Effects of Low-Level Laser Therapy and Purified Natural Latex (Hevea brasiliensis) Protein on Injured Sciatic Nerve in Rodents: Morpho-Functional Analysis.

The present study analyzed the effects of low-level laser therapy (LLLT) and the purified natural latex protein (Hevea brasiliensis, F1 protein) on the morpho-function of sciatic nerve crush injuries in rats. One-hundred and eight male Wistar rats were randomly allocated to six groups (n = 18): 1. Control; 2. Exposed (nerve exposed); 3. Injury (injured nerve without treatment); 4. LLLT (injured nerve irradiated with LLLT (15 J/cm2, 780 nm)); 5. F1 (injured nerve treated with F1 protein (0.1%)); and 6. LLLT + F1 (injured nerve treated with LLLT and F1). On the 1st, 7th, 14th, and 56th days after injury, a functional sensory analysis of mechanical allodynia and mechanical hyperalgesia and a motor analysis of grip strength and gait were performed. After 3, 15, and 57 days, the animals were euthanized for morphometric/ultrastructural analyses. The treatments applied revealed improvements in morphometric/ultrastructural parameters compared to the injured group. Sensory analyses suggested that the improvements observed were associated with time progression and not influenced by the treatments. Motor analyses revealed significant improvements in grip strength from the 7th day in the LLLT group and in gait from the 56th day in all treated groups. We concluded that even though the morphological analyses showed improvements with the treatments, they did not influence sensory recovery, and LLLT improved motor recovery.

Simultaneous Implant Placement and Sinus Lift Using Leukocyte-Platelet Rich Fibrin: A Retrospective 40-Month Study.

ABSTRACT: The aim of this study was to report the 40-month clinical radiographical outcomes of maxillary sinus floor augmentation using leukocyte-platelet rich fibrin (L-PRF) as a single graft in combination with immediately placed implants. Twenty partially edentulous individuals with missing teeth in the region associated to maxillary sinus were included in this retrospective study. A lateral sinus floor elevation was performed considering a complete wear of the bone wall of the maxillary sinus and immediately placing the implant and filled the maxillary sinus with L-PRF clots as a single graft. After 5 months, all the implants received single screwed implant-supported prostheses. Subsequent evaluation was every 4 months assessing the success rate and biological complications. Two maxillary sinus membrane were perforated and covered with L-PRF clots. The mean bone height gain was 62.6%, observing a 100% of success and that in all the cases achieved at least the implant height. In conclusion, the use of platelet-rich fibrin clot as a single graft biomaterial during the maxillary sinus lift procedure combined with immediate implant placement may be a reliable clinical alternative, even to repair the sinus membrane.

Clinical evaluation of single 4-mm implants in the posterior mandible: A 3-year follow-up pilot study.

STATEMENT OF PROBLEM: Extra-short implants in the posterior mandible can increase the functional surface area and reduce the risk of implant overload. However, reports of treatment using single extra-short implants in the posterior mandible with a midterm follow-up are lacking. PURPOSE: The purpose of this prospective pilot study was to evaluate the clinical behavior of single extra-short 4-mm implants placed in the posterior mandible during a follow-up of 3 years from implant restoration. MATERIAL AND METHODS: A total of 18 participants with a single extra-short 4-mm-long implant placed in the area of the mandibular first molars participated in this pilot study. The survival and success rates of implants, as well as biologic and prosthetic variables, were evaluated during a follow-up of 3 years from implant restoration. RESULTS: The survival rate of the implants was 100%, with no implant or biologic complications recorded. One prosthetic complication (loosening of 1 screw) was observed. CONCLUSIONS: Single extra-short (4 mm) implants in the posterior mandible showed favorable clinical behavior during the first 3-years of follow-up.

Autologous Fibrin Glue With Collagen Carrier During Maxillary Sinus Lift Procedure.

This study aimed to describe the use of autologous fibrin glue (AFG) with a collagen carrier during maxillary sinus lift procedures with immediate implants during 3 years of follow-up. Twelve patients who had lost their teeth in the region associated to maxillary sinus, with a bone remnant 3 to 5 mm in height, were selected to perform a maxillary sinus augmentation with AFG and collagen membrane, placing the implant immediately. After 5 months, the implants were connected and rehabilitated. The patients were followed-up for a 3-year period, being evaluated every 6 months. At the end of the 3-year follow-up period, 100% implant success was observed, with a mean of bone augmentation of 7.75 mm. Three maxillary sinus membranes were perforated and healed by using AFG and collagen membrane without identify any complication during the follow-up period. Finally, the use of collagen carrier combined with AFG as a filling material during the maxillary sinus lift procedure may be a low-cost and reliable alternative that allows bone formation.

Analysis of the variation in low-level laser energy density on the crushed sciatic nerves of rats: a morphological, quantitative, and morphometric study.

The objective of this study was to evaluate three energy densities of low-level laser therapy (LLLT, GaAlAs, 780 nm, 40 mW, 0.04 cm2) for the treatment of lesions to peripheral nerves using the sciatic nerve of rats injured via crushing model (15 kgf, 5.2 MPa). Thirty Wistar rats (♂, 200-250 g) were divided into five groups (n = 6): C-control, not injured, and irradiated; L0-injured nerve without irradiation; L4-injured nerve irradiated with LLLT 4 J/cm2 (0.16 J); L10-injured nerve irradiated with LLLT 10 J/cm2 (0.4 J); and L50-injured nerve irradiated with LLLT 50 J/cm2 (2 J). The animals were sacrificed 2 weeks after the injury via perfusion with glutaraldehyde (2.5%, 0.1 M sodium cacodylate buffer). The nerve tissue was embedded in historesin, cut (3 µm), mounted on slides, and stained (Sudan black and neutral red). The morphological and quantitative analysis (myelin and blood capillary densities) and morphometric parameters (maximum and minimum diameters of nerve fibers, axon diameter, G-ratio, myelin sheath thickness) were assessed using the ImageJ software. ANOVA (parametric) or Kruskal-Wallis (nonparametric) tests were used for the statistical analysis. Groups L0, L4, L10, and L50 exhibited diminished values of all the quantitative and morphometric parameters in comparison to the control group. The morphological, quantitative, and morphometric data revealed improvement after injury in groups L4, L10, and L50 (irradiated groups) compared to the injured-only group (L0); the best results, in general, were observed for the L10 group after 15 days of nerve injury.

Bone grafts utilized in dentistry: an analysis of patients' preferences.

BACKGROUND: Many procedures currently require the use of bone grafts to replace or recover bone volume that has been resorbed. However, the patient's opinion and preferences must be taken into account before implementing any treatment. Researchers have focused primarily on assessing the effectiveness of bone grafts rather than on patients' perceptions. Thus, the aim of this study was to explore patients' opinions regarding the different types of bone grafts used in dental treatments. METHODS: One hundred patients were randomly chosen participated in the study. A standardized survey of 10 questions was used to investigate their opinions regarding the different types of bone grafts used in dental treatments. Descriptive statistics were calculated for the different variables, and absolute frequencies and percentages were used as summary measures. A value of p <0.05 was selected as the threshold for statistical significance. RESULTS: The highest rate of refusal was observed for allografts and xenografts. The grafts with the lowest rates of refusal were autologous grafts (3 %) and alloplastics (2 %). No significant differences were found between the various types of bone grafts in the sociodemographic variables or the refusal/acceptance variable. Similarly, no significant relations were observed between a specific religious affiliation and the acceptance/refusal rates of the various types of graft. CONCLUSIONS: Allografts and xenografts elicited the highest refusal rates among the surveyed patients, and autologous bone and alloplastics were the most accepted bone grafts. Moreover, no differences were found in the sociodemographic variables or religious affiliations in terms of the acceptance/refusal rates of the different bone grafts.

The influence of the connection, length and diameter of an implant on bone biomechanics.

BACKGROUND: Regardless of the multiple options of connections, diameters and heights for dental implants, the clinician should know the biomechanical behavior of the bone to plan the treatment according to the biological and anatomical conditions of each patient, without risk to the long-term treatment success. REVIEW: The following review attempts to summarize the relevant literature to establish guidelines for clinicians based on the scientific evidence regarding the influence by the implant's connection, diameter and length on the bone biomechanics. CONCLUSIONS: The length, diameter and connection of each implant have a degree of influence in bone biomechanics. Despite the influence of different implant connections, diameters and lengths on peri-implant bone stress and strain, these characteristics should remain within the physiological limits to avoid a pathological overload, bone resorption and consequent risk to the long-term success of implant-prosthetic treatment.

Using an Attachment System with PEEK Matrices for Single-Implant Overdentures: In Vitro Retention Force.

Single-implant overdentures (SIOs) represent a major biomechanical challenge in terms of prosthetic retention. The Novaloc attachment system has the potential to overcome those challenges when used for SIOs, due to the use of PEEK matrices. This study compared the retentive force of the Novaloc attachment to the traditional Locator system, before and after cyclic insertion-removal cycles. Three Novaloc matrices (white, yellow, and green, corresponding to low, medium, and high retention, respectively) and Locator (medium retention) were tested, totalling four groups. Retentive force was measured using an Imada force gauge before and after 1095 insertion-removal cycles, corresponding to a year of SIO wearing. Retention was tested with the implants angulated at 0, 10, and 20°. Data for the different groups, angles, and cycling periods were tested via linear regression analysis and two-way ANOVA (α = 0.05). Although the Locator system yielded higher retention forces in general, it lost a much higher percentage of retention with cycling. This trend was similar with the three angles, with forces being inversely proportional to the implant angulation. The authors conclude that Novaloc may provide more reliable retention for SIOs due to their higher resistance to insertion-removal cycling.

Palatal brushing for the treatment of denture stomatitis: A multicentre randomized controlled trial.

PURPOSE: To determine the effectiveness of palatal brushing in the treatment of denture-related erythematous stomatitis (DES) in complete denture wearers. METHODS: This two-parallel-arm RCT was conducted in three university clinics in Brazil, Canada, and Chile. Participants (n=77) were randomly allocated to receive (i) instructions for palatal brushing and standard oral/denture hygiene ("intervention"); or (ii) standard oral/denture hygiene instructions only ("control"). Data collection was carried out at the baseline and at 3 and 6 months after intervention. Outcomes included the magnitude of oral Candida carriage and the degree of inflammation of denture-bearing tissues. Groups were compared using generalized estimating equations and chi-square test (α=0.05). RESULTS: Palatal inflammation levels were reduced significantly in the "intervention" compared to "control" group at 6 months (intervention: 70%, control: 40%; chi-square, p=0.04). There was no between-group significant difference in the Candida count from denture and palatal biofilms; however, a subgroup analysis restricted to baseline Candida carriers showed further reduction with the intervention at 6 months. No adversity was observed by trialist or reported by participants. CONCLUSIONS: Including palatal brushing in oral instructions for denture wearers has positive impact on DES-related mucosal inflammation. Thus, our findings endorse the inclusion of palatal brushing in standard oral hygiene instructions to treat DES.

Biomechanical Behavior of Narrow Dental Implants Made with Aluminum- and Vanadium-Free Alloys: A Finite Element Analysis.

Titanium (Ti) alloys used for narrow dental implants usually contain aluminum (Al) and vanadium (V) for improved resistance. However, those elements are linked to possible cytotoxic effects. Thus, this study evaluated the biomechanical behavior of narrow dental implants made with Al- and V-free Ti alloys by the finite element method. A virtual model of a partially edentulous maxilla received single implants (diameter: 2.7 and 2.9 mm; length: 10 mm) at the upper lateral incisor area, with respective abutments and porcelain-fused-to-metal crowns. Simulations were performed for each implant diameter and the following eight alloys (and elastic moduli): (1) Ti-6Al-4V (control; 110 GPa), (2) Ti-35Nb-5Sn-6Mo-3Zr (85 GPa), (3) Ti-13Nb-13Zr (77 GPa), (4) Ti-15Zr (113 GPa), (5) Ti-8Fe-5Ta (120 GPa), (6) Ti-26.88Fe-4Ta (175 GPa), (7) TNTZ-2Fe-0.4O (107 GPa), and (8) TNTZ-2Fe-0.7O (109 GPa). The implants received a labially directed total static load of 100 N at a 45° angle relative to their long axis. Parameters for analysis included the maximum and minimum principal stresses for bone, and von Mises equivalent stress for implants and abutments. Ti-26.88Fe-4Ta reaches the lowest maximum (57 MPa) and minimum (125 MPa) principal stress values, whereas Ti-35Nb-5Sn-6Mo-3Zr (183 MPa) and Ti-13Nb-13Zr (191 MPa) models result in the highest principal stresses (the 2.7 mm model surpasses the threshold for bone overload). Implant diameters affect von Mises stresses more than the constituent alloys. It can be concluded that the narrow implants made of the Ti-26.88Fe-4Ta alloy have the most favorable biomechanical behavior, mostly by mitigating stress on peri-implant bone.

A new insight of Platelet-Rich Fibrin clots morphology and their elemental composition.

This study analyzed the architecture of Platelet-Rich Fibrin (PRF) clots and assessed their elemental composition in order to provide new insight into this biomaterial. Five surplus PRF clots (2,700 RPM, 12 min.) donated by patients (63.6 ±â€¯12.3 years old) were prepared for use in dental clinical procedures. The internal three-dimensional morphology of the red zones and the thirds of the yellow zones of the clots were analyzed by Variable Pressure Scanning Electron Microscope (VPSEM) after sample preparation by two methods: 1. Fixation (2.5% gluataraldehyde); and 2. Fixation with subsequent partial removal of extracellular elements (8 N, HCl). Semi-quantitative elemental analysis was performed by energy-dispersive X-ray spectrometry (EDX). VPSEM analysis showed erythrocytes in both the red zone and the yellow zone, which consisted mainly of fibrin. Removal of extracellular elements enriched the morphology of both zones; the organization of the fibrin was observed to differ in the thirds of the yellow zone, with increasing density and organization to distal. The elements that compose organic substances (C-Carbon, N-Nitrogen, O-Oxygen, Na-Sodium and P-Phosphorus) and halogens (Cl-Chloride and S-Sulfur) were detected; the highest concentrations were of C, followed by O (p < 0.05), in the proximal region of the fibrin. The results of the present study suggest organization of fibrin in the PRF clot, and also reveal the distribution of the elements present in the different regions of the clot. Improved understanding of these characteristics may favor the use of this biomaterial by increasing its efficiency and functionality.

Platelet-rich fibrin and collagen membrane in the preservation of the alveolar bone: Feasibility of the elemental inorganic composition and scanning electron microscopy analysis.

The success of dental implants is related to the amount, quality, and composition of the alveolar bone. The placement of platelet-rich fibrin (PRF) clot associated with a resorbable collagen membrane (RCM) in a postextraction alveolus is a technique used for ridge preservation. This case report study analyzed the ultrastructural characteristics of cross-sectioned alveolar bone that received PRF and RCM using scanning electron microscopy and the inorganic composition using "energy dispersive X-ray spectrometry," in order to explore the feasibility of this method to clinical studies. Three alveolar bone samples from two male patients (37 and 58 years old), obtained in the procedure of placing the dental implant, were analyzed. Two bone samples previously received PRF and RCM (M37 and M58), the third sample represented a physiological bone formation without treatment (M37-control). The bone sample M37 showed irregularly shaped islets of calcified material intermingled with connective tissue. The other samples, from the 58-year-old patient with PRF and RCM (M58); and the other untreated bone sample from the same 37-year-old patient (M37-control) showed similar ultrastructural morphology with trabecular conformation without islets agglomerations. The inorganic composition analysis showed higher concentrations of calcium and phosphorus in both samples treated with PRF and RCM in comparison to the untreated bone sample. The Ca/P ratio was higher in the M37 sample compared to the others samples. The results showed morphology and inorganic composition differences among the treatments used, suggesting that this method is feasible to analyze parameters of the alveolar bone tissue.

Effect of Different Framework Materials in Implant-Supported Fixed Mandibular Prostheses: A Finite Element Analysis.

PURPOSE: To evaluate the biomechanical behaviors of different framework materials in implant-supported fixed mandibular prostheses using three-dimensional (3D) finite element analysis. MATERIALS AND METHODS: A model of a severely resorbed edentulous mandible was obtained from a tomography database. Morse taper-connection implants and multi-unit abutments were cut with an electro-erosion machine and scanned using a 3D scanner. The implants were positioned on the model at the bone level and distributed equally to support a fixed complete prosthesis. The simulations were divided into six groups according to the framework material: titanium (Ti); cobalt-chromium (Co-Cr); zirconia (ZrO2); polyether ether ketone (PEEK); carbon fiber-reinforced polyether ether ketone (CFR-PEEK); and polymethyl methacrylate (PMMA). The resultant load applied was obtained from the masseter, temporal, lateral, and medial pterygoid muscles. The principal stresses and von Mises equivalent stresses were analyzed and compared among the framework materials, and the results were described both quantitatively and qualitatively. RESULTS: PEEK and PMMA frameworks showed the highest total deformation values, showing decreases of von Mises stresses in the frameworks, implants, and abutments, but with a high tensile stress in the trabecular bone that achieved critical values. CFR-PEEK frameworks achieved their failure limit, whereas the ZrO2, Co-Cr, and Ti frameworks exhibited principal stresses in the bone region within physiologic limits. CONCLUSION: From a biomechanical point of view, the Ti, Co-Cr, and ZrO2 frameworks demonstrated the most favorable outcomes.

Oral Applications of Cyanoacrylate Adhesives: A Literature Review.

Cyanoacrylate adhesives have been used in medicine and dentistry with some controversial opinions. The aim of this review was to summarize the relevant literature regarding the use of cyanoacrylate adhesives for oral wounds during dental and surgical procedures, with focus on the applications, indications, advantages, and disadvantages. In conclusion, in vivo and clinical studies have demonstrated in the last few years convincing results regarding the safety, efficacy, ease of application, and feasibility of all types of cyanoacrylate adhesives used in intra- and extraoral procedures.

Sinus Floor Augmentation by Intraoral Endoscopic Approach for Biomaterial Study in a Rabbit Model.

AIM: To develop a new surgical model for sinus floor augmentation (SFA) in rabbit for experimental purposes. MATERIALS AND METHODS: Eight adult rabbits were used, two for a surgical design using the anatomical dissection study, and the other six for an endoscopically assisted intraoral approach of SFA unilaterally, creating a subantral space where an allograft biomaterial was deposited. SFA was verified through cone-beam computerized tomography. Healing, weight, food, feces, and behavior were evaluated for 4 weeks post-operatively. RESULTS: All animals survived. There was no bleeding or infection; inflammation was mild. No changes were observed in terms of feeding, weight, feces, or behavior. Tissue healing was normal. CONCLUSION: This model is a refinement of the experimental technique and is a real option for SFA, without compromising animal morbidity because of its conservative design. The minimally invasive approach with endoscopic assistance reduces bias and improves surgical predictability.

Growth factors expression and ultrastructural morphology after application of low-level laser and natural latex protein on a sciatic nerve crush-type injury.

The effects of low-level laser therapy (LLLT) and natural latex protein (F1, Hevea brasiliensis) were evaluated on crush-type injuries (15kg) to the sciatic nerve in the expressions of nerve growth factor (NGF) and vascular endothelium growth factor (VEGF) and ultrastructural morphology to associate with previous morphometric data using the same protocol of injury and treatment. Thirty-six male rats were allocated into six experimental groups (n = 6): 1-Control; 2-Exposed nerve; 3-Injured nerve; 4-LLLT (15J/cm2, 780nm, 30mW, Continuous Wave) treated injured nerve; 5-F1 (0,1mg) treated injured nerve; and 6-LLLT&F1 treated injured nerve. Four or eight weeks after, sciatic nerve samples were processed for analysis. NGF expression were higher (p<0.05) four weeks after in all injured groups in comparison to Control (Med:0.8; Q1:0; Q3:55.5%area). Among them, the Injured (Med:70.7; Q1:64.4; Q3:77.5%area) showed the highest expression, and F1 (Med:17.3; Q1:14.1; Q3:21.7%area) had the lowest. At week 8, NGF expressions decreased in the injured groups. VEGF was expressed in all groups; its higher expression was observed in the injured groups 4 weeks after (Injured. Med:29.5; F1. Med:17.7 and LLLT&F1. Med:19.4%area). At week 8, a general reduction of VEGF expression was noted, remaining higher in F1 (Med:35.1; Q1.30.6; Q3.39.6%area) and LLLT&F1 (Med:18.5; Q1:16; Q3:25%area). Ultrastructural morphology revealed improvements in the treated groups; 4 weeks after, the F1 group presented greater quantity and diameter of the nerve fibers uniformly distributed. Eight weeks after, the F1 and LLLT&F1 showed similar characteristics to the non-injured groups. In summary, these results and our previous studies indicated that F1 and LLLT may favorably influence the healing of nerve crush injury. Four weeks after nerve injury F1 group showed the best results suggesting recovery acceleration; at 8th week F1 and LLLT&F1 groups presented better features and higher vascularization that could be associated with VEGF maintenance.

Influence of transmucosal height in abutments of single and multiple implant-supported prostheses: a non-linear three-dimensional finite element analysis.

The aim of this study was to analyze the influence of three different transmucosal heights of the abutments in single and multiple implant-supported prostheses through the finite element method. External hexagon implants, MicroUnit, and EsthetiCone abutments were scanned and placed in an edentulous maxillary model obtained from a tomography database. The simulations were divided into two groups: (1) one implant with 3.75 × 10 mm placed in the upper central incisor, simulating a single implant-supported fixed prosthesis with an EsthetiCone abutment; and (2) two implants with 3.75 × 10 mm placed in the upper lateral incisors with MicroUnit abutments, simulating a multiple implant-supported prosthesis. Subsequently, each group was subdivided into three models according to the transmucosal height (1, 2, and 3 mm). A static oblique load at an angle of 45 degrees to the long axis of the implant in palatal-buccal direction of 150 and 75 N was applied for multiple and single implant-supported prosthesis, respectively. The implants and abutments were assessed according to the equivalent Von Mises stress analyses while the bone and ceramics were analyzed through maximum and minimum principal stresses. The total deformation values increased in all models, while the transmucosal height was augmented. The transmucosal height of the abutments influences the stress values at the bone, ceramics, implants, and abutments of both the single and multiple implant-supported prostheses, with the transmucosal height of 1 mm showing the lowest stress values.

Wear of the Primary WaveOne single file when shaping vestibular root canals of first maxillary molar.

BACKGROUND: It is very important for a clinician to know the increased wear of mechanized files when establishing endodontic therapy. The aim of this study was to check the wear of the Primary WaveOne file upon shaping two, four and six maxillary molar vestibular canals. MATERIAL AND METHODS: The deterioration of 40 files, divided into four groups, was evaluated microscopically: group 1, control (unused); group 2, two canals; group 3, four canals; and group 4, six canals. After instrumentation, the files were embedded in resin and sectioned at their apical third into three equal parts. To analyze the wear of edges in the different sections, AutoCAD software was used and analysis of variance (ANOVA) was then performed to compare the mean rake angles. RESULTS: The files with two and four uses showed slight wear, whereas those with six applications showed significant wear (p<0.05). CONCLUSIONS: Primary WaveOne files can be used in up to four root canals without their edges losing effectiveness. Key words:Files wear, reciprocating motion, shaping capacity, WaveOne.

Quantitation of Mandibular Symphysis Bone as Source of Bone Grafting: Description in Class I and Class III Skeletal Conditions.

The aim of this study was to quantify the cortical and cancellous bone in the mandibular symphysis and relate it to the teeth and to the skeletal class. A descriptive study was conducted using cone beam computerized tomography (CBCT). Class I and class III subjects were included, defined according to dental occlusion and cephalogram results. Linear measurements were taken on the CBCT of the mandibular canines, lateral incisors, and central incisors, where the analysis was related to the axial and apical axes considering the bone in relation to the dental area. With previous definitions, an observer took 2 measurements of the height of the mandibular symphysis, cortical bone of the buccal and lower region, and thickness of cancellous bone at different levels; the correlation coefficient between the first and second measurement was 0.99 and presented P = .001. The results were analyzed with analysis of variance and Tukey's honest significant difference test, with P < .05 being statistically significant. The symphysis height was significantly greater in class III subjects. The cortical bone was an average 1.67 ± 0.44 mm in vertical distance in the skeletal class I group and 1.74 ± 0.47 mm in the class III group. The cancellous bone had an average width of 5.03 ± 1.94 mm in the skeletal class I group and 4.74 ± 2.05 mm in the class III group. It was observed that cancellous bone was significantly thicker at the incisor level than at the canine level. There were anatomical differences between skeletal class I and class III subjects, although the clinical significance may be questionable. With the values from these analyses, it may be concluded that there are no significant differences in quantitation of the cortical and cancellous bone in the anterior mandibular symphysis.

Improving practice guidelines for the treatment of denture-related erythematous stomatitis: a study protocol for a randomized controlled trial.

BACKGROUND: Denture-related erythematous stomatitis (DES) is a chronic biofilm-mediated disease, affecting one in every three complete denture wearers. Antifungals are the treatment most commonly prescribed by oral health professionals, based on the belief that colonization by Candida spp. is the main cause of DES. However, high recurrence rates and adverse effects are commonly observed, prompting the need for practice guidelines regarding treatment. Results from our pilot study demonstrate that palatal brushing can reduce the palatal inflammation and potentially associated Candida carriage without any need for antifungal therapy. The objective of this study is to validate these pilot results by means of a randomized controlled trial (RCT) and provide a practice guideline for clinicians. METHODS/DESIGN: A pragmatic, two-parallel-arm, multicenter RCT will be conducted in Canada, Brazil, and Chile. Fifty-two adult complete denture wearers presenting with moderate to severe DES will be allocated randomly to two groups: the Intervention arm will consist of palatal brushing and standard oral and denture hygiene measures, while the Control arm will include only standard oral and denture hygiene measures. The study outcome will be the oral Candida carriage. Participants will be assessed at baseline, and at 3 and 6 months post intervention. Descriptive, bivariate, and mixed models with repeated measures will be performed following the intention-to-treat principle. DISCUSSION: This pragmatic RCT will serve to provide a clinical practice guideline regarding the use of preventive measures in the treatment of biofilm-mediated oral diseases. Moreover, it will have a great impact on reducing the harm of antifungal overtreatment on patients suffering from DES. TRIAL REGISTRATION: ClinicalTrials.gov, NCT02686632 . Registered on 15 February 2016.