RESUMEN
BACKGROUND: Halitosis in children implies psychosocial repercussions. Risk factors associated with this condition are unclear, and detection methods are inaccurate. AIM: To quantify the levels of sulfur-like compounds in children with asthma and healthy children from a novel validated assay, and to establish the risk factors related to halitosis. DESIGN: One hundred and twenty-eight individuals (63 healthy and 65 asthmatic) from 3 to 17 years of age were tested using a passive colorimetric sensor to measure the levels of sulfur-like compounds in breath and saliva. Information was collected on oral hygiene habits, gingival and dental health, breathing type, and dental malocclusion. RESULTS: The mean values of hydrogen sulfide were 4.0 ± 6.8 and 19.7 ± 12.2 ppbv (parts per billion in volume) in the control and asthmatic groups, respectively (p < .001). The presence of higher concentrations of sulfur compounds was significantly associated (p < .05) with the presence of gingival inflammation, tongue coating, dental plaque, mouth breathing, hypomineralization, age, tongue brushing, and the use of dental floss. CONCLUSION: The level of sulfur in breath and saliva was significantly higher in patients with asthma. These results can serve as a precedent to raise awareness among paediatricians and parents about oral hygiene care in children and adolescents.
RESUMEN
Carbon black nanomaterial (CB-NM), as an industrial product with a large number of applications, poses a high risk of exposure, and its impact on health needs to be assessed. The most common testing platform for engineered (E)NMs is in vitro toxicity assessment, which requires prior ENM dispersion, stabilization, and characterization in cell culture media. Here, asymmetric flow field-flow fractionation (AF4) coupled to UV-Vis and dynamic light scattering (DLS) detectors in series was used for the study of CB dispersions in cell culture media, optimizing instrumental variables and working conditions. It was possible to disperse CB in a non-ionic surfactant aqueous solution due to the steric effect provided by surfactant molecules attached on the CB surface which prevented agglomeration. The protection provided by the surfactant or by culture media alone was insufficient to ensure good dispersion stability needed for carrying out in vitro toxicity studies. On the other hand, cell culture media in combination with the surfactant improved dispersion stability considerably, enabling the generation of shorter particles and a more favourable zeta potential magnitude, leading to greater stability due to electrostatic repulsion. It was demonstrated that the presence of amino acids in the culture media improved the monodisperse nature and stability of the CB dispersions, and resulted in a turn towards more negative zeta potential values when the pH was above the amino acid isoelectric point (IEP). Culture media used in real cell culture scenarios were also tested, and in vitro toxicity assays were developed optimizing the compatible amount of surfactant.
Asunto(s)
Fraccionamiento de Campo-Flujo , Nanoestructuras , Surfactantes Pulmonares , Técnicas de Cultivo de Célula , Medios de Cultivo , Fraccionamiento de Campo-Flujo/métodos , Nanoestructuras/toxicidad , Nanoestructuras/química , Tamaño de la Partícula , Hollín/toxicidad , Tensoactivos/toxicidad , Punto IsoeléctricoRESUMEN
A chromatographic system based on in-tube SPME coupled to capillary LC-DAD has been used to study the synthesis of silver nanoparticles using polyphenols in different scenarios: excess of the reducing agent or of the silver salt, addition of the cationic surfactants, and thermal synthesis. The optimized synthesis conditions allowed to quantify the polyphenols used as reducing agents, such as Trolox and chlorogenic acid. Two chromatographic peaks with different absorption spectrum were monitored during the syntheses. Depending on the molar relationship, a linear relation between the area of the chromatographic peaks and the concentration of the silver or polyphenol was established. For stabilization of silver nanoparticles, different cationic surfactants were used allowing to evaluate the role of anion (chloride and bromide) and of the alkyl chain. The proposed methodology can be used to determine chlorogenic acid up to 3 mM with a detection limit of 34 µM at λ= 400 nm. Chlorogenic acid was determined in dietary products with successful results. Precision (RSD=10%) and recovery (97-100%) were also satisfactory.
Asunto(s)
Antioxidantes , Nanopartículas del Metal , Ácido Clorogénico , Microextracción en Fase Sólida/métodos , Plata/química , Nanopartículas del Metal/química , Límite de Detección , Cromatografía Liquida/métodos , Tensoactivos , PolifenolesRESUMEN
A colorimetric method for the estimation of the total content of cannabinoids in cannabis samples is proposed. The assay is based on the reaction of these compounds with the reagent Fast Blue B (FBB), which has been immobilized into polydimethylsiloxane (PDMS). The reaction and detection conditions have been established according to the results obtained for the individual cannabinoids Δ9-tetrahydrocannabidiol (THC), cannabidiol (CBD), and cannabinol (CBN), as well as for ethanolic extracts obtained from cannabis samples after ultrasonication. In contact with the extract and under basic conditions, the reagent diffuses from the PDMS device, producing a red-brown solution. The absorbances measured at 500 nm after only 1 min of exposure to the FBB/PDMS composites led to responses proportional to the amounts of the cannabinoids in the reaction media. Those absorbances have been then transformed in total cannabinoid content using CBD as a reference compound. The potential utility of the proposed conditions has been tested by analyzing different cannabis samples. The selectivity towards other plants and drugs has been also evaluated. The present method is proposed as a simple and rapid alternative to chromatographic methods for the estimation of the total content of cannabinoids.
Asunto(s)
Cannabidiol , Cannabinoides , Cannabis , Alucinógenos , Cannabinoides/análisis , Cannabis/química , Dronabinol/análisis , Colorimetría , Cannabinol/análisis , Cannabidiol/análisis , Agonistas de Receptores de CannabinoidesRESUMEN
Due to their simplicity, speed and low cost, chemical spot tests are increasingly demanded for the presumptive identification of illicit drugs in a variety of contexts such as point-of-care assistance or prosecution of drug trafficking. However, most of the colorimetric reactions used in these tests are, at best, drug class selective. Therefore, the development of tests based on chemical reactions with improved discrimination power is of great interest. In this work, we propose a new colorimetric assay for amphetamine (AMP) based on its reaction with solutions of alkaline gold bromide to form an insoluble yellow-orange derivative. The resulting suspensions are then filtered onto nylon membranes and the precipitate collected is used for the visual identification of AMP. The measurement of the absorbance of the membranes by diffuse reflectance spectroscopy also allows the quantification of AMP in a simple and rapid way, as demonstrated for different synthetic and drug street samples. On the basis of the results obtained, it was concluded that the proposed procedure is highly selective towards AMP, as this compound could be easily differentiated from other common drugs such as methamphetamine (MET), ephedrine (EPH), scopolamine (SCP) and cocaine (COC).
Asunto(s)
Anfetamina/análisis , Técnicas Biosensibles , Colorimetría/métodos , Drogas Ilícitas/análisis , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Espectroscopía Infrarroja por Transformada de Fourier , Detección de Abuso de Sustancias/métodosRESUMEN
This paper reports the fabrication and utility of a new solid sensor, which allows the quantitation of silver ions acting as catalyst at the low micromolar level. The optical sensor was prepared by incorporating both reagents, pyrogallol red (PGR) and 1,10-phenanthroline (Phen), in a nylon membrane. The effect of parameters in determining silver-catalyzed oxidation of PGR by persulfate in the presence of Phen as an activator was studied and optimized for achieving suitable sensitivity. Semiquantitative analysis can be performed by visual inspection of the color of the sensor by comparing it with standard responses and quantitative analysis can be carried out by its diffuse reflectance (DR) measurement or by a digital image-processing tool (GIMP) using a smartphone. The sensor exhibited a linear relationship toward Ag(I) concentrations ranging from 0.4 to 10 µM or 1-25 µM and limits of detection of 0.1 µM or 0.3 µM for incubation times of 50 and 30 min, respectively. The relative standard deviation achieved for several batches of sensors was around 2%. The analysis of water samples from tap and refrigerating circuits containing solid biocides, which leach silver ions, prove that this portable and sustainable sensor is successfully operational in real situations. Graphical abstract.
RESUMEN
Over the past years, a great effort has been devoted to the development of new sorbents that can be used to pack or to coat extractive capillaries for in-tube solid-phase microextraction (IT-SPME). Many of those efforts have been focused on the preparation of capillaries for miniaturized liquid chromatography (LC) due to the reduced availability of capillary columns with appropriate dimensions for this kind of system. Moreover, many of the extractive capillaries that have been used for IT-SPME so far are segments of open columns from the gas chromatography (GC) field, but the phase nature and dimensions are very limited. In particular, polar compounds barely interact with stationary GC phases. Capillary GC columns may also be unsuitable when highly selective extractions are needed. In this work, we provide an overview of the extractive capillaries that have been specifically developed for capillary LC (capLC) and nano LC (nanoLC) to enhance the overall performance of the IT-SPME, the chromatographic separation, and the detection. Different monolithic polymers, such as silica C18 and C8 polymers, molecularly imprinted polymers (MIPs), polymers functionalized with antibodies, and polymers reinforced with different types of carbon nanotubes, metal, and metal oxide nanoparticles (including magnetic nanoparticles), and restricted access materials (RAMs) will be presented and critically discussed.
Asunto(s)
Cromatografía Liquida/métodos , Mezclas Complejas/química , Contaminantes Ambientales/aislamiento & purificación , Compuestos Organofosforados/aislamiento & purificación , Hidrocarburos Policíclicos Aromáticos/aislamiento & purificación , Microextracción en Fase Sólida/métodos , Animales , Bacterias/química , Cromatografía Liquida/instrumentación , Agua Dulce/química , Humanos , Inmunoadsorbentes/química , Nanopartículas del Metal/química , Polímeros Impresos Molecularmente/química , Nanotubos de Carbono/química , Dióxido de Silicio/químicaRESUMEN
The Marquis test is the most frequently used spot color assay for the screening of unknown drugs such as amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-metilenedioxymethamphetamine, and morphine. However, this test involves the use of the toxic reagent formaldehyde, as well as the manipulation of concentrated sulfuric acid. Here, we report a new format of this test that improves the sustainability and safety for the operator by immobilizing formaldehyde into a polydimetylsiloxane composite. In contact with a solution (or suspension) of the suspected sample in sulfuric acid, the dispositive delivers formaldehyde and the reaction takes place in a few seconds. Under the proposed conditions, only small amounts of the drug (µg) are necessary to produce intense changes of color. In addition, the percentage of the drug in the sample can be established by obtaining pictures of the test vials and subsequent analysis of the digitalized images. The responses were linear for amphetamine-like drugs up to a concentration of 100 mg L-1, and the precision achieved was adequate (relative standard deviations, RSDs < 10%). The developed composites were tested for the determination of MDMA in several drug street samples, and a good correlation with the results obtained by a reference method based on liquid chromatography was found. The main advantages of the proposed approach over the traditional Marquis test format are better portability and safety for the operator at a lower cost and the possibility of using it for quantitative analysis.
Asunto(s)
Dimetilpolisiloxanos/química , Formaldehído/química , Alucinógenos/análisis , Drogas Ilícitas/análisis , N-Metil-3,4-metilenodioxianfetamina/análisis , Detección de Abuso de Sustancias/métodos , Colorimetría/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Límite de DetecciónRESUMEN
Nowadays, interest in using environmentally friendly materials is increasing in many fields. However, the rational design of sensors with biodegradable materials is a challenge. The main aim of this work is to show the possibility of using zein, a protein from corn, as a biodegradable and low-cost material for immobilizing, stabilizing, and delivering different kind of reagents for developing optical sensors. Enzymes, metallic salts, and aromatic and small organic compounds were tested. In addition, different techniques of immobilization, entrapment and adsorption, were used, and different formats, such as solid devices and also multiwell platforms, were proposed. The capacity of zein for immobilizing two reagents together, enzyme and substrate, into a multianalysis format was also shown. Two applications were developed as examples: a colorimetric assay based on a ferric hydroxamate reaction for ester drugs, which was applied in atropine determination in pills, and a fluorimetric enzymatic multiwell-plate biodevice applied in phosphate determination in human serum and urine. Zein demonstrated being not only a green alternative but also a versatile polymer for developing sensors from reagents with different natures in different formats and matrices, thereby resulting in different applications.
Asunto(s)
Técnicas Biosensibles/métodos , Zea mays/enzimología , Zeína/química , Atropina/análisis , Colorimetría/métodos , Enzimas Inmovilizadas/química , Humanos , Indicadores y Reactivos , Preparaciones Farmacéuticas/química , Fosfatos/sangre , Fosfatos/orina , Espectrometría de Fluorescencia/métodos , Zea mays/químicaRESUMEN
Because of its inherent qualities, in-tube solid-phase microextraction (IT-SPME) coupled on-line to nanoliquid chromatography (nanoLC) can be a very powerful tool to address the new challenges of analytical laboratories such as the analysis of traces of complex samples. This is the case of the detection of contact traces of drugs, especially cannabis. The main difficulties encountered in the analysis of traces of cannabis plants on surfaces are the low amount of sample available (typically < 1 mg), the complexity of the matrix, and the low percentages of cannabinoic compounds in the samples. In this work, a procedure is described for the detection of residues of cannabis on different surfaces based on the responses obtained by IT-SPME coupled to nanoLC with UV diode array detection (DAD) for the cannabinoids Δ8-tetrahydrocannabinol (THC), cannabidiol (CBD), and cannabinol (CBN); the proposed conditions can also be applied for quantitative purposes through the measurement of the percentage of THC, the most abundant cannabinoid in plants. The method is based on collecting the suspected drug samples with cotton swabs, followed by the extraction of the target compounds by ultrasound assisted extraction. The extracts are then separated and processed by IT-SPME-nanoLC. The proposed approach has been applied to the detection of traces of cannabis in different kind of items (plastic bags, office paper, aluminum foil, cotton cloths, and hand skin). Sample amounts as low as 0.08 mg have been collected and analysed for THC. The selectivity and effect of the storage conditions on the levels of THC have also been evaluated. The percentages of THC in the samples typically ranged from 0.6% to 2.8%, which means that amounts of this compound as low as 1â»2 µg were adequately detected and quantified. For the first time, the reliability of IT-SPME-nanoLC for the analysis of complex matrices such as cannabis plant extracts has been demonstrated.
Asunto(s)
Cannabinoides/análisis , Cannabis/química , Cromatografía de Gases y Espectrometría de Masas/métodos , Microextracción en Fase Sólida/métodos , Cannabidiol/análisis , Cannabinol/análisis , Dronabinol/análisis , Nanotecnología , Extractos Vegetales/análisisRESUMEN
We report the use of a chiral Cu(II) 3D metal-organic framework (MOF) based on the tripeptide Gly-l-His-Gly (GHG) for the enantioselective separation of metamphetamine and ephedrine. Monte Carlo simulations suggest that chiral recognition is linked to preferential binding of one of the enantiomers as a result of either stronger or additional H-bonds with the framework that lead to energetically more stable diastereomeric adducts. Solid-phase extraction of a racemic mixture by using Cu(GHG) as the extractive phase permits isolating >50% of the (+)-ephedrine enantiomer as target compound in only 4 min. To our knowledge, this represents the first example of a MOF capable of separating chiral polar drugs.
Asunto(s)
Cobre/química , Efedrina/aislamiento & purificación , Estructuras Metalorgánicas/química , Metanfetamina/aislamiento & purificación , Péptidos/química , Efedrina/química , Metanfetamina/química , Simulación de Dinámica Molecular , Estructura Molecular , Método de Montecarlo , EstereoisomerismoRESUMEN
Currently, transmission electron microscopy (TEM) is the main technique for estimating the sizes of spherical nanoparticles (NPs) and through them, their concentrations. This paper demonstrates for the first time that C18 reversed-phase capillary liquid chromatography (Cap-LC) coupled to diode array detection (DAD) has the potential to estimate mean concentrations of silver nanoparticles (AgNPs) and thereby determine their average size. Direct injection of the sample without previous extraction or separation steps is carried out. Only a unique standard with a known AgNP size is needed for the calibration. In a first approach, the new method has been tested over silver nanoparticles, produced using different methods of synthesis, and their water dilutions. Good results were achieved: relative errors ranged up to 5% compared with TEM. Also stability and functionality-related NP properties, as well as nonspherical AgNPs, can be studied using this method. Moreover, by coupling online in-tube solid-phase microextraction (IT-SPME) to Cap-LC-DAD, the effect of the dilution can be studied as particles distribute by polarity in two groups, a distribution that responds to average particle size of not only AgNPs, but also gold nanoparticles (AuNPs). In such a distribution, the average particle size is correlated with the peak area ratio. Additionally, besides higher sensitivity and concentration-dependent signals, IT-SPME-Cap-LC responds to changes in the particle's hydrodynamic diameter allowing, for instance, the detection of cationic surfactants. Size-exclusion and hydrophobic effects are the mechanisms involved to explain this behavior.
RESUMEN
This paper describes a new method for the determination of polar triazines, including some degradation products, which combines online in-tube solid-phase microextraction (IT-SPME) and capillary liquid chromatography with UV-diode array detection (DAD). Different extractive coatings have been evaluated for IT-SPME, a capillary column with a polydimethylsiloxane (PDMS) coating, and the same coating modified with carboxylated single-wall carbon nanotubes (c-SWCNTs) and carboxylated multiwall carbon nanotubes (c-MWCNTs). On the basis of the results obtained, a new method is presented for the identification and determination of triazines in water samples. A careful selection of the eluent composition provides the required selectivity and sensitivity for the quantification of the target analytes, even those highly polar (log K ow ≤ 2.3). The proposed conditions have been successfully used for the quantitation of the analytes in the 0.25-50.0 µg L(-1) range. The limits of detection (LODs) are in the 0.02-0.1 µg L(-1) range, and the intraday and interday relative standard deviation (RSD) coefficients are ≤9 and ≤17 %, respectively. The reliability of the described method has been tested by analyzing several real water samples. The proposed method can be considered an environmentally friendly and cost-effective alternative for routine monitoring of triazines and their degradation products in waters.
Asunto(s)
Cromatografía Liquida/métodos , Microextracción en Fase Sólida/métodos , Triazinas/química , Triazinas/aislamiento & purificación , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Cromatografía Liquida/instrumentación , Límite de Detección , Microextracción en Fase Sólida/instrumentaciónRESUMEN
The potential of antioxidants in preventing several diseases has attracted great attention in recent years. Indeed, these products are part of a multi-billion industry. However, there is a lack of scientific information about safety, quality, doses, and changes over time. In the present work, a simple multisample methodology based on chemiluminiscent imaging to determine chlorogenic acid (CHLA) in green coffee samples has been proposed. The multi-chemiluminiscent response was obtained after a luminol-persulfate reaction at pH 10.8 in a multiplate followed by image capture with a charge-coupled device (CCD) camera as a readout system. The chemiluminiscent image was used as an analytical response by measuring the luminescent intensity at 0 °C with the CCD camera. Under the optimal conditions, the detection limit was 20 µM and precision was also adequate with RSD < 12%. The accuracy of the proposed system was evaluated by studying the matrix effect, using a standard addition method. Recoveries of chlorogenic acid ranged from 93-94%. The use of the CCD camera demonstrated advantages such as analysis by image inspection, portability, and easy-handling which is of particular relevance in the application for quality control in industries. Furthermore, multisample analysis was allowed by one single image saving time, energy, and cost. The proposed methodology is a promising sustainable analytical tool for quality control to ensure green coffee safety through dosage control and proper labelling preventing potential frauds.
RESUMEN
In the present work, a procedure based on a dispersive medium for carbon black (CB) isolation from soil samples for analysis was proposed for the first time. Polymeric and biological dispersants and a sequential use of both dispersants were assayed. Asymmetrical flow field flow fractionation with dynamic light scattering detector (AF4-DLS) and sedimentation field flow fractionation with multi-angle light scattering detector (SdF3-MALS) were used for CB quantitation and characterization in the achieved dispersions. Soil samples contaminated with CB were processed, and CB isolation depended on the solid size distribution and composition and dispersant nature. More quantitative isolations were achieved for the four soils treated by the biological dispersant. As the organic matter percentage is higher in soil, the CB isolation was better, varying between 75 and 99% with standard deviation (s) ⩽ 2% for all soils. A soil contaminated with a CB-based pigment paste was analyzed, achieving (99 ± 2)% expressed as expanded uncertainty (K = 2) of dispersive isolation by the biological dispersant, and the sampling was scaled to 250 g of soil with positive results. The procedure was completed by CB recovery to obtain a solid residue able to be reused if necessary. For the filter-aided recovery step, different membranes (fiberglass, nylon, and Teflon) with a pore size between 0.1 and 5 µm were tested. The quantitation of the CB retained in the filter was measured by diffuse reflectance spectroscopy. Teflon (0.10 µm) provided better results for CB recovery, and its re-dispersion was also studied with suitable results. Determination of CB from the filters by diffuse reflectance spectrometry provided the same results than AF4 for CB dispersions.
RESUMEN
An in place colorimetric method has been proposed for estimation of the quantity of lactose in several matrix (milk, water effluents and surfaces). Analyzing the amount of this carbohydrate it can be control the product, the cleanliness of the parts of the dairy companies and it can avoid contamination of milk products produced there. This method combines the use of HPTLC for sugars separation with novel analytical devices as minispectrophotometer with fiber optic coupled to a smartphone. In order to measure the lactose a colorimetric reaction has been used. Variable volumes of samples or stock solutions were deposited in nano-silica gel layer, a mobile phase of acetonitrile:water:acetic acid was used for carbohydrate separation and a solution of thymol (0.05 g Thymol in 95 mL of EtOH and 5 mL H2SO4) was used for revealed the carbohydrate spot. Finally, the reflectance of samples and stock solutions were measured. The achieved limits of detection were 0.03 mg mL-1 and 0.003 mg mL-1 for the working concentration range and the analysis at traces level respectively.
Asunto(s)
Lactosa , Teléfono Inteligente , Animales , Cromatografía Líquida de Alta Presión , Cromatografía en Capa Delgada , LecheRESUMEN
A new approach based on the use of polydimethylsiloxane (PDMS) membranes doped with Griess reagents for in situ determination of NO2- and NO3-- in real samples is proposed. The influence of some doping compounds, on the properties of the PDMS membranes, such as tetraethyl orthosilicate (TEOS), or/and ionic liquids (OMIM PF6) has been studied. Membrane characterization was performed. To apply the procedure to NO3- determination, dispersed Zn nanoparticles (ZnNPs) were employed. The analytical responses were the absorbance or the RGB components from digital images. Good precision (RSD < 8%) and detection limit of 0.01 and 0.5 mgL-1 for NO2- and NO3-, respectively, were achieved. The approach was satisfactory when applied to the determination of NO2- and NO3- in drinking waters, irrigation and river waters, and waters from canned and fresh vegetables. The results obtained were statistically comparable with those by using nitrate ISE or UV measurement. This approach was transferred satisfactory to 96 wells for multianalysis. This study enables the improvement in the on-site determination of NO2- and NO3- in several matrices. It is a sustainable alternative over the reagent derivatizations in solution and presents several advantages such as being versatile, simplicity, low analysis time, cost, and energy efficiency. The response can be detected visually or by portable instruments such as smartphone.
RESUMEN
With the explosive growth of the dietary supplements industry, new demands have emerged that cannot be faced with the sophisticated instrumentation available in well-equipped laboratories. In particular, there is a demand for simplified and easy-to-use instruments, capable of providing results in short times of analysis. In this study, a hand-portable miniaturized liquid chromatograph (portable LC) has been tested for the determination of chlorogenic acids (CGAs) in products intended to supplement the diet and elaborated with green coffee extracts. CGAs offer several health benefits due to their antioxidant properties, and an increasing number of dietary supplements are marketed with claimed high contents of these compounds. The results obtained with the proposed portable LC approach have been compared with those obtained with two other miniaturized benchtop liquid chromatography instruments, namely, a capillary liquid chromatograph (capLC) and a nano liquid chromatograph (nanoLC). Although compared with the methods that used the benchtop instruments, the sensitivity attainable was lower, the portable LC instrument provided a comparable analytical performance for the quantification of the main GCAs at low mg g-1 levels, and it was clearly superior in terms of speed. The proposed portable LC-based method can be applied to assess the content and distribution profile of the predominant CGAs in this kind of dietary supplement. It can be also used to estimate the antioxidant power due to CGAs, as well as their preservation state.
RESUMEN
Sustainable and green sensors based on polydimethyl siloxane (PDMS) or cellulose polymers, as a case of study of the use of portable instrumentation joined to a smartphone, have been tested. A smartphone camera was used to obtain images and was also coupled to a minispectrometer, without and with an optical fiber probe to register spectra. To study light influence on the analytical signal, light-emitting diode (LED), halogen light and daylight have been assayed. A corrective palette of 24 colors and a set with 45 colors from different color ranges were used as the validation set. The results indicated that halogen light was the best option to obtain the spectra. However, for digital image analysis, it was the LED light that gave a greater approximation of the RGB values of the real colors. Based on these results, the spectra and the RGB components of PDMS solid sensors doped with 1,2-naphtoquinone-4-sulfonate (NQS) for the determination of ammonium in water or urea in urine, PDMS doped with Griess reagent for developing the assay of nitrite in waters and cellulose sensors for the determination of hydrogen sulfide in the atmospheres have been obtained. The results achieved were good in terms of sensitivity and linearity and were comparable to those obtained using a laboratory benchtop instrument. Several rules for selecting the most suitable light source to obtain the spectra and/or images have been established and an image correction method has been introduced.
RESUMEN
Characterization of carbon black (CB) nanomaterials is required in industrial and research areas. Hence, in this study, asymmetrical flow field flow fractionation coupled to UV-vis and DLS detectors in series (AF4-UV-vis-DLS) was studied to evaluate the CB dispersion behavior in polymeric and biological dispersants, given the relevance of these media in practical applications. Under the experimental conditions, the results indicated that polymeric and biological dispersions showed size distributions with hydrodynamic diameters of 404 and 175 nm, respectively, for a particle core diameter of 40 nm. The polymeric dispersant provided lower stability as a function of time than that achieved by the biological dispersant. AF4 allowed separation of different core-sized CB (40, 69, and 72 nm) according to their hydrodynamic size using cross-flow rates of 0.5 mL·min-1 and 1 mL·min-1 for polymeric and biological dispersants, respectively. The dilution of the polymeric dispersion with different real water matrices produced a dramatic loss of dispersion stability, this effect being negligible in the case of biological dispersions.