Highly Transparent, Yet Photoluminescent: 2D CdSe/CdS Nanoplatelet-Zeolitic Imidazolate Framework Composites Sensitive to Gas Adsorption.

In this work, thin composite films of zeolitic imidazolate frameworks (ZIFs) and colloidal two-dimensional (2D) core-crown CdSe/CdS nanoplatelet (NPL) emitters with minimal scattering are formed by a cycled growth method and yield highly transparent coatings with strong and narrow photoluminescence of the NPLs at 546 nm (FWHM: 25 nm) in a solid-state composite structure. The porous ZIF matrix acts as functional encapsulation for the emitters and enables the adsorption of the guest molecules water and ethanol. The adsorption and desorption of the guest molecules is then characterized by a reversable photoluminescence change of the embedded NPLs. The transmittance of the composite films exceeds the values of uncoated glass at visible wavelengths where the NPL emitters show no absorption (>540 nm) and renders them anti-reflective coatings. At NPL absorption wavelengths (440-540 nm), the transmittance of the thin composite film-coated glass lies close to the transmittance of uncoated glass. The fast formation of innovative, smooth NPL/ZIF composite films without pre-polymerizing the colloidal 2D nanostructures first provides a powerful tool toward application-oriented photoluminescence-based gas sensing.

Investigation of the Photocatalytic Hydrogen Production of Semiconductor Nanocrystal-Based Hydrogels.

Destabilization of a ligand-stabilized semiconductor nanocrystal solution with an oxidizing agent can lead to a macroscopic highly porous self-supporting nanocrystal network entitled hydrogel, with good accessibility to the surface. The previously reported charge carrier delocalization beyond a single nanocrystal building block in such gels can extend the charge carrier mobility and make a photocatalytic reaction more probable. The synthesis of ligand-stabilized nanocrystals with specific physicochemical properties is possible, thanks to the advances in colloid chemistry made in the last decades. Combining the properties of these nanocrystals with the advantages of nanocrystal-based hydrogels will lead to novel materials with optimized photocatalytic properties. This work demonstrates that CdSe quantum dots, CdS nanorods, and CdSe/CdS dot-in-rod-shaped nanorods as nanocrystal-based hydrogels can exhibit a much higher hydrogen production rate compared to their ligand-stabilized nanocrystal solutions. The gel synthesis through controlled destabilization by ligand oxidation preserves the high surface-to-volume ratio, ensures the accessible surface area even in hole-trapping solutions and facilitates photocatalytic hydrogen production without a co-catalyst. Especially with such self-supporting networks of nanocrystals, the problem of colloidal (in)stability in photocatalysis is circumvented. X-ray photoelectron spectroscopy and photoelectrochemical measurements reveal the advantageous properties of the 3D networks for application in photocatalytic hydrogen production.

Fragment-based approach for the efficient calculation of the refractive index of metal-organic frameworks.

Increasing demands on materials in the field of optical applications require novel materials. Metal-organic frameworks (MOFs) are a prominent class of hybrid inorganic-organic materials with a modular layout. This allows the fine-tuning of their optical properties and the tailored design of optical systems. In the present theoretical study, an efficient method to calculate the refractive index (RI) of MOFs is introduced. For this purpose, the MOF is split into disjoint fragments, the linkers and the inorganic building units. The latter are disassembled until metal ions are obtained. The static polarizabilities are calculated individually using molecular density functional theory (DFT). From these, the MOF's RI is calculated. To obtain suitable polarizabilities, an exchange-correlation functional benchmark was performed first. Subsequently, this fragment-based approach was applied to a set of 24 MOFs including Zr-based MOFs and ZIFs. The calculated RI values were compared to the experimental values and validated using HSE06 hybrid functional DFT calculations with periodic boundary conditions. The examination of the MOF set revealed a speed up of the RI calculations by the fragment-based approach of up to 600 times with an estimated maximal deviation from the periodic DFT results below 4%.

Development of high refractive index UiO-66 framework derivatives via ligand halogenation.

UiO-66 is a Zr-based metal-organic framework (MOF) with exceptional chemical and thermal stability. The modular design of a MOF allows the tuning of its electronic and optical properties to obtain tailored materials for optical applications. Making use of the halogenation of the 1,4-benzenedicarboxylate (bdc) linker, the well-known monohalogenated UiO-66 derivatives were examined. In addition, a novel diiodo bdc based UiO-66 analogue is introduced. The novel UiO-66-I2 MOF is fully characterized experimentally. By applying density functional theory (DFT), fully relaxed periodic structures of the halogenated UiO-66 derivatives are generated. Subsequently, the HSE06 hybrid DFT functional is used to calculate the electronic structures and optical properties. The obtained band gap energies are validated with UV-Vis measurements to assure a precise description of the optical properties. Finally, the calculated refractive index dispersion curves are evaluated underlining the capabilities to tailor the optical properties of MOFs by linker functionalization.

Tuning the optical properties of the metal-organic framework UiO-66 via ligand functionalization.

Metal-organic frameworks (MOFs) are a promising class of materials for optical applications, especially due to their modular design which allows fine-tuning of the relevant properties. The present theoretical study examines the Zr-based UiO-66-MOF and derivatives of it with respect to their optical properties. Starting from the well-known monofunctional amino- and nitro-functionalized UiO-66 derivatives, we introduce novel UiO-66-type MOFs containing bifunctional push-pull 1,4-benzenedicarboxylate (bdc) linkers. The successful synthesis of such a novel UiO-66 derivative is also reported. It was carried out using a para-nitroaniline (PNA)-based bdc-analogue linker. Applying density functional theory (DFT), suitable models for all UiO-66-MOF analogues were generated by assessing different exchange-correlation functionals. Afterwards, HSE06 hybrid functional calculations were performed to obtain the electronic structures and optical properties. The detailed HSE06 electronic structure calculations were validated with UV-Vis measurements to ensure reliable results. Finally, the refractive index dispersion of the seven UiO-66-type materials is compared, showing the possibility to tailor the optical properties by the use of functionalized linker molecules. Specifically, the refractive index can be varied over a wide range from 1.37 to 1.78.

Correction: Tuning the optical properties of the metal-organic framework UiO-66 via ligand functionalization.

Correction for 'Tuning the optical properties of the metal-organic framework UiO-66 via ligand functionalization' by Marvin Treger et al., Phys. Chem. Chem. Phys., 2023, 25, 6333-6341, https://doi.org/10.1039/D2CP03746G.

Influence of PEG Chain Length of Functionalized Magnetic Nanoparticles on the Cytocompatibility and Immune Competence of Primary Murine Macrophages and Dendritic Cells.

A major drawback of nanoparticles (NPs) for biomedical applications is their preferential phagocytosis in immune cells, which can be avoided by surface modifications like PEGylation. Nevertheless, examinations of different polyethylene glycol (PEG) chain lengths on the competence of immune cells as well as possible immunotoxic effects are still sparse. Therefore, primary murine macrophages and dendritic cells were generated and incubated with magnetic nanoporous silica nanoparticles (MNPSNPs) modified with different mPEG chains (2 kDa, 5 kDa, and 10 kDa). Cytotoxicity, cytokine release, and the formation of reactive oxygen species (ROS) were determined. Immune competence of both cell types was examined and uptake of MNPSNPs into macrophages was visualized. Concentrations up to 150 µg/mL MNPSNPs showed no effects on the metabolic activity or immune competence of both cell types. However, ROS significantly increased in macrophages incubated with larger PEG chains, while the concentration of cytokines (TNF-α and IL-6) did not indicate a proinflammatory process. Investigations on the uptake of MNPSNPs revealed no differences in the onset of internalization and the intensity of intracellular fluorescence. The study gives no indication for an immunotoxic effect of PEGylated MNPSNPs. Nevertheless, there is still a need for optimization regarding their internalization to ensure an efficient drug delivery.

Postsynthetic Photochemical Modification and 2D Structuring of Zr-MOF Thin Films Containing Benzophenone Linker Molecules.

For the fabrication of next-generation MOF-based devices the availability of highly adaptable materials in suitable shapes is crucial. Here, we present thin films of a metal-organic framework (MOF) containing photoreactive benzophenone units. Crystalline, oriented and porous films of the zirconium-based bzpdc-MOF (bzpdc=benzophenone-4-4'-dicarboxylate) are prepared by direct growth on silicon or glass substrates. Via a subsequent photochemical modification of the Zr-bzpdc-MOF films, various properties can be tuned postsynthetically by covalent attachment of modifying agents. Apart from the modification with small molecules, also grafting-from polymerization reactions are possible. In a further extension, 2D structuring and photo-writing of defined structures is also possible, for example by using a photolithographic approach, paving the way towards micro-patterned MOF surfaces.

Layer-by-Layer Deposition of 2D CdSe/CdS Nanoplatelets and Polymers for Photoluminescent Composite Materials.

Two-dimensional (2D) semiconductor nanoplatelets (NPLs) are strongly photoluminescent materials with interesting properties for optoelectronics. Especially their narrow photoluminescence paired with a high quantum yield is promising for light emission applications with high color purity. However, retaining these features in solid-state thin films together with an efficient encapsulation of the NPLs is a challenge, especially when trying to achieve high-quality films with a defined optical density and low surface roughness. Here, we show photoluminescent polymer-encapsulated inorganic-organic nanocomposite coatings of 2D CdSe/CdS NPLs in poly(diallyldimethylammonium chloride) (PDDA) and poly(ethylenimine) (PEI), which are prepared by sequential layer-by-layer (LbL) deposition. The electrostatic interaction between the positively charged polyelectrolytes and aqueous phase-transferred NPLs with negatively charged surface ligands is used as a driving force to achieve self-assembled nanocomposite coatings with a well-controlled layer thickness and surface roughness. Increasing the repulsive forces between the NPLs by increasing the pH value of the dispersion leads to the formation of nanocomposites with all NPLs arranging flat on the substrate, while the surface roughness of the 165 nm (50 bilayers) thick coating decreases to Ra = 14 nm. The photoluminescence properties of the nanocomposites are determined by the atomic layer thickness of the NPLs and the 11-mercaptoundecanoic acid ligand used for their phase transfer. Both the full width at half-maximum (20.5 nm) and the position (548 nm) of the nanocomposite photoluminescence are retained in comparison to the colloidal CdSe/CdS NPLs in aqueous dispersion, while the measured photoluminescence quantum yield of 5% is competitive to state-of-the-art nanomaterial coatings. Our approach yields stable polymer-encapsulated CdSe/CdS NPLs in smooth coatings with controllable film thickness, rendering the LbL deposition technique a powerful tool for the fabrication of solid-state photoluminescent nanocomposites.

The lack of retropatellar resurfacing at index surgery is significantly associated with failure in patients following patellofemoral inlay arthroplasty: a multi-center study of more than 260 patients.

PURPOSE: To evaluate the clinical outcomes of patients with a minimum 2-year follow-up following contemporary patellofemoral inlay arthroplasty (PFIA) and to identify potential risk factors for failure in a multi-center study. METHODS: All patients who underwent implantation of PFIA between 09/2009 and 11/2016 at 11 specialized orthopedic referral centers were enrolled in the study and were evaluated retrospectively at a minimum 2-year follow-up. Clinical outcomes included the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, the Knee Injury and Osteoarthritis Outcome Score (KOOS), the Tegner Scale, the visual analogue scale (VAS) for pain, and subjective patient satisfaction. Pre- and perioperative risk factors were compared among failures and non-failures to determine potential risk factors. RESULTS: A total of 263 patients (85% follow-up rate) could be enrolled. The mean age at the time of index surgery was 49 ± 12 years with a mean postoperative follow-up of 45 ± 18 months. The overall failure rate was 11% (28 patients), of which 18% (5 patients) were patients with patella resurfacing at index surgery and 82% (23 patients) were patients without initial patella resurfacing. At final follow-up, 93% of the patients who did not fail were satisfied with the procedure with a mean transformed WOMAC Score of 84.5 ± 14.5 points, a mean KOOS Score of 73.3 ± 17.1 points, a mean Tegner Score of 3.4 ± 1.4 points and a mean VAS pain of 2.4 ± 2.0 points. An increased BMI was significantly correlated with a worse postoperative outcome. Concomitant procedures addressing patellofemoral instability or malalignment, the lack of patellofemoral resurfacing at the index surgery and a high BMI were significantly correlated with failure in our patient cohort. CONCLUSION: Patellofemoral inlay arthroplasty shows high patient satisfaction with good functional outcomes at short-term follow-up and thus can be considered a viable treatment option in young patients suffering from isolated patellofemoral arthritis. Patellar resurfacing at index surgery is recommended to decrease the risk of failure. LEVEL OF EVIDENCE: Retrospective case series, Level IV.

Inside/Outside: Post-Synthetic Modification of the Zr-Benzophenonedicarboxylate Metal-Organic Framework.

The Zr-based metal-organic framework, Zr-bzpdc-MOF, contains the photoreactive linker molecule benzophenone-4,4'-dicarboxylate (bzpdc) which imparts the possibility for photochemical post-synthetic modification. Upon irradiation with UV light, the keto group of the benzophenone moiety will react with nearly every C-H bond-containing molecule. Within this paper, we further explore the photochemical reactivity of the Zr-bzpdc-MOF, especially with regard to which restrictions govern internal versus external reactions. We show that apart from reactions with C-H bond-containing molecules, the MOF reacts also with water. By studying the reactivity versus linear alcohols we find a clear delineation in that shorter alcohol molecules (up to butanol as a borderline case) react with photoexcited keto groups throughout the whole crystals whereas longer ones react only with surface-standing keto groups. In addition, we show that with the alkanes n-butane to n-octane, the reaction is restricted to the outer surface. We hypothesize that the reactivity of the Zr-bzpdc-MOF versus different reagents depends on the accessibility of the pore system which in turn depends mainly on the size of the reagents and on their polarity. The possibility to direct the post-synthetic modification of the Zr-bzpdc-MOF (selective modification of the whole pore system versus surface modification) gives additional degrees of freedom in the design of this metal-organic framework for shaping and for applications.

Biodistribution, biocompatibility and targeted accumulation of magnetic nanoporous silica nanoparticles as drug carrier in orthopedics.

BACKGROUND: In orthopedics, the treatment of implant-associated infections represents a high challenge. Especially, potent antibacterial effects at implant surfaces can only be achieved by the use of high doses of antibiotics, and still often fail. Drug-loaded magnetic nanoparticles are very promising for local selective therapy, enabling lower systemic antibiotic doses and reducing adverse side effects. The idea of the following study was the local accumulation of such nanoparticles by an externally applied magnetic field combined with a magnetizable implant. The examination of the biodistribution of the nanoparticles, their effective accumulation at the implant and possible adverse side effects were the focus. In a BALB/c mouse model (n = 50) ferritic steel 1.4521 and Ti90Al6V4 (control) implants were inserted subcutaneously at the hindlimbs. Afterwards, magnetic nanoporous silica nanoparticles (MNPSNPs), modified with rhodamine B isothiocyanate and polyethylene glycol-silane (PEG), were administered intravenously. Directly/1/7/21/42 day(s) after subsequent application of a magnetic field gradient produced by an electromagnet, the nanoparticle biodistribution was evaluated by smear samples, histology and multiphoton microscopy of organs. Additionally, a pathohistological examination was performed. Accumulation on and around implants was evaluated by droplet samples and histology. RESULTS: Clinical and histological examinations showed no MNPSNP-associated changes in mice at all investigated time points. Although PEGylated, MNPSNPs were mainly trapped in lung, liver, and spleen. Over time, they showed two distributional patterns: early significant drops in blood, lung, and kidney and slow decreases in liver and spleen. The accumulation of MNPSNPs on the magnetizable implant and in its area was very low with no significant differences towards the control. CONCLUSION: Despite massive nanoparticle capture by the mononuclear phagocyte system, no significant pathomorphological alterations were found in affected organs. This shows good biocompatibility of MNPSNPs after intravenous administration. The organ uptake led to insufficient availability of MNPSNPs in the implant region. For that reason, among others, the nanoparticles did not achieve targeted accumulation in the desired way, manifesting future research need. However, with different conditions and dimensions in humans and further modifications of the nanoparticles, this principle should enable reaching magnetizable implant surfaces at any time in any body region for a therapeutic reason.

Implant-based direction of magnetic nanoporous silica nanoparticles - influence of macrophage depletion and infection.

Implant associated infections are still key problem in surgery. In the present study, the combination of a magnetic implant with administered magnetic nanoporous silica nanoparticles as potential drug carriers was examined in mice in dependence of local infection and macrophages as influencing factors. Four groups of mice (with and without implant infection and with and without macrophage depletion) received a magnet on the left and a titanium control on the right hind leg. Then, fluorescent nanoparticles were administered and particle accumulations at implant surfaces and in inner organs as well as local tissue reactions were analyzed. Magnetic nanoparticles could be found at the surfaces of magnetic implants in different amounts depending on the treatment groups and only rarely at titanium surfaces. Different interactions of magnetic implants, particles, infection and surrounding tissues occurred. The general principle of targeted accumulation of magnetic nanoparticles could be proven.

Stability and Biological Activity of E. coli Derived Soluble and Precipitated Bone Morphogenetic Protein-2.

PURPOSE: There is a plethora of studies on recombinant human bone morphogenetic protein-2 (rhBMP-2) application and delivery systems, but surprisingly few reports address the biophysical properties of the protein which are of crucial importance to develop effective delivery systems or to solve general problems related to rhBMP-2 production, purification, analysis and application. METHODS: The solubility, stability and bioactivity of rhBMP-2 obtained by renaturation of E. coli derived inclusion bodies was assessed at different pH and in different buffer systems using (dynamic) light scattering and thermal shift assays as well as intrinsic fluorescence measurements and luciferase based bioassays. RESULTS: rhBMP-2 is poorly soluble at physiological pH and higher. The presence of divalent anions further decreases the solubility even under acidic conditions. Thermal stability analyses revealed that rhBMP-2 precipitates are more stable compared to the soluble protein. Moreover, correctly folded rhBMP-2 is also bioactive as precipitated protein and precipitates readily dissolve under appropriate buffer conditions. Once properly formed rhBMP-2 also retains biological activity after temporary exposure to high concentrations of chaotropic denaturants. However, care should be taken to discriminate bioactive rhBMP-2 precipitates from misfolded rhBMP-2 aggregates, e.g. resolvability in MES buffer (pH 5) and a discrete peak in thermoshift experiments are mandatory for correctly folded rhBMP-2. CONCLUSIONS: Our analysis revealed that E. coli derived rhBMP-2 precipitates are not only bioactive but are also more stable compared to the soluble dimeric molecules. Knowledge about these unusual properties will be helpful to design improved delivery systems requiring lower amounts of rhBMP-2 in clinical applications.

Delamination and Photochemical Modification of a Novel Two-Dimensional Zr-Based Metal-Organic Frameworks.

In this contribution we present a novel two-dimensional Zr-based metal-organic framework (MOF) which offers the possibility for delamination and post-synthetic photochemical modification at the linker molecule derived from benzophenone-4,4'-dicarboxylic acid (H2 bzpdc). The new Zr-bzpdc-MOF crystallizes in the orthorhombic system as crystals with rhombic shape. The structure was determined from single-crystal diffraction data. The MOF is stable up to 300 °C in air and exhibits a moderate BET surface area of 650 m2 g-1 . The material can be obtained as thin sheets of a few nanometer thickness. Single crystals were modified post-synthetically, exploiting the intrinsic reactivity of the benzophenone group with C-H bond containing molecules. In this way, the surface properties of the MOF crystals (e.g., dispersibility in different solvents) can be changed drastically. Delamination and adaptation of the surface chemistry open up novel ways for shaping MOFs, for example, for the incorporation into polymer composites, and pave the way for various applications.

Postsynthetic Modification of Metal-Organic Frameworks through Nitrile Oxide-Alkyne Cycloaddition.

Postsynthetic modification of metal-organic frameworks is an important method to tailor their properties. We report on the nitrile oxide-alkyne cycloaddition (NOAC) as a modification tool, a reaction requiring neither strained alkynes nor a catalyst. This is demonstrated with the reaction of nitrile oxides with PEPEP-PIZOF-15 and -19 at room temperature. PIZOF-15 and -19 are porous Zr-based MOFs (BET surface areas 1740 and 960 m2 g-1, respectively) consisting of two mutually interpenetrating UiO-type frameworks with linkers of the type -O2C[PE-P(R1,R2)-EP]CO2- (P, phenylene; E, ethynylene; R1 and R2, side chains at the central benzene ring with R1 = R2 = OCH2C≡CH or R1 = OCH2C≡CH and R2 = O(CH2CH2O)3Me). Their syntheses, using benzoic acid as a modulator, and their characterization are reported herein. The propargyloxy (OCH2C≡CH) side chains contain the ethyne moieties needed for NOAC. Formation of nitrile oxides through oxidation of oximes in aqueous ethanolic solution in the presence of PEPEP-PIZOF-15 and -19 resulted in the reaction of 96-100% of the ethyne moieties to give isoxazoles. Thereby the framework was preserved. The type of nitrile oxide RCNO was greatly varied with R being isopentyl, tolyl, 2-pyridyl, and pentafluorophenyl. A detailed NMR spectroscopic investigation showed the formation of the 3,5-disubstituted isoxazole to be clearly favored (≥96%) over that of the constitutional isomeric 3,4-disubstituted isoxazole, except for one example.

In vitro and in vivo accumulation of magnetic nanoporous silica nanoparticles on implant materials with different magnetic properties.

BACKGROUND: In orthopedic surgery, implant-associated infections are still a major problem. For the improvement of the selective therapy in the infection area, magnetic nanoparticles as drug carriers are promising when used in combination with magnetizable implants and an externally applied magnetic field. These implants principally increase the strength of the magnetic field resulting in an enhanced accumulation of the drug loaded particles in the target area and therewith a reduction of the needed amount and the risk of undesirable side effects. In the present study magnetic nanoporous silica core-shell nanoparticles, modified with fluorophores (fluorescein isothiocyanate/FITC or rhodamine B isothiocyanate/RITC) and poly(ethylene glycol) (PEG), were used in combination with metallic plates of different magnetic properties and with a magnetic field. In vitro and in vivo experiments were performed to investigate particle accumulation and retention and their biocompatibility. RESULTS: Spherical magnetic silica core-shell nanoparticles with reproducible superparamagnetic behavior and high porosity were synthesized. Based on in vitro proliferation and viability tests the modification with organic fluorophores and PEG led to highly biocompatible fluorescent particles, and good dispersibility. In a circular tube system martensitic steel 1.4112 showed superior accumulation and retention of the magnetic particles in comparison to ferritic steel 1.4521 and a Ti90Al6V4 control. In vivo tests in a mouse model where the nanoparticles were injected subcutaneously showed the good biocompatibility of the magnetic silica nanoparticles and their accumulation on the surface of a metallic plate, which had been implanted before, and in the surrounding tissue. CONCLUSION: With their superparamagnetic properties and their high porosity, multifunctional magnetic nanoporous silica nanoparticles are ideal candidates as drug carriers. In combination with their good biocompatibility in vitro, they have ideal properties for an implant directed magnetic drug targeting. Missing adverse clinical and histological effects proved the good biocompatibility in vivo. Accumulation and retention of the nanoparticles could be influenced by the magnetic properties of the implanted plates; a remanent martensitic steel plate significantly improved both values in vitro. Therefore, the use of magnetizable implant materials in combination with the magnetic nanoparticles has promising potential for the selective treatment of implant-associated infections.

Clinical Results and Mechanical Properties of the Carotid CGUARD Double-Layered Embolic Prevention Stent.

PURPOSE: To report early clinical outcomes with a novel double-layer stent for the internal carotid artery (ICA) and the in vitro investigation of the stent's mechanical properties. METHODS: A prospective single-center study enrolled 30 consecutive patients (mean age 73.1±6.3 years; 21 men) with symptomatic (n=25) or high-grade (n=5) ICA stenosis treated with the new double-layer carotid CGUARD Embolic Prevention System (EPS) stent, which has an inner open-cell nitinol design with an outer closed-cell polyethylene terephthalate layer. The average stenosis of the treated arteries was 84.1%±7.9% with a mean lesion length of 16.6±2.1 mm. In the laboratory, 8×40-mm stents where tested in vitro with respect to their radial force during expansion, the bending stiffness of the stent system and the expanded stent, as well as the collapse pressure in a thin and flexible sheath. The wall adaptation was assessed using fluoroscopy after stent release in step and curved vessel models. RESULTS: The stent was successfully implanted in all patients. No peri- or postprocedural complications occurred; no minor or major stroke was observed in the 6-month follow-up. The bending stiffness of the expanded stent was 63.1 N·mm2 and (not unexpectedly) was clearly lower than that of the stent system (601.5 N·mm2). The normalized radial force during expansion of the stent to 7.0 mm, consistent with in vivo sizing, was relatively high (0.056 N/mm), which correlates well with the collapse pressure of 0.17 bars. Vessel wall adaptation was harmonic and caused no straightening of the vessel after clinical application. CONCLUSION: Because of its structure, the novel CGUARD EPS stent is characterized by a high flexibility combined with a high radial force and very good plaque coverage. These first clinical results demonstrate a very safe implantation behavior without any stroke up to 6 months after the procedure.

Expanding the Group of Porous Interpenetrated Zr-Organic Frameworks (PIZOFs) with Linkers of Different Lengths.

A Zr-based MOF of the PIZOF type, which consists of two independent and mutually interpenetrating UiO-type frameworks with [Zr6O4(OH)4(O2C)12] nodes, does not only form with a PEPEP dicarboxylic acid (P = phenylene, E = ethynylene). Also dicarboxylic acids with the shorter PPPP and PEPP spacers were found to give PIZOFs, denoted PPPP-PIZOF and PEPP-PIZOF, respectively. Reducing the spacer length even further to a PEEP segment caused a switchover to the formation of a UiO framework. The hysteresis in the Ar sorption curve of PEPP-PIZOF-1 and the slightly too large amount of combustion residue from PPPP-PIZOF-1 suggest structural defects. These hint at a mismatch between the requirement of the optimal linker length for PIZOF formation and the lengths of the PEPP and PPPP dicarboxylates. Nevertheless, these dicarboxylates prefer the formation of a PIZOF over the formation of a UiO structure. PEPEP-PIZOF-2, PPPP-PIZOF-1, and PEPP-PIZOF-1 are stable in air up to 325, 350, and 300 °C, respectively, and have BET surface areas of 2350, 2020, and 1650 m2 g-1, respectively. PEPEP-PIZOFs, even those with very hydrophilic oligo(ethylene glycol) side chains on the linkers, are very stable in water and also during drying from a water-wetted state. On the contrary, PEPP-PIZOF-1 and PPPP-PIZOF-1 that had been exposed to water required exchange of water for ethanol before drying to mostly preserve the framework. The results emphasize the importance of differentiating between framework damage caused through hydrolysis in water and through drying from a water-wetted state. The sensitivity of PEPP-PIZOF-1 and PPPP-PIZOF-1 against drying from a water-wetted state may be the consequence of defects. The drying stability of water-wetted PEPEP-PIZOFs lets us suggest that reversible bending of the linkers contributes to the stability of the PEPEP-PIZOFs.

Versatile Aerogel Fabrication by Freezing and Subsequent Freeze-Drying of Colloidal Nanoparticle Solutions.

A versatile method to fabricate self-supported aerogels of nanoparticle (NP) building blocks is presented. This approach is based on freezing colloidal NPs and subsequent freeze drying. This means that the colloidal NPs are directly transferred into dry aerogel-like monolithic superstructures without previous lyogelation as would be the case for conventional aerogel and cryogel fabrication methods. The assembly process, based on a physical concept, is highly versatile: cryogelation is applicable for noble metal, metal oxide, and semiconductor NPs, and no impact of the surface chemistry or NP shape on the resulting morphology is observed. Under optimized conditions the shape and volume of the liquid equal those of the resulting aerogels. Also, we show that thin and homogeneous films of the material can be obtained. Furthermore, the physical properties of the aerogels are discussed.