ß-Cyclodextrin-bearing gold glyconanoparticles for the development of site specific drug delivery systems.

Three novel gold nanoparticles containing multiple long, flexible linkers decorated with lactose, ß-cyclodextrin, and both simultaneously have been prepared. The interaction of such nanoparticles with ß-d-galactose-recognizing lectins peanut agglutinin (PNA) and human galectin-3 (Gal-3) was demonstrated by UV-vis studies. Gal-3 is well-known to be overexpressed in several human tumors and can act as a biorecognizable target. This technique also allowed us to estimate their loading capability toward the anticancer drug methotrexate (MTX). Both results make these glyconanoparticles potential site-specific delivery systems for anticancer drugs.

Synthesis of substituted pyrenes by indirect methods.

The pyrene nucleus is a valuable component for materials, supramolecular and biological chemistry, due to its photophysical/electronic properties and extended rigid structure. However, its exploitation is hindered by the limited range of methods and outcomes for the direct substitution of pyrene itself. In response to this problem, a variety of indirect methods have been developed for preparing pyrenes with less usual substitution patterns. Herein we review these approaches, covering methods which involve reduced pyrenes, transannular ring closures and cyclisations of biphenyl intermediates. We also showcase the diverse range of substituted pyrenes which have been reported in the literature, and can serve as building blocks for new molecular architectures.

Development of nanoparticles based on amphiphilic cyclodextrins for the delivery of active substances.

Although amphiphilic cyclodextrin derivatives (ACDs) serve as valuable building blocks for nanomedicine formulations, their widespread production still encounters various challenges, limiting large-scale manufacturing. This work focuses on a robust alternative pathway using mineral base catalysis to transesterify ß-cyclodextrin with long-chain vinyl esters, yielding ACD with modular and controlled hydrocarbon chain grafting. ACDs with a wide range of degrees of substitution (DS) were reliably synthesized, as indicated by extensive physicochemical characterization, including MALDI-TOF mass spectrometry. The influence of various factors, including the type of catalyst and the length of the hydrocarbon moiety of the vinyl ester, was studied in detail. ACDs were assessed for their ability to form colloidal suspensions by nanoprecipitation, with or without PEGylated phospholipid. Small-angle X-ray scattering and cryo-electron microscopy revealed the formation of nanoparticles with distinct ultrastructures depending on the DS: an onion-like structure for low and very high DS, and reversed hexagonal organization for DS between 4.5 and 6.1. We confirmed the furtivity of the PEGylated versions of the nanoparticles through complement activation experiments and that they were well tolerated in-vivo on a zebrafish larvae model after intravenous injection. Furthermore, a biodistribution experiment showed that the nanoparticles left the bloodstream within 10 h after injection and were phagocytosed by macrophages.

Poly(amido amine)-based mannose-glycodendrimers as multielectron redox probes for improving lectin sensing.

An easy-to-prepare series of electroactive poly(amido amine) (PAMAM)-based dendrimers of generations G0 to G2 having mannopyranosylferrocenyl moieties in the periphery to detect carbohydrate-protein interactions is reported. The synthesis involved the functionalization of the PAMAM surface with azidomethylferrocenyl groups and subsequent coupling of mannoside units by the Cu(I)-catalyzed Huisgen reaction. The binding affinity of the series of electroactive glycodendrimers was studied by isothermal titration calorimetry (ITC) and differential pulse voltammetry (DPV). Upon complexation of the glycodendrimers conjugates with prototypical concanavalin A (Con A), voltammograms showed a decrease of the peak current. Such dendrimers showed a notable improvement of redox sensing abilities toward Con A when compared with mono- and divalent analogues, based on both the glycoside multivalent and ferrocene dendritic effects.

Nanoscale metal-organic frameworks for the delivery of nucleic acids to cancer cells.

Therapeutic nucleic acids (TNAs) are gaining increasing interest in the treatment of severe diseases including viral infections, inherited disorders, and cancers. However, the efficacy of intracellularly functioning TNAs is also reliant upon their delivery into the cellular environment, as unmodified nucleic acids are unable to cross the cell membrane mainly due to charge repulsion. Here we show that TNAs can be effectively delivered into the cellular environment using engineered nanoscale metal-organic frameworks (nanoMOFs), with the additional ability to tailor which cells receive the therapeutic cargo determined by the functional moieties grafted onto the nanoMOF's surface. This study paves the way to integrate the highly ordered programmable nucleic acids into larger-scale functionalized nanoassemblies.

Identifying and characterizing binding sites on the irreversible inhibition of human glutathione S-transferase P1-1 by S-thiocarbamoylation.

Human glutathione S-transferase P1-1 (hGST P1-1) is involved in cell detoxification processes through the conjugation of its natural substrate, reduced glutathione (GSH), with xenobiotics. GSTs are known to be overexpressed in tumors, and naturally occurring isothiocyanates, such as benzyl isothiocyanate (BITC), are effective cancer chemopreventive compounds. To identify and characterize the potential inhibitory mechanisms of GST P1-1 induced by isothiocyanate conjugates, we studied the binding of GST P1-1 and some cysteine mutants to the BITC-SG conjugate as well as to the synthetic S-(N-benzylcarbamoylmethyl)glutathione conjugate (BC-SG). We report here the inactivation of GST P1-1 through the covalent modification of two Cys47 residues per dimer and one Cys101. The evidence has been compiled by isothermal titration calorimetry (ITC) and electrospray ionization mass spectrometry (ESI-MS). ITC experiments suggest that the BITC-SG conjugate generates adducts with Cys47 and Cys101 at physiological temperatures through a corresponding kinetic process, in which the BITC moiety is covalently bound to these enzyme cysteines through an S-thiocarbamoylation reaction. ESI-MS analysis of the BITC-SG incubated enzymes indicates that although the Cys47 in each subunit is covalently attached to the BITC ligand moiety, only one of the Cys101 residues in the dimer is so attached. A plausible mechanism is given for the emergence of inactivation through the kinetic processes with both cysteines. Likewise, our molecular docking simulations suggest that steric hindrance is the reason why only one Cys101 per dimer is covalently modified by BITC-SG. No covalent inactivation of GST P1-1 with the BC-SG inhibitor has been observed. The affinities and inhibitory potencies for both conjugates are high and very similar, but slightly lower for BC-SG. Thus, we conclude that the presence of the sulfur atom from the isothiocyanate moiety in BITC-SG is crucial for its irreversible inhibition of GST P1-1.

Porous Metal-Organic Framework Nanoparticles.

Metal-organic frameworks (MOFs) are hybrid crystalline particles composed of metal cations and organic linkers [...].

Diuretic drug binding to human glutathione transferase P1-1: potential role of Cys-101 revealed in the double mutant C47S/Y108V.

The diuretic drug ethacrynic acid (EA), both an inhibitor and substrate of pi class glutathione S-transferase (GST P1-1), has been tested in clinical trials as an adjuvant in chemotherapy. We recently studied the role of the active site residue Tyr-108 in binding EA to the enzyme and found that the analysis was complicated by covalent binding of this drug to the highly reactive Cys-47. Previous attempts to eliminate this binding by chemical modification yielded ambiguous results and therefore we decided here to produce a double mutant C47S/Y108V by site directed mutagenesis and further expression in Escherichia coli and the interaction of EA and its GSH conjugate (EASG) examined by calorimetric studies and X-ray diffraction. Surprisingly, in the absence of Cys-47, Cys-101 (located at the dimer interface) becomes a target for modification by EA, albeit at a lower conjugation rate than Cys-47. The Cys-47 → Ser mutation in the double mutant enzyme induces a positive cooperativity between the two subunits when ligands with affinity to G-site bind to enzyme. However, this mutation does not seem to affect the thermodynamic properties of ligand binding to the electrophilic binding site (H-site) and the thermal or chemical stability of this double mutant does not significantly affect the unfolding mechanism in either the absence or presence of ligand. Crystal structures of apo and an EASG complex are essentially identical with a few exceptions in the H-site and in the water network at the dimer interface.

ß-Cyclodextrin dimers linked through their secondary faces with rigid spacer arms as hosts for bile salts.

A convenient synthesis of ß-cyclodextrin dimers in which the two cyclodextrin units are linked by rigid tethers of relatively short length through their secondary sides is reported. Compounds hexa-2,4-diynediyl- and 1,4-phenylenediethyne-briged ß-cyclodextrin dimers are obtained in good yields from mono-2-O-propargyl-ß-cyclodextrin through Pd-mediated oxidative homo- and heterocoupling reactions. Isothermal titration calorimetry and NMR spectroscopy (PGSE and 2D-ROESY) are used to determine the thermodynamic parameters (K, ΔH, and TΔS°) for the complexation of such ß-cyclodextrin dimers with sodium cholate, deoxycholate, and chenodeoxycholate as well as to estimate the size of the supramolecular structures. The binding of bile salts is enhanced relative to that of native ß-cyclodextrin. Although chenodeoxycholate salt binds in a 1:1 fashion, cholate and deoxycholate salts bind in a 1:2 sequential mode.

Porous nanoparticles with engineered shells release their drug cargo in cancer cells.

Highly porous nanoscale metal-organic frameworks (nanoMOFs) attract growing interest as drug nanocarriers. However, engineering "stealth" nanoMOFs with poly(ethylene glycol) (PEG) coatings remains a main challenge. Here we address the goal of coating nanoMOFs with biodegradable shells using novel cyclodextrin (CD)-based oligomers with a bulky structure to avoid their penetration inside the open nanoMOF porosity. The PEG chains were grafted by click chemistry onto the CDs which were further crosslinked by citric acid. Advantageously, the oligomers' free citrate units allowed their spontaneous anchoring onto the nanoMOFs by complexation with the iron sites in the top layers. Up to 31 wt% oligomers could be firmly attached by simple incubation with the nanoMOFs in an aqueous medium. Moreover, the anticancer drug doxorubicin (DOX) was successfully entrapped in the core-shell nanoMOFs with loadings up to 41 wt%. High resolution STEM (HR-STEM) showed that the organized crystalline structures were preserved. Remarkably, at the highest loadings, DOX was poorly released out of the nanoMOFs at pH 7.4 (<2% in 2 days). In contrast, around 80% of DOX was released out at pH 4.5 of artificial lysosomal fluid in 24 h. Confocal microscopy investigations showed that the DOX-loaded nanoMOFs penetrated inside Hela cancer cell together with their PEG shells. There, they released the DOX cargo which further diffused inside the nucleus to eradicate the cancer cells.

Self-assembled multifunctional core-shell highly porous metal-organic framework nanoparticles.

Core-shell nanoparticles (NPs) are attracting increasing interest in nanomedicine as they exhibit unique properties arising from the combined assets of core and shell materials. Porous nanoscale metal-organic frameworks (nanoMOFs) are able to incorporate with high payloads a large variety of drugs. Like other types of NPs, nanoMOFs need to be functionalized with engineered coatings to ensure colloidal stability, control in vivo fate and drug release. To do so, a novel biodegradable cyclodextrin (CD)-based shell was designed in this study. Water soluble γ-CD-citrate oligomers grafted or not with fluorophores were successfully synthesized using citric acid as crosslinker and efficiently anchored onto the surface of porous nanoMOFs. As compared to monomeric CDs, the oligomeric CD coatings could offer higher interaction possibilities with the cores and better possibilities to graft functional moieties such as fluorescent molecules. The amounts of γ-CD-citrate oligomers onto the nanoMOFs were as high as 53 ± 8 wt%. The yield reached up to 86% in the optimized system. These core-shell nanocomposites were stable upon storage, in contrast to the naked nanoMOFs. In addition, the presence of the coating prevented the doxorubicin (DOX)-loaded nanoMOFs from aggregation. Moreover, due to the presence of fluorophores conjugated to the shell, fluorescence-lifetime microscopy enabled deciphering the coating mechanism. DOX loadings reached 48 ± 10 wt% after 24 h incubation with the drug solution. After coating for additional 24 h, DOX loadings reached 65 ± 8 wt%.

Kinetic and thermodynamic characterization of dUTP hydrolysis by Plasmodium falciparum dUTPase.

Deoxyuridine 5'-triphosphate nucleotidohydrolase (dUTPase) catalyzes the hydrolysis of dUTP to dUMP and pyrophosphate and plays an important role in nucleotide metabolism and DNA replication controlling relative cellular levels of dTTP/dUTP, both of which can be incorporated into DNA. Isothermal titration calorimetry has been applied to the determination of the kinetic and thermodynamic parameters of the trimeric Plasmodium falciparum dUTPase, a potential drug target against malaria. The role of divalent ions in binding, and inhibition by different uridine derivatives has been assessed. When dUTP hydrolysis in the presence of EDTA was evaluated, a 105-fold decrease and a 12-fold increase of the k(cat) and Km values, respectively, were observed when compared with the dUTP.Mg2+ complex. Calculation of the activation energy, E(a), and the thermodynamic activation parameters showed that the energetic barrier was approximately 4-fold higher when Mg2+ was depleted. Other divalent ions such as Co2+ or Mn2+ can substitute the physiological cofactor, however the k(cat) was significantly reduced compared to dUTP.Mg2+. Binding and inhibition by dU, dUMP, dUDP, and alpha,beta-imido-dUTP were analysed by ITC and compared with data obtained by spectrophotometric methods and binding equilibrium studies. Product inhibition (Kip dUMP: 99.34 microM) was insignificant yet Ki values for dUDP and alpha,beta-imido-dUTP were in the low micromolar range. The effect of ionic strength on protein stability was also monitored. DSC analysis evidenced a slight increase in the unfolding temperature, Tm, with increasing salt concentrations. Moreover, the thermal unfolding pathway in the presence of salt fits adequately to an irreversible two-state model (N3-->3D).

Ferrocene-beta-cyclodextrin conjugates: synthesis, supramolecular behavior, and use as electrochemical sensors.

Ferrocene with a beta-cyclodextrin unit bound to one or both cyclopentadienyl rings through the secondary face were conveniently synthesized by regiospecific copper(I)-catalyzed cycloaddition of 2-O-propargyl-beta-cyclodextrin to azidomethyl or bis(azidomethyl)ferrocene. The supramolecular behavior of the synthesized conjugates in both the absence and presence of bile salts (sodium cholate, deoxycholate, and chenodeoxycholate) was studied by using electrochemical methods (cyclic and differential pulse voltammetry), isothermal titration calorimetry, and NMR spectroscopy (PGSE, CPMG, and 2D-ROESY). These techniques allowed the determination of stability constants, mode of inclusion, and diffusion coefficients for complexes formed with the neutral and, in some cases, the oxidized states of the ferrocenyl conjugates. It was found that the ferrocenyl conjugate with one beta-cyclodextrin unit forms a redox-controllable head-to-head homodimer in aqueous solution. The ferrocene-bis(beta-cyclodextrin) conjugate is present in two distinguishable forms in aqueous solution, each one having a different half-wave oxidation potential for the oxidation of the ferrocene. By contrast, only one distinguishable form for the oxidized state of the ferrocene-beta-cyclodextrin conjugate is detectable. The redox-sensing abilities of the synthesized conjugates towards the bile salts were evaluated based on the observed guest-induced changes in both the half-wave potential and the current peak intensity of the electroactive moiety.

Ferrocene-carbohydrate conjugates as electrochemical probes for molecular recognition studies.

We report two methods that have allowed the attachment of glucose, mannose and lactose to one or both of the cyclopentadienyl rings of ferrocene. The resulting ferrocene-carbohydrate conjugates were synthesised by the reaction of thioglycosides with ferrocenemethanol and 1,1'-ferrocenedimethanol in acidic media. A second method based on the regiospecific copper(I)-catalysed cycloaddition of propargyl glycoside, azidomethyl and bis(azidomethyl)ferrocene as well as azidoethyl glycoside and ethynylferrocene was also used and led to the synthesis of 1,2,3-triazole-containing glycoconjugates. The electrochemical behaviour of the synthesised glycoconjugates was investigated. In addition, their binding interactions with beta-cyclodextrin were studied by means of NMR spectroscopy, isothermal titration calorimetry, and cyclic and differential pulse voltammetric experiments. These techniques allowed the determination of the thermodynamic parameters of the complexes, the stability constants for the complexes formed with both the neutral and the oxidised states of the ferrocenyl glycoconjugates, the mode of inclusion and the diffusion coefficients for both the glycoconjugates and the complexes.

Design of Engineered Cyclodextrin Derivatives for Spontaneous Coating of Highly Porous Metal-Organic Framework Nanoparticles in Aqueous Media.

Nanosized metal-organic frameworks (nanoMOFs) MIL-100(Fe) are highly porous and biodegradable materials that have emerged as promising drug nanocarriers. A challenging issue concerns their surface functionalization in order to evade the immune system and to provide molecular recognition ability, so that they can be used for specific targeting. A convenient method for their coating with tetraethylene glycol, polyethylene glycol, and mannose residues is reported herein. The method consists of the organic solvent-free self-assembly on the nanoMOFs of building blocks based on ß-cyclodextrin facially derivatized with the referred functional moieties, and multiple phosphate groups to anchor to the nanoparticles' surface. The coating of nanoMOFs with cyclodextrin phosphate without further functional groups led to a significant decrease of macrophage uptake, slightly improved by polyethylene glycol or mannose-containing cyclodextrin phosphate coating. More notably, nanoMOFs modified with tetraethylene glycol-containing cyclodextrin phosphate displayed the most efficient "stealth" effect. Mannose-coated nanoMOFs displayed a remarkably enhanced binding affinity towards a specific mannose receptor, such as Concanavalin A, due to the multivalent display of the monosaccharide, as well as reduced macrophage internalization. Coating with tetraethylente glycol of nanoMOFs after loading with doxorubicin is also described. Therefore, phosphorylated cyclodextrins offer a versatile platform to coat nanoMOFs in an organic solvent-free, one step manner, providing them with new biorecognition and/or "stealth" properties.

Comb-like dextran copolymers: A versatile strategy to coat highly porous MOF nanoparticles with a PEG shell.

Nanoparticles made of metal-organic frameworks (nanoMOFs) are becoming of increasing interest as drug carriers. However, engineered coatings such as poly(ethylene glycol) (PEG) based ones are required to prevent nanoMOFs recognition and clearance by the innate immune system, a prerequisite for biomedical applications. This still presents an important challenge due to the highly porous structure and degradability of nanoMOFs. We provide here a proof of concept that the surface of iron-based nanoMOFs can be functionalized in a rapid, organic solvent-free and non-covalent manner using a novel family of comb-like copolymers made of dextran (DEX) grafted with both PEG and alendronate (ALN) moieties, which are iron complexing groups to anchor to the nanoMOFs surface. We describe the synthesis of DEX-ALN-PEG copolymers by click chemistry, with control of both the amount of PEG and ALN moieties. Stable DEX-ALN-PEG coatings substantially decreased their internalization by macrophages in vitro, providing new perspectives for biomedical applications.

Ferrocene-mannose conjugates as electrochemical molecular sensors for concanavalin A lectin.

The binding affinity of a series of electroactive glycoconjugates, based on a ferrocene core bearing alpha-mannose units on one or both of its cyclopentadienyl rings, to lectin Con A was studied by isothermal titration calorimetry (ITC) and voltammetry. Voltammetric measurements were performed by differential pulse adsorptive stripping voltammetry (DPAdSV). Upon complexation of ferrocene-mannose conjugates with Con A, voltammograms showed a decrease of the peak current. Both the monomannosylated ferrocene and the bis(mannosylated) ferrocene derivatives form more stable complexes with Con A than methyl alpha-D-mannopyranoside. Bis(mannosylated) ferrocene conjugates were found to bind to Con A with enhanced affinity due to the multivalent effect. A comparison of the thermodynamic data obtained by ITC and voltammetry is presented.

Cyclodextrin-Modified inorganic materials for the construction of nanocarriers.

Inorganic nanoparticles, such as gold, silver, quantum dots and magnetic nanoparticles, offer a promising way to develop multifunctional nanoparticles for biomedical applications. Such nanoparticles have the potential to combine in a single, stable construct various functionalities, simultaneously providing imaging abilities, thermal therapies and the ability to deliver drugs in a targeted fashion. An approach for providing drug loading abilities to these inorganic nanoparticles consists in the modification of their surface with a coating of cyclodextrins, and thereby endowing the nanoparticles with the potential of functioning as drug nanocarriers. This review presents the advances carried out in the preparation of cyclodextrin-contained gold, silver, quantum dot and magnetic nanoparticles as well as their applications as drug nanocarriers. The nanoparticle surface can be modified incorporating cyclodextrin moieties, (i) in situ during the synthesis of the nanoparticles, either using the cyclodextrin as reducing agent or as stabilizer; or (ii) in a post-synthetic stage. The cyclodextrin coating contributes to provide biocompatibility to the nanoparticles and to reduce their cytotoxicity. Cyclodextrin-modified nanoparticles display a multivalent presentation of quasi-hydrophobic cavities that enables, not only drug loading in a non-covalent manner, but also the non-covalent assembly of targeting motifs and optical probes. This paper also provides an overview of some of the reported applications including the in vitro studies and, to a lesser extent, in vivo studies on the drug-loaded nanoparticles behavior.

A threading receptor for polysaccharides.

Cellulose, chitin and related polysaccharides are key renewable sources of organic molecules and materials. However, poor solubility tends to hamper their exploitation. Synthetic receptors could aid dissolution provided they are capable of cooperative action, for example by multiple threading on a single polysaccharide molecule. Here we report a synthetic receptor designed to form threaded complexes (polypseudorotaxanes) with these natural polymers. The receptor binds fragments of the polysaccharides in aqueous solution with high affinities (K(a) up to 19,000 M(-1)), and is shown--by nuclear Overhauser effect spectroscopy--to adopt the threading geometry. Evidence from induced circular dichroism and atomic force microscopy implies that the receptor also forms polypseudorotaxanes with cellulose and its polycationic analogue chitosan. The results hold promise for polysaccharide solubilization under mild conditions, as well as for new approaches to the design of biologically active molecules.

Electrochemical detection of glutathione S-transferase: an important enzyme in the cell protective mechanism against oxidative stress.

Oxidative stress arises when the antioxidant capacity of cells to clean the excess production of reactive oxygen species (ROS) decreases. Several human diseases seem to be related with an increment in the oxidative stress. In this regard, GSH present in the cells works by neutralizing ROS and other xenobiotics through the glutathione S-transferase (GST) enzyme. Thus, the level of expression of GST is an important factor in determining the sensitivity of cells to toxic chemicals or xenobiotic compounds. Therefore, the detection of GST levels is fundamental in the clinical diagnosis of ROS-related diseases. Here, we describe a methodology, based on the voltammetric properties of the ferrocene group (used as electrochemical probe), which can be applied for selective detection of GST levels in human cells. The electrochemical signal measured is associated to the specific interaction of a ferrocenyl-GSH derivate with the G- and H-sites of this enzyme.