Magnetospira thiophila gen. nov., sp. nov., a marine magnetotactic bacterium that represents a novel lineage within the Rhodospirillaceae (Alphaproteobacteria).

A marine, magnetotactic bacterium, designated strain MMS-1(T), was isolated from mud and water from a salt marsh in Woods Hole, Massachusetts, USA, after enrichment in defined oxygen-concentration/redox-gradient medium. Strain MMS-1(T) is an obligate microaerophile capable of chemoorganoheterotrophic and chemolithoautotrophic growth. Optimal growth occurred at pH 7.0 and 24-26 °C. Chemolithoautotrophic growth occurred with thiosulfate as the electron donor and autotrophic carbon fixation was via the Calvin-Benson-Bassham cycle. The G+C content of the DNA of strain MMS-1(T) was 47.2 mol%. Cells were Gram-negative and morphologically variable, with shapes that ranged from that of a lima bean to fully helical. Cells were motile by means of a single flagellum at each end of the cell (amphitrichous). Regardless of whether grown in liquid or semi-solid cultures, strain MMS-1(T) displayed only polar magnetotaxis and possessed a single chain of magnetosomes containing elongated octahedral crystals of magnetite, positioned along the long axis of the cell. Phylogenetic analysis based on 16S rRNA gene sequences indicated that strain MMS-1(T) belongs to the family Rhodospirillaceae within the Alphaproteobacteria, and is distantly related to species of the genus Magnetospirillum. Strain MMS-1(T) is therefore considered to represent a novel species of a new genus, for which the name Magnetospira thiophila gen. nov., sp. nov. is proposed. The type strain of Magnetospira thiophila is MMS-1(T) ( = ATCC BAA-1438(T) = JCM 17960(T)).

A ubiquitous thermoacidophilic archaeon from deep-sea hydrothermal vents.

Deep-sea hydrothermal vents are important in global biogeochemical cycles, providing biological oases at the sea floor that are supported by the thermal and chemical flux from the Earth's interior. As hot, acidic and reduced hydrothermal fluids mix with cold, alkaline and oxygenated sea water, minerals precipitate to form porous sulphide-sulphate deposits. These structures provide microhabitats for a diversity of prokaryotes that exploit the geochemical and physical gradients in this dynamic ecosystem. It has been proposed that fluid pH in the actively venting sulphide structures is generally low (pH < 4.5), yet no extreme thermoacidophile has been isolated from vent deposits. Culture-independent surveys based on ribosomal RNA genes from deep-sea hydrothermal deposits have identified a widespread euryarchaeotal lineage, DHVE2 (deep-sea hydrothermal vent euryarchaeotic 2). Despite the ubiquity and apparent deep-sea endemism of DHVE2, cultivation of this group has been unsuccessful and thus its metabolism remains a mystery. Here we report the isolation and cultivation of a member of the DHVE2 group, which is an obligate thermoacidophilic sulphur- or iron-reducing heterotroph capable of growing from pH 3.3 to 5.8 and between 55 and 75 degrees C. In addition, we demonstrate that this isolate constitutes up to 15% of the archaeal population, providing evidence that thermoacidophiles may be key players in the sulphur and iron cycling at deep-sea vents.

Impact of growth environment and physiological state on metal immobilization by Pseudomonas aeruginosa PAO1.

Environmental growth conditions and cell physiology have the potential to influence bacterial surface-metal interactions in both planktonic and biofilm systems. Here, Pseudomonas aeruginosa was studied to determine the influence of these factors (pH, redox potential, and active respiration) on surface electrostatics and metal immobilization. Acid-base titrations revealed a decrease in ionizable ligands at pKa 5 (putative carboxyls) in cells grown below pH 6.2 and in cells grown anaerobically relative to cells grown under oxic and circumneutral pH conditions. This observation correlates with Western immunoblotting assays that revealed a reduction in carboxylated B-band lipopolysaccharide in these cells. Furthermore, spectrophotometric analysis revealed a decrease in zinc, copper, and iron immobilization in these cells, suggesting that lipopolysaccharide modification in response to environmental stimuli influences metal binding. The effect of active versus inactive metabolism on metal adsorption was also examined using respiration inhibitors carbonyl cyanide m-chlorophenylhydrazone and sodium azide. Cells treated with these compounds bound more zinc, copper, and iron than untreated controls, suggesting proton extrusion through respiration competes with metal cations for reactive groups on the cell surface. Accumulation of gold did not show the same trend, and transmission electron microscopy studies confirmed it was not a surface-mediated process. These results suggest that variations in growth environment and cell physiology influence metal accumulation by bacterial cell surfaces and may help to explain discontinuous accumulation of metal observed throughout microbial communities.

Absolute quantitation of bacterial biofilm adhesion and viscoelasticity by microbead force spectroscopy.

Bacterial biofilms are the most prevalent mode of bacterial growth in nature. Adhesive and viscoelastic properties of bacteria play important roles at different stages of biofilm development. Following irreversible attachment of bacterial cells onto a surface, a biofilm can grow in which its matrix viscoelasticity helps to maintain structural integrity, determine stress resistance, and control ease of dispersion. In this study, a novel application of force spectroscopy was developed to characterize the surface adhesion and viscoelasticity of bacterial cells in biofilms. By performing microbead force spectroscopy with a closed-loop atomic force microscope, we accurately quantified these properties over a defined contact area. Using the model gram-negative bacterium Pseudomonas aeruginosa, we observed that the adhesive and viscoelastic properties of an isogenic lipopolysaccharide mutant wapR biofilm were significantly different from those measured for the wild-type strain PAO1 biofilm. Moreover, biofilm maturation in either strain also led to prominent changes in adhesion and viscoelasticity. To minimize variability in force measurements resulting from experimental parameter changes, we developed standardized conditions for microbead force spectroscopy to enable meaningful comparison of data obtained in different experiments. Force plots measured under standard conditions showed that the adhesive pressures of PAO1 and wapR early biofilms were 34 +/- 15 Pa and 332 +/- 47 Pa, respectively, whereas those of PAO1 and wapR mature biofilms were 19 +/- 7 Pa and 80 +/- 22 Pa, respectively. Fitting of creep data to a Voigt Standard Linear Solid viscoelasticity model revealed that the instantaneous and delayed elastic moduli in P. aeruginosa were drastically reduced by lipopolysaccharide deficiency and biofilm maturation, whereas viscosity was decreased only for biofilm maturation. In conclusion, we have introduced a direct biophysical method for simultaneously quantifying adhesion and viscoelasticity in bacterial biofilms under native conditions. This method could prove valuable for elucidating the contribution of genetic backgrounds, growth conditions, and environmental stresses to microbial community physiology.

Interactions of DNA with biofilm-derived membrane vesicles.

The biofilm matrix contributes to the chemistry, structure, and function of biofilms. Biofilm-derived membrane vesicles (MVs) and DNA, both matrix components, demonstrated concentration-, pH-, and cation-dependent interactions. Furthermore, MV-DNA association influenced MV surface properties. This bears consequences for the reactivity and availability for interaction of matrix polymers and other constituents.

The N-acetylmannosamine transferase catalyzes the first committed step of teichoic acid assembly in Bacillus subtilis and Staphylococcus aureus.

There have been considerable strides made in the characterization of the dispensability of teichoic acid biosynthesis genes in recent years. A notable omission thus far has been an early gene in teichoic acid synthesis encoding the N-acetylmannosamine transferase (tagA in Bacillus subtilis; tarA in Staphylococcus aureus), which adds N-acetylmannosamine to complete the synthesis of undecaprenol pyrophosphate-linked disaccharide. Here, we show that the N-acetylmannosamine transferases are dispensable for growth in vitro, making this biosynthetic enzyme the last dispensable gene in the pathway, suggesting that tagA (or tarA) encodes the first committed step in wall teichoic acid synthesis.

Differential lipopolysaccharide core capping leads to quantitative and correlated modifications of mechanical and structural properties in Pseudomonas aeruginosa biofilms.

Bacterial biofilms are responsible for the majority of all microbial infections and have profound impact on industrial and geochemical processes. While many studies documented phenotypic differentiation and gene regulation of biofilms, the importance of their structural and mechanical properties is poorly understood. Here we investigate how changes in lipopolysaccharide (LPS) core capping in Pseudomonas aeruginosa affect biofilm structure through modification of adhesive, cohesive, and viscoelastic properties at an early stage of biofilm development. Microbead force spectroscopy and atomic force microscopy were used to characterize P. aeruginosa biofilm interactions with either glass substrata or bacterial lawns. Using isogenic migA, wapR, and rmlC mutants with defined LPS characteristics, we observed significant changes in cell mechanical properties among these strains compared to wild-type strain PAO1. Specifically, truncation of core oligosaccharides enhanced both adhesive and cohesive forces by up to 10-fold, whereas changes in instantaneous elasticity were correlated with the presence of O antigen. Using confocal laser scanning microscopy to quantify biofilm structural changes with respect to differences in LPS core capping, we observed that textural parameters varied with adhesion or the inverse of cohesion, while areal and volumetric parameters were linked to adhesion, cohesion, or the balance between them. In conclusion, this report demonstrated for the first time that changes in LPS expression resulted in quantifiable cellular mechanical changes that were correlated with structural changes in bacterial biofilms. Thus, the interplay between architectural and functional properties may be an important contributor to bacterial community survival.

Ecophysiology of "Halarsenatibacter silvermanii" strain SLAS-1T, gen. nov., sp. nov., a facultative chemoautotrophic arsenate respirer from salt-saturated Searles Lake, California.

Searles Lake occupies a closed basin harboring salt-saturated, alkaline brines that have exceptionally high concentrations of arsenic oxyanions. Strain SLAS-1(T) was previously isolated from Searles Lake (R. S. Oremland, T. R. Kulp, J. Switzer Blum, S. E. Hoeft, S. Baesman, L. G. Miller, and J. F. Stolz, Science 308:1305-1308, 2005). We now describe this extremophile with regard to its substrate affinities, its unusual mode of motility, sequenced arrABD gene cluster, cell envelope lipids, and its phylogenetic alignment within the order Halanaerobacteriales, assigning it the name "Halarsenatibacter silvermanii" strain SLAS-1(T). We also report on the substrate dynamics of an anaerobic enrichment culture obtained from Searles Lake that grows under conditions of salt saturation and whose members include a novel sulfate reducer of the order Desulfovibriales, the archaeon Halorhabdus utahensis, as well as a close homolog of strain SLAS-1(T).

Characterization of the cell surface glycolipid from Spirochaeta aurantia.

Spirochaeta aurantia is a free-living saprophytic spirochete that grows easily in simple laboratory media, and thus can be used as a model for the investigation of surface carbohydrate structures in spirochetae, which are normally not available in sufficient amounts. Freeze-substitution electron microscopy indicated the presence of a capsule-like material projecting from the surface of S. aurantia. Extraction of cells gave two major glycolipids, the one with a higher molecular mass glycolipid was designated large glycolipid A (LGLA). LGLA contained small amount of branched and unsaturated O-linked fatty acids, L: -rhamnose, L: -fucose, D: -xylose, D: -mannose, D: -glucosamine, D: -glycero-D: -gluco-heptose (DDglcHep), D: -glycero-D: -manno-heptose (DDHep), and a novel branched tetradeoxydecose monosaccharide, which we proposed to call aurantose (Aur). The carbohydrate structure of LGLA was extremely complex and consisted of the repeating units built of 11 monosaccharides, arrangement of nine of them was determined as: - [- 3 - beta - DDglcHep - 3 - beta - D - GlcNAc - 2 - beta - D - Man - ] - which wasdeduced from the NMR and chemical data on the LGLA and its fragments, obtained by various degradations. Tentative position of two remaining sugars is proposed. LGLA was negative for gelation of Limulus amebocyte lysate, did not contain lipid A, and was unable to activate any known Toll-like receptors.

Intracellular iron minerals in a dissimilatory iron-reducing bacterium.

Among prokaryotes, there are few examples of controlled mineral formation; the formation of crystalline iron oxides and sulfides [magnetite (Fe3O4) or greigite (Fe3S4)] by magnetotactic bacteria is an exception. Shewanella putrefaciens CN32, a Gram-negative, facultative anaerobic bacterium that is capable of dissimilatory iron reduction, produced microscopic intracellular grains of iron oxide minerals during growth on two-line ferrihydrite in a hydrogen-argon atmosphere. The minerals, formed at iron concentrations found in the soil and sedimentary environments where these bacteria are active, could represent an unexplored pathway for the cycling of iron by bacteria.

Lipoteichoic acid is a major component of the Bacillus subtilis periplasm.

Cryo-electron microscopy (cryo-EM) of frozen-hydrated specimens allows high-resolution observation of structures in optimally preserved samples. In gram-positive bacteria, this method reveals the presence of a periplasmic space between the plasma membrane and an often differentiated cell wall matrix. Since virtually nothing is known about the composition of its constituent matter (i.e., the periplasm), it is still unclear what structures (or mechanism) sustain a gram-positive periplasmic space. Here we have used cryo-EM of frozen-hydrated sections in combination with various labels to probe the model gram-positive organism Bacillus subtilis for major periplasmic components. Incubation of cells with positively charged gold nanoparticles showed almost similar levels of gold binding to the periplasm and the cell wall. On cells whose cell walls were enzymatically hydrolyzed (i.e., on protoplasts), a surface diffuse layer extending approximately 30 nm from the membrane was revealed. The thickness and density of this layer were not significantly altered after treatment with a nonspecific protease, whereas it was labeled with anti-lipoteichoic acid (LTA) antibodies conjugated to nanogold. Further, the LTA layer spans most of the thickness of the periplasmic space, which strongly suggests that LTA is a major component of the B. subtilis periplasm.

Surface viscoelasticity of individual gram-negative bacterial cells measured using atomic force microscopy.

The cell envelope of gram-negative bacteria is responsible for many important biological functions: it plays a structural role, it accommodates the selective transfer of material across the cell wall, it undergoes changes made necessary by growth and division, and it transfers information about the environment into the cell. Thus, an accurate quantification of cell mechanical properties is required not only to understand physiological processes but also to help elucidate the relationship between cell surface structure and function. We have used a novel, atomic force microscopy (AFM)-based approach to probe the mechanical properties of single bacterial cells by applying a constant compressive force to the cell under fluid conditions while measuring the time-dependent displacement (creep) of the AFM tip due to the viscoelastic properties of the cell. For these experiments, we chose a representative gram-negative bacterium, Pseudomonas aeruginosa PAO1, and we used regular V-shaped AFM cantilevers with pyramid-shaped and colloidal tips. We find that the cell response is well described by a three-element mechanical model which describes an effective cell spring constant, k(1), and an effective time constant, tau, for the creep deformation. Adding glutaraldehyde, an agent that increases the covalent bonding of the cell surface, produced a significant increase in k(1) together with a significant decrease in tau. This work represents a new attempt toward the understanding of the nanomechanical properties of single bacteria while they are under fluid conditions, which could be of practical value for elucidating, for instance, the biomechanical effects of drugs (such as antibiotics) on pathogens.

Roles of pgaABCD genes in synthesis, modification, and export of the Escherichia coli biofilm adhesin poly-beta-1,6-N-acetyl-D-glucosamine.

The linear homopolymer poly-beta-1,6-N-acetyl-D-glucosamine (beta-1,6-GlcNAc; PGA) serves as an adhesin for the maintenance of biofilm structural stability in diverse eubacteria. Its function in Escherichia coli K-12 requires the gene products of the pgaABCD operon, all of which are necessary for biofilm formation. PgaC is an apparent glycosyltransferase that is required for PGA synthesis. Using a monoclonal antibody directed against E. coli PGA, we now demonstrate that PgaD is also needed for PGA formation. The deletion of genes for the predicted outer membrane proteins PgaA and PgaB did not prevent PGA synthesis but did block its export, as shown by the results of immunoelectron microscopy (IEM) and antibody adsorption assays. IEM also revealed a conditional localization of PGA at the cell poles, the initial attachment site for biofilm formation. PgaA contains a predicted beta-barrel porin and a superhelical domain containing tetratricopeptide repeats, which may mediate protein-protein interactions, implying that it forms the outer membrane secretin for PGA. PgaB contains predicted carbohydrate binding and polysaccharide N-deacetylase domains. The overexpression of pgaB increased the primary amine content (glucosamine) of PGA. Site-directed mutations targeting the N-deacetylase catalytic activity of PgaB blocked PGA export and biofilm formation, implying that N-deacetylation promotes PGA export through the PgaA porin. The results of previous studies indicated that N-deacetylation of beta-1,6-GlcNAc in Staphylococcus epidermidis by the PgaB homolog, IcaB, anchors it to the cell surface. The deletion of icaB resulted in release of beta-1,6-GlcNAc into the growth medium. Thus, covalent modification of beta-1,6-GlcNAc by N-deacetylation serves distinct biological functions in gram-negative and gram-positive species, dictated by cell envelope differences.

Use of atomic force microscopy and transmission electron microscopy for correlative studies of bacterial capsules.

Bacteria can possess an outermost assembly of polysaccharide molecules, a capsule, which is attached to their cell wall. We have used two complementary, high-resolution microscopy techniques, atomic force microscopy (AFM) and transmission electron microscopy (TEM), to study bacterial capsules of four different gram-negative bacterial strains: Escherichia coli K30, Pseudomonas aeruginosa FRD1, Shewanella oneidensis MR-4, and Geobacter sulfurreducens PCA. TEM analysis of bacterial cells using different preparative techniques (whole-cell mounts, conventional embeddings, and freeze-substitution) revealed capsules for some but not all of the strains. In contrast, the use of AFM allowed the unambiguous identification of the presence of capsules on all strains used in the present study, including those that were shown by TEM to be not encapsulated. In addition, the use of AFM phase imaging allowed the visualization of the bacterial cell within the capsule, with a depth sensitivity that decreased with increasing tapping frequency.

Direct identification of a bacterial manganese(II) oxidase, the multicopper oxidase MnxG, from spores of several different marine Bacillus species.

Microorganisms catalyze the formation of naturally occurring Mn oxides, but little is known about the biochemical mechanisms of this important biogeochemical process. We used tandem mass spectrometry to directly analyze the Mn(II)-oxidizing enzyme from marine Bacillus spores, identified as an Mn oxide band with an in-gel activity assay. Nine distinct peptides recovered from the Mn oxide band of two Bacillus species were unique to the multicopper oxidase MnxG, and one peptide was from the small hydrophobic protein MnxF. No other proteins were detected in the Mn oxide band, indicating that MnxG (or a MnxF/G complex) directly catalyzes biogenic Mn oxide formation. The Mn(II) oxidase was partially purified and found to be resistant to many proteases and active even at high concentrations of sodium dodecyl sulfate. Comparative analysis of the genes involved in Mn(II) oxidation from three diverse Bacillus species revealed a complement of conserved Cu-binding regions not present in well-characterized multicopper oxidases. Our results provide the first direct identification of a bacterial enzyme that catalyzes Mn(II) oxidation and suggest that MnxG catalyzes two sequential one-electron oxidations from Mn(II) to Mn(III) and from Mn(III) to Mn(IV), a novel type of reaction for a multicopper oxidase.

Effect of cations on the structure of bilayers formed by lipopolysaccharides isolated from Pseudomonas aeruginosa PAO1.

The asymmetric outer membrane of Gram-negative bacteria contains lipopolysaccharides (LPSs) which contribute significantly to the bacterium's surface properties and play a crucial role in regulating membrane permeability. We report on neutron diffraction studies performed on aligned, self-assembled bilayers of Na-, Ca-, and Mg-salt forms of LPS isolated from Pseudomonas aeruginosa PAO1. From the one-dimensional neutron scattering length density profiles we find that water penetrates Ca2+-LPS bilayers to a lesser extent than either Na+- or Mg2+-LPS bilayers. This differential water penetration could have implications as to how small molecules permeate the outer membrane of Gram-negative bacteria and, possibly, how nonlamellar phases are formed.

Monolayer film behavior of lipopolysaccharide from Pseudomonas aeruginosa at the air-water interface.

Lipopolysaccharide (LPS) is an essential biomacromolecule making up approximately 50% of the outer membrane of gram-negative bacteria. LPS chemistry facilitates cellular barrier and permeability functions and mediates interactions between the cell and its environment. To better understand the local interactions within LPS membranes, the monolayer film behavior of LPS extracted from Pseudomonas aeruginosa, an opportunistic pathogen of medical importance, was investigated by Langmuir film balance. LPS formed stable monolayers at the air-water interface and the measured lateral stresses and modulus (rigidity) of the LPS film in the compressed monolayer region were found to be appreciable. Scaling theories for two-dimensional (2D) polymer chain conformations were used to describe the pi-A profile, in particular, the high lateral stress region suggested that the polysaccharide segments reside at the 2D air-water interface. Although the addition of monovalent and divalent salts caused LPS molecules to adopt a compact conformation at the air-water interface, they did not appear to have any influence on the modulus (rigidity) of the LPS monolayer film under biologically relevant stressed conditions. With increasing divalent salt (CaCl2) content in the subphase, however, there is a progressive reduction of the LPS monolayer's collapse pressure, signifying that, at high concentrations, divalent salts weaken the ability of the membrane to withstand elevated stress. Finally, based on the measured viscoelastic response of the LPS films, we hypothesize that this property of LPS-rich outer membranes of bacteria permits the deformation of the membrane and may consequently protect bacteria from catastrophic structural failure when under mechanical-stress.

Neutron diffraction study of Pseudomonas aeruginosa lipopolysaccharide bilayers.

Lipopolysaccharides (LPSs) are a major class of macromolecules populating the surface of Gram-negative bacteria. They contribute significantly to the bacterium's surface properties and play a crucial role in regulating the permeability of its outer membrane. Here, we report on neutron diffraction studies performed on aligned, self-assembled bilayers of LPS isolated from Pseudomonas aeruginosa PAO1. This LPS system is comprised of a mixture of rough and smooth A-band and B-band LPS, similar to that naturally found in P. aeruginosa. Temperature scans were conducted at various levels of hydration, and the phases adopted by LPS, along with their corresponding transition temperatures, have been identified. Because of LPS's chemical heterogeneity, the gel-to-liquid-crystalline transition was continuous and not abrupt as commonly observed in single-component phospholipid systems. From the construction of one-dimensional scattering length density profiles, we find that water penetrates into the hydrocarbon region up to and including the center of liquid-crystalline LPS bilayers. This permeability to water also extends to bilayers in the continuous phase transition region and could have far-reaching implications as to how small molecules penetrate the outer membrane of Gram-negative bacteria.

Capsule expression regulated by a two-component signal transduction system in Streptococcus iniae.

Streptococcus iniae causes disease in fish and humans and the presence of capsule is associated with virulence. Tn917 transposon mutagenesis was performed to identify capsule-associated genes and a mutant was isolated, with an insertion in a genetic locus encoding a two-component signal transduction system (TCS), which we termed sivS/R. sivS and sivR encode a 506-amino-acid (aa) putative histidine kinase and a 223-aa putative response regulator, respectively. In order to investigate the role of sivS/R, a deletion-insertion mutant was constructed using a PCR ligation technique. Real-time PCR showed that transcription of cpsA, the first gene in the S. iniae capsule operon, was reduced in the mutant, indicating that sivS/R regulates expression of this gene at the transcriptional level. Whole human blood killing assays demonstrated that unlike the parent, the mutant was susceptible to phagocytosis. Transmission electron microscopy showed exopolysaccharide on the surface of the parent strain but not the mutant which showed aberrant asymmetric septae that resulted in clumps of abnormal-shaped cells. Exponential growth rates of the mutant and parent strain were similar, although the mutant exhibited a longer lag phase. We conclude that sivS/R regulates capsule expression, thus affecting the ability to evade phagocytosis.

The structure of the capsular polysaccharide of Shewanella oneidensis strain MR-4.

Capsular polysaccharides were extracted from Shewanella oneidensis strain MR-4, grown on two different culture media. The polysaccharides were analyzed using 1H and 13C NMR spectroscopy, and the following structure of the repeating unit was established: [structure: see text] where the residue of 4-amino-4,6-dideoxy-D-glucose (Qui4N) was substituted with different N-acyl groups depending on the growth media. All monosaccharides are present in the pyranose form. In the PS from cells grown on enriched medium (trypticase soy broth, TSB) aerobically it was N-acylated with 3-hydroxy-3-methylbutyrate (60%) or with 3-hydroxybutyrate (40%), whereas in the PS from cells grown on minimal medium (CDM) aerobically it was acylated mostly with 3-hydroxybutyrate (>90%).