Comparison of the physical, thermal, and biological effects on implant bone site when using either zirconia or stainless-steel drill for implant bone site preparation.

BACKGROUND/PURPOSE: Zirconia has been a popular material in dental implantology with good biocompatibility. But few research focused on its application in implant drills. This study aimed to investigate the physical, thermal, and biological effects on using the zirconia and stainless-steel drills for implant bone site preparation. METHODS: We performed a series of experiments to evaluate the physical wearing properties of zirconia and stainless-steel drills of identical diameter and similar shape. During the implant site preparation thermal test, we subjected both drills onto a resin-embedded bone, utilizing a thermal couple device without irrigation. Moreover, we conducted a cell study by collecting bone cells in vivo while preparing the implant site with both tested drills. The cell activity was evaluated through cell proliferation colorimetric analysis (XTT) and alkaline phosphatase (ALP) activity measurements. RESULTS: The zirconia drill outperforms the stainless-steel drill in terms of requiring less force, maintaining stability over repeated cutting tests, and generating lower temperatures during drilling (stainless-steel drill: 45.48 ± 1.31 °C; zirconia-coated drill: 32.98 ± 1.21 °C, P = 0.000247). Meanwhile, both types of drills show similar results in XTT colorimetric analysis and ALP activity test. CONCLUSION: The thermal effect study is more favorable for using the zirconia drill than the stainless-steel drill for bone preparation. Cytological analysis indicate that the zirconia drill produces a similar impact on bone cells activity as the stainless-steel drill. Therefore, we conclude that the zirconia drills offer a good cutting effect similar to currently available stainless-steel drills in various aspects.

Efficacy of polyacrylate silver salt/polyvinylpyrrolidone-based liquid oral gel in management of concurrence chemoradiotherapy-induced oral mucositis.

BACKGROUND/PURPOSE: Acute oral mucositis (OM) is a painful complication of concurrent chemoradiotherapy (CCRT). This severe adverse symptom may impact on patient's quality of life, lead to malnutrition. Thus, finding more effective methods in OM management is very important. The purpose of this study is to evaluate the efficacy of polyacrylate silver salt/Polyvinylpyrrolidone-based liquid oral gel (named as polyacrylate silver salt oral gel) in improving the symptomatic relief of CCRT-induced oral mucositis and oral dysfunction in neck and head cancer patients. METHODS: In this study, 24 oral cancer patients underwent CCRT and having OM grade 2 or higher were randomly assigned into the test group and the control group. Both groups followed Multinational Association of Supportive Care in Cancer and International Society of Oral Oncology (MASCC/ISOO) clinical practice guidelines for the management of mucositis, but adding rinsing with 15 g oral gel right after oral hygiene treaded the test group. Clinical OM and oral function were assessed weekly for 4 consecutive weeks till 5-10 days after the completion of radiotherapy. For evaluation, Common Terminology Criteria for Adverse Events (CTCAE) v3.0 was used for collecting the data of OM grade. RESULTS: The results showed that polyacrylate silver salt oral gel had better effect for relieving the oral mucositis. There were statistically significant differences in OM grades (1.59 vs. 2.8, p < 0.0001) between the test group and the control group. CONCLUSION: Our clinical studies demonstrated that polyacrylate silver salt oral gel is an effective interventional option in terms of rapid mucositis healing.

Prognosis of medication-related osteonecrosis of the jaws in metastatic prostate cancer patients.

OBJECTIVES: The aim of this study was to find out the prognosis of medication-related osteonecrosis of the jaws (MRONJ) in prostate cancer patients who received two different types of antiresorptive agents for bone metastasis. MATERIALS AND METHODS: We retrospectively surveyed a cohort of 95 metastatic prostate cancer patients with 122 MRONJ lesions treated in a single medical center. Treatment outcomes and prognostic factors were investigated. The cumulative complete response rate was calculated with the Kaplan-Meier method, and significance was examined with the log-rank and Breslow tests. Cox regression was used for the univariate and multivariate analyses of prognostic factors. RESULTS: The cumulative complete response rate of all patients at 12 months was 37.8%, and that of patients treated with zoledronic acid and denosumab was 22.9% and 70.5%, respectively. Denosumab, pretreatment C-terminal telopeptide of collagen I (CTX) level > 150 pg/ml, and anemia were identified as independent prognostic factors in a multivariate analysis with adjusted hazard ratios of 3.18 (95% confidence interval [CI], 1.24-8.11), 3.24 (95% CI, 1.39-7.53), and 0.42 (95% CI, 0.19-0.93), respectively. CONCLUSION: A higher pretreatment level of CTX, using denosumab as the antiresorptive agent and without anemia, indicates a better treatment outcome of MRONJ in prostate cancer patients.

Resolution of Excessive Interocclusal Restoration Space Post-Mandibulectomy Using a Two-Layer Retrievable Fixed Implant-Supported Prosthesis: A Case Report.

Patients treated with segmental mandibulectomy often require complicated rehabilitation. Maintenance of mandibular continuity and provision of adequate soft and hard tissue volumes are two key factors required for good clinical outcomes. Moreover, excessive interocclusal restoration space is a common problem in these patients. This case report describes the process of prosthetic rehabilitation from extensive surgical excision to final rehabilitation by using a creative two-layer fixed implant prosthesis in a 70-year-old patient with oral squamous cell carcinoma.

Effects of low-dose rhBMP-2 on peri-implant ridge augmentation in a canine model.

AIMS: The aim of this study was to investigate the potential of low-dose rhBMP-2 combined with Hydroxyapatite (HAp)/ß-tricalcium phosphate (TCP)/ Collagen (Col) composite in repairing the peri-implant critical size defect and to determine the optimal rhBMP-2 concentration. MATERIALS AND METHODS: Fifty saddle-type alveolar defects (10 mm mesiodistally and 4 mm apicocoronally) were surgically prepared on edentulous ridges in ten beagle dogs. Following implant placement, the defects with vertically exposed implant fixtures either received (a) no graft, (b) HAp/TCP/Col composite, (c) HAp/TCP/Col +0.02 mg/ml rhBMP-2, (d) HAp/TCP/Col +0.08 mg/ml rhBMP-2 or (e) HAp/TCP/Col +0.2 mg/ml rhBMP-2. After healing for 4 or 8 weeks, bone regeneration and mineralization were assessed through radiography, micro-CT, fluorescence labelling and histologic analyses. Implant stability was measured through resonance frequency analysis. RESULTS: It was evident HAp/TCP/Col with 0.2 mg/ml rhBMP-2 manifested strong osteogenic potential in this large animal model, as significantly more and faster new bone formation with better implant stability was identified compared to the HAp/TCP/Col-alone control group (adjusted p < .05). CONCLUSIONS: Our results highlight the constructs of HAp/TCP/Col +0.2 mg/ml rhBMP-2 without barrier membranes as a promising tool for peri-implant ridge augmentation.

Preliminary evaluation of BMP-2-derived peptide in repairing a peri-implant critical size defect: A canine model.

BACKGROUND/PURPOSE: A synthetic bone morphogenetic protein (BMP)-2-derived peptide has been discovered to promote bone regeneration. The present study investigated the potential of the BMP-2 peptide combined with hydroxyapatite (HAp)/ß-tricalcium phosphate (TCP)/collagen (Col) composite in repairing a peri-implant critical size defect. METHODS: Twenty-four saddle-type alveolar defects (10 mm mesiodistally and 4 mm apicocoronally) were surgically prepared in edentulous ridges in four male beagle dogs. Following implant placement, the defects with vertically exposed implant fixtures received (a) HAp/TCP/Col composite, (b) HAp/TCP/Col + 4 mg/mL BMP-2 peptide, (c) HAp/TCP/Col + 20 mg/mL BMP-2 peptide, or (d) HAp/TCP/Col + 0.2 mg/mL recombinant human BMP-2 (rhBMP-2). Bone regeneration and mineralization were assessed using radiography, micro-computed tomography (micro-CT), fluorescence labeling, and histologic analyses after healing for 4 or 8 weeks. Implant stability was measured using resonance frequency analysis. RESULTS: The 20 mg/mL BMP-2 peptide groups demonstrated a distinguishable advantage in bone regeneration potential over the control groups, as observed on radiographic imaging and histologic examination, although no significant difference was found in implant stability and histomorphometric analysis of mineralization levels. However, the performance of the 20 mg/mL BMP-2 peptide groups were inferior to that of the 0.2 mg/mL rhBMP-2 groups. CONCLUSION: The BMP-2 peptide may accelerate peri-implant bone regeneration. The BMP-2 peptide at 20 mg/mL still cannot complete bone repair of peri-implant critical size defect. The BMP-2 peptide at 20 mg/mL has similar osteoinductive performance to the rhBMP-2 at 0.02 mg/mL.

Comparing image qualities of dental cone-beam computed tomography with different scanning parameters for detecting root canals.

BACKGROUND/PURPOSE: Cone-beam computed tomography (CBCT) is a useful device in creating 3-dimensional images in the examining area of dentistry and is one of the most common clinical methods in detecting second mesiobuccal (MB2) canals in maxillary molars. The aim of this in vitro study was to compare the image quality of the small field of view (FOV) CBCT with different rotation arcs and scanning speeds in the use of detecting root canals. METHODS: A dentate human skull was scanned in Morita 3D Accuitomo 170 with 4 × 4 cm FOV under 5 mA and 90 kVp. Two different rotation arcs (360° and 180°) and three different scanning modes (slow-speed mode, standard mode and high-speed mode) combined into six different groups. Five different levels of axial sections were selected from each group. Five endodontic specialists rated the image quality by focusing on the sharpness of the MB2 canal of the upper right first molar and the surrounding structures. RESULTS: Despite the rotation arcs, all the observers gave excellent ratings to images taken with slow-speed mode. The high-speed mode taken with 360° and 180° got the second lowest and the lowest ratings, respectively. Under the same scanning speed, the rotation arc did not have a significant difference in image quality. CONCLUSION: Slow-speed mode is inevitable in maintaining adequate image quality during taking CBCT. However, endodontists can use the half rotation mode to significantly reduce radiation dose, exposure time, and still maintain sufficient image quality for root canal anatomy assessment.

Prognosis of medication-related osteonecrosis of the jaws in cancer patients using antiresorptive agent zoledronic acid.

BACKGROUND/PURPOSE: Anti-resorptive agents are commonly used in cancer patients with bone metastasis or multiple myeloma (MM). An adverse event termed medication-related osteonecrosis of the jaws (MRONJ) was discovered in patients using these agents but relatively little attention has been paid to its prognosis. Our aims were to find out the treatment outcomes and prognostic indicators of MRONJ in cancer patients who received zoledronic acid as antiresorptive therapy. METHODS: We retrospectively surveyed a cohort of 133 cancer patients who received zoledronic acid. A total of 150 MRONJ lesions were included for investigation. Cumulative complete response rate after treatment was calculated with the Kaplan-Meier method, and significance was examined with the log-rank tests. Cox regression was used for univariate and multivariate analyses of prognostic factors. RESULTS: The cumulative complete response rate of all patients at 24 months was 53.2%, and those of patients with MM, breast cancer and prostate cancer were 27.8%, 60.7% and 68.0%, respectively. Having MM was identified as an independent prognostic factor in a multivariate analysis with adjusted hazard ratios of 0.28 (95% confidence interval, 0.09-0.83). CONCLUSION: For cancer patients with ONJ related to zoledronic acid, patients with MM endure a worse treatment outcome.

Crystal growth in dentinal tubules with bio-calcium carbonate-silica sourced from equisetum grass.

BACKGROUND/PURPOSE: One effective way to deal with dentin hypersensitivity is to develop materials to seal the tubules. The porous bio-calcium carbonate-silica (BCCS) contained well-dispersed CaCO3 would form calcium phosphates to seal the dentinal tubules when mixed with an acidic solution. The acidic hydrothermal treatment and calcination to isolate the BCCS from the agricultural waste like equisetum grass was used, which would be more environmentally friendly than chemically synthesized mesoporous biomaterials. The aim of this study was to develop mesoporous materials from natural resources to occlude the dentinal tubules which could be more environmentally-friendly. METHODS: Dentin disc samples were prepared and treated with different methods as follows: (1) BCCS mixed with H3PO4; (2) BCCS mixed with KH2PO4; (3) Seal & Protect® was used as a comparison group. Sealing efficacy was evaluated by measuring the depths and percentages of precipitate occlusion in dentinal tubules with SEM. RESULTS: The N2 adsorption-desorption isotherm of the BCCS demonstrated a pore size of around 15.0 nm and a surface area of 61 m2g-1. From the results of occlusion percentage and depth, the BCCS treated with H3PO4 or KH2PO4 demonstrated promising sealing efficacy than the commercial product. CONCLUSION: This synthetic process used the agricultural waste equisetum grass to produce bio-calcium carbonate-silica would be environmentally friendly, which has great potential in treating exposed dentin related diseases.

Strontium ion can significantly decrease enamel demineralization and prevent the enamel surface hardness loss in acidic environment.

BACKGROUND/PURPOSE: Strontium ion may play a role similar to calcium ion in enamel remineralization. The aim of this study was to investigate the effect of strontium ion concentration gradient on the demineralization of enamel. METHODS: Citric acid and sodium citrate were used to prepare 16 different experimental acidic solutions with four different pH values (2.5, 3.5, 4.5, and 5.5) and four different strontium ion concentrations (0 M, 10-4 M, 10-3 M, and 10-2 M). Forty-eight human enamel samples were divided into 16 groups (n = 3) and immersed into the 16 different acidic solutions for 3 min. The phosphorus ion concentrations in 16 different acidic solutions were measured and compared. The enamel surface hardness was measured with a Vickers hardness tester. The energy dispersive spectrometer was used to detect the strontium ion content in the enamel surface. RESULTS: Addition the strontium ions to the acidic solution could reduce the dissolution of the enamel. At pH 3.5 and pH 5.5, significantly lower phosphorus ion concentrations were detected in the acidic solutions with the addition of 10-2 M strontium ions. There was a less reduction of enamel surface hardness, while the strontium ion concentration increased in the acidic solution. At pH 2.5, the addition of 10-4 M, 10-3 M, or 10-2 M strontium ions to the acidic solution resulted in a significant increase in the strontium ion content in the enamel surface. CONCLUSION: Strontium ion can decrease the dissolution of the enamel and prevent the enamel surface hardness loss in acidic environment.

Pure type-1 collagen application to third molar extraction socket reduces postoperative pain score and duration and promotes socket bone healing.

BACKGROUND/PURPOSE: Extraction of the third molar may cause post-operative complications. This study assessed whether application of pure type-1 collagen to the third molar extraction socket can reduce post-operative pain score and duration and promote socket bone healing. METHODS: Fourteen patients who underwent 20 bilateral and symmetric third molar extractions were included in this study. After two tooth extractions at two different occasions in the same patient, one socket was filled with pure type-1 collagen (experimental group, n = 20) and the other socket received nothing but the blood clot (control group, n = 20). The post-operative pain score and duration, mouth-opening limitation, and the bone density at the socket site were assessed at weeks 1, 2, 4, and 8 after tooth extraction. RESULTS: Patients in the experimental group had a significantly lower mean post-operative pain score (2.6 ± 1.2) than patients in the control group (4.7 ± 2.0), and had a significantly shorter post-operative pain duration (2.7 ± 1.4 days) than patients in the control group (3.7 ± 1.8 days). We also observed a significantly lower frequency of mouth-opening limitation in 20 experimental-group patients (45%) than in 20 control-group patients (90%, P = 0.007). Moreover, a significantly higher mineralization ratio (10.2%) was found in the experimental socket site than in the control socket site. CONCLUSION: Application of pure type-1 collagen to the third molar extraction socket can reduce post-operative pain score and duration, decrease the frequency of mouth-opening limitation, and increase mineralization ratio at the extraction socket site.

Effect of different zinc concentrations on partially-stabilized cement for vital pulp therapy.

BACKGROUND/PURPOSE: We have developed and investigated the partially-stabilized cements (PSC) with Zn for vital pulp therapy due to their short setting time and high cell biocompatibility. However, the effect of PSC with different concentrations of Zn on setting time and biocompatibility remained unknown. Therefore, the purpose of this study was to determine the optimal concentration of Zn to be synthesized with PSC for vital pulp therapy. METHODS: PSC with different weight percentages of Zn (5%, 7%, 10%) were synthesized to attain 5%Zn-PSC, 7%Zn-PSC, and 10%Zn-PSC. The initial and final setting times were measured using the Gillmore needles method, and the compressive strength tests were conducted using a universal testing machine. The phases of Zn-PSC powders were observed using an X-ray diffractometer (XRD). Human dental pulp stem cells (hDPSCs) were used to evaluate the biocompatibility and cytotoxicity of the materials via Alamar blue and LDH assays. Mineral trioxide aggregate (MTA) was used to be compared with Zn-PSC samples. RESULTS: The initial and final setting times of PSC with different concentrations of Zn were reduced considerably compared to those of MTA. The results also indicated that the initial and final setting times decreased as the weight % of Zn increased. 5%Zn-PSC had the highest compressive strength among all tested materials. 5%Zn-PSC samples also displayed comparatively higher cell biocompatibility than 7% and 10% Zn-PSC samples. However, there was no significant difference between the 5%Zn-PSC and MTA in cell biocompatibility. In addition, the results of the LDH release assay indicated a low level of cytotoxicity among all the test samples. CONCLUSION: 5%Zn-PSC has a shorter setting time, better mechanical properties, and good biocompatibility and thus it has great potential for vital pulp therapy.

Trigeminocardiac reflex during non-surgical root canal treatment of teeth with irreversible pulpitis.

BACKGROUND/PURPOSE: Trigeminocardiac reflex (TCR) is a unique clinical incident of acute change in hemodynamic balance, which may lead to hypotension, bradycardia, and even clinical crisis. Up to date, no study so far considers the impact of non-surgical root canal treatment (NSRCT) of irreversible pulpitis teeth under either local infiltration or block anesthesia on hemodynamic change possibly related to TCR. METHODS: This study enrolled 111 patients with 138 irreversible pulpitis teeth that were treated by two sessions of NSRCT. The first session involved mainly the removal of vital pulp tissue with the direct stimulation of the dental branches of the trigeminal nerve, and the second session included the root canal enlargement and debridement with minimal disturbance to the dental branches of the trigeminal nerve. Vital signs mainly the blood pressure were recorded during both NSRCT sessions. RESULTS: The incidences of NSRCT patients with MABP decrease ≧10%, ≧15%, or ≧20% were all significantly higher in the first NSRCT session than in the second NSRCT session (all the P-values < 0.001). In the first NSRCT session, the incidence of patients with MABP decrease ≧10% was significantly associated with tooth type. For both upper and lower teeth, the patients with premolars treated by NSRCR had significantly higher incidences of MABP decrease ≧10% than those with either anterior or molar teeth treated by NSRCR (all the P-values < 0.05). CONCLUSION: We conclude that vital pulp extirpation may lead to a substantial drop in patient's blood pressure possibly related to TCR.

Effects of fluoride and epigallocatechin gallate on soft-drink-induced dental erosion of enamel and root dentin.

BACKGROUND/PURPOSE: Fluoride and epigallocatechin gallate (EGCG) have been proven to prevent dental caries. The purpose of this study was to evaluate the effects of fluoride and EGCG on soft-drink-induced dental erosion in vitro. METHODS: Forty enamel and dentin specimens were prepared from extracted human teeth. The specimens were divided into 4 groups and treated separately with distilled water (as control), 0.5 M sodium fluoride (NF), 400 µM EGCG (EG), and a solution containing 0.5 M NaF and 400 µM EGCG (FG). Cyclic erosive treatment was performed according to the experimental procedures. The specimens were analyzed using laser scanning confocal microscopy, scanning electron microscopy, and a microhardness tester. The data were analyzed using ANOVA and Bonferroni's post hoc test. The significance level was set at 5%. RESULTS: The amount of substance loss was lower in the NF and EG groups than in the control group (p < 0.05). The erosion-caused substance loss was more pronounced in the dentin than in the enamel specimens. Surface microhardness loss was lower in the NF and EG groups than in the control group (p < 0.05). The diameter of the dentinal tubule was wider in the control group than in the NF and EG groups (p < 0.05). No combined effects were observed in the FG group. CONCLUSION: Both fluoride and EGCG are effective in preventing soft-drink-induced erosion compared with the control group. Fluoride and EGCG may interfere with each other. The mechanisms of the anti-erosive effect need to be explored in the future.

Tooth Germ-Like Construct Transplantation for Whole-Tooth Regeneration: An In Vivo Study in the Miniature Pig.

The purpose of this study was to demonstrate the feasibility of whole-tooth regeneration using a tooth germ-like construct. Dental pulp from upper incisors, canines, premolars, and molars were extracted from sexually mature miniature pigs. Pulp tissues were cultured and expanded in vitro to obtain dental pulp stem cells (DPSCs), and cells were differentiated into odontoblasts and osteoblasts. Epithelial cells were isolated from gingival epithelium. The epithelial cells, odontoblasts, and osteoblasts were seeded onto the surface, upper, and lower layers, respectively, of a bioactive scaffold. The lower first and second molar tooth germs were removed bilaterally and the layered cell/scaffold constructs were transplanted to the mandibular alveolar socket of a pig. At 13.5 months postimplantation, seven of eight pigs developed two teeth with crown, root, and pulp structures. Enamel-like tissues, dentin, cementum, odontoblasts, and periodontal tissues were found upon histological inspection. The regenerated tooth expressed dentin matrix protein-1 and osteopontin. All pigs had regenerated molar teeth regardless of the original tooth used to procure the DPSCs. Pigs that had tooth germs removed or who received empty scaffolds did not develop teeth. Although periodontal ligaments were generated, ankylosis was found in some animals. This study revealed that implantation of a tooth germ-like structure generated a complete tooth with a high success rate. The implant location may influence the morphology of the regenerated tooth.

NADPH oxidase 4 is involved in the triethylene glycol dimethacrylate-induced reactive oxygen species and apoptosis in human embryonic palatal mesenchymal and dental pulp cells.

OBJECTIVES: Triethylene glycol dimethacrylate (TEGDMA) is a common component of resin-based dental composites and endodontic sealers. TEGDMA induces apoptosis in several types of cells. However, the mechanisms are not completely understood. The aim of this study was to investigate the mechanisms underlying TEGDMA-induced apoptosis in human embryonic palatal mesenchymal (HEPM) pre-osteoblasts and primary human dental pulp (HDP) cells. MATERIAL AND METHODS: Cell viability was examined after TEGDMA treatment. Cell cycle progression was checked by flow cytometry. Apoptotic cells were evaluated using terminal deoxynucleotidyl transferase (TdT)-mediated dUTP nick end labeling assay and visualized by fluorescence microscopy. Western blot analyses were performed to determine expressions of apoptosis-related proteins. The production of reactive oxygen species (ROS) was detected using flow cytometry. NADPH oxidase 4 (NOX4) expression levels were investigated using real-time quantitative polymerase chain reaction and Western blot analyses. RESULTS: TEGDMA increased cytosol cytochrome c levels and activated caspase-9 in HEPM and HDP cells. TEGDMA decreased the expression of anti-apoptotic protein Bcl-XL. TEGDMA-induced apoptosis was inhibited by caspase-9-specific inhibitor, anti-oxidants, NOX inhibitor, NOX4 inhibitor, and NOX4 small interfering RNA (siRNA). TEGDMA increased ROS production and upregulated NOX4 mRNA and protein expression. TEGDMA-induced intracellular ROS production was inhibited by NOX inhibitor and NOX4 inhibitor. CONCLUSIONS: We demonstrate significant involvement of NOX4 in the TEGDMA-induced ROS. NOX4-derived ROS subsequently induces mitochondrial cytochrome c release leading to apoptosis through activation of the intrinsic apoptotic pathway. CLINICAL RELEVANCE: NOX4 may be a potential target for strategies to prevent or ameliorate the TEGDMA-induced toxicity in HEPM and HDP cells.

Comparison of clinical parameters and environmental noise levels between regular surgery and piezosurgery for extraction of impacted third molars.

BACKGROUND/PURPOSE: Impacted third molars can be extracted by regular surgery or piezosurgery. The aim of this study was to compare clinical parameters and device-produced noise levels between regular surgery and piezosurgery for the extraction of impacted third molars. METHODS: Twenty patients (18 women and 2 men, 17-29 years of age) with bilateral symmetrical impacted mandibular or maxillary third molars of the same level were included in this randomized crossover clinical trial. The 40 impacted third molars were divided into a control group (n = 20), in which the third molar was extracted by regular surgery using a high-speed handpiece and an elevator, and an experimental group (n = 20), in which the third molar was extracted by piezosurgery using a high-speed handpiece and a piezotome. The clinical parameters were evaluated by a self-reported questionnaire. The noise levels produced by the high-speed handpiece and piezotome were measured and compared between the experimental and control groups. RESULTS: Patients in the experimental group had a better feeling about tooth extraction and force delivery during extraction and less facial swelling than patients in the control group. However, there were no significant differences in noise-related disturbance, extraction period, degree of facial swelling, pain score, pain duration, any noise levels produced by the devices under different circumstances during tooth extraction between the control and experimental groups. CONCLUSION: The piezosurgery device produced noise levels similar to or lower than those of the high-speed drilling device. However, piezosurgery provides advantages of increased patient comfort during extraction of impacted third molars.

Effect of the precrack preparation with an ultrasonic instrument on the ceramic bracket removal.

BACKGROUND/PURPOSE: In terms of fracture mechanics, a precrack preparation may facilitate the propagation of a break through the expected fracture plane during the bracket debonding process. The purpose of this study was to evaluate the effect of an ultrasonic precrack preparation on the debonding force and failure modes of ceramic bracket removal. METHODS: Eighty extracted premolars were assigned to four groups: Inspire, precrack Inspire, Clarity, and precrack Clarity groups, with each group containing 20 teeth. The precrack preparations were made at the mesial gingival line angle of Inspire brackets and on the mesial side of Clarity brackets with an ultrasonic tip. Debonding force, failure modes, and bracket breakage score were measured and recorded. Fracture surfaces after bracket debonding were observed with scanning electron microscopy (SEM). RESULTS: We found that the ultrasonic precrack preparation could significantly decrease the average debonding force and the mean bracket breakage scores of both kinds of ceramic brackets. After bracket debonding, 80% of brackets in the precrack Inspire group and 100% of brackets in the precrack Clarity group showed no bracket failure. However, only 25% of brackets in the Inspire group and 75% of brackets in the Clarity group showed no bracket failure. SEM micrographs showed a precrack notch at the adhesive resin after precrack preparation, and no enamel damage was noted after the bracket debonding. CONCLUSION: The ultrasonic precrack preparation can significantly decrease the debonding force and may guide the bracket debonding through a favorable fracture plane without damage to either the bracket or the enamel.

Revisiting the stability of mini-implants used for orthodontic anchorage.

BACKGROUND/PURPOSE: The aim of this study is to comprehensively analyze the potential factors affecting the failure rates of three types of mini-implants used for orthodontic anchorage. METHODS: Data were collected on 727 mini-implants (miniplates, predrilled titanium miniscrews, and self-drilling stainless steel miniscrews) in 220 patients. The factors related to mini-implant failure were investigated using a Chi-square test for univariate analysis and a generalized estimating equation model for multivariate analysis. RESULTS: The failure rate for miniplates was significantly lower than for miniscrews. All types of mini-implants, especially the self-drilling stainless steel miniscrews, showed decreased stability if the previous implantation had failed. The stability of predrilled titanium miniscrews and self-drilling stainless steel miniscrews were comparable at the first implantation. However, the failure rate of stainless steel miniscrews increased at the second implantation. The univariate analysis showed that the following variables had a significant influence on the failure rates of mini-implants: age of patient, type of mini-implant, site of implantation, and characteristics of the soft tissue around the mini-implants. The generalized estimating equation analysis revealed that mini-implants with miniscrews used in patients younger than 35 years, subjected to orthodontic loading after 30 days and implanted on the alveolar bone ridge, have a significantly higher risk of failure. CONCLUSION: This study revealed that once the dental surgeon becomes familiar with the procedure, the stability of orthodontic mini-implants depends on the type of mini-implant, age of the patient, implantation site, and the healing time of the mini-implant. Miniplates are a more feasible anchorage system when miniscrews fail repeatedly.

Sphingosine-1-phosphate stimulated connective tissue growth factor expression in human buccal fibroblasts: Inhibition by epigallocatechin-3-gallate.

BACKGROUND/PURPOSE: Connective tissue growth factor (CCN2) has been associated with the pathogenesis of various fibrotic diseases, including oral submucous fibrosis (OSF). The chemical constituents of areca nut along with the mechanical trauma cause OSF. The coarse fibers of areca nut injure the mucosa and hence sphingosine-1-phosphate (S1P) is released at the wounded sites. Recent studies have shown that S1P is involved in wound healing and the development of fibrosis. The aims of this study were to investigate the effects of S1P on CCN2 expression in human buccal fibroblasts (HBFs) and identify the potential targets for drug intervention or chemoprevention of OSF. METHODS: Western blot analyses were used to study the effects of S1P on CCN2 expression and its signaling pathways in HBFs and whether epigallocatechin-3-gallate (EGCG), the main and most significant polyphenol in green tea, could inhibit this pathway. RESULTS: S1P significantly enhanced CCN2 synthesis in HBFs. This effect can be inhibited by c-Jun NH2-terminal kinase (JNK) inhibitor and extracellular signal-regulated kinase inhibitor but not by P38 mitogen-activated protein kinase inhibitor. Interestingly, EGCG completely blocked S1P-induced CCN2 expression via suppressing S1P-induced JNK phosphorylation. CONCLUSION: S1P released by repetitive mechanical trauma during AN chewing may contribute to the pathogenesis of OSF through upregulating CCN2 expression in HBFs. EGCG could be an adjuvant to the current offered therapy options or the prevention of OSF through suppression of JNK activation.