Antimicrobial Lemongrass Essential Oil-Copper Ferrite Cellulose Acetate Nanocapsules.

Cellulose acetate (CA) nanoparticles were combined with two antimicrobial agents, namely lemongrass (LG) essential oil and Cu-ferrite nanoparticles. The preparation method of CA nanocapsules (NCs), with the two antimicrobial agents, was based on the nanoprecipitation method using the solvent/anti-solvent technique. Several physical and chemical analyses were performed to characterize the resulting NCs and to study their formation mechanism. The size of the combined antimicrobial NCs was found to be ca. 220 nm. The presence of Cu-ferrites enhanced the attachment of LG essential oil into the CA matrix. The magnetic properties of the combined construct were weak, due to the shielding of Cu-ferrites from the polymeric matrix, making them available for drug delivery applications where spontaneous magnetization effects should be avoided. The antimicrobial properties of the NCs were significantly enhanced with respect to CA/LG only. This work opens novel routes for the development of organic/inorganic nanoparticles with exceptional antimicrobial activities.

Maltodextrin-amino acids electrospun scaffolds cross-linked with Maillard-type reaction for skin tissue engineering.

The goal of this work is the design and the development of scaffolds based on maltodextrin (MD) to recover chronic lesions. MD was mixed with arginine/lysine/polylysine and the electrospinning was successfully used to prepare scaffolds with uniform and continuous nanofibers having regular shape and smooth surface. A thermal treatment was applied to obtain insoluble scaffolds in aqueous environment, taking the advantage of amino acids-polysaccharide conjugates formed via Maillard-type reaction. The morphological analysis showed that the scaffolds had nanofibrous structures, and that the cross-linking by heating did not significantly change the nanofibers' dimensions and did not alter the system stability. Moreover, the heating process caused a reduction of free amino group and proportionally increased scaffold cross-linking degree. The scaffolds were elastic and resistant to break, and possessed negative zeta potential in physiological fluids. These were characterized by direct antioxidant properties and Fe2+ chelation capability (indirect antioxidant properties). Moreover, the scaffolds were cytocompatible towards fibroblasts and monocytes-derived macrophages, and did not show any significant pro-inflammatory activity. Finally, those proved to accelerate the recovery of the burn/excisional wounds. Considering all the features, MD-poly/amino acids scaffolds could be considered as promising medical devices for the treatment of chronic wounds.

Photocatalytic Activity of Cellulose Acetate Nanoceria/Pt Hybrid Mats Driven by Visible Light Irradiation.

A photocatalytic system for the degradation of aqueous organic pollutants under visible light irradiation is obtained by an innovative approach based on ceria/platinum (Pt) hybrid nanoclusters on cellulose acetate fibrous membranes. The catalytic materials are fabricated by supersonic beam deposition of Pt nanoclusters directly on the surface of electrospun cellulose acetate fibrous mats, pre-loaded with a cerium salt precursor that is transformed into ceria nanoparticles directly in the solid mats by a simple thermal treatment. The presence of Pt enhances the oxygen vacancies on the surface of the formed ceria nanoparticles and reduces their band gap, resulting in a significant improvement of the photocatalytic performance of the composite mats under visible light irradiation. Upon the appropriate pretreatment and visible light irradiation, we prove that the most efficient mats, with both ceria nanoparticles and Pt nanoclusters, present a degradation efficiency of methylene blue of 70% and a photodegradation rate improved by about five times compared to the ceria loaded samples, without Pt. The present results bring a significant improvement of the photocatalytic performance of polymeric nanocomposite fibrous systems under visible light irradiation, for efficient wastewater treatment applications.

Development of biodegradable zein-based bilayer coatings for drug-eluting stents.

Drug-eluting stents (DES) have been widely used for the treatment of cardiovascular diseases. Nevertheless, chronic inflammation and delayed re-endothelialization still represent challenges for their clinical use. In the present work, we developed novel bilayer coatings for stent applications that could overcome these limitations, exclusively using biodegradable plant-based drugs and polymers. In particular, stainless steel surfaces were coated with rutin-loaded zein (the active layer) and cross-linked alginate (the sacrificial layer) via facile dip and spray coating methods. Various mechanical tests and analysis tools, such as infrared spectroscopy, water contact angle measurements, and scanning electron microscopy were used to characterize the coated surfaces. Degradation and release studies of the films were extensively carried out and compared. The release rate of rutin from the bilayer coating reached 66.1 ± 3.2% within 24 hours of incubation (initial burst period), while the rest of the drug was released over 21 days in a sustained manner. Antioxidant assays confirmed that rutin retained its free radical scavenging ability after being eluted in phosphate buffer at 37 °C. In vitro results with human fibroblasts and endothelial cells suggested that the coating materials and their degradation products are highly biocompatible. In conclusion, our novel drug-eluting coatings, fabricated with natural biodegradable polymers, are promising materials for DES applications, allowing a sustained drug delivery and improving the biocompatibility of cardiovascular implanted devices.

Very large spot size effect in nanosecond laser drilling efficiency of silicon.

The effect of the spot diameter in nanosecond excimer laser percussion drilling of through via in silicon wafer is presented. Experimental results show a ten fold increase of the ablation efficiency when decreasing the spot diameter from 220 µm to 9 µm at constant fluence in the range 7.5 J/cm(2) to 13.2 J/cm(2). Such effect is absent when using 60 ps deep-UV laser pulses. A model is developed that explain the findings in terms of plume shielding effect on the laser pulse. The model is successfully applied also on previously published data on deep-UV laser drilling of Polyamide and Alumina.

Bioresin-based superhydrophobic coatings with reduced bacterial adhesion.

HYPOTHESIS: Certain biobased polymers or natural compounds can be effectively used in superhydrophobic coating formulations to reduce environmental impact of fluorinated compounds and related bioaccumulation and toxicity problems. Many environmental concerns have thus far been raised in relation to toxicity of solvents and C8 fluorine chemicals. Elimination of these important elements from non-wettable coating formulations can jeopardize non-wetting performance significantly. However, intelligent and innovative approaches that introduce ecofriendly resins and compounds in superhydrophobic coating formulations without significantly altering self-cleaning superhydrophobicity are possible and being reported. EXPERIMENTS: Superhydrophobic coatings based on a biomass-derived bioresin polyfurfuryl alcohol (PFA) were prepared. The coatings were made by blending PFA resin with a C6 perfluorinated acrylic copolymer PFAC in solution and subsequent spray coating. Silica nanoparticles were also added in order to repel some common oils. Coating morphology, chemical and thermal properties, biocompatibility and bacterial adhesion properties were studied in detail. FINDINGS: Coatings having 50 wt% bioresin revealed equal water-repellency performance comapred to 100% PFAC-based coatings. Healthy cell growth was maintained on the coatings with no cell toxicity using human cell line, HeLa cells. Superhydrophobic coatings demonstrated very low bacterial adhesion to E. coli, S. aureus and Ps. aeruginosa indicating promising biofouling resistance. The coatings did not require any post thermal annealing. This would cause significant energy savings for large-scale adaptation.

Cellulose acetate - essential oil nanocapsules with antimicrobial activity for biomedical applications.

This study aimed to obtain bioactive nanosystems by combining cellulose acetate with three selected essential oils (EOs) to create spherical nanocapsules (NCs) using the solvent/anti-solvent technique. The biological activity of the obtained NCs was promoted by the use of some antimicrobial EOs: Peppermint, Cinnamon and lemongrass which were grafted on the cellulose acetate molecules. Due to their chemistry, such as long hydrocarbon tails and heads with functional groups these EOs were playing also the role of surfactant-like substance facilitating the formation of NCs. A dispersion of NCs was obtained in water and various spectroscopy techniques used to examine their size, morphology and chemistry. Dynamic light scattering calculate the size of the NCs whereas scanning electron microscopy showed their morphology. Fluorescent microscopy and Raman spectroscopy proved the attachment of the EOs in the cellulose acetate molecules. The antimicrobial activity of the obtained nanomaterials was tested against four microbial strains (bacteria: Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and a yeast strain of Candida albicans). The obtained results demonstrated that such NCs can be used in a variety of applications including medical, pharmaceutical recipients and in household products for treating or preventing microbial colonization and biofilm development.

Electrospun Fiber Pads of Cellulose Acetate and Essential Oils with Antimicrobial Activity.

The method of electrospinning was used to create nanofibers made of cellulose acetate (CA) and essential oils (EOs). CA polymer at 15% w/v was dissolved in acetone and then 1% or 5% v/v of EOs was added to the polymer solution. The utilized essential oils were rosemary and oregano oils. Then, the CA/EOs in acetone solution were electrospun, creating micro/nanofibers, approximately 700-1500 nm in diameter. Raman spectroscopy was used to detect the attachment of the EOs in the CA electrospun fibers (ESFs). Scanning electron microscopy was used to study the morphology, topography and dimensions of the ESFs. The formed CA/EOs ESFs are found to have good antimicrobial properties against three common microbial species, frequently found in difficult to treat infections: Bacteria species Staphylococcus aureus, Escherichia coli and the yeast Candida albicans. ESFs with 5% v/v oregano oil with respect to the initial solution, showed the best antimicrobial and anti-biofilm effects due to the potency of this EO against bacteria and fungi, especially for Escherichia coli and Candida albicans. This work describes an effective and simple method to prepare CA/EOs ESFs and opens up many new applications of micro/nanofibers such as improved antimicrobial wound dressings, anti-biofilm surfaces, sensors and packaging alternatives.

Polylactic Acid-Lemongrass Essential Oil Nanocapsules with Antimicrobial Properties.

Polylactic acid was combined with lemongrass essential oil (EO) to produce functional nanocapsules (NCs). The obtained polylactic acid nanoparticles showed antimicrobial activity both with and without the presence of lemongrass oil; however, the presence of EO improved the activity of the NCs. The presence of lemongrass assisted the formation of well-separated NCs and also provided enhanced antimicrobial properties, since lemongrass is known for its antimicrobial character. Fluorescence microscopy was used to optically observe the nanoparticles and NCs and revealed the attachment of lemongrass oil with the polylactic acid NCs. Dynamic light scattering was used to determine their size. UV absorption was used to determine the exact amount of lemongrass oil found in the polylactic acid-lemongrass oil NCs, which was important for understanding the minimum inhibitory concentration for the antimicrobial experiments. A series of clinically important microbial species were used in the study and the obtained NCs proved to have very good antimicrobial properties against all tested strains. Such NCs can be used for the design of ecological strategies, based on natural alternatives, which may be efficient against severe infections, including those that involve resistant pathogens and biofilms or those with difficult to reach localization.

All natural cellulose acetate-Lemongrass essential oil antimicrobial nanocapsules.

Nanocapsules and nanoparticles play an essential role in the delivery of pharmaceutical agents in modern era, since they can be delivered in specific tissues and cells. Natural polymers, such as cellulose acetate, are becoming very important due to their availability, biocompatibility, absence of toxicity and biodegradability. In parallel, essential oils are having continuous growth in biomedical applications due to the inherent active compounds that they contain. A characteristic example is lemongrass oil that has exceptional antimicrobial properties. In this work, nanocapsules of cellulose acetate with lemongrass oil were developed with the solvent/anti-solvent method with resulting diameter tailored between 95 and 185nm. Various physico-chemical and surface analysis techniques were employed to investigate the formation of the nanocapsules. These all-natural nanocapsules found to well bioadhere to mucous membranes and to have very good antimicrobial properties at little concentrations against Escherichia coli and Staphylococcus aureus.

Investigation of the electro-spinnability of alginate solutions containing gold precursor HAuCl4.

Alginate nanofibers with an average diameter of 75nm have been prepared by the electrospinning process. In addition, the spinnability of the solutions in the presence of the gold precursor HAuCl4 was investigated. At low concentrations of HAuCl4 well-formed nanofibers were produced, whereas as its concentration increases the nanofibrous mats present an increased number of bead-like defects. Herein, the in situ preparation of gold nanoparticles (Au NPs) is discussed since sodium alginate (SA) acts as the reducing agent and a mechanism is proposed in order to explain the bead-effect as well as the surface morphology of the alginate fibers decorated with Au NPs.