalysts were developed via multivariate linear regression to explicitly assess the contributing roles of steric congestion and dirhodium-carbene electrophilicity in controlling the site of C-H functionalization. The workflow utilizes spatial classification to extract descriptors only for reactive catalyst conformers, a nuance that may be widely applicable for establishing close correspondence between ground-state model systems and transition states. Broader still, SMART descriptors are amenable for delineating salient reactive site features to predict reactivity in other chemical and biological contexts.
Asunto(s)
Complejos de Coordinación/química , Rodio/química , Carbono/química , Catálisis , Hidrógeno/química , Cinética , Metano/análogos & derivados , Metano/química , Estereoisomerismo , TermodinámicaRESUMEN
An (N-heterocyclic carbene)nickel(I) cation precursor reacts with the corresponding nickel(0) complex to form a dinickel(I,0) monocation. The Ni···Ni distance in this cation is 0.93 Å shorter than in the analogous dinickel(0) complex. Although the solid-state structure shows equivalent Ni centers, density functional theory calculations indicate significant electronic localization. Reactions with CO and NO form mononuclear carbonyl and nitrosyl complexes. Oxidative addition of an aryl bromide results in C-arylation of the carbene ligands.
Asunto(s)
Electrones , Níquel , Bromuros , Metano/análogos & derivados , Estructura Molecular , Níquel/químicaRESUMEN
Mixed 3d metal oxides are some of the most promising water oxidation catalysts (WOCs), but it is very difficult to know the locations and percent occupancies of different 3d metals in these heterogeneous catalysts. Without such information, it is hard to quantify catalysis, stability, and other properties of the WOC as a function of the catalyst active site structure. This study combines the site selective synthesis of a homogeneous WOC with two adjacent 3d metals, [Co2Ni2(PW9O34)2]10- (Co2Ni2P2) as a tractable molecular model for CoNi oxide, with the use of multiwavelength synchrotron X-radiation anomalous dispersion scattering (synchrotron XRAS) that quantifies both the location and percent occupancy of Co (â¼97% outer-central-belt positions only) and Ni (â¼97% inner-central-belt positions only) in Co2Ni2P2. This mixed-3d-metal complex catalyzes water oxidation an order of magnitude faster than its isostructural analogue, [Co4(PW9O34)2]10- (Co4P2). Four independent and complementary lines of evidence confirm that Co2Ni2P2 and Co4P2 are the principal WOCs and that Co2+(aq) is not. Density functional theory (DFT) studies revealed that Co4P2 and Co2Ni2P2 have similar frontier orbitals, while stopped-flow kinetic studies and DFT calculations indicate that water oxidation by both complexes follows analogous multistep mechanisms, including likely Co-OOH formation, with the energetics of most steps being lower for Co2Ni2P2 than for Co4P2. Synchrotron XRAS should be generally applicable to active-site-structure-reactivity studies of multi-metal heterogeneous and homogeneous catalysts.
RESUMEN
The laboratory synthesis of complex organic molecules relies heavily on the introduction and manipulation of functional groups, such as carbon-oxygen or carbon-halogen bonds; carbon-hydrogen bonds are far less reactive and harder to functionalize selectively. The idea of C-H functionalization, in which C-H bonds are modified at will instead of the functional groups, represents a paradigm shift in the standard logic of organic synthesis. For this approach to be generally useful, effective strategies for site-selective C-H functionalization need to be developed. The most practical solutions to the site-selectivity problem rely on either intramolecular reactions or the use of directing groups within the substrate. A challenging, but potentially more flexible approach, would be to use catalyst control to determine which site in a particular substrate would be functionalized. Here we describe the use of dirhodium catalysts to achieve highly site-selective, diastereoselective and enantioselective C-H functionalization of n-alkanes and terminally substituted n-alkyl compounds. The reactions proceed in high yield, and functional groups such as halides, silanes and esters are compatible with this chemistry. These studies demonstrate that high site selectivity is possible in C-H functionalization reactions without the need for a directing or anchoring group present in the molecule.
RESUMEN
Whilst allowing for easy access to synthetically versatile motifs and for modification of bioactive molecules, the chemoselective benzylic oxidation reactions of functionalized alkyl arenes remain challenging. Reported in this study is a new non-heme Mn catalyst stabilized by a bipiperidine-based tetradentate ligand, which enables methylene oxidation of benzylic compounds by H2 O2 , showing high activity and excellent chemoselectivity under mild conditions. The protocol tolerates an unprecedentedly wide range of functional groups, including carboxylic acid and derivatives, ketone, cyano, azide, acetate, sulfonate, alkyne, amino acid, and amine units, thus providing a low-cost, more sustainable and robust pathway for the facile synthesis of ketones, increase of complexity of organic molecules, and late-stage modification of drugs.