Controlling the Adsorption of ß-Glucosidase onto Wrinkled SiO2 Nanoparticles To Boost the Yield of Immobilization of an Efficient Biocatalyst.

ß-Glucosidase (BG) catalyzes the hydrolysis of cellobiose to glucose, a substrate for fermentation to produce the carbon-neutral fuel bioethanol. Enzyme thermal stability and reusability can be improved through immobilization onto insoluble supports. Moreover, nanoscaled matrixes allow for preserving high reaction rates. In this work, BG was physically immobilized onto wrinkled SiO2 nanoparticles (WSNs). The adsorption procedure was tuned by varying the BG:WSNs weight ratio to achieve the maximum controllability and maximize the yield of immobilization, while different times of immobilization were monitored. Results show that a BG:WSNs ratio equal to 1:6 wt/wt provides for the highest colloidal stability, whereas an immobilization time of 24 h results in the highest enzyme loading (135 mg/g of support) corresponding to 80% yield of immobilization. An enzyme corona is formed in 2 h, which gradually disappears as the protein diffuses within the pores. The adsorption into the silica structure causes little change in the protein secondary structure. Furthermore, supported enzyme exhibits a remarkable gain in thermal stability, retaining complete folding up to 90 °C. Catalytic tests assessed that immobilized BG achieves 100% cellobiose conversion. The improved adsorption protocol provides simultaneously high glucose production, enhanced yield of immobilization, and good reusability, resulting in considerable reduction of enzyme waste in the immobilization stage.

Structural Organization of Cardiolipin-Containing Vesicles as Models of the Bacterial Cytoplasmic Membrane.

The bacterial cytoplasmic membrane is the innermost bacterial membrane and is mainly composed of three different phospholipid species, i.e., phosphoethanolamine (PE), phosphoglycerol (PG), and cardiolipin (CL). In particular, PG and CL are responsible for the negative charge of the membrane and are often the targets of cationic antimicrobial agents. The growing resistance of bacteria toward the available antibiotics requires the development of new and more efficient antibacterial drugs. In this context, studying the physicochemical properties of the bacterial cytoplasmic membrane is pivotal for understanding drug-membrane interactions at the molecular level as well as for designing drug-testing platforms. Here, we discuss the preparation and characterization of PE/PG/CL vesicle suspensions, which contain all of the main lipid components of the bacterial cytoplasmic membrane. The vesicle suspensions were characterized by means of small-angle neutron scattering, dynamic light scattering, and electron paramagnetic spectroscopy. By combining solution scattering and spectroscopy techniques, we propose a detailed description of the impact of different CL concentrations on the structure and dynamics of the PE/PG bilayer. CL induces the formation of thicker bilayers, which exhibit higher curvature and are overall more fluid. The experimental results contribute to shed light on the structure and dynamics of relevant model systems of the bacterial cytoplasmic membrane.

Charge-Transfer Interactions Stabilize G-Quadruplex-Forming Thrombin Binding Aptamers and Can Improve Their Anticoagulant Activity.

In the search for optimized thrombin binding aptamers (TBAs), we herein describe the synthesis of a library of TBA analogues obtained by end-functionalization with the electron-rich 1,5-dialkoxy naphthalene (DAN) and the electron-deficient 1,8,4,5-naphthalenetetra-carboxylic diimide (NDI) moieties. Indeed, when these G-rich oligonucleotides were folded into the peculiar TBA G-quadruplex (G4) structure, effective donor-acceptor charge transfer interactions between the DAN and NDI residues attached to the extremities of the sequence were induced, providing pseudo-cyclic structures. Alternatively, insertion of NDI groups at both extremities produced TBA analogues stabilized by π-π stacking interactions. All the doubly-modified TBAs were characterized by different biophysical techniques and compared with the analogues carrying only the DAN or NDI residue and unmodified TBA. These modified TBAs exhibited higher nuclease resistance, and their G4 structures were markedly stabilized, as evidenced by increased Tm values compared to TBA. These favorable properties were also associated with improved anticoagulant activity for one DAN/NDI-modified TBA, and for one NDI/NDI-modified TBA. Our results indicated that TBA pseudo-cyclic structuring by ad hoc designed end-functionalization represents an efficient approach to improve the aptamer features, while pre-organizing and stabilizing the G4 structure but allowing sufficient flexibility to the aptamer folding, which is necessary for optimal thrombin recognition.

Synthesis and Characterization of Multifunctional Nanovesicles Composed of POPC Lipid Molecules for Nuclear Imaging.

The integration of nuclear imaging analysis with nanomedicine has tremendously grown and represents a valid and powerful tool for the development and clinical translation of drug delivery systems. Among the various types of nanostructures used as drug carriers, nanovesicles represent intriguing platforms due to their capability to entrap both lipophilic and hydrophilic agents, and their well-known biocompatibility and biodegradability. In this respect, here we present the development of a labelling procedure of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine)-based liposomes incorporating an ad hoc designed lipophilic NOTA (1,4,7-triazacyclononane-1,4,7-triacetic acid) analogue, derivatized with an oleic acid residue, able to bind the positron emitter gallium-68(III). Based on POPC features, the optimal conditions for liposome labelling were studied with the aim of optimizing the Ga(III) incorporation and obtaining a significant radiochemical yield. The data presented in this work demonstrate the feasibility of the labelling procedure on POPC liposomes co-formulated with the ad hoc designed NOTA analogue. We thus provided a critical insight into the practical aspects of the development of vesicles for theranostic approaches, which in principle can be extended to other nanosystems exploiting a variety of bioconjugation protocols.

Design, Synthesis and Characterization of Cyclic NU172 Analogues: A Biophysical and Biological Insight.

NU172-a 26-mer oligonucleotide able to bind exosite I of human thrombin and inhibit its activity-was the first aptamer to reach Phase II clinical studies as an anticoagulant in heart disease treatments. With the aim of favoring its functional duplex-quadruplex conformation and thus improving its enzymatic stability, as well as its thrombin inhibitory activity, herein a focused set of cyclic NU172 analogues-obtained by connecting its 5'- and 3'-extremities with flexible linkers-was synthesized. Two different chemical approaches were exploited in the cyclization procedure, one based on the oxime ligation method and the other on Cu(I)-assisted azide-alkyne cycloaddition (CuAAC), affording NU172 analogues including circularizing linkers with different length and chemical nature. The resulting cyclic NU172 derivatives were characterized using several biophysical techniques (ultraviolet (UV) and circular dichroism (CD) spectroscopies, gel electrophoresis) and then investigated for their serum resistance and anticoagulant activity in vitro. All the cyclic NU172 analogues showed higher thermal stability and nuclease resistance compared to unmodified NU172. These favorable properties were, however, associated with reduced-even though still significant-anticoagulant activity, suggesting that the conformational constraints introduced upon cyclization were somehow detrimental for protein recognition. These results provide useful information for the design of improved analogues of NU172 and related duplex-quadruplex structures.

The antimicrobial peptide Magainin-2 interacts with BamA impairing folding of E. coli membrane proteins.

Antimicrobial peptides (AMPs) are a unique and diverse group of molecules endowed with a broad spectrum of antibiotics properties that are being considered as new alternative therapeutic agents. Most of these peptides are membrane-active molecules, killing bacteria by membrane disruption. However, recently an increasing number of AMPs was shown to enter bacterial cells and target intracellular processes fundamental for bacterial life. In this paper we investigated the mechanism of action of Maganin-2 (Mag-2), a well-known antimicrobial peptide isolated from the African clawed frog Xenopus laevis, by functional proteomic approaches. Several proteins belonging to E. coli macromolecular membrane complexes were identified as Mag-2 putative interactors. Among these, we focused our attention on BamA a membrane protein belonging to the BAM complex responsible for the folding and insertion of nascent ß-barrel Outer Membrane Proteins (OMPs) in the outer membrane. In silico predictions by molecular modelling, in vitro fluorescence binding and Light Scattering experiments carried out using a recombinant form of BamA confirmed the formation of a stable Mag-2/BamA complex and indicated a high affinity of the peptide for BamA. Functional implications of this interactions were investigated by two alternative and complementary approaches. The amount of outer membrane proteins OmpA and OmpF produced in E. coli following Mag-2 incubation were evaluated by both western blot analysis and quantitative tandem mass spectrometry in Multiple Reaction Monitoring scan mode. In both experiments a gradual decrease in outer membrane proteins production with time was observed as a consequence of Mag-2 treatment. These results suggested BamA as a possible good target for the rational design of new antibiotics since this protein is responsible for a crucial biological event of bacterial life and is absent in humans.

Polysaccharide corona: The acetyl-rich envelope wraps the extracellular membrane vesicles and the cells of Shewanella vesiculosa providing adhesiveness.

Bacterial extracellular membrane vesicles (EMVs) play an active role in many physiological and pathogenic processes. Here, we report the identification and the detailed structural characterization of the capsular polysaccharide from both cells and EMVs from Shewanella vesiculosa by NMR and chemical analysis. The polysaccharide consists of a pentasaccharide repeating unit containing neutral monosaccharides together with amino sugars, of which one has never been isolated from a natural source. The adhesion ability of the polymer both on synthetic surfaces, such as polystyrene nanoparticles and on vesicles with a bilayer mimicking the bacterial membrane in the presence and absence of lipopolysaccharide was investigated. In both cases, a "CPS-corona" that could be the first stage of biofilm formation was observed. The polymer also activates Caspases on colon cancer cells, making S. vesiculosa EMVs as natural nanocarriers for drug delivery.

Lipopolysaccharide O-antigen molecular and supramolecular modifications of plant root microbiota are pivotal for host recognition.

Lipopolysaccharides, the major outer membrane components of Gram-negative bacteria, are crucial actors of the host-microbial dialogue. They can contribute to the establishment of either symbiosis or bacterial virulence, depending on the bacterial lifestyle. Plant microbiota shows great complexity, promotes plant health and growth and assures protection from pathogens. How plants perceive LPS from plant-associated bacteria and discriminate between beneficial and pathogenic microbes is an open and urgent question. Here, we report on the structure, conformation, membrane properties and immune recognition of LPS isolated from the Arabidopsis thaliana root microbiota member Herbaspirillum sp. Root189. The LPS consists of an O-methylated and variously acetylated D-rhamnose containing polysaccharide with a rather hydrophobic surface. Plant immunology studies in A. thaliana demonstrate that the native acetylated O-antigen shields the LPS from immune recognition whereas the O-deacylated one does not. These findings highlight the role of Herbaspirillum LPS within plant-microbial crosstalk, and how O-antigen modifications influence membrane properties and modulate LPS host recognition.

Role of EPS in mitigation of plant abiotic stress: The case of Methylobacterium extorquens PA1.

Methylobacterium extorquens is a facultative methylotrophic Gram-negative bacterium, often associated with plants, that exhibits a unique ability to grow in the presence of high methanol concentrations, which serves as a single carbon energy source. We found that M. extorquens strain PA1 secretes a mixture of different exopolysaccharides (EPSs) when grown in reference medium or in presence of methanol, that induces the secretion of a peculiar and heterogenous mixture of EPSs, with different structure, composition, repeating units, bulk and a variable degree of methylation. These factors influenced 3D structure and supramolecular assets, diffusion properties and hydrodynamic radius, and likely contribute to increase methanol tolerance and cell stability. No direct methanol involvement in the EPSs solvation shell was detected, indicating that the polymer exposure to methanol is water mediated. The presence of methanol induces no changes in size and shape of the polymer chains, highlighting how water-methanol mixtures are a good solvent for refEPS and metEPS.

Phase Inversion and Interfacial Layer Microstructure in Emulsions Stabilized by Glycosurfactant Mixtures.

Identification of strategies to prolong emulsion kinetic stability is a fundamental challenge for many scientists and technologists. We investigated the relationship between the emulsion stability and the surfactant supramolecular organization at the oil-water interface. The pseudo-phase diagrams of emulsions formed by water and, alternatively, a linear or a branched oil, stabilized by mixtures of two sugar-based surfactants, Span80 and Tween80, are presented. The surfactant ordering and dynamics were analyzed by electron paramagnetic resonance (EPR) spectroscopy. In Oil-in-Water (O/W) emulsions, which are stable for more than four days, disordered surfactant tails formed a compact and viscous layer. In Water-in-Oil (W/O) emulsions, whose stability is much lower, surfactants formed an ordered layer of extended tails pointing toward the continuous apolar medium. If linear oil was used, a narrow range of surfactant mixture composition existed, in which emulsions did not demix in the whole range of water/oil ratio, thus making it possible to study the phase inversion from O/W to W/O structures. While conductometry showed an abrupt inversion occurring at a well-defined water/oil ratio, the surfactant layer microstructure changed gradually between the two limiting situations. Overall, our results demonstrate the interconnection between the emulsion stability and the surfactant layer microstructuring, thus indicating directions for their rational design.

Bioinspired antibacterial PVA/Melanin-TiO2 hybrid nanoparticles: the role of poly-vinyl-alcohol on their self-assembly and biocide activity.

Hybrid Melanin-TiO2 nanoparticles are promising bioinspired antibacterial agents for biomedical coatings and food-packaging fields. However, due to a very low colloidal stability, they showed a high tendency to self-aggregate and rapidly precipitate, making not easy their use in aqueous medium to produce homogeneous antimicrobial coatings or nanocomposites. A valid strategy to improve their dispersion is the combination with a hydrophilic water-soluble polymer such as poly-vinyl-alcohol (PVA), which is a good choice to improve the colloidal stability of nanoparticles and to modulate their agglomeration. In this work, we propose an in-situ synthetic approach based on the hydrothermal route, by which the hybrid Melanin-TiO2 nanoparticles were prepared starting from the inorganic and organic precursors in the presence of PVA. Combined approach of TEM, XRD, TG/DSC, EPR and DLS techniques allows for assessing the PVA role in the formation of hybrids and on their morphological features as well as colloidal stability and aqueous dispersion. Antibacterial tests demonstrated the biocide activity of PVA/Melanin-TiO2 nanoparticles against Escherichia coli bacterial cultures, which resulted partially influenced by the PVA content. This study provides key information on the mutual influence of organic/inorganic components on the functional properties of the final hybrid nanocomposites, contributing to define a much more far-reaching implementation in the synthesis of bioinspired polymer-based nanocomposites.

Bioinspired Nanoemulsions Stabilized by Phosphoethanolamine and Phosphoglycerol Lipids.

Water-in-oil (W/O) nanoemulsions stabilized by phospholipids (PLs) are increasingly exploited in a wide spectrum of applications, from pharmaceuticals to food and cosmetic formulations. In this work, we report the design and optimization of an innovative emulsion based on a mixture of phosphoethanolamine (PE) and phosphoglycerol (PG) PLs, inspired by the composition of the inner leaflet of a bacterial outer membrane. Using the natural oil squalene as the continuous organic phase, no additional emulsion stabilizer is needed. On the other hand, a small amount of Span 80 is required when dodecane is used. The obtained nanoemulsions are stable for at least two hours, thus allowing the droplet size and distribution to be characterized by Dynamic Light Scattering (DLS) and the lipid layer structure and dynamics to be analyzed by Electron Paramagnetic Resonance (EPR) spectroscopy. The results indicate that squalene shallowly intercalates among the lipid tail termini, being unable to deeply penetrate the adsorbed lipid monolayer. The altered lipid dynamics are proposed to be the reason for the enhanced emulsion stability, this paving the way to future implementations and possible applications.