PLS-R Calibration Models for Wine Spirit Volatile Phenols Prediction by Near-Infrared Spectroscopy.

Near-infrared spectroscopic (NIR) technique was used, for the first time, to predict volatile phenols content, namely guaiacol, 4-methyl-guaiacol, eugenol, syringol, 4-methyl-syringol and 4-allyl-syringol, of aged wine spirits (AWS). This study aimed to develop calibration models for the volatile phenol's quantification in AWS, by NIR, faster and without sample preparation. Partial least square regression (PLS-R) models were developed with NIR spectra in the near-IR region (12,500-4000 cm-1) and those obtained from GC-FID quantification after liquid-liquid extraction. In the PLS-R developed method, cross-validation with 50% of the samples along a validation test set with 50% of the remaining samples. The final calibration was performed with 100% of the data. PLS-R models with a good accuracy were obtained for guaiacol (r2 = 96.34; RPD = 5.23), 4-methyl-guaiacol (r2 = 96.1; RPD = 5.07), eugenol (r2 = 96.06; RPD = 5.04), syringol (r2 = 97.32; RPD = 6.11), 4-methyl-syringol (r2 = 95.79; RPD = 4.88) and 4-allyl-syringol (r2 = 95.97; RPD = 4.98). These results reveal that NIR is a valuable technique for the quality control of wine spirits and to predict the volatile phenols content, which contributes to the sensory quality of the spirit beverages.

Influence of the Storage in Bottle on the Antioxidant Activities and Related Chemical Characteristics of Wine Spirits Aged with Chestnut Staves and Micro-Oxygenation.

Different ageing technology of wine spirits (WSs) has been investigated, but little has been published on the chemical evolution of aged WS during storage in bottle. The purpose of this study was to examine how 12 months of storage in bottle affected the evolution of antioxidant activity (DPPH, FRAP and ABTS assays), total phenolic index (TPI) and low molecular weight (LMW) compounds content of the WSs aged through alternative technology using three micro-oxygenation levels (MOX) and nitrogen control (N). Results revealed the ability of phenolic compounds from aged WSs to scavenge free radicals during storage in bottle. Among the in vitro antioxidant-activity methods, FRAP assay was the more effective to differentiate WSs according to the ageing technology. Concerning the overall influence of storage in bottle on antioxidant activity, and TPI and LMW compounds content, the higher results were obtained for the MOX modalities (O15, O30 and O60), which showed a similar evolution. In summary, this study provides innovative information, demonstrating that the differences between the aged WSs imparted throughout the ageing process (resulting from different MOX levels) were mostly retained, and only slight modifications during storage in bottle were found.

Behaviour of Low Molecular Weight Compounds, Iron and Copper of Wine Spirit Aged with Chestnut Staves under Different Levels of Micro-Oxygenation.

Alternative technologies for a more sustainable wine spirits' ageing have been studied but a lack of knowledge on the effect of oxygenation level remains. This work examined the behaviour of low molecular weight compounds, iron and copper of a wine spirit aged in 50 L demijohns with chestnut wood staves combined with three levels of micro-oxygenation or nitrogen. Compounds and mineral elements were quantified by HPLC and FAAS, respectively, in samples collected at 8, 21, 60, 180, 270 and 365 days of ageing. Results showed that most of the compounds underwent significant changes in their content over time and behave differently depending on the wine spirit's oxygenation level: higher contents of gallic acid, syringic acid and vanillin were associated with lower micro-oxygenation level while higher contents of ellagic acid, syringaldehyde, coniferaldehyde and sinapaldehyde resulted from higher one; lowest contents of these compounds were found in the nitrogen modality. Weak correlation between copper and the studied compounds was evidenced whereas closer relationship between iron, vanillin, gallic, syringic and ellagic acids at end of ageing was observed. This study provides innovative information on the role of oxygen in wine spirit's ageing, and on chestnut wood effect on wine spirit's mineral composition.

Simultaneous Determination of Ethanol and Methanol in Wines Using FTIR and PLS Regression.

Accurate quantification of ethanol and methanol is essential for regulatory compliance and product quality assurance. Fourier Transform Infrared Spectroscopy (FTIR) offers rapid, non-destructive analysis with minimal sample preparation, making it a promising tool for wine analysis. In this exploratory study, the use of FTIR and PLS regression for the simultaneous quantification of ethanol and methanol in wine samples of 11 different Portuguese mono-varietal wines and different vintages deriving from the same winery in Lisbon was investigated. A model was developed, demonstrating the feasibility of FTIR and PLS regression for the simultaneous quantification of ethanol and methanol in wine samples through dedicated models; it showed good prediction capacity for ethanol determination but poorer performance for methanol quantification. The model could be reliable enough for quality control in wine production, but to improve its performance should be enhanced in the future with more samples from different origins, wine types, and a wider concentration range in the case of methanol.

Shedding Light on Metals Release from Chestnut Wood to Wine Spirit Using ICP-MS.

Possible effects caused by mineral elements during wine spirit ageing are diverse. In this study, the evolution of the mineral composition of wine spirit during ageing with chestnut (Castanea sativa Mill.) wood was investigated. A wine distillate was aged in 250 L wooden barrels (traditional ageing) and in 50 L glass demijohns with wood staves and micro-oxygenation (alternative ageing). Sampling was performed after 21, 60, 180, 270, and 365 days of ageing. The elemental composition of the wine spirits, including alkaline, alkaline earth metals, and heavy metals, was assessed by quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS). For most of the elements, no significant differences between wine spirits from distinct ageing modalities were observed. Ageing time had significant effect on most of them, with different trends and distinct magnitude of changes, depending on each specific element. The concentrations of the mineral elements found in the wine spirits were very low, especially those of heavy metals, which is quite positive in terms of quality and food safety. Novel information on metals released from chestnut wood to wine spirits confirms its appropriateness for ageing this beverage.

Identification of gallotannins and ellagitannins in aged wine spirits: A new perspective using alternative ageing technology and high-resolution mass spectrometry.

This research was focused on identifying gallotannins and ellagitannins degradation pathways to better understand their behavior in complex media such as wine spirits (WS). A WS was aged with chestnut wood staves with three levels of micro-oxygenation, nitrogen, and using wooden barrels. Gallotannins and ellagitannins were identified by LC-ESI-HRMS/MS using a Q-TOF in samples collected at 8, 21, 60, 180, 270, and 365 days of ageing, allowed comparing their relative abundances according to the ageing technology. It was established for the first time, the importance of oxygen in gallotannins and ellagitannins formation/degradation pathways in WS and shading light into the explanation for the steady increase of gallic and ellagic acid contents on WS during ageing. The results also highlighted the presence of penta-O-galloyl-ß-d-glucose, tetra-O-galloyl-ß-d-glucose, tri-O-galloyl-ß-d-glucose, di-O-galloyl-ß-d-glucose, and mono-O-galloyl-ß-d-glucose, 2,3-(S)-hexahydroxydiphenoyl-ß-d-glucose, pedunculagin, isomers vescalagin/castalagin and two products stemming from ethanol-promoted oxidation of castalagin/vescalagin and vescalin/castalin, in the composition WS aged with chestnut wood.

Effect of Barrel-to-Barrel Variation on Color and Phenolic Composition of a Red Wine.

Tangible variation of sensory characteristics is often observed in wine aged in similar barrels. Barrel-to-barrel variation in barrel-aged wines was investigated in respect of the most important phenolic compounds of oenological interest. A red wine was aged in 49 medium-toasted oak (Quercus petraea) barrels, from four cooperages, for 12 months. The resulting wines were evaluated for chromatic characteristics, anthocyanin-related parameters, total phenols, flavonoids and non-flavonoids phenols, flavanol monomers, and oligomeric and polymeric proanthocyanidins. PCA and ANOVA were applied to investigate the relationships between barrels and to assess cooperage and individual barrel effect. Three cooperages influenced the wine similarly during aging. Anthocyanin-related parameters showed the highest variation, 25-37%, other phenolics varied 3-8.5%, and with two exceptions, chromatic characteristics changed 1.7-3%. The relationship between the number of barrels and the expected variation for each analytical parameter was calculated, as reference for future measurements involving barrel lots, either in wine production or experimental design.

Effect of bentonite characteristics on the elemental composition of wine.

Physical, chemical, and mineralogical characteristics of six bentonites were assessed and related to their elemental release to wine. Extraction essays of bentonites in wine at three pH levels were carried out. The multielemental analysis of bentonites and wines was performed by atomic absorption spectrometry (AAS) and inductively coupled plasma mass spectrometry (ICP-MS). Bentonite addition resulted in significantly higher concentrations of Li, Be, Na, Mg, Al, Ca, Sc, V, Mn, Fe, Co, Ni, Ga, Ge, As, Sr, Y, Zr, Nb, Mo, Cd, Sn, Sb, Ba, W, Tl, Bi, and W. In contrast, the concentrations of B, K, Cu, Zn, and Rb significantly decreased. A strong correlation between Na concentrations of treated wines and its content in bentonite exchange complex was observed. Al and Fe contents reflected bentonite extractable aluminous and ferruginous constituents, while Be, Mg, Ca, V, Mn, Ni, Ge, Zr, Nb, Mo, Sn, Sb, Tl, Pb, and U concentrations reflected the elemental composition of bentonites. Several nonconformances with OIV specifications demonstrated the need for an effective control.

Effect of Wood Aging on Wine Mineral Composition and 87Sr/86Sr Isotopic Ratio.

The evolution of mineral composition and wine strontium isotopic ratio 87Sr/86Sr (Sr IR) during wood aging were investigated. A red wine was aged in stainless steel tanks with French oak staves (Quercus sessiliflora Salisb.), with three industrial scale replicates. Sampling was carried out after 30, 60, and 90 days of aging, and the wines were evaluated in terms of general analysis, phenolic composition, total polysaccharides, multielement composition, and Sr IR. Li, Be, Mg, Al, Sc, Ti, V, Mn, Co, Ni, Cu, Zn, Ga, Ge, As, Rb, Sr, Y, Zr, Mo, Sb, Cs, Ba, Pr, Nd, Sm, Eu, Dy, Ho, Er, Yb, Lu, Tl, and Pb elements and 87Sr/86Sr were determined by quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS) and Na, K, Ca, and Fe by flame atomic absorption spectrometry (FAAS). Two-way ANOVA was applied to assess wood aging and time effect on Sr IR and mineral composition. Wood aging resulted in significantly higher concentrations of Mg, V, Co, Ni, and Sr. At the end of the aging period, wine exhibited statistically identical Sr IR compared to control. Study suggests that wood aging does not affect 87Sr/86Sr, not precluding the use of this parameter for wine traceability purposes.

Focused ultrasound versus microwave digestion for the determination of lead in must by electrothermal-atomic absorption spectrometry.

The content of metals at the different stages of the winemaking process is of great concern because of legal and wine quality reasons. In the present work, we have developed a new fast procedure for metal extraction from must based on focused ultrasound with HNO3 and H2O2, with which microwave digestion of the must is not necessary. Lead was used as a model element to achieve the optimum combination of reagents in order to achieve total extraction. Results were compared with those obtained after microwave digestion of the samples. In addition, conventional and fast programs in conjunction with different matrix modifiers were studied. The method requires few sample mass (ca 0.5 g) and few reagents in low volume (HNO3 50 microL and H2O2 100 microL). The total sample treatment time is only 60 s.

Multiple lectin detection by cell membrane affinity binding.

Assuming that lectins evolved to recognise relatively complex and branched oligosaccharides or parts of them, rather than simple sugars, a procedure based on lectin affinity binding to isolated erythrocyte (or any other cell type) membranes is proposed. This methodology was validated using six pure commercial lectins, as well as lectins from total protein extracts of Arbutus unedo leaves. All commercial lectins, as well as five polypeptides from A. unedo leaves bound to the glycosylated membrane receptors and were eluted by the corresponding sugars. When compared to the standard affinity chromatography procedure involving an individual sugar bound to a solid matrix, the new method provides a single-step, effective detection method for lectins and allows the rapid screening of their profile present in any unknown protein solution, indicates their biological carbohydrate affinities as well as their sugar specificities (if any), enables the simultaneous analysis of a large number of samples, does not require any pre-purification steps, permits detection of additional lectins and provides data which are more relevant from the physiological point of view.

Measurements of contaminant elements of wines by inductively coupled plasma-mass spectrometry: A comparison of two calibration approaches.

The aim of the present work was to develop and validate an accurate method by ICP-MS focalized to the measurement of contaminant elements in wines, in special those with legal importance. In addition, we intended to evaluate the suitability of ICP-MS semi-quantitative methodology in order to reduce the time and cost of analysis. Twenty-six contaminant elements of wine (Li, Be, Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Ag, Cd, In, Cs, Ba, Hg, Tl, Pb, Bi and U) were measured using quantitative and semi-quantitative calibration approaches, in diluted white and red wines. In an early step potential interferences caused by Cl and Ca species were evaluated, in order to establish suitable mathematical corrections. For validation of ICP-MS procedures a few elements were determined by flame and electrothermal AAS. Reference wines from 1992 year, with provisional values, were analyzed and the results showed satisfactory agreement. The semi-quantitative calibration provided slightly higher limits of detection than those obtained by the quantitative calibration, and always lower than 0.1mugl(-1), except for Fe and Zn. For most elements the recovery percentages (between 90 and 100%) and precision of the results (R.S.D. (%)<4) were similar for both modes. Differences lower than 20% of concentration was obtained for most elements. Both methodologies offer valuable alternatives to wine characterization and comparison purposes. For legal requirements control purposes, with reference to the importance of accurate results, quantitative approach is the most suitable alternative.