RESUMEN
This study aimed to elucidate the mechanisms and kinetics of coating failure for enteric coated beads exposed to high-humidity conditions at different storage temperatures. Enteric coated beads were placed on high-humidity conditions (75 to 98% relative humidity (RH)) in the temperature range of 5 to 40°C. These stability samples of beads were tested for acid dissolution and water activity and also analyzed with SEM, X-ray CT, and DMA. Exposure of enteric coated beads to high humidity led to increased gastric release of drug which eventually failed the dissolution specification. SEM showed visible cracks on the surface of beads exposed to 5°C/high humidity and fusion of enteric beads into agglomerates at 40°C/high humidity. In a non-destructive time elapse study, X-ray CT demonstrated swelling of microcrystalline cellulose cores, crack initiation, and propagation through the API layer within days under 5°C/98% RH storage conditions and ultimately fracture through the enteric coating. DMA data showed a marked reduction in Tg of the enteric coating materials after exposure to humidity. At 5°C/high humidity, the hygroscopic microcrystalline cellulose core absorbed moisture leading to core swelling and consequent fracture through the brittle API and enteric layers. At 40°C (high humidity) which is above the Tg of the enteric polymer, enteric coated beads coalesced into agglomerates due to melt flow of the enteric coating. We believe it is the first report on two distinct failure models of enteric coated dosage forms.
Asunto(s)
Celulosa/química , Excipientes/química , Microesferas , Celulosa/metabolismo , Estabilidad de Medicamentos , Excipientes/metabolismo , Humedad , Polímeros , Comprimidos Recubiertos , Agua/química , Agua/metabolismoRESUMEN
Disproportionation propensity of salts (HCl, HBr, heminapadisylate) and adipic acid cocrystal of corticotropin releasing hormone receptor-1 antagonist was studied using model free kinetics. Using thermogravimetic weight loss profile or heat flow curves from differential scanning calorimetry, an activation energy plot for salts and cocrystal was generated based on model free kinetics. This activation energy of disproportionation provided qualitative information about the solid state salt stability. To ensure the stability throughout the shelf life, "prototype" formulations of salts and cocrystal in tablet form were stored at 40 °C and several water vapor pressures. Disproportionation kinetics were studied in these prototype tablet formulations using two-dimensional X-ray diffractometry. Formulations containing the adipic acid cocrystal or heminapadisylate salt did not show disproportionation of API when stored at 40 °C/75% RH for 300 days. On the other hand, formulations containing HCl or HBr salt disproportionated. Though isostructural, the disproportionation propensity of HBr and HCl salts was quite different. The HCl salt highlighted the important role that volatility of the counterion plays in the physical stability of the formulations. Solution state stability (i.e., in dissolution medium) of salts and cocrystal was also assessed and compared with solid state stability, by determining their solubility at different pH's, and intrinsic dissolution rate.
Asunto(s)
Estabilidad de Medicamentos , Excipientes/química , Preparaciones Farmacéuticas/química , Sales (Química)/química , Agua/química , Cinética , Solubilidad , VolatilizaciónRESUMEN
This work describes a melt granulation technique to improve the dissolution characteristics of a poorly water-soluble drug, griseofulvin. Melt granulation technique is a process by which pharmaceutical powders are efficiently agglomerated by a meltable binder. The advantage of this technique compared to a conventional granulation is that no water or organic solvents is needed. Because there is no drying step, the process is less time consuming and uses less energy than wet granulation. Granules were prepared in a lab scale high shear mixer, using a jacket temperature of 60 degrees C and an impeller speed of approximately 20,000 rpm. The effect of drug loading (2.5/5%), binder (PEG 3350/Gelucire 44/14), filler (starch/lactose), and HPMC on the dissolution of griseofulvin was investigated using a half two level-four factor factorial design. The granules were characterized using powder XRD, DSC and SEM techniques. A significant enhancement in the in vitro dissolution profiles of the granules was observed compared to the pure drug and drug excipient physical mixtures. The factorial design results indicated that higher drug loading and the presence of HPMC reduced the extent of dissolution of the drug, whereas, the presence of starch enhanced the dissolution rate. XRD data confirmed crystalline drug in formulation matrices. DSC results indicated monotectic mixtures of griseofulvin with PEG in the granulated formulations. In conclusion, the results of this work suggest that melt granulation is a useful technique to enhance the dissolution rate of poorly water-soluble drugs, such as, griseofulvin.
Asunto(s)
Antifúngicos/química , Química Farmacéutica , Griseofulvina/química , Calor , Polvos , Solubilidad , Tecnología FarmacéuticaRESUMEN
Prior to this study, cilostazol, an antithrombotic drug, was thought to exist as a single crystalline phase with a melting point of approximately 159 degrees C (Form A). On cooling, melts often form a glass that, when heated, may crystallize as additional crystalline polymorphic forms. Cilostazol, when reheated, subsequently forms polymorphs that melt at approximately 136 degrees C (Form B) and 146 degrees C (Form C). Free-energy temperature diagrams estimated from calorimetry data reveal that each pair of the cilostazol polymorphs (A-B, B-C, and A-C) is monotropic. Essentially pure samples of suitable crystalline shape and size permitted single crystal structural analysis of Forms A and C. Theoretical solubility ratios calculated using calorimetry data indicate that at 37 degrees C, Form B should be more than four times more soluble and Form C should be more than two times more soluble than Form A. Forms B and C could not be crystallized from solvents. Metastable forms from super cooled melts analyzed by intrinsic dissolution and Fourier transform-Raman experiments demonstrated that Forms B and C undergo a rapid, solvent-mediated recrystallization to Form A, making dissolution rate measurements difficult.