Interplay Effects in the Co-Doping of ZnO Nanowires with Al and Ga Using Chemical Bath Deposition.

The simultaneous co-doping of ZnO nanowires grown by chemical bath deposition is of high interest for a large number of engineering devices, but the process conditions required and the resulting physicochemical processes are still largely unknown. Herein, we show that the simultaneous co-doping of ZnO nanowires with Al and Ga following the addition of Al(NO3)3 and Ga(NO3)3 in the chemical bath operates in a narrow range of conditions in the high-pH region, where the adsorption processes of respective Al(OH)4- and Ga(OH4)- complexes on the positively charged m-plane sidewalls are driven by attractive electrostatic forces. The structural morphology and properties of ZnO nanowires are significantly affected by the co-doping and mainly governed by the effect of Al(III) species. The incorporation processes of Al and Ga dopants are characterized by significant interplay effects, and the amount of incorporated Ga dopants into ZnO nanowires is found to be larger than the amount of incorporated Al dopants owing to energetic considerations. The Al and Ga dopants are located in the bulk of ZnO nanowires, but a part of Al and Ga lies on their surfaces, their incorporation processes in the bulk being enhanced by thermal annealing under oxygen atmosphere. Eventually, the Al and Ga dopants directly affect the incorporation of hydrogen-related defects, notably by annihilating the formation of VZn-nH defect complexes. These findings present an efficient strategy to proceed with the co-doping of ZnO nanowires grown by chemical bath deposition, opening perspectives to control their electronic structure properties with a higher precision.

Chemical Bath Deposition of ZnO Nanowires Using Copper Nitrate as an Additive for Compensating Doping.

The controlled incorporation of dopants like copper into ZnO nanowires (NWs) grown by chemical bath deposition (CBD) is still challenging despite its critical importance for the development of piezoelectric devices. In this context, the effects of the addition of copper nitrate during the CBD of ZnO NWs grown on Au seed layers are investigated in detail, where zinc nitrate and hexamethylenetetramine are used as standard chemical precursors and ammonia as an additive to tune the pH. By combining thermodynamic simulations with chemical and structural analyses, we show that copper oxide nanocrystals simultaneously form with ZnO NWs during the CBD process in the low-pH region associated with large supersaturation of Cu species. The Cu(II) and Zn(II) speciation diagrams reveal that both species show very similar behaviors, as they predominantly form either X2+ ions (with X = Cu or Zn) or X(NH3)42+ ion complexes, depending on the pH value. Owing to their similar ionic structures, Cu2+ and Cu(NH3)42+ ions preferentially formed in the low- and high-pH regions, respectively, are able to compete with the corresponding Zn2+ and Zn(NH3)42+ ions to adsorb on the c-plane top facets of ZnO NWs despite repulsive electrostatic interactions, yielding the significant incorporation of Cu. At the highest pH value, additional attractive electrostatic interactions between the Cu(NH3)42+ ion complexes and negatively charged c-plane top facets further enhance the incorporation of Cu into ZnO NWs. The present findings provide a deep insight into the physicochemical processes at work during the CBD of ZnO NWs following the addition of copper nitrate, as well as a detailed analysis of the incorporation mechanisms of Cu into ZnO NWs, which are considered beyond the only electrostatic forces usually driving the incorporation of dopants such as Al and Ga.

Chemical Synthesis of ß-Ga2O3 Microrods on Silicon and Its Dependence on the Gallium Nitrate Concentration.

ß-Ga2O3 microrods have attracted increasing attention for their integration into solar blind/UV photodetectors and gas sensors. However, their synthesis using a low-temperature chemical route in aqueous solution is still under development, and the physicochemical processes at work have not yet been elucidated. Here, we develop a double-step process involving the growth of α-GaOOH microrods on silicon using chemical bath deposition and their further structural conversion to ß-Ga2O3 microrods by postdeposition thermal treatment. It is revealed that the concentration of gallium nitrate has a drastic effect on tuning the morphology, dimensions (i.e., diameter and length), and density of α-GaOOH microrods over a broad range, in turn governing the morphological properties of ß-Ga2O3 microrods. The physicochemical processes in aqueous solution are investigated by thermodynamic computations yielding speciation diagrams of Ga(III) species and theoretical solubility plots of GaOOH(s). In particular, the qualitative evolution of the morphological properties of α-GaOOH microrods with the concentration of gallium nitrate is found to be correlated with the supersaturation in the bath and discussed in light of the standard nucleation and growth theory. Interestingly, the structural conversion following the thermal treatment at 900 °C in air results in the formation of pure ß-Ga2O3 microrods without any residual minor phases and with tunable morphology and improved structural ordering. These findings reporting a double-step process for forming high-quality pure ß-Ga2O3 microrods on silicon open many perspectives for their integration onto a large number of substrates for solar blind/UV photodetection and gas sensing.

The Path of Gallium from Chemical Bath into ZnO Nanowires: Mechanisms of Formation and Incorporation.

ZnO nanowires grown by chemical bath deposition (CBD) are of high interest, but their doping with extrinsic elements including gallium in aqueous solution is still challenging despite its primary importance for transparent electrodes and electronics, and for mid-infrared plasmonics. We elucidate the formation mechanisms of ZnO nanowires by CBD using zinc nitrate and hexamethylenetetramine as standard chemical precursors, as well as gallium nitrate and ammonia as chemical additives. A complete growth diagram, revealing the effects of both the relative concentration of gallium nitrate and pH, is gained by combining a thorough experimental approach with thermodynamic computations yielding theoretical solubility plots as well as Zn(II) and Ga(III) speciation diagrams. The role of Ga(OH)4- complexes is specifically shown as capping agents on the m-plane sidewalls of ZnO nanowires, enhancing their development and hence decreasing their aspect ratio. Additionally, the gallium incorporation into ZnO nanowires is investigated in detail by chemical analyses and Raman scattering. They show the predominant formation of gallium substituting for zinc atoms (GaZn) in as-grown ZnO nanowires and their partial conversion into GaZn-VZn complexes after postdeposition annealing under oxygen atmosphere. The conversion is further related to a significant relaxation of the strain level in ZnO nanowires. These findings reporting the physicochemical processes at work during the formation of ZnO nanowires and the related gallium incorporation mechanisms offer a general strategy for their extrinsic doping and open the way for carefully controlling their physical properties as required for nanoscale device engineering.

Well-ordered ZnO nanowires with controllable inclination on semipolar ZnO surfaces by chemical bath deposition.

Controlling the formation of ZnO nanowire (NW) arrays on a wide variety of substrates is crucial for their efficient integration into nanoscale devices. While their nucleation and growth by chemical bath deposition (CBD) have intensively been investigated on non-polar and polar c-plane ZnO surfaces, their formation on alternatively oriented ZnO surfaces has not been addressed yet. In this work, the standard CBD technique of ZnO is investigated on [Formula: see text] and [Formula: see text] semipolar ZnO single crystal surfaces. A uniform nanostructured layer consisting of tilted ZnO NWs is formed on the [Formula: see text] surface while elongated nanostructures are coalesced into a two-dimensional compact layer on the [Formula: see text] surface. By further combining the CBD with selective area growth (SAG) using electron beam-assisted lithography, highly tilted well-ordered ZnO NWs with high structural uniformity are grown on the [Formula: see text] patterned surface. The structural analysis reveals that ZnO NWs are homoepitaxially grown along the polar c-axis. The occurrence of quasi-transverse and -longitudinal optical phonon modes in Raman spectra is detected and their origin and position are explained in the framework of the Loudon's model. These results highlight the possibility to form ZnO NWs on original semipolar ZnO surfaces. It also opens the way for comprehensively understanding the nucleation and growth of ZnO NW arrays on poorly and highly textured polycrystalline ZnO seed layers composed of nanoparticles with a wide range of non-polar, semipolar, and polar plane orientations. Eventually, the possibility to tune both the inclination and dimensions of well-ordered ZnO NW arrays by using SAG on semipolar surfaces is noteworthy for photonic and optoelectronic nanoscale devices.

Effects of the pH on the Formation and Doping Mechanisms of ZnO Nanowires Using Aluminum Nitrate and Ammonia.

The elucidation of the fundamental processes in aqueous solution during the chemical bath deposition of ZnO nanowires (NWs) using zinc nitrate and hexamethylenetetramine is of great significance: however, their extrinsic doping by foreign elements for monitoring their optical and electrical properties is still challenging. By combining thermodynamic simulations yielding theoretical solubility plots and speciation diagrams with in situ pH measurements and structural, chemical, and optical analyses, we report an in-depth understanding of the pH effects on the formation and aluminum doping mechanisms of ZnO NWs. By the addition of aluminum nitrate with a given relative concentration for the doping and of ammonia over a broad range of concentrations, the pH is shown to strongly influence the shape, diameter, length, and doping magnitude of ZnO NWs. Tuning the dimensions of ZnO NWs by inhibition of their radial growth only proceeds over a specific pH range, where negatively charged Al(OH)4- complexes are predominantly formed and act as capping agents by electrostatically interacting with the positively charged m-plane sidewalls. These complexes further favor the aluminum incorporation and doping of ZnO NWs, which only operate over the same pH range following thermal annealing above 200 °C. These findings reporting a full chemical synthesis diagram reveal the significance of carefully selecting and following the pH to control the morphology of ZnO NWs as well as to achieve their thermally activated extrinsic doping, as required for many nanoscale engineering devices.

Isotope Exchange Raman Spectroscopy (IERS): A Novel Technique to Probe Physicochemical Processes In Situ.

A novel in situ methodology for the direct study of mass-transport properties in oxides with spatial and unprecedented time resolution, based on Raman spectroscopy coupled to isothermal isotope exchanges, is developed. Changes in the isotope concentration, resulting in a Raman frequency shift, can be followed in real time, which is not accessible by conventional methods, enabling complementary insights for the study of ion-transport properties of electrode and electrolyte materials for advanced solid-state electrochemical devices. The proof of concept and strengths of isotope exchange Raman spectroscopy (IERS) is demonstrated by studying the oxygen isotope back-exchange in gadolinium-doped ceria (CGO) thin films. Resulting oxygen self-diffusion and surface exchange coefficients are compared to conventional time-of-flight secondary-ion mass spectrometry (ToF-SIMS) characterization and literature values, showing good agreement, while at the same time providing additional insight, challenging established assumptions. IERS captivates through its rapidity, simple setup, non-destructive nature, cost effectiveness, and versatile fields of application and thus can readily be integrated as new standard tool for in situ and operando characterization in many laboratories worldwide. The applicability of this method is expected to consolidate the understanding of elementary physicochemical processes and impact various emerging fields including solid oxide cells, battery research, and beyond.

Modulating the growth of chemically deposited ZnO nanowires and the formation of nitrogen- and hydrogen-related defects using pH adjustment.

ZnO nanowires (NWs) grown by chemical bath deposition (CBD) have received great interest for nanoscale engineering devices, but their formation in aqueous solution containing many impurities needs to be carefully addressed. In particular, the pH of the CBD solution and its effect on the formation mechanisms of ZnO NWs and of nitrogen- and hydrogen-related defects in their center are still unexplored. By adjusting its value in a low- and high-pH region, we show the latent evolution of the morphological and optical properties of ZnO NWs, as well as the modulated incorporation of nitrogen- and hydrogen-related defects in their center using Raman and cathodoluminescence spectroscopy. The increase in pH is related to the increase in the oxygen chemical potential (µ O), for which the formation energy of hydrogen in bond-centered sites (HBC) and VZn-NO-H defect complexes is found to be unchanged, whereas the formation energy of zinc vacancy (VZn) and zinc vacancy-hydrogen (VZn-nH) complexes steadily decreases as shown from density-functional theory calculations. Revealing that these VZn-related defects are energetically favorable to form as µ O is increased, ZnO NWs grown in the high-pH region are found to exhibit a higher density of VZn-nH defect complexes than ZnO NWs grown in the low-pH region. Annealing at 450 °C under an oxygen atmosphere helps tuning the optical properties of ZnO NWs by reducing the density of HBC and VZn-related defects, while activating the formation of VZn-NO-H defect complexes. These findings show the influence of pH on the nature of Zn(ii) species, the electrostatic interactions between these species and ZnO NW surfaces, and the formation energy of the involved defects. They emphasize the crucial role of the pH of the CBD solution and open new possibilities for simultaneously engineering the morphology of ZnO NWs and the formation of nitrogen- and hydrogen-related defects.

Optimization of the Sb2S3 Shell Thickness in ZnO Nanowire-Based Extremely Thin Absorber Solar Cells.

Extremely thin absorber (ETA) solar cells made of ZnO/TiO2/Sb2S3 core-shell nanowire heterostructures, using P3HT as the hole-transporting material (HTM), are of high interest to surpass solar cell efficiencies of their planar counterpart at lower material cost. However, no dimensional optimization has been addressed in detail, as it raises material and technological critical issues. In this study, the thickness of the Sb2S3 shell grown by chemical spray pyrolysis is tuned from a couple of nanometers to several tens of nanometers, while switching from a partially to a fully crystallized shell. The Sb2S3 shell is highly pure, and the unwanted Sb2O3 phase was not formed. The low end of the thickness is limited by challenges in the crystallization of the Sb2S3 shell, as it is amorphous at nanoscale dimensions, resulting in the low optical absorption of visible photons. In contrast, the high end of the thickness is limited by the increased density of defects in the bulk of the Sb2S3 shell, degrading charge carrier dynamics, and by the incomplete immersion of the P3HT in the structure, resulting in the poor hole collection. The best ETA solar cell with a short-circuit current density of 12.1 mA/cm2, an open-circuit voltage of 502 mV, and a photovoltaic conversion efficiency of 2.83% is obtained for an intermediate thickness of the Sb2S3 shell. These findings highlight that the incorporation of both the absorber shell and HTM in the core-shell heterostructures relies on the spacing between individual nanowires. They further elaborate the intricate nature of the dimensional optimization of an ETA cell, as it requires a fine-balanced holistic approach to correlate all the dimensions of all the components in the heterostructures.

Elementary processes governing V2AlC chemical etching in HF.

The literature on MXenes, an important class of 2D materials discovered in 2011, is now abundant. Yet, the lack of well-defined structures, with definite crystal orientations, has so far hindered our capability to identify some key aspects ruling MXene's chemical exfoliation from their parent MAX phase. Herein the chemical exfoliation of V2AlC is studied by using well-defined square pillars with lateral sizes from 7 µm up to 500 µm, processed from centimeter-sized V2AlC single crystals. The MXene conversion kinetics are assessed with µm spatial resolution by combining Raman spectroscopy with scanning electron and optical microscopies. HF penetration, and the loss of the Al species, take place through the edges. At room temperature, and on a reasonable time scale, no etching can takes place by HF penetration through the basal planes, viz. normal to the basal planes. In defect-free pillars, etching through the edges is isotropic. Initially the etching rate is linear with a rate of 2.2 ± 0.3 µm h-1 at 25 °C. At a distance of ≈45 µm, the etching rate is greatly diminished.

Surface Restructuring of Thin-Film Electrodes Based on Thermal History and Its Significance for the Catalytic Activity and Stability at the Gas/Solid and Solid/Solid Interfaces.

Electrodes in solid-state energy devices are subjected to a variety of thermal treatments, from film processing to device operation at high temperatures. All these treatments influence the chemical activity and stability of the films, as the thermally induced chemical restructuring shapes the microstructure and the morphology. Here, we investigate the correlation between the oxygen reduction reaction (ORR) activity and thermal history in complex transition metal oxides, in particular, La0.6Sr0.4CoO3-δ (LSC64) thin films deposited by pulsed laser deposition. To this end, three ∼200 nm thick LSC64 films with different processing and thermal histories were studied. A variety of surface-sensitive elemental characterization techniques (i.e., low-energy ion scattering, X-ray photoelectron spectroscopy, and secondary ion mass spectrometry) were employed to thoroughly investigate the cationic distribution from the outermost surface to the film/substrate interface. Moreover, electrochemical impedance spectroscopy was used to study the activity and the stability of the films. Our investigations revealed that, despite the initial comparable ORR activity at 600 °C, the degradation rates of the films differed by twofold in the long-term stability tests at 500 °C. Here, we emphasize the importance of processing and thermal history in the elemental surface distribution, especially for the stability of LSC64 electrodes and propose that they should be considered as among the main pillars in the design of active surfaces.

Morphology Transition of ZnO from Thin Film to Nanowires on Silicon and its Correlated Enhanced Zinc Polarity Uniformity and Piezoelectric Responses.

ZnO thin films and nanostructures have received increasing interest in the field of piezoelectricity over the last decade, but their formation mechanisms on silicon when using pulsed-liquid injection metal-organic chemical vapor deposition (PLI-MOCVD) are still open to a large extent. Also, the effects of their morphology, dimensions, polarity, and electrical properties on their piezoelectric properties have not been completely decoupled yet. By only tuning the growth temperature from 400 to 750 °C while fixing the other growth conditions, the morphology transition of ZnO deposits on silicon from stacked thin films to nanowires through columnar thin films is shown. A detailed analysis of their formation mechanisms is further provided. The present transition is associated with strong enhancement of their crystallinity and growth texture along the c-axis together with a massive relaxation of the strain in nanowires. It is also related to a prevailed zinc polarity, for which its uniformity is strongly improved in nanowires. The nucleation of basal-plane stacking faults of I1-type in nanowires is also revealed and related to an emission line at about 3.326 eV in cathodoluminescence spectra, further exhibiting fairly low phonon coupling. Interestingly, the transition is additionally associated with a significant improvement of the piezoelectric amplitude, as determined by piezoresponse force microscopy measurements. The Zn-polar domains exhibit a larger piezoelectric amplitude than the O-polar domains, showing the importance of controlling the polarity in these deposits as a prerequisite to enhance the performances of piezoelectric devices. The present findings demonstrate the high potential in using the PLI-MOCVD system to form ZnO with different morphologies and polarity uniformity on silicon. They further reveal unambiguously the superiority of nanowires over thin films for piezoelectric devices.

Integration of LaMnO3+δ films on platinized silicon substrates for resistive switching applications by PI-MOCVD.

The next generation of electronic devices requires faster operation velocity, higher storage capacity and reduction of the power consumption. In this context, resistive switching memory chips emerge as promising candidates for developing new non-volatile memory modules. Manganites have received increasing interest as memristive material as they exhibit a remarkable switching response. Nevertheless, their integration in CMOS-compatible substrates, such as silicon wafers, requires further effort. Here the integration of LaMnO3+δ as memristive material in a metal-insulator-metal structure is presented using a silicon-based substrate and the pulsed injection metal organic chemical vapour deposition technique. We have developed three different growth strategies with which we are able to tune the oxygen content and Mn oxidation state moving from an orthorhombic to a rhombohedral structure for the active LaMnO3+δ material. Furthermore, a good resistive switching response has been obtained for LaMnO3+δ-based devices fabricated using optimized growth strategies.

Effects of Polyethylenimine and Its Molecular Weight on the Chemical Bath Deposition of ZnO Nanowires.

The addition of polyethylenimine (PEI) in the standard chemical bath deposition (CBD) of ZnO nanowires has received an increasing interest for monitoring their aspect ratio, but the physicochemical processes at work are still under debate. To address this issue, the effects of PEI are disentangled from the effects of ammonia and investigated over a broad range of molecular weight (i.e., chain length) and concentration, varying from 1300 to 750 000 and from 1.5 to 10 mM, respectively. It is shown that the addition of PEI strongly favors the elongation of ZnO nanowires by suppressing the homogeneous growth at the benefit of the heterogeneous growth as well as by changing the supersaturation level through a pH modification. PEI is further found to inhibit the development of the sidewalls of ZnO nanowires by adsorbing on their nonpolar m-planes, as supported by Raman scattering analysis. The inhibition proceeds even in the low pH range, which somehow rules out the present involvement of electrostatic interactions as the dominant mechanism for the adsorption. Furthermore, it is revealed that PEI drastically affects the nucleation process of ZnO nanowires on the polycrystalline ZnO seed layer by presumably adsorbing on the nanoparticles oriented with the m-planes parallel to the surface, reducing in turn their nucleation rate as well as inducing a significant vertical misalignment. These findings, specifically showing the effects of the PEI molecular weight and concentration, cast light onto its multiple roles in the CBD of ZnO nanowires.

Raman spectroscopy and X-ray diffraction studies of stress effects in PbTiO3 thin films.

A systematic study of domain structure and residual stress evolution with film thickness and of phase transition in c/a epitaxial PbTiO(3)/LaAlO(3) films using X-ray diffraction and Raman spectroscopy is reported. Both techniques revealed that the films are under tensile residual stress in the film plane and that a-domains are more stressed than c-domains. The two components of the large A(1)(TO) Ramanmodes are associated with a- and c-domains and their intensity ratio correlates to the volume fraction of a-domains. The evolution of the Raman signature with temperature revealed that the spectrum of a-domains disappears around 480 degrees C, whereas c-domains present an anomaly in their spectrum at 500 degrees C but maintain a well-defined Raman signature up to 600 degrees C.

Physical properties of annealed ZnO nanowire/CuSCN heterojunctions for self-powered UV photodetectors.

The low-cost fabrication of ZnO nanowire/CuSCN heterojunctions is demonstrated by combining chemical bath deposition with impregnation techniques. The ZnO nanowire arrays are completely filled by the CuSCN layer from their bottoms to their tops. The CuSCN layer is formed of columnar grains that are strongly oriented along the [003] direction owing to the polymeric form of the ß-rhombohedral crystalline phase. Importantly, an annealing step is found essential in a fairly narrow range of low temperatures, not only for outgassing the solvent from the CuSCN layer, but also for reducing the density of interfacial defects. The resulting electrical properties of annealed ZnO nanowire/CuSCN heterojunctions are strongly improved: a maximum rectification ratio of 2644 at ±2 V is achieved following annealing at 150 °C under air atmosphere, which is related to a strong decrease in the reverse current density. Interestingly, the corresponding self-powered UV photodetectors exhibit a responsivity of 0.02 A/W at zero bias and at 370 nm with a UV-to-visible (370-500 nm) rejection ratio of 100 under an irradiance of 100 mW/cm(2). The UV selectivity at 370 nm can also be readily modulated by tuning the length of ZnO nanowires. Eventually, a significant photovoltaic effect is revealed for this type of heterojunctions, leading to an open circuit voltage of 37 mV and a short circuit current density of 51 µA/cm(2), which may be useful for the self-powering of the complete device. These findings show the underlying physical mechanisms at work in ZnO nanowire/CuSCN heterojunctions and reveal their high potential as self-powered UV photodetectors.