Mechanically Interlocked Polyrotaxane Networks with Collective Motions of Multiple Main-Chain Mechanical Bonds.

Type I main-chain polyrotaxanes (PRs) with multiple wheels threaded onto the axle are widely employed to design slide-ring materials. However, Type II main-chain PRs with axles threading into the macrocycles on the polymer backbones have rarely been studied, although they feature special topological structures and dynamic characteristics. Herein, we report the design and preparation of Type II main-chain PR-based mechanically interlocked networks (PRMINs), based on which the relationship between microscopic motion of mechanical bonds on the PRs and macroscopic mechanical performance of materials has been revealed. The representative PRMIN-2 exhibits a robust feature in tensile tests with high stretchability (1680%) and toughness (47.5 MJ/m3). Moreover, it also has good puncture performance with puncture energy of 22.0 mJ. Detailed rheological measurements and coarse-grained molecular dynamics (CGMD) simulation reveal that the embedded multiple [2]rotaxane mechanical bonds on the PR backbones of PRMINs could undergo a synergistic long-range sliding motion under external force, with the introduction of collective dangling chains into the network. As a result, the synchronized motions of coherent PR chains can be readily activated to accommodate network deformation and efficiently dissipate energy, thereby leading to enhanced mechanical performances of PRMINs.

A Stretchable and Tough Graphene Film Enabled by Mechanical Bond.

The pursuit of fabricating high-performance graphene films has aroused considerable attention due to their potential for practical applications. However, developing both stretchable and tough graphene films remains a formidable challenge. To address this issue, we herein introduce mechanical bond to comprehensively improve the mechanical properties of graphene films, utilizing [2]rotaxane as the bridging unit. Under external force, the [2]rotaxane cross-link undergoes intramolecular motion, releasing hidden chain and increasing the interlayer slip distance between graphene nanosheets. Compared with graphene films without [2]rotaxane cross-linking, the presence of mechanical bond not only boosted the strength of graphene films (247.3 vs 74.8 MPa) but also markedly promoted the tensile strain (23.6 vs 10.2 %) and toughness (23.9 vs 4.0 MJ/m3). Notably, the achieved tensile strain sets a record high and the toughness surpasses most reported results, rendering the graphene films suitable for applications as flexible electrodes. Even when the films were stretched within a 20 % strain and repeatedly bent vertically, the light-emitting diodes maintained an on-state with little changes in brightness. Additionally, the film electrodes effectively actuated mechanical joints, enabling uninterrupted grasping movements. Therefore, the study holds promise for expanding the application of graphene films and simultaneously inspiring the development of other high-performance two-dimensional films.

Oligo[2]catenane That Is Robust at Both the Microscopic and Macroscopic Scales.

Polycatenanes are extremely attractive topological architectures on account of their high degrees of conformational freedom and multiple motion patterns of the mechanically interlocked macrocycles. However, exploitation of these peculiar structural and dynamic characteristics to develop robust catenane materials is still a challenging goal. Herein, we synthesize an oligo[2]catenane that showcases mechanically robust properties at both the microscopic and macroscopic scales. The key feature of the structural design is controlling the force-bearing points on the metal-coordinated core of the [2]catenane moiety that is able to maximize the energy dissipation of the oligo[2]catenane via dissociation of metal-coordination bonds and then activation of sequential intramolecular motions of circumrotation, translation, and elongation under an external force. As such, at the microscopic level, the single-molecule force spectroscopy measurement exhibits that the force to rupture dynamic bonds in the oligo[2]catenane reaches a record high of 588 ± 233 pN. At the macroscopic level, our oligo[2]catenane manifests itself as the toughest catenane material ever reported (15.2 vs 2.43 MJ/m3). These fundamental findings not only deepen the understanding of the structure-property relationship of poly[2]catenanes with a full set of dynamic features but also provide a guiding principle to fabricate high-performance mechanically interlocked catenane materials.

Insights into the Correlation of Cross-linking Modes with Mechanical Properties for Dynamic Polymeric Networks.

Simultaneously introducing covalent and supramolecular cross-links into one system to construct dually cross-linked networks, has been proved an effective approach to prepare high-performance materials. However, so far, features and advantages of dually cross-linked networks compared with those possessing individual covalent or supramolecular cross-linking points are rarely investigated. Herein, on the basis of comparison between supramolecular polymer network (SPN), covalent polymer network (CPN) and dually cross-linked polymer network (DPN), we reveal that the dual cross-linking strategy can endow the DPN with integrated advantages of CPN and SPN. Benefiting from the energy dissipative ability along with the dissociation of host-guest complexes, the DPN shows excellent toughness and ductility similar to the SPN. Meanwhile, the elasticity of covalent cross-links in the DPN could rise the structural stability to a level comparable to the CPN, exhibiting quick deformation recovery capacity. Moreover, the DPN has the strongest breaking stress and puncture resistance among the three, proving the unique property advantages of dual cross-linking method. These findings gained from our study further deepen the understanding of dynamic polymeric networks and facilitate the preparation of high-performance elastomeric materials.

Mechanically Interlocked [2]Rotaxane Aerogels with Tunable Morphologies and Mechanical Properties.

Mechanical bonds have been utilized as promising motifs to construct mechanically interlocked aerogels (MIAs) with mechanical adaptivity and multifunctionality. However, fabricating such aerogels with not only precise chemical structures but also dynamic features remains challenging. Herein, we present MIAs carrying dense [2]rotaxane units, which bestow both the stability and flexibility of the aerogel network. Owing to the stable chemical structure of a [2]rotaxane, MIAs possessing a precise and full-scale mechanically interlocked network could be fabricated with the aid of diverse solvents. In addition, the dynamic nature of the [2]rotaxane resulted in morphologies and mechanical performances of the MIAs that can be dramatically modulated under chemical stimuli. We hope that the structure-property relationship in MIAs will facilitate the development of mechanically interlocked materials and provide novel opportunities toward constructing smart materials with multifunctionalities.

Highly Strong and Tough Supramolecular Polymer Networks Enabled by Cryptand-Based Host-Guest Recognition.

Supramolecular polymer networks (SPNs) demonstrate great potential in the development of smart materials owing to their attractive dynamic properties. However, as they suffer from the inherent weak bonding of most noncovalent cross-links, it remains a significant challenge to construct SPNs with outstanding mechanical performance. Herein, we exploit the cryptand/paraquat host-guest recognition motifs as cross-links to prepare a class of highly strong and tough SPNs. Unlike those supramolecular cross-links with relatively weak binding abilities, the cryptand-based host-guest interactions have a high association constant and steady complexing structure, which effectively stabilizes the network and resists mechanical deformation under external force. Such favorable structural stability endows our SPNs with greatly enhanced mechanical performance, compared with the control-1 cross-linked by the weakly complexed crown ether/secondary ammonium salt motif (tensile strength: 21.1±0.5 vs 2.8±0.1 MPa; Young's modulus: 102.6±4.8 vs 2.1±0.3 MPa; toughness: 90.4±2.0 vs 10.8±0.6 MJ m-3 ). Moreover, our SPNs also retain abundant dynamic properties including good abilities in energy dissipation, reprocessability, and stimuli-responsiveness. These findings provide novel insights into the preparation of SPNs with enhanced mechanical properties, and promote the development of high-performance intelligent supramolecular materials.

Mechanically Interlocked Vitrimers.

Mechanically interlocked networks (MINs) have emerged as an encouraging platform for the development of mechanically robust yet adaptive materials. However, the difficulty in reversibly breaking the mechanical bonds poses a real challenge to MINs as customizable and sustainable materials. Herein, we couple the vitrimer chemistry with mechanically interlocked structures to generate a new class of MINs─referred to as mechanically interlocked vitrimers (MIVs)─to address the challenge. Specifically, we have prepared the acetoacetate-decorated [2]rotaxane that undergoes catalyst-free condensation reaction with two commercially available multiamine monomers to furnish MIVs. Compared with the control whose wheels are nonslidable under applied force, our MIVs with slidable mechanically interlocked motifs showcase enhanced mechanical performance including Young's modulus (18.5 ± 0.9 vs 1.0 ± 0.1 MPa), toughness (3.7 ± 0.1 vs 0.9 ± 0.1 MJ/m3), and damping capacity (98% vs 72%). The structural basis behind unique property profiles is demonstrated to be the force-induced host-guest dissociation and consequential intramolecular sliding of the wheels along the axles. The peculiar behaviors represent a consecutive energy dissipation mechanism, which provides a complement to other pathways that mainly depend on the breaking of sacrificial bonds. Moreover, by virtue of the vitrimer chemistry of vinylogous urethanes, we impart reprocessability and chemical recyclability to the MINs, thereby empowering the reconfiguration of the networks without breaking of the mechanical bonds. Finally, it is disclosed that the intramolecular motions of [2]rotaxanes could accelerate the dynamic exchange of the vinylogous urethane bonds via loosening the network, suggestive of a synergistic effect between the dual dynamic entities.

Mechanically Interlocked Aerogels with Densely Rotaxanated Backbones.

Mechanically interlocked molecules are considered promising candidates for the construction of self-adaptive materials by virtue of their fascinating structural and dynamic features. However, it is still a great challenge to fabricate such materials with higher complexity and richer functionality. Herein, we propose the concept of mechanically interlocked aerogels (MIAs) in which the three-dimensional (3D) porous frameworks are made of dense mechanically interlocked modules, thereby enabling the integration of mechanical adaptivity and multifunctionality in a single entity. The lightweight MIA monoliths possess a good appearance and hierarchical meso- and submicron-pores. Profiting from the combination of dynamic mechanical bonds and porous skeletons of aerogels, our MIAs are not only mechanically robust (average Young's modulus = 5.80 GPa and specific modulus = 130.5 kN·m/kg) but also showcase favorable mechanical adaptivity and responsiveness under external stimuli. Taking advantage of the above integrative merits, we demonstrate the multifunctionality of our MIAs in terms of iodine uptake, thermal insulation, and selective adsorption of organic dyes. Our work opens the door to designing intelligent aerogels with delicate topological chemical structures while facilitating the development of mechanically interlocked materials.

The hypoxia-driven crosstalk between tumor and tumor-associated macrophages: mechanisms and clinical treatment strategies.

Given that hypoxia is a persistent physiological feature of many different solid tumors and a key driver for cancer malignancy, it is thought to be a major target in cancer treatment recently. Tumor-associated macrophages (TAMs) are the most abundant immune cells in the tumor microenvironment (TME), which have a large impact on tumor development and immunotherapy. TAMs massively accumulate within hypoxic tumor regions. TAMs and hypoxia represent a deadly combination because hypoxia has been suggested to induce a pro-tumorigenic macrophage phenotype. Hypoxia not only directly affects macrophage polarization, but it also has an indirect effect by altering the communication between tumor cells and macrophages. For example, hypoxia can influence the expression of chemokines and exosomes, both of which have profound impacts on the recipient cells. Recently, it has been demonstrated that the intricate interaction between cancer cells and TAMs in the hypoxic TME is relevant to poor prognosis and increased tumor malignancy. However, there are no comprehensive literature reviews on the molecular mechanisms underlying the hypoxia-mediated communication between tumor cells and TAMs. Therefore, this review has the aim to collect all recently available data on this topic and provide insights for developing novel therapeutic strategies for reducing the effects of hypoxia.

An efficient and cost-effective method for the purification of human basophils.

Human basophils are terminally differentiated granulocytes that are least abundant in the peripheral blood but play important roles in allergic diseases. Studies on human basophils are limited by the high cost on the isolation of human basophils by magnetic-activated cell sorting (MACS) for negative depletion of non-basophils, followed by CD123-based positive selection of basophils. Moreover, such CD123-based purification of basophils may be limited by blocking of the binding of IL-3/anti-CD123 to the surface CD123. Here we identified SSClow CD4- CD127- HLA-DR- CRTH2high as unique markers for the identification of human basophils through stringent flow cytometric analysis of leukocytes from buffy coat. We established an efficient and cost-effective method for isolating human basophils from buffy coat based on positive magnetic selection of CRTH2+ cells followed by flow cytometric sorting of SSClow CD4- CD127- HLA-DR- CRTH2high cells. Approximately 1 to 1.5 million basophils were isolated from one buffy coat with a purity of >97%. Basophils purified by this method were viable and efficiently responded to key regulators of basophils including IL-3 and anti-IgE. This method can be used for purifying human basophils for subsequent functional studies.

Gender differences in the ideal cutoffs of visceral fat area for predicting MAFLD in China.

BACKGROUND: Since the discovery of metabolic-associated fatty liver disease (MAFLD) in 2020, no report on the connection between the visceral fat area (VFA) and MAFLD has been published in China, and the ideal cutoffs of VFA for predicting MAFLD has not been determined so far. Thus, the purpose of this research was to clarify the relationship between VFA and MAFLD and the ideal cutoffs of VFA to predict MAFLD in the Chinese population. METHODS: Five thousand three hundred forty subjects were included in this research, with 30% randomly selected for the validation set (n = 1602) and 70% for the Training set (n = 3738). The association between VFA and MAFLD was determined by multiple logistic regression. ROC curves were used to evaluate the prediction effect of VFA on MAFLD. RESULTS: Multiple logistic regression analysis revealed that the VFA ORs (95% CIs) were 1.25 (1.20, 1.29) for women and 1.15 (1.12, 1.17) for men. Meanwhile, the VFA quartile OR (95% CI) were 3.07 (1.64, 5.75), 7.22 (3.97, 13.14), 18.91 (10.30, 34.71) for women and 3.07 (1.64, 5.75), 7.22 (3.97, 13.14),18.91 (10.30, 34.71) for men in the Q2, Q3, and Q4 groups compared with Q1. The ROC curve showed the VFA, WC, WHR, and WHtR to predict MAFLD, the AUC value of VFA was the highest and the prediction effect was the best. The ideal cutoffs of VFA to predict MAFLD was 115.55 cm2 for women and 178.35 cm2 for men, and the AUC was 0.788 and 0.795, respectively. Finally, the AUC was 0.773 for women and 0.800 for men in the validation set. CONCLUSION: VFA was an independent predictive factor for MAFLD, and the ideal cutoff of VFA to predict MAFLD was 115.55 cm2 in women and 178.35 cm2 in men.

Induction of the apoptosis, degranulation and IL-13 production of human basophils by butyrate and propionate via suppression of histone deacetylation.

Allergic diseases are caused by dysregulated Th2 immune responses involving multiple effector cells including basophils. Short chain fatty acids (SCFAs), mainly acetate, propionate and butyrate, exert immunomodulatory functions via activation of its receptors GPR41 and GPR43, and inhibition of the histone deacetylases (HDACs) activity. In allergic diseases, SCFAs suppress the activity of mast cells, eosinophils and type 2 innate lymphoid cells (ILC2) but enhance the function of Th2 cells. Here, we aimed to elucidate the function of SCFAs on human basophils. Human basophils were purified from healthy donors by flow cytometric sorting. The surface proteins, apoptosis and degranulation of basophils were analyzed by flow cytometric analysis. The mRNA expression was assayed using real-time PCR. Interleukin 4 (IL-4) and IL-13 were measured by ELISA. Histone acetylation was examined by western blot. GPR41 was expressed by basophils and was enhanced by IL-3. Acetate induced intracellular calcium influx in basophils which was suppressed by blocking GPR41. Propionate and butyrate, but not acetate, induced the expression of CD69 and IL-13. In addition, propionate and butyrate enhanced IgE-mediated basophil degranulation but inhibited basophil survival and IL-4 secretion. Propionate and butyrate induced histone acetylation of basophils and suppression of HDACs activity mimicked the effects of propionate and butyrate on human basophils. Our findings demonstrate that propionate and butyrate may play a complex role in regulating basophil apoptosis, activation and degranulation via inhibiting HDACs activity. The in vivo effects of SCFAs on the regulation of basophil-associated allergic diseases need to be further explored.

Muscle-Mimetic Synergistic Covalent and Supramolecular Polymers: Phototriggered Formation Leads to Mechanical Performance Boost.

A thin filament stimulated by Ca2+ to combine with myosin is the structural basis to achieve filament sliding and muscle contraction. Though a large variety of artificial materials has been developed by mimicking muscle, the on-demand combination of the actin filament and myosin has never been precisely reproduced in polymeric systems. Herein, we show that both the combination process and the combined structure of actin filament and myosin have been mimicked to construct synergistic covalent and supramolecular polymers (CSPs). Specifically, photoirradiation as a stimulus induces the independently formed covalent polymers (CPs) and supramolecular polymers (SPs) to interact with each other through activated quadruple H-bonding. The resultant CSPs possess a unique network structure which not only facilitates the synergistic effect of CPs and SPs to afford stiff, strong, yet tough materials but also provides efficient pathways to dissipate energy with the damping capacity of the representative material being higher than 95%. Furthermore, muscle functions, for example, by becoming stiff during contraction and self-growth by training, are imitated well in our system via in situ phototriggered formation of CSP in the solid state. We hope that the fundamental understanding gained from this work will promote the development of synergistic CSP systems with emergent functions and applications by mimicking the principle of muscle movements.

Biomimetic Impact Protective Supramolecular Polymeric Materials Enabled by Quadruple H-Bonding.

Nature has been inspiring scientists to fabricate impact protective materials for applications in various aspects. However, it is still challenging to integrate flexible, stiffness-changeable, and protective properties into a single polymer, although these merits are of great interest in many burgeoning areas. Herein, we report an impact-protective supramolecular polymeric material (SPM) with unique impact-hardening and reversible stiffness-switching characteristics by mimicking sea cucumber dermis. The emergence of softness-stiffness switchability and subsequent protective properties relies on the dynamic aggregation of the nanoscale hard segments in soft transient polymeric networks modulated by quadruple H-bonding. As such, we demonstrate that our SPM could efficiently reduce the impact force and increase the buffer time of the impact. Importantly, we elucidate the underlying mechanism behind the impact hardening and energy dissipation in our SPM. Based on these findings, we fabricate impact- and puncture-resistant demos to show the potential of our SPM for protective applications.

A Mortise-and-Tenon Joint Inspired Mechanically Interlocked Network.

Mortise-and-tenon joints have been widely used for thousands of years in wooden architectures in virtue of their artistic and functional performance. However, imitation of similar structural and mechanical design philosophy to construct mechanically adaptive materials at the molecular level is a challenge. Herein, we report a mortise-and-tenon joint inspired mechanically interlocked network (MIN), in which the [2]rotaxane crosslink not only mimics the joint in structure, but also reproduces its function in modifying mechanical properties of the MIN. Benefiting from the hierarchical energy dissipative ability along with the controllable intramolecular movement of the mechanically interlocked crosslink, the resultant MIN simultaneously exhibits notable mechanical adaptivity and structural stability in a single system, as manifested by decent stiffness, strength, toughness, and deformation recovery capacity.

Woven Polymer Networks via the Topological Transformation of a [2]Catenane.

Weaving technology has been widely used to manufacture macroscopic fabrics to meet the artistic and practical needs of humanity for thousands of years. However, the fabrication of molecular fabrics with fascinating topologies and unique mechanical properties represents a significant challenge. Herein, we describe a topological transformation strategy to construct woven polymer networks (WPNs) at the molecular level via ring-opening metathesis polymerization (ROMP) of a zinc-template [2]catenane. The key feature of this approach is the exploitation of the pre-existing catenane crossing points that maintain the dense woven structure and the flexible alkyl chains on the [2]catenane that synergistically work with the crossing points to modulate the physicochemical and mechanical properties of the woven materials. As a result, the WPN possesses a certain degree of flexibility and stretchability, as well as high thermostability and mechanical robustness. Furthermore, we could remove the zinc ions to endow the WPN with more degrees of freedom and then enhance its mechanical behaviors by remetalation. This study not only provides a novel strategy toward woven materials with intriguing structural features and emergent mechanical adaptivities, but also highlights that mechanically interlocked molecules could offer unique opportunities for the construction of smart supramolecular materials with peculiar interlaced topologies at the molecular scale.

Liposome-loaded thermo-sensitive hydrogel for stabilization of SN-38 via intratumoral injection: optimization, characterization, and antitumor activity.

Main challenges of the clinical use of 7-ethyl-10-hydroxycamptothecin (SN-38) are its facile transition between the active lactone form (SN-38 A) and the inactive carboxylate form (SN-38I) under physiological conditions and its low solubility. The purpose of this study was to develop a thermo-sensitive hydrogel system with acidic SN-38 liposomes (SN-38-Lip-Gel) for local chemotherapy to solve these problems and to evaluate its antitumor activity and tissue distribution in tumor-bearing mice. A study of structural conversion between SN-38I and SN-38 A under various pH conditions indicated that acidic solution could inhibit the conversion. Namely, a preparation with low pH was essential to stabilize lactone form of SN-38. SN-38-Lip-Gel had an appropriate gelation time (GT) at 25/37 °C. The particle size of SN-38-Lip-Gel was similar to that of SN-38-Lip. SN-38-Lip-Gel showed a slower release than SN-38-Lip in vitro. SN-38-Lip-Gel suggested pH-dependent stability, the percentage of SN-38 A remaining decreased along with the increasing pH. In vivo studies SN-38-Lip-Gel showed better antitumor efficacy and lower systemic toxicity compared with other groups at the same drug dose. In conclusion, SN-38-Lip-Gel could improve the effective use of SN-38 by stabilizing the lactone form, extending the drug release, providing a high local drug concentration, and reducing systemic toxicity.

Light and Magnetic Dual-Responsive Pickering Emulsion Micro-Reactors.

Emulsion droplets can serve as ideal compartments for reactions. In fact, in many cases, the chemical reactions are supposed to be triggered at a desired position and time without change of the system environment. Here, we present a type of light and magnetic dual-responsive Pickering emulsion microreactor by coadsorption of light-sensitive titania (TiO2) and super paramagnetic iron oxide (Fe3O4) nanoparticles at the oil-water interface of emulsion droplets. The droplets encapsulating different reactants in advance can be driven close to each other by an external magnetic field, and then the chemical reaction is triggered by UV illumination due to the contact of the isolated reactants as a result of droplet coalescence. An insight into the incorporation of hydrophobic TiO2 and hydrophilic Fe3O4 nanoparticles simultaneously at the emulsion interface is achieved. On the basis of that, an account is given of the coalescence mechanism of the Pickering emulsion microreactors. Our work not only provides a novel Pickering emulsion microreactor platform for triggering chemical reactions in a nonintrusive and well-controlled way but also opens a promising avenue to construct multifunctional Pickering emulsions by assembly of versatile building block nanoparticles at the interface of emulsion droplets.

Light-Triggered Release from Pickering Emulsions Stabilized by TiO2 Nanoparticles with Tailored Wettability.

In this work, a new strategy for developing light-triggered Pickering emulsions as smart soft vehicles for on-demand release is proposed. Initially, UV-induced tailored wettability allows anchoring of TiO2 nanoparticles at the interface to prepare stable water in oil emulsions. Such emulsions show the efficacy of microencapsulation and controlled release by demulsification due to the hydrophilic conversion of the TiO2 nanoparticles using a noninvasive light irradiation trigger. A molecule of interest is selected as a model cargo to quantitatively evaluate the as-prepared Pickering emulsions for their encapsulation and release behaviors. Moreover, light-responsive emulsion destabilization mechanism is studied as a function of particle concentration, light wavelength, and light intensity, respectively, determined by drop diameter evolution and droplet coalescence kinetics plots. For consideration of application in life sciences, Pickering emulsions sensitive to visible light are also established based on nitrogen doping of TiO2 nanoparticle emulsifiers.

[Identification and analysis of Corydalis boweri, Meconopsis horridula and their close related species of the same genus by using ITS2 DNA barcode].

The study is aimed to ensure the quality and safety of medicinal plants by using ITS2 DNA barcode technology to identify Corydalis boweri, Meconopsis horridula and their close related species. The DNA of 13 herb samples including C. boweri and M. horridula from Lhasa of Tibet was extracted, ITS PCR were amplified and sequenced. Both assembled and web downloaded 71 ITS2 sequences were removed of 5. 8S and 28S. Multiple sequence alignment was completed and the intraspecific and interspecific genetic distances were calculated by MEGA 5.0, while the neighbor-joining phylogenetic trees were constructed. We also predicted the ITS2 secondary structure of C. boweri, M. horridula and their close related species. The results showed that ITS2 as DNA barcode was able to identify C. boweri, M. horridula as well as well as their close related species effectively. The established based on ITS2 barcode method provides the regular and safe detection technology for identification of C. boweri, M. horridula and their close related species, adulterants and counterfeits, in order to ensure their quality control, safe medication, reasonable development and utilization.