Suppressed-scattering spectral windows for radiative cooling applications.

The scattering of light by resonant nanoparticles is a key process for enhancing the solar reflectance in daylight radiative cooling. Here, we investigate the impact of material dispersion on the scattering performance of popular nanoparticles for radiative cooling applications. We show that, due to material dispersion, nanoparticles with a qualitatively similar response at visible frequencies exhibit fundamentally different scattering properties at infrared frequencies. It is found that dispersive nanoparticles exhibit suppressed-scattering windows, allowing for selective thermal emission within a highly reflective sample. The existence of suppressed-scattering windows solely depends on material dispersion, and they appear pinned to the same wavelength even in random composite materials and periodic metasurfaces. Finally, we investigate calcium-silicate-hydrate (CSH), the main phase of concrete, as an example of a dispersive host, illustrating that the co-design of nanoparticles and host allows for tuning of the suppressed-scattering windows. Our results indicate that controlled nanoporosities would enable concrete with daylight passive radiative cooling capabilities.

Silicon carbide as a material-based high-impedance surface for enhanced absorption within ultra-thin metallic films.

The absorption of infrared radiation within ultra-thin metallic films is technologically relevant for different thermal engineering applications and optoelectronic devices, as well as for fundamental research on sub-nanometer and atomically-thin materials. However, the maximal attainable absorption within an ultra-thin metallic film is intrinsically limited by both its geometry and material properties. Here, we demonstrate that material-based high-impedance surfaces enhance the absorptivity of the films, potentially leading to perfect absorption for optimal resistive layers, and a fourfold enhancement for films at deep nanometer scales. Moreover, material-based high-impedance surfaces do not suffer from spatial dispersion and the geometrical restrictions of their metamaterial counterparts. We provide a proof-of-concept experimental demonstration by using titanium nanofilms on top of a silicon carbide substrate.

Labyrinth Metasurface for Biosensing Applications: Numerical Study on the New Paradigm of Metageometries.

The use of metasurfaces operating in the terahertz regime as biosensor devices has attracted increased interest in recent years due to their enhanced sensitivity and more accurate detection capability. Typical designs are based on the replica of relatively simple unit cells, usually called metaatoms. In a previous paper, we proposed a new paradigm for ultrasensitive thin-film sensors based on complex unit cells, called generically metageometries or labyrinth metasurfaces. Here, we extend this concept towards biosensing, evaluating the performance of the labyrinth as a fungi detector. The sensing capabilities are numerically evaluated and a comparison with previous works in this field is performed, showing that metageometries improve the performance compared to metaatoms both in sensitivity and figure of merit, by a factor of more than four. In particular, we find that it is able to detect five fungi elements scattered on the unit cell, equivalent to a concentration of only 0.004/µm2.

THz Sensing With Anomalous Extraordinary Optical Transmission Hole Arrays.

Subwavelength hole array (HA) metasurfaces support the so-called extraordinary optical transmission (EOT) resonance that has already been exploited for sensing. In this work, we demonstrate the superior performance of a different resonant regime of HA metasurfaces called anomalous EOT, by doing a thorough numerical and experimental study of its ability in thin-film label-free sensing applications in the terahertz (THz) band. A comprehensive analysis using both the regular and anomalous EOT resonances is done by depositing thin layers of dielectric analyte slabs of different thicknesses on the structures in different scenarios. We carry out a detailed comparison and demonstrate that the best sensing performance is achieved when the structure operates in the anomalous EOT resonance and the analyte is deposited on the non-patterned side of the metasurface, improving by a factor between 2 and 3 the results of the EOT resonance in any of the considered scenarios. This can be explained by the comparatively narrower linewidth of the anomalous EOT resonance. The results presented expand the reach of subwavelength HAs for sensing applications by considering the anomalous EOT regime that is usually overlooked in the literature.

Wideband backscattering reduction at terahertz using compound reflection grating.

Backscattering reduction is usually achieved by using either absorbers or diffractions gratings at the expense of a narrow bandwidth. In this paper, we propose a different strategy based on a metallic compound reflection grating (CRG). We demonstrate that this structure allows a strong and broadband (fractional bandwidth, FBW ≈57%) backscattering reduction in the terahertz (THz) range by efficiently transferring the incident energy to the diffracted modes. The design is analyzed in terms of equivalent circuit and numerical simulations and the results are corroborated by a manufactured prototype operating at 0.35 THz.

Multiband one-way polarization conversion in complementary split-ring resonator based structures by combining chirality and tunneling.

Multiband one-way polarization conversion and strong asymmetry in transmission inspired by it are demonstrated in ultrathin sandwiched structures that comprise two twisted aperture-type arrays of complementary split-ring resonators (CSRRs), metallic mesh, and dielectric layers. The basic features of the resulting mechanism originate from the common effect of chirality and tunneling. The emphasis is put on the (nearly) perfect polarization conversion of linear incident polarization into the orthogonal one and related diodelike asymmetric transmission within multiple narrow bands. Desired polarization conversion can be obtained at several resonances for one of the two opposite incidence directions, whereas transmission is fully blocked for the other one. The resonances, at which the (nearly) perfect conversion takes place, are expected to be inherited from similar structures with parallel, i.e., not rotated CSRR arrays that do not enable chirality and, thus, polarization conversion. It is found that the basic transmission and polarization conversion features and, thus, the dominant physics are rather general, enabling efficient engineering of such structures. The lowest-frequency resonance can be obtained in structures made of conventional materials with total thickness less than λ/50 and up to ten such resonances can correspond to thickness less than λ/20.

Experimental demonstration of lossy mode and surface plasmon resonance generation with Kretschmann configuration.

Lossy mode resonances (LMRs) and surface plasmon resonaces (SPRs) are obtained experimentally with a Kretschmann configuration using a BK7 glass prism with all sides polished and coated with indium tin oxide (ITO). The properties of ITO allow for obtaining LMRs and SPRs with the same experimental setup. The results are corroborated with a numerical method for calculation of the reflection in the Kretschmann configuration.

Radiative Cooling Properties of Portlandite and Tobermorite: Two Cementitious Minerals of Great Relevance in Concrete Science and Technology.

Although concrete and cement-based materials are the most engineered materials employed by mankind, their potential for use in daytime radiative cooling applications has yet to be fully explored. Due to its complex structure, which is composed of multiple phases and textural details, fine-tuning of concrete is impossible without first analyzing its most important ingredients. Here, the radiative cooling properties of Portlandite (Ca(OH)2) and Tobermorite (Ca5Si6O16(OH)2·4H2O) are studied due to their crucial relevance in cement and concrete science and technology. Our findings demonstrate that, in contrast to concrete (which is a strong infrared emitter but a poor sun reflector), both Portlandite and Tobermorite exhibit good radiative cooling capabilities. These results provide solid evidence that, with the correct optimization of composition and porosity, concrete can be transformed into a material suitable for daytime radiative cooling.

Terahertz epsilon-near-zero graded-index lens.

An epsilon-near-zero graded-index converging lens with planar faces is proposed and analyzed. Each perfectly-electric conducting (PEC) waveguide comprising the lens operates slightly above its cut-off frequency and has the same length but different cross-sectional dimensions. This allows controlling individually the propagation constant and the normalized characteristic impedance of each waveguide for the desired phase front at the lens output while Fresnel reflection losses are minimized. A complete theoretical analysis based on the waveguide theory and Fermat's principle is provided. This is complemented with numerical simulation results of two-dimensional and three-dimensional lenses, made of PEC and aluminum, respectively, and working in the terahertz regime, which show good agreement with the analytical work.

Impact of high power interference sources in planning and deployment of wireless sensor networks and devices in the 2.4 GHz frequency band in heterogeneous environments.

In this work, the impact of radiofrequency radiation leakage from microwave ovens and its effect on 802.15.4 ZigBee-compliant wireless sensor networks operating in the 2.4 GHz Industrial Scientific Medical (ISM) band is analyzed. By means of a novel radioplanning approach, based on electromagnetic field simulation of a microwave oven and determination of equivalent radiation sources applied to an in-house developed 3D ray launching algorithm, estimation of the microwave oven’s power leakage is obtained for the complete volume of an indoor scenario. The magnitude and the variable nature of the interference is analyzed and the impact in the radio link quality in operating wireless sensors is estimated and compared with radio channel measurements as well as packet measurements. The measurement results reveal the importance of selecting an adequate 802.15.4 channel, as well as the Wireless Sensor Network deployment strategy within this type of environment, in order to optimize energy consumption and increase the overall network performance. The proposed method enables one to estimate potential interference effects in devices operating within the 2.4 GHz band in the complete scenario, prior to wireless sensor network deployment, which can aid in achieving the most optimal network topology.

Tenderness of PGI "Ternera de Navarra" Beef Samples Determined by FTIR-MIR Spectroscopy.

Understanding meat quality attribute changes during ageing by using non-destructive techniques is an emergent pursuit in the agroindustry research field. Using beef certified samples from the protected geographical indication (PGI) "Ternera de Navarra", the primary goal of this study was to use Fourier transform infrared spectroscopy on the middle infrared region (FTIR-MIR) as a tool for the examination of meat tenderness evolution throughout ageing. Samples of the longissimus dorsi muscle of twenty young bulls were aged for 4, 6, 11, or 18 days at 4 °C. Animal carcass classification and sample proximate analysis were performed to check sample homogeneity. Raw aged steaks were analyzed by FTIR-MIR spectroscopy (4000-400 cm-1) to record the vibrational spectrum. Texture profile analysis was performed using a multiple compression test (compression rates of 20%, 80%, and 100%). Compression values were found to decrease notably between the fourth and sixth day of ageing for the three compression rates studied. This tendency continued until the 18th day for C20. For C80 and C100, there was not a clear change in the 11th and 18th days of the study. Regarding FTIR-MIR as a prediction method, it achieved an R2 lower than 40%. Using principal component analysis (PCA) of the results, the whole spectrum fingerprint was used in the discrimination of the starting and final ageing days with correct maturing time classifications. Combining the PCA treatment together with the discriminant analysis of spectral data allowed us to differentiate the samples between the initial and the final ageing points, but it did not single out the intermediate points.

Dual-band double-negative-index fishnet metamaterial at millimeter-waves.

An effective negative refractive index (NRI) is demonstrated and experimentally verified for the first two propagation bands of a fishnet-like metamaterial at millimeter-wave frequencies. The dual-band NRI behavior is achieved by engineering the diffraction order (±1, ±1) associated with the internal mode supported between holey layers to correspond with the second propagation band. In addition to the experimental interferometric technique that accounts for the handedness of the propagation, numerical results are given to predict the dual-band effective NRI and to confirm dual-band negative refraction for a prism composed of the proposed metamaterial.

Estimation of Fatty Acids in Intramuscular Fat of Beef by FT-MIR Spectroscopy.

The aim of this research was to estimate the fatty acid (FA) content of intramuscular fat from beef by Fourier transform mid-infrared (FT-MIR) spectroscopy. Four diets were supplemented in 10% linseed (LS) and/or 2% conjugated linoleic acid (CLA): CON (without L or CLA), LS, CLA, and LS+CLA. For each diet, 12 young Holstein bulls were allocated. The spectral response of the beef samples was analyzed applying FT-MIR spectroscopy (from 400 to 4000 cm-1) and predictive models were developed using partial least square regression with cross-validation. The obtained coefficients (R 2) for some FA, such as α-linolenic acid with a R 2 = 0.96 or n-3 polyunsaturated fatty acids (n-3 PUFA) with R 2 = 0.93, demonstrate that FT-MIR spectroscopy is a valid technique to estimate the content of FA. In addition, samples were correctly classified according to the animal diet using discriminant analysis in the region 3000-1000 cm-1. The obtained results suggest that the FT-MIR spectroscopy could be a viable technique for routine use in quality control because it provides fast and sustainable analysis of FA content. Furthermore, this technique allows the rapid estimation of the FA composition, specifically n-3 PUFA and CLA, of nutritional interest in meat. It also allows the classification of meat samples by the animal diet.

Millimeter-wave phase resonances in compound reflection gratings with subwavelength grooves.

Experimental evidence of phase resonances in a dual-period reflection structure comprising three subwavelength grooves in each period is provided in the millimeter-wave regime. We have analyzed and measured the response of these structures and show that phase resonances are characterized by a minimum in the reflected response, as predicted by numerical calculations. It is also shown that under oblique incidence these structures exhibit additional phase resonances not present for normal illumination because of the potentially permitted odd field distribution. A satisfactory agreement between the experimental and numerical reflectance curves is obtained. These results confirm the recent theoretical predictions of phase resonances in reflection gratings in the millimeter-wave regime, and encourage research in this subject due to the multiple potential applications, such as frequency selective surfaces, backscattering reduction and complex-surface-wave-based sensing. In addition, it is underlined here that the response becomes much more complex than the mere infinite analysis when one considers finite periodic structures as in the real experiment.

Application of MIR Spectroscopy to the Evaluation of Chemical Composition and Quality Parameters of Foal Meat: A Preliminary Study.

The aim of this work was to evaluate the potential of mid-infrared spectroscopy to evaluate the chemical composition and quality parameters of foal meat according to differences based on slaughter ages and finishing diets. In addition, the wavelength ranges which contribute to this meat quality differentiation were also determined. Important characteristics as moisture and total lipid content were well predicted using Mid-Infrared Spectroscopy (MIR)with Rv2 values of 82% and 66%, respectively. Regarding fatty acids, the best models were obtained for arachidonic, vaccenic, docosapentaenoic acid (DPA), and docosahexaenoic acid (DHA) with Rv2 values over 65%. Quality parameters, as instrumental colour and texture and sensory attributes did not reach high prediction coefficients (R2). With the spectra data of the region 2198-1118 cm-1, samples were accurately classified according to slaughter age (78%) and finishing diet (72%). This preliminary research shows the potential of MIR spectroscopy as an alternative tool to traditional meat chemical composition methods. Finally, the wavelength range of the spectrum from 2198 to 1118 cm-1 showed good results for classification purposes.

Lipid and Protein Oxidation Marker Compounds in Horse Meat Determined by MIR Spectroscopy.

This work broadens the study of lipid and protein oxidation marker compounds in foal meat, employing the technology of Attenuated Total Reflectance-Fourier Transform Mid-Infrared Spectroscopy (ATR-FT/MIR, shortened in the following as MIR). As a main objective, marker compounds from 23 foals were extracted and their absorbance spectra were measured to establish prediction models (calibration and validation) between them and classical quantification analysis of the compounds. Another objective was to ascertain whether a previous extraction of the marker compounds before executing their MIR analysis is preferable compared to direct MIR measurements on the raw meat samples. In this context, marker compound results (TBARS between 0.4387 and 2.1040, and carbonyls between 4.07 and 4.68) showed more consistent predictive models than the ones achieved using quantitative analysis of the spectra obtained from the raw meat. Lipid oxidation compounds predictive models obtained in this work offered an R2cv of 63.18% and protein oxidation R2cv obtained in this project showed a value of 54.24%. Thus, MIR technology arises as a promising tool to identify and quantify products derived from lipid and protein oxidation in fresh foal meat.

Broadband spoof plasmons and subwavelength electromagnetic energy confinement on ultrathin metafilms.

A complementary split ring resonator (CSRR)-based metallic layer is proposed as a route to mimic surface plasmon polaritons. A numerical analysis of the textured surface is carried out and compared to previous prominent topologies such as metal mesh, slit array, hole array, and Sievenpiper mushroom surfaces, which are studied as well from a transmission line perspective. These well-documented geometries suffer from a narrowband response, alongside, in most cases, metal thickness constraint (usually of the order of lambda/4) and non-subwavelength modal size as a result of the large dimensions of the unit cell (one dimensions is at least of the order of lambda/2). All of these limitations are overcome by the proposed CSRR-based surface. Besides, a planar waveguide is proposed as a proof of the potential of this CSRR-based metallic layer for spoof surface plasmon polariton guiding. Fundamental aspects aside, the structure under study is easy to manufacture by simple PCB techniques and it is expected to provide good performance within the frequency band from GHz to THz.

Polarized left-handed extraordinary optical transmission of subterahertz waves.

In this paper we design and measure a metamaterial polarizing device working in the sub-terahertz range. The polarizer is based on a modified version of our previous miniaturized Stacked Hole Array (SHA) structure, an arrangement that combines Extraordinary Optical Transmission (EOT) and Left-Handed Metamaterial (LHM) propagation even under Fresnel illumination. Here, we use a self complementary screen by connecting the holes of an EOT structure. Importantly, EOT remains and simultaneously total reflection is obtained for the orthogonal component. Moreover, by computing the dispersion diagram, we demonstrate that LHM propagation can be achieved for the principal polarization within the stop band of the orthogonal component, which propagates in other bands as a standard forward wave. Finally, we check our conjectures by measuring the transmission and reflection coefficients of screens milled on a low-loss microwave substrate. Measurements have been taken for 1 to 6 stacked wafers and they show clearly that the stack acts as a polarizer with left-handed characteristic. Our results open the way to design of novel polarization control metamaterials at Terahertz wavelengths.

Extraordinary transmission and left-handed propagation in miniaturized stacks of doubly periodic subwavelength hole arrays.

Metallic plates embedded between dielectric slabs and perforated by rectangular arrays of subwavelength holes with a dense periodicity in one of the directions support extraordinary transmission (ET) phenomena, viz. strong peaks in the transmittance frequency dependence. Stacks of such perforated plates support ET phenomena with propagation along the stack axis that is characterized by the left handed behavior. The incorporation of the dielectric materials and dense periodicity allows significantly reducing the illuminated area of the perforated plate required experimentally to observe the ET phenomena as compared to the areas required in the case of free standing rectangular hole arrays. This facilitates the experimental investigation of ET under excitation in the Fresnel zone of Gaussian beams.

Left-handed extraordinary optical transmission through a photonic crystal of subwavelength hole arrays.

Metamaterial structures are artificial materials that show unconventional electromagnetic properties such as photonic band-gap, extraordinary optical transmission and left-handed propagation. Up to now, relations of photonic crystals and negative refraction have been shown as well as of photonic crystals and sub-wavelength hole arrays. Here we report a left-handed metamaterial engineered by a combination of sub-wavelength hole array plates periodically stacked to form a photonic crystal structure. It is shown the possibility of fine-tuning the metamaterial in order to permit extraordinary optical transmission and left-handed behaviour. Our work demonstrates the feasibility of engineering left-handed metamaterials by just drilling holes in metallic plates and brings together single structure photonic crystals, extraordinary optical transmission and left-handed behaviour.