Co-treatment of landfill leachate in laboratory-scale sequencing batch reactors: analysis of system performance and biomass activity by means of respirometric techniques.

Aged or mature leachate, produced by old landfills, can be very refractory; for this reason mature leachate is difficult to treat alone, but it can be co-treated with sewage or domestic wastewater. The aim of the study was to investigate the feasibility of leachate co-treatment with synthetic wastewater, in terms of process performance and biomass activity, by means of respirometric techniques. Two sequencing batch reactors (SBRs), named SBR1 and SBR2, were fed with synthetic wastewater and two different percentages of landfill leachate (respectively 10% and 50% v v(-1) in SBR1 and SBR2). The results showed good chemical oxygen demand (COD) removal efficiency for both reactors, with average COD removals equal to 91.64 and 89.04% respectively for SBR1 and SBR2. Furthermore, both SBRs showed good ammonia-nitrogen (AN) removal efficiencies, higher than 60%, thus confirming the feasibility of leachate co-treatment with a readily biodegradable wastewater. Significant respiration rates were obtained for the heterotrophic population (average values of maximum oxygen uptake rate equal to 37.30 and 56.68 mg O2 L(-1) h(-1) respectively for SBR1 and SBR2), thus suggesting the feasibility of leachate co-treatment with synthetic wastewater.

Hydrocarbons removal from real marine sediments: Analysis of degradation pathways and microbial community development during bioslurry treatment.

In this study, real marine sediments polluted by petroleum compounds were treated by means of a bioslurry pilot scale reactor. The treatment performance was evaluated by measuring the removal of total petroleum hydrocarbon (TPH), coupled to further analyses required to understand the mechanisms involved in the biodegradation process. The maximum TPH-removal efficiency reached 86 % at the end of experiments. Moreover, high throughput 16S RNA gene sequencing was used to describe the microbiome composition in sediment prior to, and after, bioslurry treatment, in order to identify the taxa mostly entailed in the TPH removal process. The raw sediment was mostly colonized by members of Sulfurimonas genus; after bioslurry treatment, it was noticed a shift in the microbial community composition, with Proteobacteria phylum dominating the remediation environment (high increase in terms of growth for Hydrogenophaga and Sphingorhabdus genera) along with the Phaeodactylibacter genus (Bacteroidetes). Furthermore, the assessment of gaseous emissions from the system allowed to quantify the volatile hydrocarbon component and, consequently, to obtain a more accurate evaluation of TPH-removal pathway by the bioslurry system. Finally, phytotoxicity tests on sediment samples highlighted an increase of the treated sample quality status compared to the untreated one.

Pilot scale experiment with MBR operated in intermittent aeration condition: analysis of biological performance.

The effect of intermittent aeration (IA) on a MBR system was investigated. The study was aimed at analyzing different working conditions and the influence of different IA cycles on the biological performance of the MBR pilot plant, in terms of organic carbon and ammonium removal as well as extracellular polymeric substances (EPSs) production. The membrane modules were placed in a separate compartment, continuously aerated. This configuration allowed to disconnect from the filtration stage the biological phenomena occurring into the IA bioreactor. The observed results highlighted good efficiencies, in terms of organic carbon and ammonium removal. It was noticed a significant soluble microbial products (SMPs) release, likely related to the higher metabolic stress that anoxic conditions exerted on the biomass. However, the proposed configuration, with the membranes in a separate compartment, allowed to reduce the EPSs in the membrane tank even during the non-aerated phase, thus lowering fouling development.