Water masses surface temperatures assessment and their effect on surrounding environment.

The aim of this study was to evaluate the effect of water masses on the surface temperature with direct impact on the surrounding area. Three systems were used for the study: a fully vegetated system (subsurface flow constructed wetland (CW)), a lake with no vegetation and a lake partially vegetated with Lemna minor. Infrared thermography was applied for the different systems analysis, allowing the determination of the surface temperature spatial distribution. In general, the presence of plants and water in the analyzed systems contributed to lowering the surface temperatures when comparing to its surroundings. Differences up to about 22 °C were observed in the temperature between the CW canopy and the surrounding soil, and up to about 19 °C between the lake and the surrounding border. Different plant species (Canna flaccida, Canna indica and Zantedeschia aethiopica) inhabiting the CW were also compared and slightly higher average surface temperatures were observed for C. indica. The above mentioned results are relevant in terms of supporting a strategy for water systems inclusion, for example a lake or a CW, in a site as means of having influence in the surface temperature and to some extent in the heat island effect supporting a sustainable environmental management.

Growing substrates for aromatic plant species in green roofs and water runoff quality: pilot experiments in a Mediterranean climate.

Green roof technology has evolved in recent years as a potential solution to promote vegetation in urban areas. Green roof studies for Mediterranean climates, where extended drought periods in summer contrast with cold and rainy periods in winter, are still scarce. The present research study assesses the use of substrates with different compositions for the growth of six aromatic plant species - Lavandula dentata, Pelargonium odoratissimum, Helichrysum italicum, Satureja montana, Thymus caespititius and T. pseudolanuginosus, during a 2-year period, and the monitoring of water runoff quality. Growing substrates encompassed expanded clay and granulated cork, in combination with organic matter and crushed eggshell. These combinations were adequate for the establishment of all aromatic plants, allowing their propagation in the extensive system located on the 5th storey. The substrate composed of 70% expanded clay and 30% organic matter was the most suitable, and crushed eggshell incorporation improved the initial plant establishment. Water runoff quality parameters - turbidity, pH, conductivity, NH4+, NO3-, PO43- and chemical oxygen demand - showed that it could be reused for non-potable uses in buildings. The present study shows that selected aromatic plant species could be successfully used in green roofs in a Mediterranean climate.

Contributions to the design of rainwater harvesting systems in buildings with green roofs in a Mediterranean climate.

Green roofs (GRs) are becoming a trend in urban areas, favouring thermal performance of buildings, promoting removal of atmospheric pollutants, and acting as possible water collection spots. Rainwater harvesting systems in buildings can also contribute to the management of stormwater runoff reducing flood peaks. These technologies should be enhanced in Mediterranean countries where water scarcity is increasing and the occurrence of extreme events is becoming very significant, as a result of climate change. An extensive pilot GR with three aromatic plant species, Satureja montana, Thymus caespititius and Thymus pseudolanuginosus, designed to study several parameters affecting rainwater runoff, has been in operation for 12 months. Physico-chemical analyses of roof water runoff (turbidity, pH, conductivity, NH4(+), NO3(-), PO4(3-), chemical oxygen demand) have shown that water was of sufficient quality for non-potable uses in buildings, such as toilet flushing. An innovative approach allowed for the development of an expression to predict a 'monthly runoff coefficient' of the GR system. This parameter is essential when planning and designing GRs combined with rainwater harvesting systems in a Mediterranean climate. This study is a contribution to improving the basis for the design of rainwater harvesting systems in buildings with extensive GRs under a Mediterranean climate.

Use of constructed wetland systems with Arundo and Sarcocornia for polishing high salinity tannery wastewater.

Treatment of tannery wastewater is problematic due to high and variable concentrations of complex pollutants often combined with high salinity levels. Two series of horizontal subsurface flow constructed wetlands (CWs) planted with Arundo donax and Sarcocornia fruticosa were set up after a conventional biological treatment system operating at a tannery site. The aim of the CWs was polishing organics and nitrogen from the high salinity effluent (2.2-6.6 g Cl(-) L(-1)). Both plant species established and grew well in the CW. Arundo, however, had more vigorous growth and a higher capacity to take up nutrients. The CWs were efficient in removing COD and BOD(5) with removal efficiencies varying between 51 and 80% for COD (inlet: 68-425 mg L(-1)) and between 53 and 90% for BOD(5) (inlet: 16-220 mg L(-1)). Mass removal rates were up to 615 kg COD ha(-1) d(-1) and 363 BOD(5) kg ha(-1) d(-1). Removal efficiencies were 40-93% for total P, 31-89% for NH(4)(+) and 41-90% for Total Kjeldahl Nitrogen. CW systems planted with salt tolerant plant species are a promising solution for polishing saline secondary effluent from the tannery industry to levels fulfilling the discharge standards.

Green Roofs Towards Circular and Resilient Cities.

Green roofs are gaining interest as nature-based solutions (NBS) to counteract with several environmental and socio-economic problems associated to urban sprawl and climate change. The challenge is to transform the built environment through the inclusion of NBS. Taking advantage of the existing space in the top of the buildings, the integration of green roofs will support the cities' transition towards circularity and resilience. They provide several ecosystem services and can act as multifunctional and decentralized units. In order to boost these services, green roofs need to be effectively incorporated and replicated in the urban landscape. Different configuration of systems may be considered depending on the challenges that the city foresees. To fully implement green roofs, it is important that (i) barriers are identified and overcome, (ii) standardization is set to grant liability, (iii) policies, incentives, and strategies are properly established, (iv) organizations delivering NBS services are leveraged, and (v) awareness and dissemination promotion, as investment in education, are considered. This paper intends to give an overview of the importance of green roof integration in the urban environment considering the dimensions of the building and the city, having underlined their contribution to circularity and cities' resilience.

Glyphosate in Portuguese Adults - A Pilot Study.

BACKGROUND: Glyphosate is a broad-spectrum biocide and the active ingredient in the most widely used herbicides worldwide. Since 2015, when the International Agency for Research on Cancer classified it as a Class 2A carcinogen, global interest in this chemical spiked particularly as regards exposure of the general population. OBJECTIVE: An exploratory glyphosate exposure assessment was conducted among Portuguese adults. METHODS: Self-selected participants provided first morning urine which was tested for glyphosate and its metabolite aminomethylphosphonic acid (AMPA) at two distinct periods of time, by two different laboratories using gas chromatography with tandem mass spectrometry (GC-MS-MS) and high performance liquid chromatography linked to triple quadrupole mass spectrometry (HPLC-MS/MS), respectively. RESULTS: In the first round of testing 28% and 50% presented detectable levels of glyphosate and AMPA respectively, with median values of 0.25 and 0.16 µg/L. Systematically available internal dose values were 8.20E-06 mg/Kg (glyphosate) and 5.04-05 mg/Kg (AMPA). In the second round 73% and 97% presented detectable levels of glyphosate and AMPA respectively with median values of 0.13 and 0.10 µg/L. Systematically available internal dose values were 4.00E-06 mg/Kg (glyphosate) and 3.00E-06 mg/Kg (AMPA). CONCLUSIONS: Glyphosate exposure was detected among Portuguese adults, with percentages of glyphosate and AMPA contaminated urine in both rounds of testing and above values from previous studies in other European countries. Systematically available internal doses values were below EFSA's risk assessment values (ADI or AOEL), and as such, the concentration values measured in this study are not per se a human health problem. Even though there were study limitations, it is the first assessment in Portugal and contributes to the overall knowledge map of glyphosate exposure in Europe.

Evaluation of different substrates to support the growth of Typha latifolia in constructed wetlands treating tannery wastewater over long-term operation.

The aim of this study was to investigate the performance of horizontal subsurface flow constructed wetlands planted with Typha latifolia treating tannery wastewater under long-term operation. Two expanded clay aggregates (Filtralite MR3-8-FMR and Filtralite NR3-8-FNR) and a fine gravel-FG were used as substrate for the constructed wetland units plus one unit with FMR was left as an unvegetated control. The systems were subject to three hydraulic loadings, 18, 8 and 6cmd(-1), and to periods of interruption in the feed. The relationship between the substrate, plant development and removal efficiency, especially of organic matter, was investigated. Organic loadings up to 1800kg BOD(5)ha(-1)d(-1) and 3849kg COD ha(-1)d(-1) were applied leading to mass removals of up to 652kg BOD(5)ha(-1)d(-1) and 1869kg COD ha(-1)d(-1), respectively. The three different substrates were adequate for the establishment of T. latifolia, although the clay aggregates allowed for higher plant propagation levels. The units with FNR and FMR achieved significantly higher COD and BOD5 removal when compared to the FG and to the unplanted units. The systems proved to be tolerant to high organic loadings and to interruptions in feed suggesting this technology as a viable option for the biological treatment of tannery wastewater.

The effects of tannery wastewater on the development of different plant species and chromium accumulation in Phragmites australis.

Toxicity tests were performed to assess the effect of tannery wastewater with different treatment levels on two wetland plants, Phragmites australis and Typha latifolia, which are frequently used in constructed wetlands (CWs) for water treatment, and thus deepen the knowledge on their capacity to withstand the application of industrial wastewater. Trifolium pratense, a plant generally used as an indicator in toxicity tests, was included as a control. End points measured were germination percentage, shoot length, root elongation, and biomass growth of the plants. When tannery effluent, with a low treatment level, was supplied to the wetland plants germination occurred even at effluent concentrations of 100%, whereas germination of T. pratense was completely inhibited, almost invariably, at effluent concentration of 50%. Higher germination levels were achieved when the plants were exposed to effluent originating from the outlet of constructed wetland pilot units, allowing germination of all tested plants, indicating a significant decrease in its toxicity level. Experiments conducted with the same plants using different growing substrata as the germination matrix, namely expanded clay aggregates (Filtralite MR 3-8 and Filtralite NR 3-8) and two types of sand (fine gravel and standard sand) have shown that higher germination levels were achieved in standard sand and that P. australis was the plant species showing higher germination in all cases, reinforcing the robustness of this plant to environmental stress. The phytoextraction potential of P. australis, was evaluated by subjecting the plant to tannery wastewater supplemented with 50 and 150 mg Cr/L. After 6 weeks of exposure, levels up to 4825, 883, and 627 mg Cr/kg were found in the rhizome, shoot, and leaves, respectively, although phytotoxic signs in the plant were evident. This plant might not be considered a chromium hyperacumulator, but the potential to extract and accumulate this metal on its rhizomes is high.

Constructed wetland systems vegetated with different plants applied to the treatment of tannery wastewater.

Wastewaters from leather processing are very complex and lead to water pollution if discharged untreated, especially due to its high organic loading. In this study the survival of different plant species in subsurface horizontal flow constructed wetlands receiving tannery wastewater was investigated. Five pilot units were vegetated with Canna indica, Typha latifolia, Phragmites australis, Stenotaphrum secundatum and Iris pseudacorus, and a sixth unit was left as an unvegetated control. The treatment performance of the systems under two different hydraulic loading rates, 3 and 6 cmd(-1), was assessed. COD was reduced by 41-73% for an inlet organic loading varying between 332 and 1602 kgha(-1)d(-1) and BOD(5) was reduced by 41-58% for an inlet organic loading varying between 218 and 780 kgha(-1)d(-1). Nutrient removal occurred to lower extents. Phragmites australis and Typha latifolia were the only plants that were able to establish successfully. Despite the high removal of organic content from the influent wastewater, during 17 months of operation, no significant differences in performance were observed between units.

Constructed wetlands for tannery wastewater treatment in Portugal: ten years of experience.

Wastewaters from tannery industry are complex in composition and providing adequate treatment can be difficult. Constructed wetlands (CW) are regarded as an alternative treatment to the conventional biological systems, as a developing cost-effective and environmentally friendly phytoremediation technology. The present review compiles and integrates information on CWs technology for the needs of the tannery sector. The following issues arise as crucial for the implementation of such systems, namely i) an accurate wastewater characterization and an effective pretreatment before reaching the CW, ii) choosing the plants species better adapted to the imposed conditions, iii) substrate selection and iv) range of organic loadings applied. The examples practiced in Portugal give indication that horizontal subsurface flow systems, with expanded clay media, are a suitable option to be considered when dealing with high organic loading tannery wastewater (up to c.a. 3800 kgCODha(-1)d(-1)), being resilient to a wide range of hydraulic variations. Plants such as Phragmites and Typha have shown to be adequate for tannery wastewater depuration, with Arundo donax proving resilient to high salinity wastewaters. The flexibility of implementation allows the CW to be adapted to different sites with different configurations, being suitable as main secondary or tertiary treatment stage.

Toxicity of high salinity tannery wastewater and effects on constructed wetland plants.

The toxicity of high salinity tannery wastewater produced after an activated sludge secondary treatment on the germination and seedling growth of Trifolium pratense, a species used as indicator in toxicity tests, was evaluated. Growth was inhibited by wastewater concentrations >25% and undiluted effluent caused a complete germination inhibition. Constructed wetlands (CWs) with Arundo donax or Sarcocornia fruticosa were envisaged to further polish this wastewater. Selection of plant species to use in CWs for industrial wastewater treatment is an important issue, since for a successful establishment they have to tolerate the often harsh wastewater composition. For that, the effects of this wastewater on the growth of Arundo and Sarcocornia were assessed in pot assays. Plants were subject to different wastewater contents (0/50/100%), and both were resilient to the imposed conditions. Arundo had higher growth rates and biomass than Sarcocornia and may therefore be the preferred species for use in CWs treating tannery wastewater. CWs planted with the above mentioned plants significantly decreased the toxicity of the wastewater, as effluent from the CWs outlet stimulated the growth of Trifolium at concentrations <50%, and seed germination and growth even occurred in undiluted effluent.

Treatment of industrial wastewater with two-stage constructed wetlands planted with Typha latifolia and Phragmites australis.

Industrial wastewater treatment comprises several processes to fulfill the discharge permits or to enable the reuse of wastewater. For tannery wastewater, constructed wetlands (CWs) may be an interesting treatment option. Two-stage series of horizontal subsurface flow CWs with Phragmites australis (UP series) and Typha latifolia (UT series) provided high removal of organics from tannery wastewater, up to 88% of biochemical oxygen demand (BOD(5)) (from an inlet of 420 to 1000 mg L(-1)) and 92% of chemical oxygen demand (COD) (from an inlet of 808 to 2449 mg L(-1)), and of other contaminants, such as nitrogen, operating at hydraulic retention times of 2, 5 and 7 days. No significant (P<0.05) differences in performance were found between both the series. Overall mass removals of up to 1294 kg COD ha(-1)d(-1) and 529 kg BOD(5)ha(-1)d(-1) were achieved for a loading ranging from 242 to 1925 kg COD ha(-1)d(-1) and from 126 to 900 kg BOD(5)ha(-1)d(-1). Plants were resilient to the conditions imposed, however P. australis exceeded T. latifolia in terms of propagation.

Changes in the bacterial community structure in two-stage constructed wetlands with different plants for industrial wastewater treatment.

This study focused on the diversity of bacterial communities from two series of two-stage constructed wetlands (CWs) treating tannery wastewater, under different hydraulic conditions. Series were separately planted with Typha latifolia and Phragmites australis in expanded clay aggregates and operated for 31 months. The effect of plant species, hydraulic loading and unit stage on bacterial communities was addressed through bacterial enumeration and denaturating gradient gel electrophoresis (DGGE). Diverse and distinct bacterial communities were found in each system unit, which was related in part to the type of plant and stage position (first or second unit in the series). Numerical analysis of DGGE profiles showed high diversity in each unit with an even distribution of species. No clear relation was established between the sample collection time, hydraulic loading applied and the bacterial diversity. Isolates retrieved from plant roots and substrates of CWs were affiliated with gamma-Proteobacteria, Firmicutes, alpha-Proteobacteria, Sphingobacteria, Actinobacteria and Bacteroidetes. Both series were effective in removing organic matter from the inlet wastewater, however, based on batch degradation experiments it seems that biodegradation was limited by the recalcitrant properties of the wastewater.