Selective dynamic band gap tuning in metamaterials using graded photoresponsive resonator arrays.

The introduction of metamaterials has provided new possibilities to manipulate the propagation of waves in different fields of physics, ranging from electromagnetism to acoustics. However, despite the variety of configurations proposed so far, most solutions lack dynamic tunability, i.e. their functionality cannot be altered post-fabrication. Our work overcomes this limitation by employing a photo-responsive polymer to fabricate a simple metamaterial structure and enable tuning of its elastic properties using visible light. The structure of the metamaterial consists of graded resonators in the form of an array of pillars, each giving rise to different resonances and transmission band gaps. Selective laser illumination can then tune the resonances and their frequencies individually or collectively, thus yielding many degrees of freedom in the tunability of the filtered or transmitted wave frequencies, similar to playing a keyboard, where illuminating each pillar corresponds to playing a different note. This concept can be used to realize low-power active devices for elastic wave control, including beam splitters, switches and filters.This article is part of the theme issue 'Current developments in elastic and acoustic metamaterials science (Part 2)'.

Proof of Concept for an Ultrasensitive Technique to Detect and Localize Sources of Elastic Nonlinearity Using Phononic Crystals.

The appearance of nonlinear effects in elastic wave propagation is one of the most reliable and sensitive indicators of the onset of material damage. However, these effects are usually very small and can be detected only using cumbersome digital signal processing techniques. Here, we propose and experimentally validate an alternative approach, using the filtering and focusing properties of phononic crystals to naturally select and reflect the higher harmonics generated by nonlinear effects, enabling the realization of time-reversal procedures for nonlinear elastic source detection. The proposed device demonstrates its potential as an efficient, compact, portable, passive apparatus for nonlinear elastic wave sensing and damage detection.

Multiscale static and dynamic mechanical study of the Turritella terebra and Turritellinella tricarinata seashells.

Marine shells are designed by nature to ensure mechanical protection from predators and shelter for molluscs living inside them. A large amount of work has been done to study the multiscale mechanical properties of their complex microstructure and to draw inspiration for the design of impact-resistant biomimetic materials. Less is known regarding the dynamic behaviour related to their structure at multiple scales. Here, we present a combined experimental and numerical study of the shells of two different species of gastropod sea snail belonging to the Turritellidae family, featuring a peculiar helicoconic shape with hierarchical spiral elements. The proposed procedure involves the use of micro-computed tomography scans for the accurate determination of geometry, atomic force microscopy and nanoindentation to evaluate local mechanical properties, surface morphology and heterogeneity, as well as resonant ultrasound spectroscopy coupled with finite element analysis simulations to determine global modal behaviour. Results indicate that the specific features of the considered shells, in particular their helicoconic and hierarchical structure, can also be linked to their vibration attenuation behaviour. Moreover, the proposed investigation method can be extended to the study of other natural systems, to determine their structure-related dynamic properties, ultimately aiding the design of bioinspired metamaterials and of structures with advanced vibration control.

Creation of pure non-crystalline diamond nanostructures via room-temperature ion irradiation and subsequent thermal annealing.

Carbon exhibits a remarkable range of structural forms, due to the availability of sp3, sp2 and sp1 chemical bonds. Contrarily to other group IV elements such as silicon and germanium, the formation of an amorphous phase based exclusively on sp3 bonds is extremely challenging due to the strongly favored formation of graphitic-like structures at room temperature and pressure. As such, the formation of a fully sp3-bonded carbon phase requires an extremely careful (and largely unexplored) definition of the pressure and temperature across the phase diagram. Here, we report on the possibility of creating full-sp3 amorphous nanostructures within the bulk crystal of diamond with room-temperature ion-beam irradiation, followed by an annealing process that does not involve the application of any external mechanical pressure. As confirmed by numerical simulations, the (previously unreported) radiation-damage-induced formation of an amorphous sp2-free phase in diamond is determined by the buildup of extremely high internal stresses from the surrounding lattice, which (in the case of nanometer-scale regions) fully prevent the graphitization process. Besides the relevance of understanding the formation of exotic carbon phases, the use of focused/collimated ion beams discloses appealing perspectives for the direct fabrication of such nanostructures in complex three-dimensional geometries.

Evidence of light guiding in ion-implanted diamond.

We demonstrate the feasibility of fabricating light-waveguiding microstructures in bulk single-crystal diamond by means of direct ion implantation with a scanning microbeam, resulting in the modulation of the refractive index of the ion-beam damaged crystal. Direct evidence of waveguiding through such buried microchannels is obtained with a phase-shift micro-interferometric method allowing the study of the multimodal structure of the propagating electromagnetic field. The possibility of defining optical and photonic structures by direct ion writing opens a range of new possibilities in the design of quantum-optical devices in bulk single-crystal diamond.

Self-similarity of waiting times in fracture systems.

Experimental and numerical results are presented for a fracture experiment carried out on a fiber-reinforced element under flexural loading, and a statistical analysis is performed for acoustic emission waiting-time distributions. By an optimization procedure, a recently proposed scaling law describing these distributions for different event magnitude scales is confirmed by both experimental and numerical data, thus reinforcing the idea that fracture of heterogeneous materials has scaling properties similar to those found for earthquakes. Analysis of the different scaling parameters obtained for experimental and numerical data leads us to formulate the hypothesis that the type of scaling function obtained depends on the level of correlation among fracture events in the system.

Proof of concept of a frequency-preserving and time-invariant metamaterial-based nonlinear acoustic diode.

Acoustic filters and metamaterials have become essential components for elastic wave control in applications ranging from ultrasonics to noise abatement. Other devices have been designed in this field, emulating their electromagnetic counterparts. One such case is an acoustic diode or rectifier, which enables one-way wave transmission by breaking the wave equation-related reciprocity. Its achievement, however, has proved to be rather problematic, and current realizations display a number of shortcomings in terms of simplicity and versatility. Here, we present the design, fabrication and characterization of a device able to work as an acoustic diode, a switch and a transistor-like apparatus, exploiting symmetry-breaking nonlinear effects like harmonic generation and wave mixing, and the filtering capabilities of metamaterials. This device presents several advantages compared with previous acoustic diode realizations, including versatility, time invariance, frequency preserving characteristics and switchability. We numerically evaluate its efficiency and demonstrate its feasibility in a preliminary experimental realization. This work may provide new opportunities for the practical realization of structural components with one-way wave propagation properties.

Refractive index variation in a free-standing diamond thin film induced by irradiation with fully transmitted high-energy protons.

Ion irradiation is a widely employed tool to fabricate diamond micro- and nano-structures for applications in integrated photonics and quantum optics. In this context, it is essential to accurately assess the effect of ion-induced damage on the variation of the refractive index of the material, both to control the side effects in the fabrication process and possibly finely tune such variations. Several partially contradictory accounts have been provided on the effect of the ion irradiation on the refractive index of single crystal diamond. These discrepancies may be attributable to the fact that in all cases the ions are implanted in the bulk of the material, thus inducing a series of concurrent effects (volume expansion, stress, doping, etc.). Here we report the systematic characterization of the refractive index variations occurring in a 38 µm thin artificial diamond sample upon irradiation with high-energy (3 MeV and 5 MeV) protons. In this configuration the ions are fully transmitted through the sample, while inducing an almost uniform damage profile with depth. Therefore, our findings conclusively identify and accurately quantify the change in the material polarizability as a function of ion beam damage as the primary cause for the modification of its refractive index.

Direct measurement and modelling of internal strains in ion-implanted diamond.

We present a phenomenological model and finite element simulations to describe the depth variation of mass density and strain of ion-implanted single-crystal diamond. Several experiments are employed to validate the approach: firstly, samples implanted with 180 keV B ions at relatively low fluences are characterized using high-resolution x-ray diffraction; secondly, the mass density variation of a sample implanted with 500 keV He ions, well above its amorphization threshold, is characterized with electron energy loss spectroscopy. At high damage densities, the experimental depth profiles of strain and density display a saturation effect with increasing damage and a shift of the damage density peak towards greater depth values with respect to those predicted by TRIM simulations, which are well accounted for in the model presented here. The model is then further validated by comparing transmission electron microscopy-measured and simulated thickness values of a buried amorphous carbon layer formed at different depths by implantation of 500 keV He ions through a variable-thickness mask to simulate the simultaneous implantation of ions at different energies.

Absceso gluteo gonococico fistulizado en un diabetico. / Gonoccocal abscess with fistula of the buttock in a diabetic patient

Se presenta un caso de absceso gonococico fistulizado en un diabetico. Se recuerdan las principales caracteristicas de este cuadro y se destaca el deterioro de la inmunidad asociado a diabetes como factores desencadenantes