Targeted radionuclide therapy with RAFT-RGD radiolabelled with (90)Y or (177)Lu in a mouse model of αvß3-expressing tumours.

PURPOSE: The αvß3 integrin plays an important role in tumour-induced angiogenesis, tumour proliferation, survival and metastasis. The tetrameric RGD-based peptide, regioselectively addressable functionalized template-(cyclo-[RGDfK])4 (RAFT-RGD), specifically targets the αvß3 integrin in vitro and in vivo. The aim of this study was to evaluate the therapeutic potential of RAFT-RGD radiolabelled with ß(-) emitters in a nude mouse model of αvß3 integrin-expressing tumours. METHODS: Biodistribution and SPECT/CT imaging studies were performed after injection of (90)Y-RAFT-RGD or (177)Lu-RAFT-RGD in nude mice subcutaneously xenografted with αvß3 integrin-expressing U-87 MG cells. Experimental targeted radionuclide therapy with (90)Y-RAFT-RGD or (177)Lu-RAFT-RGD and (90)Y-RAFT-RAD or (177)Lu-RAFT-RAD (nonspecific controls) was evaluated by intravenous injection of the radionuclides into mice bearing αvß3 integrin-expressing U-87 MG tumours of different sizes (small or large) or bearing TS/A-pc tumours that do not express αvß3. Tumour volume doubling time was used to evaluate the efficacy of each treatment. RESULTS: Injection of 37 MBq of (90)Y-RAFT-RGD into mice with large αvß3-positive tumours or 37 MBq of (177)Lu-RAFT-RGD into mice with small αvß3-positive tumours caused significant growth delays compared to mice treated with 37 MBq of (90)Y-RAFT-RAD or 37 MBq of (177)Lu-RAFT-RAD or untreated mice. In contrast, injection of 30 MBq of (90)Y-RAFT-RGD had no effect on the growth of αvß3-negative tumours. CONCLUSION: (90)Y-RAFT-RGD and (177)Lu-RAFT-RGD are potent agents targeting αvß3-expressing tumours for internal targeted radiotherapy.

Development of a selective cell capture and release assay: impact of clustered RGD ligands.

There is a growing interest in isolating tumor cells from biological samples. Considering that circulating tumor cells can be rare in blood, it appears challenging to capture these cells onto a surface with high selectivity and sensitivity. In the present paper, we describe the design of functionalized surfaces aimed at selectively capturing tumor cells by using an RGD peptide ligand with either a tetrameric or a monomeric presentation. ß-Cyclodextrin-coated self-assembled monolayers were used as platforms for the binding of RGD ligands endowed with a redox ferrocene cluster. The dissociation of the inclusion complex on the surface accounts for the release of the captured cells upon the electrochemical oxidation of ferrocene. For this purpose, we determined suitable RGD densities for both monovalent and tetravalent ligand presentations. The results indicate that the clustered RGD architecture efficiently improves selective cell capture at a very low RGD surface density (∼10 RGD per µm2) compared to the monovalent presentation (∼1000 RGD per µm2).

Controlled surface density of RGD ligands for cell adhesion: evidence for ligand specificity by using QCM-D.

RGD peptides (Arg-Gly-Asp) are known to promote cell adhesion. As a consequence, numerous materials have been functionalized using these peptides for several medical applications. We report herein the controlled functionalization of surfaces to study the influence of RGD density on cell selectivity. For this purpose, we selected a quartz crystal microbalance QCM-D as this technique allows real-time monitoring of cell adhesion to RGD surfaces. We observed that a critical spacing of nearly 40 nm between RGD ligands is required to observe selective cell adhesion whereas a higher density is not specific.

Drug development in oncology assisted by noninvasive optical imaging.

Early and accurate detection of tumors, like the development of targeted treatments, is a major field of research in oncology. The generation of specific vectors, capable of transporting a drug or a contrast agent to the primary tumor site as well as to the remote (micro-) metastasis would be an asset for early diagnosis and cancer therapy. Our goal was to develop new treatments based on the use of tumor-targeted delivery of large biomolecules (DNA, siRNA, peptides, or nanoparticles), able to induce apoptosis while dodging the specific mechanisms developed by tumor cells to resist this programmed cell death. Nonetheless, the insufficient effectiveness of the vectorization systems is still a crucial issue. In this context, we generated new targeting vectors for drug and biomolecules delivery and developed several optical imaging systems for the follow-up and evaluation of these vectorization systems in live mice. Based on our recent work, we present a brief overview of how noninvasive optical imaging in small animals can accelerate the development of targeted therapeutics in oncology.

Molecular imaging of vascular cell adhesion molecule-1 expression in experimental atherosclerotic plaques with radiolabelled B2702-p.

PURPOSE: VCAM-1 plays a major role in the chronic inflammatory processes present in vulnerable atherosclerotic plaques. The residues 75-84 (B2702-p) and 84-75/75-84 (B2702-rp) of the major histocompatibility complex-1 (MHC-1) molecule B2702 were previously shown to bind specifically to VCAM-1. We hypothesised that radiolabelled B2702-p and B2702-rp might have potential for the molecular imaging of vascular cell adhesion molecule-1 (VCAM-1) expression in atherosclerotic plaques. METHODS: Preliminary biodistribution studies indicated that 125I-B2702-rp was unsuitable for in vivo imaging owing to extremely high lung uptake. 123I- or 99mTc-labelled B2702-p was injected intravenously to Watanabe heritable hyperlipidaemic rabbits (WHHL, n=6) and control animals (n=6). After 180 min, aortas were harvested for ex vivo autoradiographic imaging, gamma-well counting, VCAM-1 immunohistology and Sudan IV lipid staining. RESULTS: Robust VCAM-1 immunostaining was observed in Sudan IV-positive and to a lesser extent in Sudan IV-negative areas of WHHL animals, whereas no expression was detected in control animals. Significant 2.9-fold and 1.9-fold increases in 123I-B2702-p and 99mTc-B2702-p aortic-to-blood ratios, respectively, were observed between WHHL and control animals (p<0.05). Tracer uptake on ex vivo images co-localised with atherosclerotic plaques. Image quantification indicated a graded increase in 123I-B2702-p and 99mTc-B2702-p activities from control to Sudan IV-negative and to Sudan IV-positive areas, consistent with the observed pattern of VCAM-1 expression. Sudan IV-positive to control area tracer activity ratios were 17.0+/-9.0 and 5.9+/-1.8 for 123I-B2702-p and 99mTc-B2702-p, respectively. CONCLUSION: Radiolabelled B2702-p is a potentially useful radiotracer for the molecular imaging of VCAM-1 in atherosclerosis.

Photoactivated DNA cleavage by compounds structurally related to the bithiazole moiety of bleomycin.

The syntheses of several novel halogenated bithiazoles structurally related to the bithiazole moiety of bleomycin A(5) are described. Also described is the ability of these compounds to mediate photoactivated DNA cleavage. Chlorinated bithiazole analogues were shown to be much more active than an analogous brominated derivative. DNA strand scission activity was strictly light dependent and was accompanied by dechlorination of the bithiazole nucleus, apparently in a stoichiometric fashion. Inhibition of DNA cleavage in the presence of DMSO, as well as photoaddition to 1-octene by both brominated and chlorinated bithiazole derivatives, suggest strongly that the initial step in photoactivated DNA cleavage involves homolysis of the thiazole carbon-halogen bond. The chlorinated bithiazoles were found to mediate sequence selective cleavage of a (32)P-end labeled DNA, although the selectivity observed was not the same as that of bleomycin itself. The implications of this observation are discussed.

A simple and sensitive method for in vitro quantitation of abasic sites in DNA.

A novel method for the quantitation of abasic sites (AP sites) in DNA is described. As abasic sites can be generated by controlled thermal treatment of base-modified DNA, this method can be used for estimation of the extent of DNA damage resulting from exposure to genotoxic agents. The method involves use of probe molecules 1 and 2 that contain a fluorescent label linked to an aminooxy group which reacts specifically with the aldehydic function of the ring-opened form of abasic sites. The two fluorescent probes 1 and 2 were found to react with 2-deoxyribose, a model substrate, at the optimum of pH 4.0. As spontaneous depurination occurs at low pH, the reactions with abasic DNA were carried out at neutral pH with an excess concentration of the probes. Studies with alkylated, depurinated calf thymus DNA showed that the method is selective and quantitative. Good correlations were found between the level of 7-methylguanine (7-MeGua), generated in vitro in DNA by the methylating agent dimethyl sulfate, and the amount of AP sites as determined by the method presented here. In addition, similar correlations were found when the assay was used to detect abasic sites in DNA isolated from rats treated with carcinogenic alkylating agents. In each case, the level of abasic sites, as expected, is slightly higher than the level of 7-MeGua which is known to represent about 70% of the total modifications of DNA following exposure to the methylating agent. This method may be useful not only in experimental settings but also in studies of DNA damage in humans resulting from chemotherapy or exposure to environmental agents.

Highly efficient synthesis of peptide-oligonucleotide conjugates: chemoselective oxime and thiazolidine formation.

A convergent strategy for the synthesis of peptide-oligonucleotide conjugates (POC) is presented. Chemoselective ligation of peptide to oligonucleotide was accomplished by oxime and thiazolidine formation. Oxime conjugation was performed by treating an oxyamine-containing peptide with an aldehyde-containing oligonucleotide or vice versa. Ligation by thiazolidine formation was achieved by coupling a peptide, acylated with a cysteine residue, to an oligonucleotide that was derivatised by an aldehyde function. For both approaches, the conjugates were obtained in good yield without the need for a protection strategy and under mild aqueous conditions. Moreover, the oxime ligation proved useful for directly conjugating duplex oligonucleotides. Combined with molecular biology tools, this methodology opens up new prospects for post-functionalisation of high-molecular-weight DNA structures.