RESUMEN
Supported noble metal nanocatalysts typically exhibit strong crystal plane dependent catalytic behavior, but their working mechanism is still unclear. Herein, using anatase TiO2 with well-exposed crystal facets of {101}, {100} and {001} as a prototype support, Pd- and Pt-based supported TiO2 nanocatalysts (TiO2-Pd and TiO2-Pt) were prepared by chemical reduction with NaBH4 as reducer, and they showed a distinct metal-dependent crystal facet effect in the selective hydrogenation of cinamaldehyde (CAL). For Pd-based nanocatalysts, most Pd species on the {100} plane of TiO2 are present in the oxidized form with positive charges and unexpectedly show higher reactivity than the Pd species in the zero-valence state on the {101} and {001} planes. On the contrary, Pt species on all three crystal planes of TiO2 show zero-valence state, with relatively low conversion, but much better selectivity for hydrogenation of a CîO bond than Pd-based catalysts. Well-designed experiments manipulating the stability and type of surface oxygen species confirmed that the essence of the crystal facet effect of the catalyst support actually creates a unique nanoconfined interface at the molecular level to construct a surface p-band intermediate state (PBIS), which provides a new alternative channel for surface electron transfer and consequently accelerates the reaction kinetics.
RESUMEN
Although mesoporous silica nanoparticles (MSNs) have been intensively investigated, their mesostructure and formation mechanism are still a topic of debate. Here, we show that MSNS are generated at the interface of the biphasic water-surfactant-triethanolamine-tetraalkoxysilane (TAOS) quaternary system. The spontaneous microemulsification of the hydrophobic TAOS generates microdroplets and direct micelles that both determine the particle size and the pore size. We confirmed also that the dendritic morphology with conical pores is an intermediate species, which readily transforms into regular MSNs concomitantly with the collapse of the microemulsion due to the continuous consumption of TAOS. The prominent effect of the microemulsion on the mechanism growth as a primary template is thoroughly investigated and named here tetraalkoxysilane-assisted self-emulsification templating.
RESUMEN
Mesoporous nanospheres are highly regarded for their applications in nanomedicine, optical devices, batteries, nanofiltration, and heterogeneous catalysis. In the last field, the dendritic morphology, which favors molecular diffusion, is a very important morphology known for silica, but not yet for carbon. A one-pot, easy, and scalable co-sol-gel route by using the triphasic resol-surfactant-silica system is shown to yield the topologies of dendritic and core-shell-corona mesoporous sister nanospheres by inner radial phase speciation control on a mass-transfer-limited process, depending on the relative polycondensation rates of the resol polymer and silica phases. The trick was the use of polyolamines with different catalytic activities on each hard phase polycondensation. The self-entanglement of phases is produced at the {O- , S+ , I- } organic-surfactant-inorganic interface. Mono- and biphasic mesoporous sister nanospheres of carbon and/or silica are derivatized from each mother nanospheres and called "syntaxic" because of similar sizes and mirrored morphologies. Comparing these "false twins", or yin and yang mesoporous nanospheres, functionalized by sulfonic groups provides evidence of the superiority of the dendritic topologies and the absence of a shell on the diffusion-controlled catalytic alkylation of m-cresol.
RESUMEN
The reaction between titanium alkoxides, [Ti(OR)4], and surface silanol groups is widely used to generate grafted oxo-hydroxo titanium species, whose size is difficult to control. Partial capping of the surface silanols in the presence of the masking pattern of self-repelling tetramethylammonium ions allows us to isolate surface silanol islets, on which isolated titanium ions and dimeric oxo titanium species can be generated up to 2 Ti/Si mol %. Above this loading, and up to â¼8 Ti/Si mol %, higher oligomers (trimers, hexamers, octamers, and so on) are formed, reaching the size obtained at much lower loadings (<1 Ti/Si mol %) on a nonmodified silica surface. The downsizing effect produced on our organically modified surface is monitored from the blue-shift of the charge-transfer band of the Ti(IV) ions, measured by reflectance UV-visible spectroscopy. It is also mirrored by a higher catalytic activity in cyclohexene epoxidation, revealing that it is not only the isolated Ti species that are active but also the oligomers. Regarding the latter, the smaller they are, the more active they are.
RESUMEN
Two new structural and functional models of the Mn-catalase with formula [{Mn(III)(bpy)(H2O)}(µ-2-MeOC6H4CO2)2(µ-O){Mn(III)(bpy)(X)}]X, where X = NO3 (1) and ClO4 (2) and bpy = 2,2'-bipyridine, were synthesized and characterized by X-ray diffraction. In both cases, a water molecule and an X ion occupy the monodentate positions. The magnetic properties of these compounds reveal a weak antiferromagnetic behavior (2J = -2.2 cm(-1) for 1 and -0.7 cm(-1) for 2, using the spin Hamiltonian H = -2J S1·S2) and negative zero-field splitting parameter DMn (-4.6 cm(-1) and -3.0 cm(-1) for 1 and 2, respectively). This fact, together with the nearly orthogonal orientation of the Jahn-Teller axes of the Mn(III) ions explain the unusual shape of χMT versus T plot at low temperature. Compound 1 presents a better catalase activity than 2 in CH3CN-H2O media, probably due to a beneficial interaction of the NO3(-) ion with the Mn complex in solution. These compounds were successfully inserted inside two-dimensional hexagonal mesoporous silica (MCM-41 type) leading to the same hybrid material ([Mn2O]@SiO2), without the X group. The manganese complex occupies approximately half of the available pore volume, keeping the silica's hexagonal array intact. Magnetic measurements of [Mn2O]@SiO2 suggest that most of the dinuclear unit is preserved, as a non-negligible interaction between Mn ions is still observed. The X-ray photoelectron spectroscopy analysis of the Mn 3s peak confirms that Mn remains as Mn(III) inside the silica. The catalase activity study of material [Mn2O]@SiO2 reveals that the complex is more active inside the porous silica, probably due to the surface silanolate groups of the pore wall. Moreover, the new material shows catalase activity in water media, while the coordination compounds are not active.
Asunto(s)
Antioxidantes/química , Biomimética , Catalasa/química , Manganeso/química , Dióxido de Silicio/química , Cristalografía por Rayos X , Dimerización , Espectroscopía de FotoelectronesRESUMEN
Stabilization of oil/oil Pickering emulsions using robust and recyclable catalytic amphiphilic silica nanoparticles bearing alkyl and propylsulfonic acid groups allows fast and efficient solvent-free acetalization of immiscible long-chain fatty aldehydes with ethylene glycol.
Asunto(s)
Emulsiones/química , Nanopartículas/química , Aceites/química , Dióxido de Silicio/química , Tensoactivos/química , Aldehídos/química , Alquilación , Catálisis , Glicol de Etileno/química , Ácidos Sulfónicos/químicaRESUMEN
The most important ionic precursor of gold, [AuCl4]-, is used in aqueous solution leading to chlorohydroxoaurates species, [AuCl4-x(OH)x]- (x = 1-4) due to partial hydrolysis. Their UV spectral signatures are still relatively unknown though very useful in many domains of application. Individual spectra of each of them are determined for the first time thanks to a thorough experimental investigation comprising the range 200-250 nm, surpringly ignored up to now. New isosbestic points useful for species partition analysis are evidenced. Electronic transition attribution is obtained from quantum chemical calculations based on TD-DFT. The prediction of the experimental blueshifted bands of the [AuCl4-x(OH)x]-1 anions was possible only after applying energy corrections calibrated on the full UV range two-band spectrum of the [AuCl4]- complex.
RESUMEN
Monodisperse and semi-faceted ultra-small templated mesoporous silica nanoparticles (US-MSNs) of 20-25 nm were synthesized using short-time hydrolysis of tetraethoxysilane (TEOS) at room temperature, followed by a dilution for nucleation quenching. According to dynamic light scattering (DLS), a two-step pH adjustment was necessary for growth termination and colloidal stabilization. The pore size was controlled by cetyltrimethylammonium bromide (CTAB), and a tiny amount of neutral surfactant F127 was added to minimize the coalescence between US-MSNs and to favor the transition towards internal ordering. Flocculation eventually occurred, allowing us to harvest a powder by centrifugation (~60% silica yield after one month). Scanning transmission electron microscopy (STEM) and 3D high-resolution transmission electron microscopy (3D HR-TEM) images revealed that the US-MSNs are partially ordered. The 2D FT transform images provide evidence for the coexistence of four-, five-, and sixfold patterns characterizing an "on-the-edge" crystallization step between amorphous raspberry and hexagonal pore array morphologies, typical of a protocrystalline state. Calcination preserved this state and yielded a powder characterized by packing, developing a hierarchical porosity centered at 3.9 ± 0.2 (internal pores) and 68 ± 7 nm (packing voids) of high potential for support for separation and catalysis.
RESUMEN
Mesoporous silica nanoparticles (MSNs) are experiencing rapid development in the biomedical field for imaging and for use in heterogeneous catalysis. Although the synthesis of MSNs with various morphologies and particle sizes has been reported, synthesis of a pore network with monodispersion control below 200 nm is still challenging. We achieved this goal using mild conditions. The reaction occurred at atmospheric pressure with a templating sol-gel technique using cetyltrimethylammonium (CTA(+)) as the templating surfactant and small organic amines (SOAs) as the mineralizing agent. Production of small pore sizes was performed for the first time, using pure and redispersible monodispersed porous nanophases with either stellate (ST) or raspberry-like (RB) channel morphologies. Tosylate (Tos(-)) counterions favored ST and bromide (Br(-)) RB morphologies at ultralow SOA concentrations. Both anions yielded a worm-like (WO) morphology at high SOA concentrations. A three-step formation mechanism based on self-assembly and ion competition at the electrical palisade of micelles is proposed. Facile recovery and redispersion using specific SOAs allowed a high yield production at the kilogram scale. This novel technique has practical applications in industry.
RESUMEN
New, ultrasmall nanoparticles with sizes below 5â nm have been obtained. These small rigid platforms (SRP) are composed of a polysiloxane matrix with DOTAGA (1,4,7,10-tetraazacyclododecane-1-glutaric anhydride-4,7,10-triacetic acid)-Gd(3+) chelates on their surface. They have been synthesised by an original top-down process: 1)â formation of a gadolinium oxide Gd2O3 core, 2)â encapsulation in a polysiloxane shell grafted with DOTAGA ligands, 3)â dissolution of the gadolinium oxide core due to chelation of Gd(3+) by DOTAGA ligands and 4)â polysiloxane fragmentation. These nanoparticles have been fully characterised using photon correlation spectroscopy (PCS), transmission electron microscopy (TEM), a superconducting quantum interference device (SQUID) and electron paramagnetic resonance (EPR) to demonstrate the dissolution of the oxide core and by inductively coupled plasma mass spectrometry (ICP-MS), mass spectrometry, fluorescence spectroscopy, (29)Si solid-state NMR, (1)Hâ NMR and diffusion ordered spectroscopy (DOSY) to determine the nanoparticle composition. Relaxivity measurements gave a longitudinal relaxivity r1 of 11.9â s(-1) mM(-1) per Gd at 60â MHz. Finally, potentiometric titrations showed that Gd(3+) is strongly chelated to DOTAGA (complexation constant logß110 =24.78) and cellular tests confirmed the that nanoconstructs had a very low toxicity. Moreover, SRPs are excreted from the body by renal clearance. Their efficiency as contrast agents for MRI has been proved and they are promising candidates as sensitising agents for image-guided radiotherapy.
Asunto(s)
Gadolinio/química , Compuestos Heterocíclicos con 1 Anillo/química , Dióxido de Silicio/química , Siloxanos/química , Sustancia P/análogos & derivados , Medios de Contraste/química , Imagen por Resonancia Magnética/métodos , Espectroscopía de Resonancia Magnética , Microscopía Electrónica de Transmisión , Nanopartículas/química , Radioterapia Guiada por Imagen , Espectrometría de Fluorescencia , Sustancia P/químicaRESUMEN
Despite the great effort made in recent years on lanthanide-based ratiometric luminescent nanothermometers able to provide temperature measurements in water, their design remains challenging. We report on the synthesis and properties of efficient ratiometric nanothermometers that are based on mesoporous stellate nanoparticles (MSN) of ca. 90 nm functionalized with an acetylacetonate (acac) derivative inside the pores and loaded with ß-diketonate-Tb3+/Eu3+ complexes able to work in water, in PBS or in cells. Encapsulating a [(Tb/Eu)9(acac)16(µ3-OH)8(µ4-O)(µ4-OH)] complex (Tb/Eu ratio = 19/1 and 9/1) led to hybrid multifunctionalized nanoparticles exhibiting a Tb3+ and Eu3+ characteristic temperature-dependent luminescence with a high rate Tb3+-to-Eu3+ energy transfer. According to theoretical calculations, the modifications of photoluminescence properties and the increase in the pairwise Tb3+-to-Eu3+ energy transfer rate by about 10 times can be rationalized as a change of the coordination number of the Ln3+ sites of the complex from 7 to 8 accompanied by a symmetry evolution from Cs to C4v and a slight shortening of intramolecular Ln3+-Ln3+ distances upon the effect of encapsulation. These nanothermometers operate in the 20-70 °C range with excellent photothermal stability, cyclability and repeatability (>95%), displaying a maximum relative thermal sensitivity of 1.4% °C-1 (at 42.7 °C) in water. Furthermore, they can operate in cells with a thermal sensitivity of 8.6% °C-1 (at 40 °C), keeping in mind that adjusting the calibration for each system is necessary to ensure accurate measurements.
RESUMEN
We report the synthesis of a hybrid nanocatalyst obtained through the immobilization of bio-inspired [{Mn(bpy)(H2O)}(µ-2-MeC6H4COO)2(µ-O){Mn(bpy)(NO3)}]NO3 compound into functionalized, monodispersed, mesoporous silica nanoparticles. The in situ dual functionalization sol-gel strategy adopted here leads to the synthesis of raspberry-shaped silica nanoparticles of ca. 72 nm with a large open porosity with preferential localization of 1,4-pyridine within the pores and sulfobetaine zwitterion on the nanoparticles' periphery. These nano-objects exhibit improved catalase-mimicking activity in water thanks to the encapsulation/immobilization of the catalytic active complex and high colloidal stability in water, as demonstrated through the dismutation reaction of hydrogen peroxide.
RESUMEN
Ru(II) complexes with polypyridyl ligands play a central role in the development of photocatalytic organic reactions. This work is aimed at the structural modification of such complexes to increase their photocatalytic efficiency and adapt them for the preparation of reusable photocatalytic systems. Nine [Ru(phen)(bpy)2]2+-type complexes (bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline) (Ru-Pcat) bearing the P(O)(OEt)2 substituent attached to the phen core directly or through a 1,4-phenylene linker were synthesized and characterized by spectroscopic and electrochemical techniques. The coordination mode of phen ligands was confirmed by single crystal X-ray analysis. The (spectro)electrochemical data show that the first electron transfer in Ru-Pcat takes place on the phen ligand. The emission maxima and quantum yields are strongly affected by the substitution pattern, reaching the far-red region (697 nm) for Ru-3,8P2. The singlet oxygen quantum yields of Ru-Pcat were evaluated using the chemical trapping method. Finally, the photocatalytic performance of Ru-Pcat in the oxidation of sulfides with molecular oxygen was investigated. Both dialkyl and alkyl aryl sulfides were quantitatively transformed into sulfoxides under irradiation with a blue LED in the acetonitrile-water mixture (10 : 1) using a low loading of 0.005-0.05 mol% Ru(II) photocatalysts. To rationalize the effect of phosphonate substituents on the photocatalytic efficiency, comparative kinetic studies of (1) 4-nitrothioanisole oxidation proceeding predominantly via the electron transfer pathway and (2) oxidation of dibutyl sulfide wherein singlet oxygen serves as an oxidant have been performed. It was demonstrated that complexes with the P(O)(OEt)2 substituent at positions 4 and 7 outperform the benchmark photocatalyst Ru-(bpy)3 and the parent complex Ru-phen in the reactions proceeding through electron transfer (reductive quenching photocatalytic cycle). The TON in the oxidation of 4-methoxythioanisole was found to be as high as 1 000 000 that is, to our knowledge, the highest among previously reported photocatalysts. In contrast, upon separating the P(O)(OEt)2 group and the phen core with the 1,4-phenylene linker, singlet oxygen quantum yields significantly increase that favors reactions proceeding through energy transfer (the oxidation of dibutyl sulfide in our case). Thus, both series of Ru(II) complexes prepared in this work are promising for the improvement of known photocatalytic reactions and the development of new transformations.
RESUMEN
Following the structural concept of copper-containing proteins in which dinuclear copper centers are connected by hydroxide bridging ligands, a bidentate copper(II) complex has been incorporated into nano-confined MCM-41 silica by a multistep sequential grafting technique. Characterization by a combination of EPR spectroscopy, X-ray photoelectron spectroscopy (XPS), UV/Vis spectroscopy, IR spectroscopy , and solid-state (13)C and (29)Si cross-polarization magic-angle spinning (CP-MAS) NMR suggests that dinuclear Cu complexes are bridged by hydroxide and other counterions (chloride or perchlorate ions), similar to the situation for EPR-undetectable [Cu(II)···Cu(II)] dimer analogues in biological systems. More importantly, a dynamic mononuclear-dinuclear equilibrium between different coordination modes of copper is observed, which strongly depends on the nature of the counterions (Cl(-) or ClO(4)(-)) in the copper precursor and the pore size of the silica matrix (the so-called confinement effect). A proton-transfer mechanism within the hydrogen-bonding network is suggested to explain the dynamic nature of the dinuclear copper complex supported on the MCM-41 silica.
Asunto(s)
Cobre/química , Compuestos Organometálicos/química , Dióxido de Silicio/química , Catálisis , Cristalografía por Rayos X , Enlace de Hidrógeno , Espectroscopía de Resonancia Magnética , Conformación Molecular , Espectroscopía de Fotoelectrones , Protones , Espectrofotometría UltravioletaRESUMEN
The incorporation of a luminescent probe into a nano-vector is one of the approaches used to design chemosensors and nanocargos for drug delivery and theranostics. The location of the nano-vector can be followed using fluorescence spectroscopy together with the change of environment that affects the fluorescence properties. The ligand 9-anthracene carboxylate is proposed in this study as a luminescent probe to locate two types of manganese complexes inside three series of porous nanoparticles of different composition: resol-silica, carbon-silica and pure silica. The manganese complexes are a tetranuclear MnIII cluster [MnIII4(µ-O)2(µ-AntCO2)6(bpy)2(ClO4)2] with a butterfly core, and a MnII dinuclear complex [{MnII(bpy)(AntCO2)}2(µ-AntCO2)2(µ-OH2)]. The magnetic measurements indicate that both complexes are present as dinuclear entities when incorporated inside the particles. Both the Mn complexes and the nanoparticles are luminescent. However, when the metal complexes are introduced into the nanoparticles, the luminescent properties of both are altered. The study of the fluorescence of the nanoparticles' suspensions and of the supernatants shows that MnII compounds seem to be more retained inside the particles than MnIII compounds. The resol-silica nanoparticles with MnII complexes inside is the material that presents the lowest complex leaching in ethanol.
RESUMEN
The accessibility of metal(II) complexes in 2D hexagonal mesostructured porous silicas obtained by direct synthesis is controlled using an appropriate organosilane ligand. This is exemplified here using copper(II) as a transition metal probe and a neutral or negatively charged ligand: N-(2-aminoethyl)-3-aminopropyltrimethoxysilane, L(A), and, N-salicylaldimine-propylamine-trimethoxysilane, L(B)(-), respectively. L(A) leads to inaccessible complexes located into the pore wall and called "embedded" sites here where silanolate groups from the siliceous network block the access to Cu(II) ions. By contrast, L(B)(-) generates accessible complexes, named "showing-on" sites here. The copper-containing silicas were synthesized with various metal molar ratios (M/SiO(2) = 0.5-3%) in basic media, with cetyltrimethylammonium p-toluenesulfonate (CTATos) as template and with sodium silicate solution as silicon source. A soft template extraction procedure has been developed to preserve the complex integrity of the showing-on copper sites during the treatment. The embedded copper(II) and nickel(II) sites were compared. Materials containing embedded, showing-on, and grafted sites were also compared with regard to pore size, surface polarity, and metal leaching. The material containing showing-on sites was found to be catalytically active for the hydroxylation of phenol into catechol and hydroquinone. Both textural and structural properties of the material and the copper sites were investigated using XRD, TEM, N(2) sorption isotherms, TGA, FT-IR, UV-visible, and EPR spectroscopies.
RESUMEN
Clickable ligands like N,N'-bis((pyridin-2-yl)methyl)prop-2-yn-1-amine (L(1)) and N-((1-methyl-1H-imidazol-2-yl)methyl)-N-(pyridin-2-ylmethyl)prop-2-yn-1-amine (L(2)) have been used to synthesise a series of manganese(ii) complexes for grafting onto appropriate solid supports. These ligands mimic the 2-His-1-carboxylate facial chelation present in the active site of the manganese-dependent dioxygenase (MndD), while the alkyne side function allows grafting of the ligand onto an azido-functionalised support using "click chemistry" methodologies. Such synthetic analogues of the MndD crystallise in the solid state as double halide or pseudohalide-bridged dinuclear manganese(ii) complexes of the general formula [Mn2(µ-X)2X2L2] [L = L(1) with X = Cl (), Br (), and N3 (); L = L(2) with X = N3 ()]. Complexes are characterised by a weak magnetic exchange interaction between the two high-spin Mn(II) ions through the two X(-) bridges (J in the range of -0.059 to +5.30 cm(-1), H = -J·SMn1·SMn2 with SMn1 = SMn2 = 5/2). A new magneto-structural correlation of superexchange bis(µ1,1-azido)dimanganese(ii) complexes has been proposed using both structural parameters, the Mn-N-Mn bridging angle and the Mn-Nazido distance. In MeOH-EtOH solution the dimeric species are present together with few percents of mononuclear manganese(ii) complexes as evidenced by electron paramagnetic resonance (EPR) spectroscopy. Grafting the complexes onto mesoporous silica of MCM-41 type stabilises both dimers and monomers in the nanopores of the solid.
Asunto(s)
Química Clic , Complejos de Coordinación/química , Dioxigenasas/química , Manganeso/química , Dióxido de Silicio/química , Dominio Catalítico , Cristalografía por Rayos X , Espectroscopía de Resonancia por Spin del Electrón , Ligandos , Modelos Moleculares , Conformación Molecular , Técnicas de Síntesis en Fase SólidaRESUMEN
A key challenge in biomass conversion is how to achieve valuable molecules with optimal reactivity in the presence of immiscible reactants. This issue is usually tackled using either organic solvents or surfactants to promote emulsification, making industrial processes expensive and not environmentally friendly. As an alternative, Pickering emulsions using solid particles with tailored designed surface properties can promote phase contact within intrinsically biphasic systems. Here we show that amphiphilic silica nanoparticles bearing a proper combination of alkyl and strong acidic surface groups can generate stable Pickering emulsions of the glycerol/dodecanol system in the temperature range of 35-130°C. We also show that such particles can perform as Pickering Interfacial Catalysts for the acid-catalyzed etherification of glycerol with dodecanol at 150°C. Our findings shed light on some key parameters governing emulsion stability and catalytic activity of Pickering interfacial catalytic systems. This understanding is critical to pave the way toward technological solutions for biomass upgrading able to promote eco-efficient reactions between immiscible organic reagents with neither use of solvents nor surfactants.
Asunto(s)
Dodecanol/química , Emulsiones/química , Glicerol/química , Nanopartículas/química , Dióxido de Silicio/química , Tensoactivos/química , Biomasa , Catálisis , Calor , Nanopartículas/ultraestructuraRESUMEN
Three copper(II)@hemicryptophane complexes with various cavity sizes and shapes, Cu(II)@1, Cu(II)@2 and Cu(II)@3, were synthesized and characterized by near-IR/vis and EPR spectroscopies. The spectroscopic data are consistent with the presence of a trigonal-bipyramidal geometry of the N(4)Cu·H(2)O core, in accord with the energy-minimized structures obtained from DFT calculations. Cyclic voltammetry studies in CH(2)Cl(2) showed irreversible redox processes, whereas electrolysis coulometry indicated that Cu(II)/Cu(I) complexes could be interconverted. Electrochemistry data of the complexes stress the crucial role of the cage structure of the hemicryptophane in the thermodynamics of the electron transfer.
Asunto(s)
Complejos de Coordinación/química , Compuestos Policíclicos/síntesis química , Complejos de Coordinación/síntesis química , Cobre/química , Técnicas Electroquímicas , Espectroscopía de Resonancia por Spin del Electrón , Transporte de Electrón , Electrones , Modelos Moleculares , Oxidación-Reducción , Compuestos Policíclicos/química , TermodinámicaRESUMEN
A mixed amine pyridine polydentate Fe(II) complex was covalently tethered in hexagonal mesoporous silica of the MCM-41 type. Metal site isolation was generated using adsorbed tetramethylammonium cations acting as a patterned silanol protecting mask and trimethylsilylazane as a capping agent. Then, the amine/pyridine ligand bearing a tethering triethoxysilane group was either grafted to such a pretreated silica surface prior to or after complexation to Fe(II). These two synthetic routes, denoted as two-step and one-step, respectively, were also applied to fumed silica for comparison, except that the silanol groups were capped after tethering the metal unit. The coordination of the targeted complex was monitored using UV-visible spectrophotometry and, according to XPS, the best control was achieved inside the channels of the mesoporous silica for the two-step route. For the solid prepared according to the one-step route, tethering of the complex occurred mainly at the entrance of the channel.