Porosity Centrifuge: Determination of Pore Sizes of Swellable Porous Materials under Hypergravity.

Porous materials are ubiquitous and essential for many processes in nature as well as in industry, and the need to produce them from renewable materials will definitely increase. A prominent example for such a fully recyclable and biogenic porous material is paper, a material that contains macropores formed in between the fibers as well as a large distribution of much finer pores on and within the fiber walls. While the determination of pore sizes is of central importance for the characterization of such materials, their determination is usually only possible with complex methodologies. The determination of pore sizes in the context of water has remained largely unsolved to date, in particular, if water-swellable materials are considered. Here, we introduce a completely new way of determining pore sizes of materials even under swelling conditions. Using a centrifugal device and studying the imbibition of water into paper at various centrifugal forces that oppose the capillary forces, we can access the mean pore size of different paper materials in an experimentally simple fashion. In addition, we can show that the pore size values obtained with our "centrifugal porosimetry" are consistent with the values obtained using other methods, usually much more involved methods. For this purpose, we measure well-characterized translucent macroporous materials using water, ranging from simple glass capillaries to standard filters and nitrocellulose membranes.

Diazo-Based Copolymers for the Wet Strength Improvement of Paper Based on Thermally Induced CH-Insertion Cross-Linking.

We present an alternative to commonly used, but from an environmental point of view, problematic wet strength agents, which are usually added to paper to prevent a loss of mechanical stability and finally disintegrate when they get into contact with water. To this end, diazoester-containing copolymers are generated, which are coated onto paper and by heating to 110-160 °C for short periods of time become activated and form carbene intermediates, which undergo a CH-insertion cross-linking reaction. The process leads to a simultaneous cross-linking of the polymer and its attachment to the cellulose substrate. The immobilization process of copolymers consisting of a hydrophilic matrix based on N,N-dimethylacrylamide and a diazoester-based comonomer to a cellulose model surface and to laboratory-engineered, fibrous paper substrates is investigated as a function of time, temperature, and cross-linker composition. The distribution of the polymer in the fiber network is studied using confocal fluorescence microscopy. Finally, the tensile properties of modified wet and dry eucalyptus sulfate papers are measured to demonstrate the strong effect of the thermally cross-linked copolymers on the wet strength of paper substrates. Initial experiments show that the tensile indices of the modified and wetted paper samples are up to 50 times higher compared to the values measured for unmodified samples. When dry and wet papers coated with the above-described wetting agents are compared, relative wet strengths of over 30% are observed.

Toward Fabrication of Bioactive Papers: Covalent Immobilization of Peptides and Proteins.

Herein, we report a novel two-step method for the covalent, site-directed, and efficient immobilization of proteins on lab-made paper sheets. First, paper fibers were modified with a peptidic anchor comprising enzyme recognition motifs. Four different conjugation strategies for peptide immobilization were evaluated with respect to reproducibility and fiber loading efficiency. After manufacturing of the peptide-preconditioned paper, oriented conjugation of the model protein tGFP containing a C-terminal recognition sequence for either sortase A or microbial transglutaminase was assessed semiquantitatively by fluorescence measurement and inspected by confocal laser scanning microscopy (CLSM). The two enzymes utilized for protein conjugation used the same oligoglycine peptide anchor, and both proved to be suitable for controlled oriented linkage of substrate proteins at physiological conditions.

Reducing Unspecific Protein Adsorption in Microfluidic Papers Using Fiber-Attached Polymer Hydrogels.

Microfluidic paper combines pump-free water transport at low cost with a high degree of sustainability, as well as good availability of the paper-forming cellulosic material, thus making it an attractive candidate for point-of-care (POC) analytics and diagnostics. Although a number of interesting demonstrators for such paper devices have been reported to date, a number of challenges still exist, which limit a successful transfer into marketable applications. A strong limitation in this respect is the (unspecific) adsorption of protein analytes to the paper fibers during the lateral flow assay. This interaction may significantly reduce the amount of analyte that reaches the detection zone of the microfluidic paper-based analytical device (µPAD), thereby reducing its overall sensitivity. Here, we introduce a novel approach on reducing the nonspecific adsorption of proteins to lab-made paper sheets for the use in µPADs. To this, cotton linter fibers in lab-formed additive-free paper sheets are modified with a surrounding thin hydrogel layer generated from photo-crosslinked, benzophenone functionalized copolymers based on poly-(oligo-ethylene glycol methacrylate) (POEGMA) and poly-dimethyl acrylamide (PDMAA). This, as we show in tests similar to lateral flow assays, significantly reduces unspecific binding of model proteins. Furthermore, by evaporating the transport fluid during the microfluidic run at the end of the paper strip through local heating, model proteins can almost quantitatively be accumulated in that zone. The possibility of complete, almost quantitative protein transport in a µPAD opens up new opportunities to significantly improve the signal-to-noise (S/N) ratio of paper-based lateral flow assays.

Light-Controlled Chemoenzymatic Immobilization of Proteins towards Engineering of Bioactive Papers.

Efficient and reliable methods for the generation of bioactive papers are of growing interest in relation to point-of-care testing devices that do not require extensive analytical equipment. Herein, we report the immobilization of functional proteins on paper fibers using a modular chemoenzymatic approach. The synthetic strategy relies on a combination of highly efficient spatially controllable photo-triggered cycloaddition followed by site-specific sortase A-catalyzed transamidation. This site-directed and regiospecific method has allowed unidirectional and covalent immobilization of several proteins displaying different functional properties, with ramifications for application in paper-based diagnostics.

Fluid Flow Programming in Paper-Derived Silica-Polymer Hybrids.

In paper-based devices, capillary fluid flow is based on length-scale selective functional control within a hierarchical porous system. The fluid flow can be tuned by altering the paper preparation process, which controls parameters such as the paper grammage. Interestingly, the fiber morphology and nanoporosity are often neglected. In this work, porous voids are incorporated into paper by the combination of dense or mesoporous ceramic silica coatings with hierarchically porous cotton linter paper. Varying the silica coating leads to significant changes in the fluid flow characteristics, up to the complete water exclusion without any further fiber surface hydrophobization, providing new approaches to control fluid flow. Additionally, functionalization with redox-responsive polymers leads to reversible, dynamic gating of fluid flow in these hybrid paper materials, demonstrating the potential of length scale specific, dynamic, and external transport control.

Studies of a photochromic model system using NMR with ex-situ and in-situ irradiation devices.

The switching behavior of a photochromic model system was investigated in detail via NMR spectroscopy in order to improve understanding of the compound itself and to provide ways to obtain insights into composition trends of a photo switchable (polymeric) material containing spiropyran/merocyanine units. In addition to the classical irradiation performed outside the magnet (ex-situ), a device for irradiation inside the NMR spectrometer (in-situ) was tested. Both setups are introduced, their advantages and disadvantages as well as their limits are described and the setup for future investigations of photochromic materials is suggested. The influence of different sample concentrations, irradiation procedures, and light intensities on the model system was examined as well as the dependence on solvent, temperature, and irradiation wavelengths. Using the recently published LED illumination device, it was even possible to record two-dimensional spectra on this model system with rather short half-life (7 min in DMSO). This way (13) C chemical shifts of the merocyanine form were obtained, which were unknown before. Copyright © 2016 John Wiley & Sons, Ltd.

Cross-Linking Cellulosic Fibers with Photoreactive Polymers: Visualization with Confocal Raman and Fluorescence Microscopy.

The properties of paper sheets can be tuned by adjusting the surface or bulk chemistry using functional polymers that are applied during (online) or after (offline) papermaking processes. In particular, polymers are widely used to enhance the mechanical strength of the wet state of paper sheets. However, the mechanical strength depends not only on the chemical nature of the polymeric additives but also on the distribution of the polymer on and in the lignocellulosic paper. Here, we analyze the photochemical attachment and distribution of hydrophilic polydimethylacrylamide-co-methacrylate-benzophenone P(DMAA-co-MABP) copolymers with defined amounts of photoreactive benzophenone moieties in model paper sheets. Raman microscopy was used for the unambiguous identification of P(DMAA-co-MABP) and cellulose specific bands and thus the copolymer distribution within the cellulose matrix. Two-dimensional Raman spectral maps at the intersections of overlapping cellulose fibers document that the macromolecules only partially surround the cellulose fibers, favor to attach to the fiber surface, and connect the cellulose fibers at crossings. Moreover, the copolymer appears to accumulate preferentially in holes, vacancies, and dips on the cellulose fiber surface. Correlative brightfield, Raman, and confocal laser scanning microscopy finally reveal a reticular three-dimensional distribution of the polymer and show that the polymer is predominately deposited in regions of high capillarity (i.e., in proximity to fine cellulose fibrils). These data provide deeper insights into the effects of paper functionalization with a copolymer and aid in understanding how these agents ultimately influence the local and overall properties of paper.

Pinecone-Inspired Humidity-Responsive Paper Actuators with Bilayer Structure.

Many plant materials in nature have the ability to change their shape to respond to external stimuli, such as humidity or moisture, to ensure their survival or safe seed release. A well-known example for this phenomenon is the pinecone, which is able to open its scales at low humidity due to the specific bilayer structures of the scale. Inspired by this, we developed a novel humidity-driven actuator based on paper. This was realized by the lamination of untreated paper made from eucalyptus fibers to a paper-carboxymethyl cellulose (CMC) composite. As observed, the hygroexpansion of the composite can be easily controlled by the amount of CMC in the impregnated paper sheet, which, thus, controls the morphologic deformation of the paper bilayer. For a more detailed understanding of these novel paper soft robots, we also studied the dynamic water vapor adsorption, polymer distribution and hygroexpansion of the paper-polymer composites. Finally, we applied a geometrically nonlinear finite element model to predict the bending behavior of paper bilayers and compared the results to experimental data. From this, we conclude that due to the complexity of structure of the paper composite, a universal prediction of the hygromorphic behavior is not a trivial matter.

Single-fibre coating and additive manufacturing of multifunctional papers.

Paper-based materials with precisely designed wettabilities show great potential for fluid transport control, separation, and sensing. To tune the wettability of paper, paper sheets are usually modified after the paper manufacturing process. This limits the complexity of the local wettability design. We combined the wettability design of the individual fibres with subsequent paper sheet fabrication through either fibre deposition or fibre printing. Using silica-based cellulose fibre functionalization, the wettability of the paper sheets, containing only one specific fibre type, could be gradually tuned from highly hydrophilic to highly hydrophobic, resulting in water exclusion. The development of a silica-functionalized fibre library containing mesoporous or dense silica coatings, as well as silica with varying precursor compositions, further enabled the variation of the paper wettability and fluid flow. By combining this fibre library with the paper fabrication process by (i) fibre deposition or (ii) fibre printing, the paper wettability architecture and thus the local fibre composition were adjusted without any further processing steps. This enabled the fabrication of papers with wettability integration, such as a wettability pattern or a Janus paper design, containing wettability gradients along the paper sheet cross section. This asymmetric wettability along all three spatial dimensions enabled side-selective oil-water separation.

Preparation and characterization of light-switchable polymer networks attached to solid substrates.

Surface-attached polymer networks that carry light-responsive nitrospiropyran groups in a hydrophilic PDMAA matrix were prepared on planar silicon and glass surfaces and were characterized with respect to their switching behavior under the influence of an external light trigger. Functional polymers bearing light-responsive units as well as photo-cross-linkable benzophenone groups were first synthesized using free radical copolymerization. The number of spiropyran groups in the copolymer was controlled by adjusting the concentration of the respective monomer in the copolymerization feed. The polymer films were prepared by spin-coating the functional polymers from solution and by ultraviolet light (UV)-induced cross-linking utilizing benzophenone photochemistry. On substrates with immobilized benzophenone groups, the complete polymer network is linked to the surface. The dry thickness of the films can be controlled over a wide range from a few nanometers up to more than 1 µm. The integration of such light-switchable organic moieties into a surface-attached polymer network allows one to increase the overall number of light-responsive groups per surface area by adjusting the amount of surface-attached polymer networks. The spiropyran's function in dry (solvent-free) and swollen polymer films can be reversibly switched by UV and visible irradiation. In addition, the switching in water is faster than in the dry state. Therefore, implementing light-responsive spiropyran functions in polymer films linked to solid surfaces could allow for switching of the chemical and optical surface properties in a fast and spatially controlled fashion.

Cross-Linking of Oxidized Hydroxypropyl Cellulose in Paper: Influence of Molecular Weight and Polymer Distribution on Paper Wet Strength Development.

With the overarching aim for the development of sustainable, nontoxic wet strength agents for paper, a novel polymer gel system based on oxidized hydroxypropyl cellulose (keto-HPC) cross-linked with polyamines was investigated in detail to gain a deeper insight into the wet strength mechanism. When applied to paper, this wet strength system significantly increases the relative wet strength by using only low amounts of polymer, and it is therefore comparable with established wet strength agents based on fossil resources, such as polyamidoamine epichlorohydrin resins. With the help of ultrasonic treatment, keto-HPC was degraded with respect to its molecular weight and further cross-linked in paper using polymeric amine-reactive counterparts. The resulting polymer-cross-linked paper mechanical properties were analyzed with respect to the dry and wet tensile strength, respectively. In addition, we analyzed the polymer distribution using fluorescence confocal laser scanning microscopy (CLSM). If high-molecular-weight samples are being used for cross-linking, we do find accumulation of the polymer mainly on the surface of the fibers and at fiber crossing points, accompanied with enhancing strong effects on paper's wet tensile strength. In contrast, if low-molecular-weight (i.e., degraded) keto-HPC is being applied, the macromolecules are capable of entering the inner porous structure of the paper fibers, and almost no accumulation at the fiber crossing points is observed, which also results in a lowered wet paper tensile strength, respectively. This insight into wet strength mechanisms of the keto-HPC/polyamine system can thus lead to new opportunities for the development of alternative biobased wet strength agents where molecular weight dependence of the wet tensile properties allows for a fine tuning of mechanical properties in the wet state.

Chemical Gradients in Polymer-Modified Paper Sheets-Towards Single-Layer Biomimetic Soft Robots.

Biomimetic actuators are typically constructed as functional bi- or multilayers, where actuating and resistance layers together dictate bending responses upon triggering by environmental stimuli. Inspired by motile plant structures, like the stems of the false rose of Jericho (Selaginella lepidophylla), we introduce polymer-modified paper sheets that can act as soft robotic single-layer actuators capable of hygro-responsive bending reactions. A tailored gradient modification of the paper sheet along its thickness entails increased dry and wet tensile strength and allows at the same time for hygro-responsiveness. For the fabrication of such single-layer paper devices, the adsorption behavior of a cross-linkable polymer to cellulose fiber networks was first evaluated. By using different concentrations and drying procedures fine-tuned polymer gradients throughout the thickness can be achieved. Due to the covalent cross-linking of polymer with fibers, these paper samples possess significantly increased dry and wet tensile strength properties. We furthermore investigated these gradient papers with respect to a mechanical deflection during humidity cycling. The highest humidity sensitivity is achieved using eucalyptus paper with a grammage of 150 g m-2 modified with the polymer dissolved in IPA (~13 wt%) possessing a polymer gradient. Our study presents a straightforward approach for the design of novel hygroscopic, paper-based single-layer actuators, which have a high potential for diverse soft robotic and sensor applications.

Controlling Fluorescent Readout in Paper-based Analytical Devices.

Paper is an ideal candidate for the development of new disposable diagnostic devices because it is a low-cost material, allows transport of the liquid on the device by capillary action, and is environmentally friendly. Today, colorimetric analysis is most often used as a detection method for rapid tests (test strips or lateral flow devices) but usually gives only qualitative results and is limited by a relatively high detection threshold. Here, we describe studies using fluorescence as a readout tool for paper-based diagnostics. We study how the optical readout is affected by light transmission, scattering, and fluorescence as a function of paper characteristics such as thickness (grammage), water content, autofluorescence, and paper type/composition. We show that paper-based fluorescence analysis allows better optical readout compared to that of nitrocellulose, which is currently the material of choice in colorimetric assays. To reduce the loss of analyte molecules (e.g., proteins) due to adsorption to the paper surface, we coat the paper fibers with a protein-repellent hydrogel. For this purpose, we use hydrophilic copolymers consisting of N,N-dimethyl acrylamide and a benzophenone-based cross-linker, which are photochemically transformed into a fiber-attached polymer hydrogel on the paper fiber surfaces in situ. We show that the combination of fluorescence detection and the use of a protein-repellent coating enables sensitive paper-based analysis. Finally, the success of the strategy is demonstrated by using a simple LFD application as an example.

A Solvent-Free Approach to Crosslinked Hydrophobic Polymeric Coatings on Paper Using Vegetable Oil.

Hydrophobic coatings are of utmost importance for many applications of paper-based materials. However, to date, most coating methods demand vast amounts of chemicals and solvents. Frequently, fossil-based coating materials are being used and multiple derivatization reactions are often required to obtain desired performances. In this work, we present a solvent-free paper-coating process, where olive oil as the main biogenic component is being used to obtain a hydrophobic barrier on paper. UV-induced thiol-ene photocrosslinking of olive oil was pursued in a solvent-free state at a wavelength of 254 nm without addition of photoinitiator. Optimum reaction conditions were determined in advance using oleic acid as a model compound. Paper coatings based on olive oil crosslinked by thiol-ene reaction reach water contact angles of up to 120°. By means of Fourier transform infrared spectroscopy and differential scanning calorimetry, a successful reaction and the formation of a polymer network within the coating can be proven. These results show that click-chemistry strategies can be used to achieve hydrophobic polymeric paper coatings while keeping the amount of non-biobased chemicals and reaction steps at a minimum.

Tailored oxidation of hydroxypropyl cellulose under mild conditions for the generation of wet strength agents for paper.

Secondary hydroxyl groups of hydroxypropyl cellulose (HPC) are transformed into reactive carbonyl groups selectively via TEMPO-mediated oxidation in the presence of sodium hypochlorite. By using this oxidation protocol, we introduced carbonyl functions in HPC under mild conditions, with a controlled degree of oxidation (DOx) up to 2.5 and a low degradation of the polysaccharide. The effect of the concentration of sodium hypochlorite on the resulting oxidized alcohol groups has been investigated in detail. Oxidized HPC crosslinks spontaneous at room temperature and mild pH-values with a variety of amines to form water stable hydrogels. If applied on lab-made paper sheet, thermally cross-linking this polymer with amines significantly increased the wet tensile strength. The utilization of such wet strength agents could lead to new approaches in terms of recyclability and biodegradability of wet strength agents interesting for a large number of different paper grades.

Cross-Linking Strategies for Fluorine-Containing Polymer Coatings for Durable Resistant Water- and Oil-Repellency.

Functional coatings for application on surfaces are of growing interest. Especially in the textile industry, durable water and oil repellent finishes are of special demand for implementation in the outdoor sector, but also as safety-protection clothes against oil or chemicals. Such oil and chemical repellent textiles can be achieved by coating surfaces with fluoropolymers. As many concerns exist regarding (per)fluorinated polymers due to their high persistence and accumulation capacity in the environment, a durable and resistant coating is essential also during the washing processes of textiles. Within the present study, different strategies are examined for a durable resistant cross-linking of a novel fluoropolymer on the surface of fibers. The monomer 2-((1,1,2-trifluoro-2-(perfluoropropoxy)ethyl)thio)ethyl acrylate, whose fluorinated side-chain is degradable by treatment with ozone, was used for this purpose. The polymers were synthesized via free radical polymerization in emulsion, and different amounts of cross-linking reagents were copolymerized. The final polymer dispersions were applied to cellulose fibers and the cross-linking was induced thermally or by irradiation with UV-light. In order to investigate the cross-linking efficiency, tensile elongation studies were carried out. In addition, multiple washing processes of the fibers was performed and the polymer loss during washing, as well as the effects on oil and water repellency were investigated. The cross-linking strategy paves the way to a durable fluoropolymer-based functional coating and the polymers are expected to provide a promising and sustainable alternative to functional coatings.

Functional paper-based materials for diagnostics.

Functional papers are the subject of extensive research efforts and have already become an irreplaceable part of our modern society. Among other issues, they enable fast and inexpensive detection of a plethora of analytes and simplify laboratory work, for example in medical tests. This article focuses on the molecular and structural fundamentals of paper and the possibilities of functionalization, commercially available assays and their production, as well as on current and future challenges in research in this field.

Polymerizable biomimetic vesicles with controlled local presentation of adhesive functional DOPA groups.

Inspired by strong adhesive properties of mussel footprint proteins, which are largely governed by the presence of dihydroxy-phenylalanine (DOPA) amino acid moieties, we present a novel approach for presenting DOPA groups in a very defined way in order to modulate the adhesion between artificial interfaces. To this end, linear peptide amphiphiles are synthesized with attached DOPA functional groups and a polymerizable diacetylenic tail. The obtained amphiphiles can be coassembled with matrix amphiphiles into vesicles, which can be subsequently stabilized through UV-light-induced solid-state polymerization. Depending on the molar ratio of matrix and adhesive amphiphiles, the vesicles self-assemble into spherical, fibrilar, or planar nanostructures. The adhesive properties of the surface-adsorbed vesicles are evaluated by drop casting them onto a planar solid substrate and performing macroscopic shear tests in contact with a similar substrate. The shear forces are investigated as a function of substrate chemistry, vesicle polymerization conditions, vesicle concentration, and number of adhesive DOPA groups in the interface. Substrate adhesion is enhanced by surface-confined vesicles and greatly depends on the presentation of DOPA groups in the adhesive interface, either as a mono- or multilayer conformation. Because the adhesive structures can be transferred onto substrates from low-viscosity aqueous solution, they may serve as interesting nanoscale gluing pads in future applications, where the high viscosity of polymer-based glues renders the controlled formation of nanoscale adhesion pads difficult.

Entrapment of Hydrophobic Biocides into Cellulose Acetate Nanoparticles by Nanoprecipitation.

This contribution reports an efficient method for the production and use of biocide-loaded cellulose acetate nanoparticles. As well-known model biocides 4-Hexylresorcinol and Triclosan were used for in situ nanoparticle loading during a nanoprecipitation process. We show that the nanoparticle size can be well-controlled by variation of the cellulose acetate concentration during nanoprecipitation. Apart from strong evidence suggesting cellulose acetate particle formation according to a nucleation-aggregation mechanism, we further show that the biocide loading of the particles occurs by a diffusion process and not via co-precipitation. The quantity of particle loading was analyzed by 1H-NMR spectroscopy of re-dissolved nanoparticles, and it was observed that a decisive factor for high packaging efficiency is the use of a biocide with low water solubility and high hydrophobicity. SEM studies showed no influence on the particle morphology or size by both biocides 4-Hexylresorcinol and Triclosan. Finally, an aqueous nanoparticle dispersion can be coated onto model paper sheets to yield pronounced antimicrobial surface-properties. Nanoparticles loaded with the biocide Triclosan showed a high antimicrobial activity against Bacillus subtilis, a cellulase producing bacteria, if applied to model paper substrates, even at extremely low coating weights of 1-5 g/m2, respectively. Additional long-term efficacy renders these nanoparticles ideal for various applications.