RESUMEN
Triple negative breast cancer is difficult to treat effectively, due to its aggressiveness, drug resistance, and lack of the receptors required for hormonal therapy, particularly at the metastatic stage. Here, we report the development and evaluation of a multifunctional nanoparticle formulation containing an iron oxide core that can deliver doxorubicin, a cytotoxic agent, and polyinosinic:polycytidylic acid (Poly IC), a TLR3 agonist, in a targeted and simultaneous fashion to both breast cancer and dendritic cells. Endoglin-binding peptide (EBP) is used to target both TNBC cells and vasculature epithelia. The nanoparticle demonstrates favorable physicochemical properties and a tumor-specific targeting profile. The nanoparticle induces tumor apoptosis through multiple mechanisms including direct tumor cell killing, dendritic cell-initiated innate and T cell-mediated adaptive immune responses. The nanoparticle markedly inhibits tumor growth and metastasis and substantially extends survival in an aggressive and drug-resistant metastatic mouse model of triple negative breast cancer (TNBC). This study points to a promising platform that may substantially improve the therapeutic efficacy for treating metastatic TNBC.
RESUMEN
Prolonged osteochondral tissue damage can result in osteoarthritis and decreased quality of life. Multiphasic scaffolds, where different layers model different microenvironments, are a promising treatment approach, yet stable joining between layers during fabrication remains challenging. Here, a bilayer scaffold for osteochondral tissue regeneration was fabricated using thermally-induced phase separation (TIPS). Two distinct polymer solutions were layered before TIPS, and the resulting porous, bilayer scaffold was characterized by seamless interfacial integration and a mechanical stiffness gradient reflecting the native osteochondral microenvironment. Chitosan is a critical component of both scaffold layers to facilitate cell attachment and the formation of polyelectrolyte complexes with other biologically relevant natural polymers. The articular cartilage region was optimized for hyaluronic acid content and stiffness, while the subchondral bone region was defined by higher stiffness and osteoconductive hydroxyapatite content. Following co-culture with chondrocyte-like (SW-1353 or mesenchymal stem cells) and osteoblast-like cells (MG63), cell proliferation and migration to the interface along with increased gene expression associated with relevant markers of osteogenesis and chondrogenesis indicates the potential of this bilayer scaffold for osteochondral tissue regeneration.
Asunto(s)
Huesos/fisiología , Cartílago Articular/fisiología , Quitosano/química , Quitosano/farmacología , Regeneración/efectos de los fármacos , Andamios del Tejido/química , Alginatos/química , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Huesos/citología , Huesos/efectos de los fármacos , Cartílago Articular/citología , Cartílago Articular/efectos de los fármacos , Adhesión Celular/efectos de los fármacos , Línea Celular , Proliferación Celular/efectos de los fármacos , Durapatita/química , Humanos , Fenómenos Mecánicos , Ingeniería de TejidosRESUMEN
Applications of hydrophobic drug-based nanocarriers (NCs) remain largely limited because of their low loading capacity. Here, development of a multifunctional hybrid NC made of a magnetic Fe3O4 core and a mesoporous silica shell embedded with carbon dots (CDs) and paclitaxel (PTX), and covered by another layer of silica is reported. The NC is prepared via a one-pot process under mild condition. The PTX loading method introduced in this study simplifies drug loading process and demonstrates a high loading capacity due to mesoporous silica dual-shell structure, supramolecular π-stacking between conjugated rings of PTX molecules, and aromatic rings of the CDs in the hybrid NC. The CDs serve as both confocal and two-photon fluorescence imaging probes, while the Fe3O4 core serves as a magnetic resonance imaging contrast agent. Significantly, NC releases PTX in response to near infrared irradiation as a result of local heating of the embedded CDs and the heating of CDs also provides an additional therapeutic effect by thermally killing cancer cells in tumor in addition to the chemotherapeutic effect of released PTX. Both in vitro and in vivo results show that NC demonstrates high therapeutic efficacy through a synergistic effect from the combined chemo-photothermal treatments.
Asunto(s)
Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos/métodos , Imagen Multimodal/métodos , Animales , Antineoplásicos/química , Línea Celular Tumoral , Doxorrubicina/química , Liberación de Fármacos , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , RatonesRESUMEN
The maintenance and expansion of human neural stem cells (hNSCs) in 3D tissue scaffolds is a promising strategy in producing cost-effective hNSCs with quality and quantity applicable for clinical applications. A few biopolymers have been extensively used to fabricate 3D scaffolds, including hyaluronic acid, collagen, alginate, and chitosan, due to their bioactive nature and availability. However, these polymers are usually applied in combination with other biomolecules, leading to their responses difficult to ascribe to. Here, scaffolds made of chitosan, alginate, hyaluronic acid, or collagen, are explored for hNSC expansion under xeno-free and chemically defined conditions and compared for hNSC multipotency maintenance. This study shows that the scaffolds made of pure chitosan support the highest adhesion and growth of hNSCs, yielding the most viable cells with NSC marker protein expression. In contrast, the presence of alginate, hyaluronic acid, or collagen induces differentiation toward immature neurons and astrocytes even in the maintenance medium and absence of differentiation factors. The cells in pure chitosan scaffolds preserve the level of transmembrane protein profile similar to that of standard culture. These findings point to the potential of using pure chitosan scaffolds as a base scaffolding material for hNSC expansion in 3D.
RESUMEN
Human neural stem cells (hNSCs) possess remarkable potential for regenerative medicine in the treatment of presently incurable diseases. However, a key challenge lies in producing sufficient quantities of hNSCs, which is necessary for effective treatment. Dynamic culture systems are recognized as a powerful approach to producing large quantities of hNSCs required, where microcarriers play a critical role in supporting cell expansion. Nevertheless, the currently available microcarriers have limitations, including a lack of appropriate surface chemistry to promote cell adhesion, inadequate mechanical properties to protect cells from dynamic forces, and poor suitability for mass production. Here, we present the development of three-dimensional (3D) chitosan scaffolds as microcarriers for hNSC expansion under defined conditions in bioreactors. We demonstrate that chitosan scaffolds with a concentration of 4 wt% (4CS scaffolds) exhibit desirable microstructural characteristics and mechanical properties suited for hNSC expansion. Furthermore, they could also withstand degradation in dynamic conditions. The 4CS scaffold condition yields optimal metabolic activity, cell adhesion, and protein expression, enabling sustained hNSC expansion for up to three weeks in a dynamic culture. Our study introduces an effective microcarrier approach for prolonged expansion of hNSCs, which has the potential for mass production in a three-dimensional setting.
RESUMEN
Stem cell therapy and research for neural diseases depends on reliable reproduction of neural stem cells. Chitosan-based materials have been proposed as a substrate for culturing human neural stem cells (hNSCs) in the pursuit of clinically compatible culture conditions that are chemically defined and compliant with good manufacturing practices. The physical and biochemical properties of chitosan and chitin are strongly regulated by the degree of deacetylation (DD). However, the effect of DD on hNSC behavior has not been systematically investigated. In this study, films with DD ranging from 93% to 14% are fabricated with chitosan and chitin. Under xeno-free conditions, hNSCs proliferate preferentially on films with a higher DD, exhibiting adherent morphology and retaining multipotency. Lowering the DD leads to formation of neural stem cell spheroids due to unsteady adhesion. The neural spheroids present NSC multipotency protein expression reduction and cytoplasmic translocation. This study provides an insight into the influence of the DD on hNSCs behavior and may serve as a guideline for hNSC research using chitosan-based biomaterials. It demonstrates the capability of controlling hNSC fate by simply tailoring the DD of chitosan.
Asunto(s)
Quitosano , Células-Madre Neurales , Humanos , Quitosano/farmacología , Quitosano/química , Quitina/farmacología , Quitina/química , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/químicaRESUMEN
It is considered a significant challenge to construct nanocarriers that have high drug loading capacity and can overcome physiological barriers to deliver efficacious amounts of drugs to solid tumors. Here, the development of a safe, biconcave carbon nanodisk to address this challenge for treating breast cancer is reported. The nanodisk demonstrates fluorescent imaging capability, an exceedingly high loading capacity (947.8 mg g-1 , 94.78 wt%) for doxorubicin (DOX), and pH-responsive drug release. It exhibits a higher uptake rate by tumor cells and greater accumulation in tumors in a mouse model than its carbon nanosphere counterpart. In addition, the nanodisk absorbs and transforms near-infrared (NIR) light to heat, which enables simultaneous NIR-responsive drug release for chemotherapy and generation of thermal energy for tumor cell destruction. Notably, this NIR-activated dual therapy demonstrates a near complete suppression of tumor growth in a mouse model of triple-negative breast cancer when DOX-loaded nanodisks are administered systemically.
Asunto(s)
Carbono/química , Sistemas de Liberación de Medicamentos/métodos , Hipertermia Inducida/métodos , Nanoestructuras/química , Fotoquimioterapia/métodos , Animales , Antibióticos Antineoplásicos/química , Antibióticos Antineoplásicos/farmacocinética , Antibióticos Antineoplásicos/farmacología , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Terapia Combinada , Doxorrubicina/química , Doxorrubicina/farmacocinética , Doxorrubicina/farmacología , Femenino , Rayos Infrarrojos , Ratones , Ratones Endogámicos BALB C , Nanoestructuras/efectos de la radiación , Nanoestructuras/ultraestructura , Distribución TisularRESUMEN
Two-dimensional monolayer cell cultures are routinely utilized for preclinical cancer drug screening, but the results often do not translate well when drugs are tested in vivo. To address this limitation, a biocompatible chitosan-PEG hydrogel (CSPG gel) was synthesized to create a gel that can be easily dispensed into 96-well plates at room temperature and neutral pH. The stiffness of this gel was tailored to be within the stiffness range of human glioblastoma tissue to promote the formation of tumor spheroids. Differences in cell morphology, proliferation rate, and dose-dependent drug cytotoxicity were compared among cell spheroids grown on CSPG gels, cells in monolayer culture on tissue culture polystyrene and cells cultured on Matrigel. Tumor spheroids on CSPG gels displayed statistically significantly greater resistance to chemotherapeutics than in the conditions where cells did not form spheroids. Gene expression analysis suggests that resistance of cells on CSPG gels to the therapy may be partially attributed to upregulation of ATP-binding cassette transporters and downregulation of DNA mismatch repair genes, which was stimulated by spheroid formation. These findings suggest CSPG gel generates tumor spheroids that better reflect the malignant behavior of GBM and provides a cost-effective substrate for preclinical, high-throughput screening of potential cancer therapeutics.
RESUMEN
The invasive and recurrent nature of glioblastoma multiforme (GBM) is linked to a small subpopulation of cancer cells, which are self-renewing, resistant to standard treatment regimens, and induce formation of new tumors. Matrix stiffness is implicated in the regulation of cell proliferation, drug resistance, and reversion to a more invasive phenotype. Therefore, understanding the relationship between matrix stiffness and tumor cell behavior is vital to develop appropriate in vitro tumor models. Here, chitosan-hyaluronic acid (CHA) polyelectrolyte complex scaffolds are fabricated with statistically significant stiffness variances to characterize the effect of scaffold stiffness on morphology, proliferation, drug resistance, and gene expression in human glioblastoma cells (U-87 MG). All scaffolds support GBM proliferation over a 12-day culture period, yet larger spheroids are observed in scaffolds with higher stiffness. Additionally, GBM cells cultured in stiffer CHA scaffolds prove significantly more resistant to the common chemotherapeutic temozolomide. Moreover, the stiffer 8% CHA scaffolds exhibit an increase in expression of drug resistance and invasion related genes compared to 2D culture. CHA scaffolds present a tunable microenvironment for enhanced tumor cell malignancy and may provide a valuable in vitro microenvironment for studying tumor progression and screening anticancer therapies.
Asunto(s)
Antineoplásicos/química , Antineoplásicos/farmacología , Quitosano/química , Glioblastoma/metabolismo , Ácido Hialurónico/química , Temozolomida/química , Temozolomida/farmacología , Andamios del Tejido/química , Neoplasias Encefálicas/metabolismo , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Humanos , Microambiente Tumoral/efectos de los fármacosRESUMEN
Dermal wounds, both acute and chronic, represent a significant clinical challenge and therefore the development of novel biomaterial-based skin substitutes to promote skin repair is essential. Nanofibers have garnered attention as materials to promote skin regeneration due to the similarities in morphology and dimensionality between nanofibers and native extracellular matrix proteins, which are critical in guiding cutaneous wound healing. Electrospun chitosan-poly(caprolactone) (CPCL) nanofiber scaffolds, which combine the important intrinsic biological properties of chitosan and the mechanical integrity and stability of PCL, were evaluated as skin tissue engineering scaffolds using a mouse cutaneous excisional skin defect model. Gross assessment of wound size and measurement of defect recovery over time as well as histological evaluation of wound healing showed that CPCL nanofiber scaffolds increased wound healing rate and promoted more complete wound closure as compared with Tegaderm, a commercially available occlusive dressing. CPCL nanofiber scaffolds represent a biomimetic approach to skin repair by serving as an immediately available provisional matrix to promote wound closure. These nanofiber scaffolds may have significant potential as a skin substitute or as the basis for more complex skin tissue engineering constructs involving integration with biologics.
RESUMEN
Mechanical properties of the extracellular matrix have a profound effect on the behavior of anchorage-dependent cells. However, the mechanisms that define the effects of matrix stiffness on cell behavior remains unclear. Therefore, the development and fabrication of synthetic matrices with well-defined stiffness is invaluable for studying the interactions of cells with their biophysical microenvironment in vitro. We demonstrate a methoxypolyethylene glycol (mPEG)-modified chitosan hydrogel network where hydrogel stiffness can be easily modulated under physiological conditions by adjusting the degree of mPEG grafting onto chitosan (PEGylation). We show that the storage modulus of the hydrogel increases as PEGylation decreases and the gels exhibit instant self-recovery after deformation. Breast cancer cells cultured on the stiffest hydrogels adopt a more malignant phenotype with increased resistance to doxorubicin as compared with cells cultured on tissue culture polystyrene or Matrigel. This work demonstrates the utility of mPEG-modified chitosan hydrogel, with tunable mechanical properties, as an improved replacement of conventional culture system for in vitro characterization of breast cancer cell phenotype and evaluation of cancer therapies.
RESUMEN
The inability to produce large quantities of nanofibers has been a primary obstacle in advancement and commercialization of electrospinning technologies, especially when aligned nanofibers are desired. Here, we present a high-throughput centrifugal electrospinning (HTP-CES) system capable of producing a large number of highly-aligned nanofiber samples with high-yield and tunable diameters. The versatility of the design was revealed when bead-less nanofibers were produced from copolymer chitosan/polycaprolactone (C-PCL) solutions despite variations in polymer blend composition or spinneret needle gauge. Compared to conventional electrospinning techniques, fibers spun with the HTP-CES not only exhibited superior alignment, but also better diameter uniformity. Nanofiber alignment was quantified using Fast Fourier Transform (FFT) analysis. In addition, a concave correlation between the needle diameter and resultant fiber diameter was identified. This system can be easily scaled up for industrial production of highly-aligned nanofibers with tunable diameters that can potentially meet the requirements for various engineering and biomedical applications.
Asunto(s)
Quitosano/química , Electricidad , Nanofibras/química , Nanotecnología/métodos , Centrifugación , Nanotecnología/instrumentación , AgujasRESUMEN
Iron and copper complexes of tetraphenyl-m-benziporphyrin (TPmBPH)H have been prepared and structurally characterized. The iron system, (TPmBPH)Fe(II)Br, contains a high-spin Fe(II) center. In the solid state the complex forms dimeric units linked by weak CH.Br hydrogen bonds. The Cu complex contains a tetrameric copper cluster with a Cu(2)Cl(4)(2)(-) unit bridging two [(TPmBPCl)Cu(II)](+) fragments. The formation of (TPmBPCl)H represents an example of copper-catalyzed chlorination on the internal carbon atom of (TPmBPH)H.