RESUMEN
AIM: To investigate the surface morphology and electrochemical potential of superelastic (SE), M-Wire (MW) and shape memory technology (SMT) NiTi instruments before and after single clinical use in vivo. METHODOLOGY: A total of 60 ProTaper Universal F2 (PTU-SE), ProTaper Next X2 (PTN-MW), Typhoon (TYP), Hyflex (HF) and Vortex Blue (VB), the last three SMT, and size 25, .06 taper (n = 6 of each type) files were examined. Scanning electron microscopy (SEM), X-ray energy-dispersive spectroscopy (EDS) and electrochemical potential analysis were employed before and after clinical use. Statistical analysis was performed with one-way analysis of variance and Bonferroni's post hoc test. Significance was determined at the 95% confidence level for both tests. RESULTS: SEM observations of new instruments indicated the presence of marks left by the machining process during manufacturing and EDS revealed the existence of an oxide coating on shape memory instruments. After clinical use, the five types were associated with propagation of transverse cracks 3 mm from the tip. The surface oxide layer of TYP, HF and VB instruments had microcracks in multiple directions, whilst TYP and HF had fragmentation in chip form of the oxide layer. EDS analysis demonstrated a significant reduction of the oxide layer in shape memory instruments, except for VB. Electrochemical potentials were higher for shape memory instruments than for M-Wire and superelastic NiTi instruments, respectively (P < 0.05). CONCLUSIONS: It appears that shape memory technology NiTi instruments have a dysfunctional oxide layer after clinical use. Additionally, they featured higher electrochemical potential relative to NiTi instruments manufactured from M-Wire, and conventional superelastic NiTi alloy.
Asunto(s)
Aleaciones , Tratamiento del Conducto Radicular/instrumentación , Aleaciones/uso terapéutico , Electroquímica , Humanos , Microscopía Electrónica de Rastreo , Espectrometría por Rayos X , Propiedades de SuperficieRESUMEN
AIM: To validate torsional analysis, based on finite elements, of WaveOne instruments against in vitro tests and to model the effects of different nickel-titanium (NiTi) materials. METHODOLOGY: WaveOne reciprocating instruments (Small, Primary and Large, n = 8 each, M-Wire) were tested under torsion according to standard ISO 3630-1. Torsional profiles including torque and angle at fracture were determined. Test conditions were reproduced through Finite Element Analysis (FEA) simulations based on micro-CT scans at 10-µm resolution; results were compared to experimental data using analysis of variance and two-sided one sample t-tests. The same simulation was performed on virtual instruments with identical geometry and load condition, based on M-Wire or conventional NiTi alloy. RESULTS: Torsional profiles from FEA simulations were in significant agreement with the in vitro results. Therefore, the models developed in this study were accurate and able to provide reliable simulation of the torsional performance. Stock NiTi files under torsional tests had up to 44.9%, 44.9% and 44.1% less flexibility than virtual M-Wire files at small deflections for Small, Primary and Large instruments, respectively. As deflection levels increased, the differences in flexibility between the two sets of simulated instruments decreased until fracture. Stock NiTi instruments had a torsional fracture resistance up to 10.3%, 8.0% and 7.4% lower than the M-Wire instruments, for the Small, Primary and Large file, respectively. CONCLUSION: M-Wire instruments benefitted primarily through higher material flexibility while still at low deflection levels, compared with conventional NiTi alloy. At fracture, the instruments did not take complete advantage of the enhanced fractural resistance of the M-Wire material, which determines only limited improvements of the torsional performance.
Asunto(s)
Análisis de Elementos Finitos , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Diseño de Equipo , Humanos , Técnicas In Vitro , Ensayo de Materiales , Torsión Mecánica , Microtomografía por Rayos XRESUMEN
AIM: To assess and compare the flexibility and torsional resistance of PathFile, RaCe ISO 10 and Scout RaCe instruments in relation to stainless steel K-File hand instruments. METHODOLOGY: Rotary PathFile (sizes 13, 16 and 19; .02 taper), Race ISO 10 (size 10; 0.02, 0.04 and 0.06 tapers), Scout RaCe (sizes 10, 15 and 20; 0.02 taper) and hand K-File (sizes 10, 15 and 20; 0.02 taper) instruments were evaluated. Alloy chemical composition, phases present and transformation temperatures were determined for the NiTi instruments. For all instruments, diameters at each millimetre from the tip as well as cross-sectional areas at 3 mm from the tip were measured based on ANSI/ADA Specification No. 101 using image analysis software. Resistance to bending and torsional resistance were determined according to specification ISO 3630-1. Vickers microhardness measurements were also taken in all instruments to assess their strength. Data were analysed using analysis of variance (α = 0.05). RESULTS: The alloys used in the manufacture of the three types of NiTi instruments had approximately the same chemical composition, but the PathFile instruments had a higher Af transformation temperature and contained a small amount of B19' martensite. All instruments had diameter values within the standard tolerance. The bending and torsional resistance values were significantly increased relative to the instrument diameter and cross-sectional area. CONCLUSIONS: PathFile instruments were the most flexible and the least torque resistant, whilst the stainless steel instruments were the least flexible although they were more torque resistant than the NiTi instruments.
Asunto(s)
Instrumentos Dentales , Análisis de Falla de Equipo , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Aleaciones Dentales/química , Diseño de Equipo , Ensayo de Materiales , Docilidad , Espectrometría por Rayos X , Acero Inoxidable/química , TorqueRESUMEN
AIM: To investigate the influence of cyclic flexural and torsional loading on the flexibility of ProTaper Universal, K3 and EndoSequence nickel-titanium instruments, in view of the hypothesis that these types of loading would decrease the flexibility of the selected NiTi rotary files. METHODOLOGY: The instruments evaluated were S2 and F1 ProTaper Universal, sizes 20 and 25, .06 taper K3, and sizes 20 and 25, .06 taper EndoSequence. Flexibility was determined by 45° bending tests according to ISO 3630-1 specification. Values of the bending moment (MB ) obtained with new instruments were considered as the control group (CG). Bending tests were then conducted in instruments previously fatigued to one-fourth and three-fourths of their average fatigue life (fatigue groups, FG» and FG¾), as well as after cyclic torsional loading (torsional group, TG). Fatigue tests were carried out in a bench device that allowed the files to rotate freely inside an artificial canal with an angle of curvature of 45° and a radius of 5 mm. Cyclic torsional loading tests were performed that entailed rotating the instrument from zero angular deflection to 180° and then returning to zero applied torque in 20 cycles. Data were analysed using one-way analysis of variance at a significance level of 5%. RESULTS: Simulated clinical use by means of flexural fatigue tests did not affect the flexibility of the instruments, except for a significant increase in flexibility observed in a few instruments (P < 0.05). In addition, comparative statistical analyses between the values of MB measured in new instruments and after cyclic torsional loading showed no significant differences between them (P > 0.05). CONCLUSIONS: The flexibility of rotary ProTaper Universal, K3 and EndoSequence NiTi instruments, measured in bending tests, was not adversely affected by simulated clinical use in curved root canals.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Diseño de Equipo , Humanos , Ensayo de Materiales , Docilidad , Rotación , Estrés Mecánico , Torque , Torsión MecánicaRESUMEN
AIM: To compare the flexibility, torsional resistance and structural and dimensional characteristics of instruments produced by twisting with those of a geometrically similar nickel-titanium (NiTi) system produced by a grinding process. METHODOLOGY: The mean diameters along the flute and the pitch length of size 25, .04 taper, size 25, .06 taper, and size 25, .08 taper Twisted File (TF) (SybronEndo, Orange, CA, USA), and size 25, .04 taper, and size 25, .06 taper RaCe instruments (FKG, La Chaux-de-Fonds, Switzerland) (n = 10 each) were measured according to ANSI/ADA specification No. 101. Two pairs of instruments were found to have similar diameters at 3 mm from the tip: TF size 25, .06 taper and RaCe size 25, .04 taper, and TF size 25, .08 taper and RaCe size 25, .06 taper. The cross-sectional areas at 3 mm from the tip were determined. These instruments were then submitted to energy-dispersive X-ray spectroscopy, X-ray diffraction, differential scanning calorimetry (DSC), and Vickers microhardness measurements. Bending moment at 45° and maximum torque at fracture were measured (n = 10) according to specification ISO 3630-1. Data were analysed using analysis of variance (α = 0.05). RESULTS: The two types of instruments had approximately the same chemical composition, phase constitution, and austenite finishing temperatures. TF instruments had significantly (P ≤ 0.001) lower Vickers microhardness values and were more flexible than RaCe instruments (P = 0.016), but had similar (TF size 25, .08 taper and RaCe size 25, .06 taper, P = 0.916) or significantly higher (TF size 25, .06 taper and RaCe size 25, .04 taper, P ≤ 0.001) torsional resistance. CONCLUSIONS: Comparison of TF and RaCe instruments of similar measured dimensions revealed that the different manufacturing methods employed for producing these instruments gave rise to different mechanical behaviours.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Rastreo Diferencial de Calorimetría , Elasticidad , Diseño de Equipo , Dureza , Humanos , Ensayo de Materiales , Fenómenos Mecánicos , Fenómenos Físicos , Docilidad , Espectrometría por Rayos X , Propiedades de Superficie , Torque , Torsión Mecánica , Difracción de Rayos XRESUMEN
AIM: To compare physical and mechanical properties of one conventional and one thermomechanically treated nickel-titanium (NiTi) wire used to manufacture rotary endodontic instruments. METHODOLOGY: Two NiTi wires 1.0 mm in diameter were characterized; one of them, C-wire (CW), was processed in the conventional manner, and the other, termed M-Wire (MW), received an additional heat treatment according to the manufacturer. Chemical composition was determined by energy-dispersive X-ray spectroscopy, phase constitution by XRD and the transformation temperatures by DSC. Tensile loading/unloading tests and Vickers microhardness measurements were performed to assess the mechanical behaviour. Data were analysed using analysis of variance (α = 0.05). RESULTS: The two wires showed approximately the same chemical composition, close to the 1 : 1 atomic ratio, and the ß-phase was the predominant phase present. B19' martensite and the R-phase were found in MW, in agreement with the higher transformation temperatures found in this wire compared with CW, whose transformation temperatures were below room temperature. Average Vickers microhardness values were similar for MW and CW (P = 0.91). The stress at the transformation plateau in the tensile load-unload curves was lower and more uniform in the M-Wire, which also showed the smallest stress hysteresis and apparent elastic modulus. CONCLUSIONS: The M-Wire had physical and mechanical properties that can render endodontic instruments more flexible and fatigue resistant than those made with conventionally processed NiTi wires.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Rastreo Diferencial de Calorimetría , Fenómenos Químicos , Módulo de Elasticidad , Diseño de Equipo , Dureza , Humanos , Ensayo de Materiales , Fenómenos Mecánicos , Transición de Fase , Docilidad , Rotación , Espectrometría por Rayos X , Propiedades de Superficie , Resistencia a la Tracción , Termodinámica , Temperatura de Transición , Difracción de Rayos XRESUMEN
AIM: To assess the dimensional characteristics, flexibility and torsional behaviour of nickel-titanium retreatment instruments. METHODOLOGY: Using image analysis software and high-resolution digital images, the instrument length, tip angle, diameter at 3 mm from the tip and the distance between the blades (pitch length) of the following eight instruments were measured (n = 12 for each measurement parameter): the ProTaper Universal retreatment (PTU-R) D1, D2 and D3 instruments; the R-Endo R1, R2 and R3 retreatment instruments; and the Mtwo retreatment (Mtwo-R) sizes 25 and 15 retreatment instruments. Maximum torque and the angular deflection at fracture as well as the bending moment at 45° were measured (n = 12) according to the International Standards Organisation (ISO) specification number 3630-1. Data were analysed using the analysis of variance (α = 0.05). RESULTS: The length of the active part of the instruments was found to vary according to the depth of the canal into which they were designed to reach. The pitch length also increased along the active length. The PTU-R D1 and the Mtwo-R instruments had active tips. Measurements of the bending moment at 45° revealed that the Mtwo-R 15 instrument was the most flexible, whereas the PTU-R D1 was the least flexible. The maximum torque tended to increase as the instrument diameter at 3 mm from the tip increased, whereas the angular deflection at fracture varied in the opposite direction. CONCLUSIONS: The geometrical characteristics of the retreatment instruments and their flexibility and torsion behaviour were consistent with their intended clinical application.
Asunto(s)
Aleaciones Dentales , Instrumentos Dentales , Análisis del Estrés Dental , Níquel , Preparación del Conducto Radicular/instrumentación , Titanio , Diseño de Equipo , Docilidad , Retratamiento , Torsión MecánicaRESUMEN
AIM: To assess the influence of multiple clinical uses on the torsional behaviour of ProTaper Universal rotary NiTi instruments. METHODOLOGY: Root canal treatments were performed on patients using the ProTaper Universal rotary system to prepare canals. Ten sets of instruments were used by an experienced endodontist, each set being used in five molar teeth. After clinical use, S1, S2, F1 and F2 instruments were analysed for damage by optical and scanning electron microscopy. The used sets, along with a control group of 10 sets of new instruments, were then torsion tested based on the ISO 3630-1 specification. Data obtained were subjected to a one-way analysis of variance (anova) with alpha = 0.05. RESULTS: The use of the ProTaper Universal rotary instruments by an experienced endodontist allowed for the cleaning and shaping of the root canal system of five molar teeth without fracture. The maximum torque for instruments S2, F1 and F2, and the angular deflection at fracture for instruments S2 and F1 were significantly lower following clinical use. The largest decrease in maximum torque was 18.6% (P = 0.014) for S2 instruments. The same maximum percent decrease was found for angular deflection at fracture for F1 instruments (P = 0.009). CONCLUSIONS: Torsional resistance and angular deflection of used instruments, as compared to that of new instruments, were reduced following clinical use.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Análisis del Estrés Dental/instrumentación , Ácido Edético/uso terapéutico , Falla de Equipo , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Peróxidos/uso terapéutico , Irrigantes del Conducto Radicular/uso terapéutico , Preparación del Conducto Radicular/métodos , Rotación , Hipoclorito de Sodio/uso terapéutico , Esterilización/métodos , Estrés Mecánico , Propiedades de Superficie , Torque , Torsión Mecánica , Urea/uso terapéutico , Ceras/uso terapéuticoRESUMEN
AIM: To evaluate the influence of cyclic torsional loading on the flexural fatigue resistance and torsional properties of rotary NiTi instruments. METHODOLOGY: Twelve sets of new K3 instruments, sizes 20, 25 and 30 with an 0.04 taper, and sizes 20 and 25 with an 0.06 taper, were torsion tested until rupture, to establish their mean values of maximum torque and angular deflection. Twelve new K3 instruments of each of the following dimensions, size 30, 0.04 taper and sizes 20 and 25 with 0.06 taper, were tested to failure by rotation bending in a fatigue test device. Cyclic torsional loading was performed in 20 cycles from zero angular deflection to 180 degrees and then return to zero applied torque. After cyclic loading, the same number of instruments were tested until rupture in torsion and flexural fatigue. Data obtained were subjected to a one way analysis of variance (anova) at 95% confidence level. RESULTS: Cyclic torsional loading caused no significant differences in maximum torque or in maximum angular deflection of the instruments analysed, but comparative statistical analysis between measured NCF values of new and previously cycled K3 instruments showed significant differences for all tested instrument. Longitudinal cracks, that is, cracks apparently parallel to the long axis of the instruments cycled in torsion was observed. CONCLUSIONS: Cyclic torsional loading experiments in new K3 rotary endodontic instruments showed that torsional fatigue decreased the resistance of these instruments to flexural fatigue, although it did not affect their torsional resistance.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Torsión Mecánica , Diseño de Equipo , Falla de Equipo , Humanos , Ensayo de Materiales , Docilidad , Estrés Mecánico , Propiedades de Superficie , TorqueRESUMEN
AIM: To correlate the mechanical behaviour in torsion, bending and fatigue tests of K3 instruments with their dimensional characteristics. METHODOLOGY: Instrument length, tip angle, distance between blades (pitch length) and the diameter at each millimetre from the tip of sizes 20, 25 and 30, 0.04 taper and sizes 20 and 25, 0.06 taper K3 rotary instruments were measured in an optical microscope equipped with digital micrometers. The cross-sectional area at 3 mm from the tip of the same instruments was determined using digital image analysis of scanning electron microscopy images. Maximum torque and angular deflection, as well as bending moment at 45 degrees were measured according to specification of ISO 3630-1. Fatigue resistance of instruments size 30, 0.04 taper, and sizes 20 and 25, 0.06 taper was determined in a fatigue test bench device. RESULTS: The analysed instruments presented no uniformity in the distance between adjacent blades, but the measured diameters at each millimetre from the tip were regular, showing compliance with manufacturing standards. Torque and bending moment of the tested instruments increased significantly with diameter and cross-sectional area at 3 mm from the instrument tip. The fatigue resistance of the instruments showed a tendency to decrease as the diameter of the instruments increased. CONCLUSIONS: The bending moment at 45 degrees and the torsional resistance of K3 instruments can be predicted using instrument diameter and cross-sectional area at 3 mm from the tip. Fatigue resistance decreased as the instrument diameter increased.
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular/instrumentación , Análisis de Varianza , Aleaciones Dentales , Análisis del Estrés Dental , Elasticidad , Diseño de Equipo , Falla de Equipo , Níquel , Docilidad , Titanio , TorqueRESUMEN
AIM: To examine the influence of clinical use on the occurrence of deformation and fracture and on the fatigue resistance of ProTaper rotary instruments. METHODOLOGY: Root canal treatments were performed on patients using the ProTaper rotary system. Ten sets of instruments were used by an experienced endodontist, each set in five molars. Another 10 sets of instruments were used by the same operator, each set in eight molars. In addition, 10 sets of instruments were used, each set in five molars, by undergraduate students with no clinical experience with the system. After clinical use, S1, S2, F1 and F2 instruments were analysed for damage by optical and scanning electron microscopy. The used sets, along with a control group of 12 sets of new instruments, were then tested in a bench device for fatigue resistance. RESULTS: The use of the ProTaper rotary instruments by an experienced endodontist allowed for the cleaning and shaping of the root canal system of up to eight molars without fracture. During the students work, six instruments fractured. Fatigue resistance decreased upon clinical use for all instruments analysed. CONCLUSIONS: Fatigue resistance of used instruments was reduced, but no significant change was observed amongst the instruments used for shaping the canals of five and eight molars. Operator experience affected the occurrence of fracture and plastic deformation during shaping.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Endodoncia/educación , Diseño de Equipo , Falla de Equipo , Equipo Reutilizado , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Rotación , Estrés Mecánico , Estudiantes de Odontología , Propiedades de SuperficieRESUMEN
AIM: To evaluate the effect of repeated sterilization cycles in dry oven or autoclave, on the mechanical behaviour and fatigue resistance of rotary endodontic Ni-Ti instruments. METHODOLOGY: New Ni-Ti instruments were subjected to five consecutive sterilization cycles in a dry oven or steam autoclave. Microhardness was measured in the nonmachined parts of the shanks of instruments using a Vickers indenter. Specimens of Ni-Ti wires were submitted to the same sterilization protocol and tensile tested until rupture. A group of instruments were fatigued to one half of their average fatigue life and then sterilized. New and sterilized instruments were fatigue tested until rupture. anova tests at alpha = 0.05 were used for statistical analysis. RESULTS: Sterilization procedures resulted in no significant changes in Vickers microhardness, nor in the parameters describing the mechanical behaviour of the wires. However, the number of cycles to failure was statistically higher for all instruments after dry heat or autoclave sterilization cycles. In the instruments previously fatigued to one half of their fatigue life, autoclave sterilization gave rise to an increase of 39% in the remaining number of cycles to failure. CONCLUSIONS: Changes in the mechanical properties of Ni-Ti endodontic instruments after five cycles of commonly used sterilization procedures were insignificant. The sterilization procedures are safe as they produced a significant increase in the fatigue resistance of the instruments.
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular/instrumentación , Esterilización , Análisis de Varianza , Aleaciones Dentales , Análisis del Estrés Dental , Falla de Equipo , Dureza , Calor , Níquel , Vapor , Estrés Mecánico , Resistencia a la Tracción , TitanioRESUMEN
AIM: To analyse the influence of cyclic loading on the mechanical behaviour of nickel-titanium (NiTi) wires employed in the manufacture of ProFile rotary endodontic instruments. METHODOLOGY: Nickel-titanium wires, 1.2 mm in diameter, taken from the production line of ProFile rotary endodontic instruments before the final machining step, were tensile-tested to rupture in the as-received condition and after 100 load-unload cycles in the superelastic plateau (4% elongation). The wires were characterized by X-ray energy-dispersive spectroscopy, X-ray diffraction and by differential scanning calorimetry and compared with new size 30, .06 taper ProFile instruments. The fracture surfaces of the wires were observed by scanning electron microscopy. RESULTS: The mechanical properties of the as-received wires, their chemical composition, the phases present and their transformation temperatures were consistent with their final application. Only small changes, which decreased after the first few cycles, took place in the mechanical properties of the cycled wires. The stress at maximum load and the plastic strain at breakage remained the same, while the critical stress for inducing the superelastic behaviour, which is related to the restoring force of the endodontic instruments, decreased by approximately 27%. CONCLUSIONS: The mechanical behaviour of the NiTi wires was modified slightly by cyclic tensile loading in the superelastic plateau. As the changes tended towards stabilization, the clinical use of rotary NiTi ProFile instruments does not compromise their superelastic properties until they fracture by fatigue or torsional overload, or are otherwise discarded.
Asunto(s)
Aleaciones Dentales/química , Níquel/química , Preparación del Conducto Radicular/instrumentación , Titanio/química , Rastreo Diferencial de Calorimetría , Fenómenos Químicos , Química Física , Elasticidad , Microanálisis por Sonda Electrónica , Diseño de Equipo , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Rotación , Estrés Mecánico , Propiedades de Superficie , Resistencia a la Tracción , Difracción de Rayos XRESUMEN
AIM: The purpose of this preliminary study was to analyze surface irregularities on ProFile nickel-titanium (NiTi) rotary instruments before use, after sterilization by two different methods and after instrumentation of molar root canals. METHODOLOGY: Five new ProFile NiTi rotary instruments with 0.04 taper, size 20, five instruments with 0.04 taper, size 25 and five with 0.06 taper, size 20 were analyzed by scanning electron microscopy (SEM) and X-ray energy-dispersive spectroscopy (EDS). The instruments were then divided into two groups: three of each taper and size were sterilized in a dry heat sterilizer, whilst two of each taper and size were sterilized in an autoclave. After inspection by the same techniques, the files were used to instrument six molar root canals, and again analyzed by SEM/EDS. RESULTS: Together with the usual machining defects, a variable amount of material containing mainly carbon and sulphur was found on the surface of new instruments. This material was not removed by standard cleaning and sterilization procedures. The use of the files for instrumentation of root canals eliminated a considerable amount of the adhered substance, but deposits rich in calcium and phosphorus accumulated on the remaining impurities. CONCLUSIONS: The adherence of dentine on surface deposits found on new ProFile instruments requires special cleaning, prior to sterilization.