N,S coordination in Ni single-atom catalyst promoting CO2RR towards HCOOH.

Carbon-based single atom catalysts (SACs) are attracting extensive attention in the CO2 reduction reaction (CO2RR) due to their maximal atomic utilization, easily regulated active center and high catalytic activity, in which the coordination environment plays a crucial role in the intrinsic catalytic activity. Taking NiN4 as an example, this study reveals that the introduction of different numbers of S atoms into N coordination (Ni-NxS4-x (x = 1-4)) results in outstanding structural stability and catalytic activity. Owing to the additional orbitals around -1.60 eV and abundant Ni dxz, dyz, dx2, and dz2 orbital occupation after S substitution, N,S coordination can effectively facilitate the protonation of adsorbed intermediates and thus accelerate the overall CO2RR. The CO2RR mechanisms for CO and HCOOH generation via two-electron pathways are systematically elucidated on NiN4, NiN3S1 and NiN2S2. NiN2S2 yields HCOOH as the most favorable product with a limiting potential of -0.24 V, surpassing NiN4 (-1.14 V) and NiN3S1 (-0.50 V), which indicates that the different S-atom substitution of NiN4 has considerable influence on the CO2RR performance. This work highlights NiN2S2 as a high-performance CO2RR catalyst to produce HCOOH, and demonstrates that N,S coordination is an effective strategy to regulate the performance of atomically dispersed electrocatalysts.

Two-dimensional MBene: a comparable catalyst to MXene for effective CO2RR towards C1 products.

Electrochemical CO2 reduction reaction (CO2RR) to high-value-added products is one of the most promising strategies for mitigating the greenhouse effect and energy shortage. Two-dimensional (2D) MXene materials are regarded as promising catalysts for electrocatalysis, and the boron-analogs of MXenes, 2D transition metal borides (MBenes), may exhibit superior CO2RR performance owing to their unique electronic properties. Herein, a novel 2D transition metal boride, MoB, is theoretically evaluated as a potential catalyst for the CO2RR by comparing it with traditional Mo2C. MoB shows metallic nature and exhibits excellent electrical conductivity. MoB can effectively activate CO2 with a larger interaction energy of -3.64 eV than that of Mo2C. Both density of states and charge difference density reveal a significant charge transfer from MoB to CO2. MoB shows higher catalytic selectivity due to its inhibited hydrogen evolution reaction and low reaction energy for the CO2RR. At potentials more negative than -0.62 V, the CO2RR on MoB becomes a high-throughput reaction process towards CH4. This work discovered that MoB exhibited comparable CO2RR performance to Mo2C and forecasted MBenes as promising catalysts for electrocatalysis.

Highly Specific Colorimetric Probe for Fluoride by Triggering the Intrinsic Catalytic Activity of a AgPt-Fe3O4 Hybrid Nanozyme Encapsulated in SiO2 Shells.

Current colorimetric probes for fluoride (F-) primarily rely on organic chromophores that often suffer from unsatisfactory selectivity, complex organic synthesis, and low aqueous compatibility. Herein, we proposed a highly specific colorimetric method for F- with 100% aqueous compatibility by triggering the intrinsic peroxidase-like activity of a AgPt-Fe3O4 nanozyme encapsulated in SiO2 shells. The excellent catalytic performance of the AgPt-Fe3O4 nanozyme serves as an ideal platform for sensitive colorimetric sensing. After being encapsulated in SiO2, the enzyme-like activity of AgPt-Fe3O4 is inhibited and only F- can exclusively etch the SiO2 shell to expose the active site of the nanozyme, thereby inducing color changes via oxidation of the chromogenic substrate. The limit of detection of the proposed method can reach as low as 13.73 µM in aqueous solution, which is lower than the maximum allowable concentration (79 µM) stipulated in the World Health Organization drinking water regulation. More importantly, this method is highly specific toward F- over other types of anions commonly found in environmental water, making it capable of analyzing sewage samples with very complex matrices. Finally, the nanoprobe is embedded into a test strip by electrostatic spinning to enable the rapid, visual, and on-site detection of F-.

Can N, S Cocoordination Promote Single Atom Catalyst Performance in CO2 RR? Fe-N2 S2 Porphyrin versus Fe-N4 Porphyrin.

Single atom catalysts (SACs) are promising electrocatalysts for CO2 reduction reaction (CO2 RR), in which the coordination environment plays a crucial role in intrinsic catalytic activity. Taking the regular Fe porphyrin (Fe-N4 porphyrin) as a probe, the study reveals that the introduction of opposable S atoms into N coordination (Fe-N2 S2 porphyrin) allows for an appropriate electronic structural optimization on active sites. Owing to the additional orbitals around the Fermi level and the abundant Fe dz2 orbital occupation after S substitution, N, S cocoordination can effectively tune SACs and thus facilitating protonation of intermediates during CO2 RR. CO2 RR mechanisms lead to possible C1 products via two-, six-, and eight-electron pathways are systematically elucidated on Fe-N4 porphyrin and Fe-N2 S2 porphyrin. Fe-N4 porphyrin yields the most favorable product of HCOOH with a limiting potential of -0.70 V. Fe-N2 S2 porphyrin exhibits low limiting potentials of -0.38 and -0.40 V for HCOOH and CH3 OH, respectively, surpassing those of most Cu-based catalysts and SACs. Hence, the N, S cocoordination might provide better catalytic environment than regular N coordination for SACs in CO2 RR. This work demonstrates Fe-N2 S2 porphyrin as a high-performance CO2 RR catalyst, and highlights N, S cocoordination regulation as an effective approach to fine tune high atomically dispersed electrocatalysts.

Theoretical Investigation of the Fusion Process of Mono-Cages to Tri-Cages with CH4/C2H6 Guest Molecules in sI Hydrates.

Owing to a stable and porous cage structure, natural gas hydrates can store abundant methane and serve as a potentially natural gas resource. However, the microscopic mechanism of how hydrate crystalline grows has not been fully explored, especially for the structure containing different guest molecules. Hence, we adopt density functional theory (DFT) to investigate the fusion process of structure I hydrates with CH4/C2H6 guest molecules from mono-cages to triple-cages. We find that the volume of guest molecules affects the stabilities of large (51262, L) and small (512, s) cages, which are prone to capture C2H6 and CH4, respectively. Mixed double cages (small cage and large cage) with the mixed guest molecules have the highest stability and fusion energy. The triangular triple cages exhibit superior stability because of the three shared faces, and the triangular mixed triple cages (large-small-large) structure with the mixed guest molecules shows the highest stability and fusion energy in the triple-cage fusion process. These results can provide theoretical insights into the growth mechanism of hydrates with other mono/mixed guest molecules for further development and application of these substances.

Ferredoxin-Inspired Design of S-Synergized Fe-Fe Dual-Metal Center Catalysts for Enhanced Electrocatalytic Oxygen Reduction Reaction.

Dual-metal center catalysts (DMCs) have shown the ability to enhance the oxygen reduction reaction (ORR) owing to their distinctive structural configurations. However, the precise modulation of electronic structure and the in-depth understanding of synergistic mechanisms between dual metal sites of DMCs at the atomic level remain challenging. Herein, mimicking the ferredoxin, Fe-based DMCs (Fe2N6-S) are strategically designed and fabricated, in which additional Fe and S sites are synchronously installed near the Fe sites and serve as "dual modulators" for coarse- and fine-tuning of the electronic modulation, respectively. The as-prepared Fe2N6-S catalyst exhibits enhanced ORR activity and outstanding Zinc-air (Zn-air) battery performance compared to the conventional single Fe site catalysts. The theoretical and experimental results reveal that introducing the second metal Fe creates a dual adsorption site that alters the O2 adsorption configuration and effectively activates the O─O bond, while the synergistic effect of dual Fe sites results in the downward shift of the d-band center, facilitating the release of OH*. Additionally, local electronic engineering of heteroatom S for Fe sites further facilitates the formation of the rate-determining step OOH*, thus accelerating the reaction kinetics.

In Situ Growth of Conductive Metal-Organic Framework onto Cu2O for Highly Selective and Humidity-Independent Hydrogen Sulfide Detection in Food Quality Assessment.

The sensitivity of chemiresistive gas sensors based on metal oxide semiconductors (MOSs) has been inherently affected by ambient humidity because their reactive oxygen species are easily hydroxylated by water molecules, which significantly reduces the accuracy of the gas sensors in food quality assessment. Although conventional metal organic frameworks (MOFs) can serve as coatings for MOSs for humidity-independent gas detection, they have to operate at high working temperatures due to their low or nonconductivity, resulting in high power consumption, significant manufacturing inconvenience, and short-term stability due to the oxidation of MOFs. Here, the conductive and thickness-controlled CuHHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene)-coated Cu2O are developed by combining in situ etching and layer-by-layer liquid-phase growth method, which achieves humidity-independent detection of H2S at room temperature. The response to H2S only decreases by 2.6% below 75% relative humidity (RH), showing a 9.6-fold improvement than the bare Cu2O sensor, which is ascribed to the fact that the CuHHTP layer hinders the adsorption of water molecules. Finally, a portable alarm system is developed to monitor food quality by tracking released H2S. Compared with gas chromatography method, their relative error is within 9.4%, indicating a great potential for food quality assessment.

Rational design of bimetal phosphide embedded in carbon nanofibers for boosting oxygen evolution.

The development of non-precious metal electrocatalysts for oxygen evolution reaction (OER) is crucial for generating large-scale hydrogen through water electrolysis. In this work, bimetal phosphides embedded in electrospun carbon nanofibers (P-FeNi/CNFs) were fabricated through a reliable electrospinning-carbonization-phosphidation strategy. The incorporation of P-FeNi nanoparticles within CNFs prevented them from forming aggregation and further improved their electron transfer property. The bimetal phosphides helped to weaken the adsorption of O intermediate, promoting the OER activity, which was confirmed by the theoretical results. The as-prepared optimized P-Fe1Ni2/CNFs catalyst exhibited very high OER electrocatalytic performance, which required very low overpotentials of just 239 and 303 mV to reach 10 and 1000 mA cm-2, respectively. It is superior to the commercial RuO2 and many other related OER electrocatalysts reported so far. In addition, the constructed alkaline electrolyzer based on the P-Fe1Ni2/CNFs catalyst and Pt/C delivered a cell voltage of 1.52 V at 10 mA cm-2, surpassing the commercial RuO2||Pt/C (1.61 V) electrolyzer. It also offered excellent alkaline OER performance in simulated seawater electrolyte. This demonstrated its potential for practical applications across a broad range of environmental conditions. Our work provides new ideas for the ration design of highly efficient non-precious metal-based OER catalysts for water electrolysis.

In-situ construction of iron-modified nickel nanoparticles assisted by hexamethylenetetramine with the internal and external collaboration for highly selective electrocatalytic carbon dioxide reduction.

Carbon dioxide (CO2) electroreduction provides a sustainable route for realizing carbon neutrality and energy supply. Up to now, challenges remain in employing abundant and inexpensive nickel materials as candidates for CO2 reduction due to their low activity and favorable hydrogen evolution. Here, the representative iron-modified nickel nanoparticles embedded in nitrogen-doped carbon (Ni1-Fe0.125-NC) with the porous botryoid morphology were successfully developed. Hexamethylenetetramine is used as nitrogen-doped carbon source. The collaboration of internal lattice expansion with electron effect and external confinement effect with size effect endows the significant enhancement in electrocatalytic CO2 reduction. The optimized Ni1-Fe0.125-NC exhibits broad potential ranges for continuous carbon monoxide (CO) production. A superb CO Faradaic efficiency (FECO) of 85.0 % realized at -1.1 V maintains a longtime durability over 35 h, which exceeds many state-of-the-art metal catalysts. Theoretical calculations further confirm that electron redistribution promotes the desorption of CO in the process for favorable CO production. This work opens a new avenue to design efficient nickel-based materials by considering the intrinsic structure and external confinement for CO2 reduction.

Heterojunction-Induced Rapid Transformation of Ni3+/Ni2+ Sites which Mediates Urea Oxidation for Energy-Efficient Hydrogen Production.

Water electrolysis is an environmentally-friendly strategy for hydrogen production but suffers from significant energy consumption. Substituting urea oxidation reaction (UOR) with lower theoretical voltage for water oxidation reaction adopting nickel-based electrocatalysts engenders reduced energy consumption for hydrogen production. The main obstacle remains strong interaction between accumulated Ni3+ and *COO in the conventional Ni3+-catalyzing pathway. Herein, a novel Ni3+/Ni2+ mediated pathway for UOR via constructing a heterojunction of nickel metaphosphate and nickel telluride (Ni2P4O12/NiTe), which efficiently lowers the energy barrier of UOR and avoids the accumulation of Ni3+ and excessive adsorption of *COO on the electrocatalysts, is developed. As a result, Ni2P4O12/NiTe demonstrates an exceptionally low potential of 1.313 V to achieve a current density of 10 mA cm-2 toward efficient urea oxidation reaction while simultaneously showcases an overpotential of merely 24 mV at 10 mA cm-2 for hydrogen evolution reaction. Constructing urea electrolysis electrolyzer using Ni2P4O12/NiTe at both sides attains 100 mA cm-2 at a low cell voltage of 1.475 V along with excellent stability over 500 h accompanied with nearly 100% Faradic efficiency.

Rational design of trimetallic AgPt-Fe3O4 nanozyme for catalyst poisoning-mediated CO colorimetric detection.

Carbon monoxide (CO) is not only a highly poisonous gas that brings great health risk, but also a significant signaling molecule in body. However, it is still challengeable for development of alternative colorimetric probes to traditional organic chromophores for simple, sensitive and convenient CO sensing. Here, for the first time, we rationally design a novel hydrophilic AgPt-Fe3O4 nanozyme with a unique heterodimeric nanostructure for colorimetric sensing of CO based on the excellent peroxidase-like catalytic activity as well as highly poisonous effect of CO on the nanozyme's catalytic activity. Both experimental evidence and theoretical calculations reveal the trimetallic AgPt-Fe3O4 nanozyme is susceptible to poisoning with the strongest affinity towards CO compared to individual Fe3O4 or Ag-Fe3O4, which is attributed to the adequate exposure of the active metallic sites and efficient interfacial synergy of unique heterodimeric nanostructure. Accordingly, a novel nanozyme-based colorimetric strategy is developed for CO detection with a low detection limit of 5.6 ppb in solution. Furthermore, the probe can be prepared as very convenient test strips and integrated with the portable smartphone platforms for detecting CO gas samples with a low detection limit of 8.9 ppm. Overall, our work proposes guidelines for the rational design of metallic heterogeneous nanostructure to expand the analytical application of nanozyme.

Precise electronic structure modulation on MXene-based single atom catalysts for high-performance electrocatalytic CO2 reduction reaction: A first-principle study.

Electrocatalytic CO2 reduction reaction (CO2RR) to CO is a logical approach to achieve a carbon-neutral cycle. In this work, a series of Ti2CO2 and O vacancy containing Ti2CO2 MXene-based transition metal (TM) single atom catalysts (SACs), including TM-Ti2CO2 and TM-Ov-Ti2CO2, are explored for high-performance CO2RR. Sc/Ti/V/Cr-Ti2CO2 and Ni-Ov-Ti2CO2 are screened out with limiting potential (UL) more positive than -0.50 V. Ni-Ov-Ti2CO2 is a candidate catalyst for CO2RR to CO, considering its activity with UL of -0.27 eV, and the selectivity relevant to hydrogen evolution reaction and HCOOH production. Meanwhile, a novel activity descriptor of TM-Ti-O group valence state is proposed according to that TMs work in synergy with coordinated Ti and O atoms and a level of around 0.64 e- benefits to CO2RR. This work highlights oxygen vacancy containing Ti2CO2-based Ni SAC as a promising catalyst for CO2RR, and provides a feasible electronic structure design principle for guiding the design of MXene-based SACs for CO2RR.

Constructing N,S and N,P Co-Coordination in Fe Single-Atom Catalyst for High-Performance Oxygen Redox Reaction.

Single-atom catalysts (SACs) are promising electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), in which the coordination environment plays a crucial role in activating the intrinsic activity of the central metal. Taking the FeN4 SAC as a probe, this work investigates the effect of introducing S or P atoms into N coordination (FeSx N4-x and FePx N4-x (x=1-4)) on the electronic structure optimization of Fe center and its catalytic performance. Attributing to the optimal Fe 3d orbitals, FePN3 can effectively activate O2 and promote ORR with a low overpotential of 0.29 V, surpassing FeN4 and most reported catalysts. FeSN3 is beneficial to H2 O activation and OER, proceeding with an overpotential of 0.68 V, which is superior to FeN4 . Both FePN3 and FeSN3 exhibit outstanding thermodynamic and electrochemical stability with negative formation energies and positive dissolution potentials. Hence, the N,P and N,S co-coordination might provide better catalytic environment than regular N coordination for SACs in ORR and OER. This work demonstrates FePN3 /FeSN3 as high-performance ORR/OER catalysts and highlights N,P and N,S co-coordination regulation as an effective approach to fine tune high atomically dispersed electrocatalysts.

Bioinspired trimesic acid anchored electrocatalysts with unique static and dynamic compatibility for enhanced water oxidation.

Layered double hydroxides are promising candidates for the electrocatalytic oxygen evolution reaction. Unfortunately, their catalytic kinetics and long-term stabilities are far from satisfactory compared to those of rare metals. Here, we investigate the durability of nickel-iron layered double hydroxides and show that ablation of the lamellar structure due to metal dissolution is the cause of the decreased stability. Inspired by the amino acid residues in photosystem II, we report a strategy using trimesic acid anchors to prepare the subsize nickel-iron layered double hydroxides with kinetics, activity and stability superior to those of commercial catalysts. Fundamental investigations through operando spectroscopy and theoretical calculations reveal that the superaerophobic surface facilitates prompt release of the generated O2 bubbles, and protects the structure of the catalyst. Coupling between the metals and coordinated carboxylates via C‒O‒Fe bonding prevents dissolution of the metal species, which stabilizes the electronic structure by static coordination. In addition, the uncoordinated carboxylates formed by dynamic evolution during oxygen evolution reaction serve as proton ferries to accelerate the oxygen evolution reaction kinetics. This work offers a promising way to achieve breakthroughs in oxygen evolution reaction stability and dynamic performance by introducing functional ligands with static and dynamic compatibilities.

Pd-Fe3O4 Janus nanozyme with rational design for ultrasensitive colorimetric detection of biothiols.

Although nanozyme-based colorimetric assays have been broadly used for biosensing, some limitations such as low catalytic activity of nanozyme, poor sensitivity to analytes and lack of understanding the structure-activity relationship remain unsolved. In this work, we developed an ultrasensitive colorimetric method for biothiols detection based on density functional theory-assisted design of janus Pd-Fe3O4 nanozyme. The Pd-Fe3O4 dumbbell-like nanoparticles (DBNPs) prepared by seed-mediated approach shows a uniform heterodimeric nanostructure. Ultrasensitive biothiols detection is achieved from two aspects. On one hand, due to the synergistic effect between Pd and Fe3O4 in the dumbbell structure, Pd-Fe3O4 DBNPs show enhanced peroxidase-mimic activity compared to the individual components. On the other hand, when the target biothiols molecule is present, its inhibition effect on the janus Pd-Fe3O4 nanozyme is also significantly enhanced. The above results are confirmed both in experiment and theoretical calculation. Based on the rational design, a simple, highly selective and urtrasensitive colorimetric and quantitative assay for biothiols is developed. The limit of detection (LOD) can reach as low as 3.1 nM in aqueous solution. This assay is also successfully applied to the detection of biothiols in real urine samples. Moreover, the Pd-Fe3O4 nanozyme is used to discriminate biothiols levels in normal and cancer cells with high sensitivity at the cell density of 15,000/mL, which demonstrates its great potential in biological and clinical analysis. This work not only shows the great promise of janus bimetallic nanozymes' excellent functionalities but also provides rational guidelines to design high-performance nanozymes for biosensing and biomedical applications.

A perylenediimide modified SiO2@TiO2 yolk-shell light-responsive nanozyme: Improved peroxidase-like activity for H2O2 and sarcosine sensing.

Although light-responsive nanozyme have been widely used in colorimetric sensing, some limitations such as poor catalytic activity, low detection efficiency, and unclear structure-activity relationships remain unresolved. Herein, we prepared an excellent light-responsive peroxidase (POD) mimic, perylenediimide (PDI-OH) modified SiO2 @TiO2 yolk-shell spheres (SiO2 @TiO2/PDI-OH), based on DFT-assisted design. The experiment and DFT calculation revealed that the enhanced POD-like activity was mainly attributed to a suitable built-in electric field among adjacent PDI-OH molecules on the surface of the SiO2 @TiO2 and the unique yolk-shell structure with more reaction sites of SiO2 @TiO2. Consequently, the highly selective and ultrasensitive detection of H2O2 is achieved with a detection limit (LOD) of 7.6 × 10-8M. Further, the selective detection of sarcosine with LOD of 1.2 × 10-7 M was also achieved by introducing sarcosine oxidase (SOx). This colorimetric assay is successfully applied to selectively detect H2O2 and sarcosine levels in real samples. Controlled response time, anti-interference, and the robustness of the developed colorimetric sensor are the key advantages. And the present work firstly clarifies the effect of PDIs substituents on the POD-like activity of light-responsive nanozymes and provided new guidelines to develop high-performance nanozymes for hazardous substances detection.

A "Pre-Constrained Metal Twins" Strategy to Prepare Efficient Dual-Metal-Atom Catalysts for Cooperative Oxygen Electrocatalysis.

Dual-metal-atom-center catalysts (DACs) are a novel frontier in oxygen electrocatalysis, boasting functional and electronic synergies between contiguous metal centers and higher catalytic activities than single-atom-center catalysts. However, the definition and catalytic mechanism of DACs configurations remain unclear. Here, a "pre-constrained metal twins" strategy is proposed to prepare contiguous FeN4 and CoN4 DACs with homogeneous conformations embedded in a N-doped graphitic carbon (FeCo-DACs/NC). A programmable phthalocyanines dimer is used as a structural moiety to anchor the bimetallic sites (containing Co and Fe) in a metal-organic framework (MOF) to achieve delocalized dispersion before pyrolysis. The resultant FeCo-DACs/NC exhibits excellent electrochemical performance in oxygen electrocatalysis and rechargeable Zn-air batteries. Theoretical calculations demonstrate that the synergetic interaction of adjacent metals optimizes the d-band center position of metal centers and balances the free energy of the *O intermediate, thereby improving the oxygen electrocatalytic activity. This work opens up an avenue for the rational design of DACs with tailored electronic structures and uniform geometric configurations.

Two birds with one stone: large catalytic areas and abundant nitrogen sites inspired by fluorine doping contributing to CO2RR activity and selectivity.

Electroreduction of CO2 based on metal-free carbon catalysts is an attractive approach for useful products. However, it remains a great chemical challenge due to its unsatisfactory activity and poor selectivity. Here, we report a successful case to greatly improve CO2-to-CO conversion on carbon black (CB) and nitrogen-doped carbon black (N-CB). By introducing fluorine, the faradaic efficiency of CO was increased from 12.8% (CB) and 50.8% (N-CB) to 93.1% (nitrogen and fluorine co-doped carbon black, N,F-CB) at -0.7 V. A partial current density of 4.19 mA cm-2 remained durable for about 23 h. The superiority of N,F-CB can be attributed to its large catalytic areas and abundant N active sites inspired by fluorine doping. Specifically, the fluorine precursor of polyvinylidene fluoride (PVDF) firstly performs as a nitrogen fixator, protecting the catalyst from more nitrogen escaping during the carbonization treatment. The number of nitrogen sites is about 4.4 times higher than it is for the N-CB. Meanwhile, PVDF as the area extender significantly improves the catalytic area; the specific surface area and the ECSA of N,F-CB are 8.7 and 6.9 times higher than that of CB. This work provides an insight into how heteroatoms can manipulate catalytic activity and selectivity through the catalytic area of carbon materials with more active sites.

MOF-Transformed In2O3-x@C Nanocorn Electrocatalyst for Efficient CO2 Reduction to HCOOH.

For electrochemical CO2 reduction to HCOOH, an ongoing challenge is to design energy efficient electrocatalysts that can deliver a high HCOOH current density (JHCOOH) at a low overpotential. Indium oxide is good HCOOH production catalyst but with low conductivity. In this work, we report a unique corn design of In2O3-x@C nanocatalyst, wherein In2O3-x nanocube as the fine grains dispersed uniformly on the carbon nanorod cob, resulting in the enhanced conductivity. Excellent performance is achieved with 84% Faradaic efficiency (FE) and 11 mA cm-2 JHCOOH at a low potential of - 0.4 V versus RHE. At the current density of 100 mA cm-2, the applied potential remained stable for more than 120 h with the FE above 90%. Density functional theory calculations reveal that the abundant oxygen vacancy in In2O3-x has exposed more In3+ sites with activated electroactivity, which facilitates the formation of HCOO* intermediate. Operando X-ray absorption spectroscopy also confirms In3+ as the active site and the key intermediate of HCOO* during the process of CO2 reduction to HCOOH.

Sandwiched Cathodes Assembled from CoS2 -Modified Carbon Clothes for High-Performance Lithium-Sulfur Batteries.

Structural design of advanced cathodes is a promising strategy to suppress the shuttle effect for lithium-sulfur batteries (LSBs). In this work, the carbon cloth covered with CoS2 nanoparticles (CC-CoS2 ) is prepared to function as both three-dimensional (3D) current collector and physicochemical barrier to retard migration of soluble lithium polysulfides. On the one hand, the CC-CoS2 film works as a robust 3D current collector and host with high conductivity, high sulfur loading, and high capability of capturing polysulfides. On the other hand, the 3D porous CC-CoS2 film serves as a multifunctional interlayer that exhibits efficient physical blocking, strong chemisorption, and fast catalytic redox reaction kinetics toward soluble polysulfides. Consequently, the Al@S/AB@CC-CoS2 cell with a sulfur loading of 1.2 mg cm-2 exhibits a high rate capability (≈823 mAh g-1 at 4 C) and delivers excellent capacity retention (a decay of ≈0.021% per cycle for 1000 cycles at 4 C). Moreover, the sandwiched cathode of CC-CoS2 @S/AB@CC-CoS2 is designed for high sulfur loading LSBs. The CC-CoS2 @S/AB@CC-CoS2 cells with sulfur loadings of 4.2 and 6.1 mg cm-2 deliver high reversible capacities of 1106 and 885 mAh g-1 , respectively, after 100 cycles at 0.2 C. The outstanding electrochemical performance is attributed to the sandwiched structure with active catalytic component.