RESUMEN
Reactive oxygen and nitrogen species are small reactive molecules derived from elements in the airâoxygen and nitrogen. They are produced in biological systems to mediate fundamental aspects of cellular signaling but must be very tightly balanced to prevent indiscriminate damage to biological molecules. Small molecule probes can transmute the specific nature of each reactive oxygen and nitrogen species into an observable luminescent signal (or even an acoustic wave) to offer sensitive and selective imaging in living cells and whole animals. This review focuses specifically on small molecule probes for superoxide, hydrogen peroxide, hypochlorite, nitric oxide, and peroxynitrite that provide a luminescent or photoacoustic signal. Important background information on general photophysical phenomena, common probe designs, mechanisms, and imaging modalities will be provided, and then, probes for each analyte will be thoroughly evaluated. A discussion of the successes of the field will be presented, followed by recommendations for improvement and a future outlook of emerging trends. Our objectives are to provide an informative, useful, and thorough field guide to small molecule probes for reactive oxygen and nitrogen species as well as important context to compare the ecosystem of chemistries and molecular scaffolds that has manifested within the field.
Asunto(s)
Especies de Nitrógeno Reactivo , Especies Reactivas de Oxígeno , Especies de Nitrógeno Reactivo/metabolismo , Especies de Nitrógeno Reactivo/química , Especies Reactivas de Oxígeno/metabolismo , Animales , Humanos , Sondas Moleculares/química , Sondas Moleculares/metabolismo , Ácido Peroxinitroso/química , Ácido Peroxinitroso/metabolismoRESUMEN
SignificanceAlthough most studies of the genetic regulation of genome stability involve an analysis of mutations within the coding sequences of genes required for DNA replication or DNA repair, recent studies in yeast show that reduced levels of wild-type enzymes can also produce a mutator phenotype. By whole-genome sequencing and other methods, we find that reduced levels of the wild-type DNA polymerase ε in yeast greatly increase the rates of mitotic recombination, aneuploidy, and single-base mutations. The observed pattern of genome instability is different from those observed in yeast strains with reduced levels of the other replicative DNA polymerases, Pol α and Pol δ. These observations are relevant to our understanding of cancer and other diseases associated with genetic instability.
Asunto(s)
ADN Polimerasa II , Saccharomyces cerevisiae , ADN Polimerasa II/metabolismo , Replicación del ADN/genética , Inestabilidad Genómica/genética , Humanos , Mutación , Saccharomyces cerevisiae/metabolismoRESUMEN
Most nonoxide catalysts based on transition metal elements will inevitably change their primitive phases under anodic oxidation conditions in alkaline media. Establishing a relationship between the bulk phase and surface evolution is imperative to reveal the intrinsic catalytic active sites. In this work, it is demonstrated that the introduction of Fe facilitates the phase transition of orthorhombic CoSe2 into its cubic counterpart and then accelerates the Co-Fe hydroxide layer generation on the surface during electrocatalytic oxygen evolution reaction (OER). As a result, the Fe-doped cubic CoSe2 catalyst exhibits a significantly enhanced activity with a considerable overpotential decrease of 79.9 and 66.9 mV to deliver 10 mA·cm-2 accompanied by a Tafel slope of 48.0 mV·dec-1 toward OER when compared to orthorhombic CoSe2 and Fe-doped orthorhombic CoSe2, respectively. Density functional theory (DFT) calculations reveal that the introduction of Fe on the surface hydroxide layers will tune electron density around Co atoms and raise the d-band center. These findings will provide deep insights into the surface reconstitution of the OER electrocatalysts based on transition metal elements.
RESUMEN
A Gram-stain-negative, light khaki, strictly aerobic, rod-shaped, motile via multiple flagella, and catalase- and oxidase-positive bacterium, designated as SSM4.3T, was isolated from the seaweed of Gouqi Island in the East China Sea. The novel isolate grows at 0-5.0% NaCl concentrations (w/v) (optimum 1%), pH 5.0-9.0 (optimum pH 7.0), and 15-37 °C (optimum 30 °C). The 16S rRNA gene sequences-based phylogeny indicates that the novel marine isolate belongs to the family Rhizobiaceae and that it shared the greatest sequence similarity (98.9%) with Peteryoungia rhizophila CGMCC 1.15691T. This classification was also supported by phylogenetic analysis using core genes. The predominant fatty acids (≥ 10%) of the strain were identified as C18:1 ω7c/C18:1 ω6c. Q-10 was identified as the major isoprenoid quinone, with trace levels of Q-9 present. The major polar lipids were identified as diphosphatidylglycerol, phosphatidylethanolamine and phosphatidylglycerol. The complete genome size of strain SSM4.3T is 4.39 Mb with a DNA G+C content of 61.3%. The average nucleotide identity, digital DNA-DNA hybridization, and average amino acid identity values between the genomes of strain SSM4.3T and its closely related representatives were 74.80-86.93%, 20.00-32.30%, and 70.30-91.52%, respectively. Phylogenetic analysis, grounded on the core genes, reveals the evolutionary relationship between SSM4.3T and other Peteryoungia strains. Pan-genomics analysis of 8 previously classified Peteryoungia species and SSM4.3T revealed their unique genetic features and functions. Overall, strain SSM4.3T was considered to be a new species of the Peteryoungia genus; the name Peteryoungia algae sp. nov. has been proposed, with type strain SSM4.3T (= LMG 32561 = MCCC 1K07170).
Asunto(s)
Composición de Base , ADN Bacteriano , Ácidos Grasos , Filogenia , ARN Ribosómico 16S , Algas Marinas , China , ARN Ribosómico 16S/genética , Algas Marinas/microbiología , ADN Bacteriano/genética , Ácidos Grasos/análisis , Ácidos Grasos/química , Técnicas de Tipificación Bacteriana , Genoma Bacteriano , Análisis de Secuencia de ADN , Islas , Hibridación de Ácido NucleicoRESUMEN
A novel bacterium designated as SSA5.23T was isolated from seawater. Cells of SSA5.23T are Gram-stain-negative, short, rod-shaped, and exhibit motility via numerous peritrichous flagella. The strain could grow at temperatures ranging from 15 to 35 °C (optimum at 25 °C), in a salinity range of 0-5.0% (w/v) NaCl, and within a pH range of 6.0-9.0 (optimum at pH 7.0). The predominant cellular fatty acid of SSA5.23T was C18:1 ω7c/C18:1 ω6c, and the major respiratory quinones were Q-9 and Q-10. Diphosphatidylglycerol, phosphatidylethanolamine, and phosphatidylglycerol were identified as the primary polar lipids. The complete genome (5.47 Mb) of SSA5.23T comprises of a circular chromosome of 3.64 Mb and three plasmids, specifically sized at 59.73 kb, 227.82 kb, and 1.54 Mb, respectively. Certain genes located on the plasmids play roles in denitrification, oxidative stress resistance, and osmotic tolerance, which likely contribute to the adaptability of this strain in marine conditions. Core-proteome average amino acid identity analysis effectively identified the strain's affiliation with the genus Affinirhizobium, showing the highest value (89.9%) with Affinirhizobium pseudoryzae DSM 19479T. This classification was further supported by the phylogenetic analysis of concatenated alignment of 170 single-copy orthologous proteins. When compared to related reference strains, SSA5.23T displayed an average nucleotide identity ranging from 74.9 to 80.3% and digital DNA-DNA hybridization values ranging from 19.9 to 23.9%. Our findings confirmed that strain SSA5.23T represents a novel species of the genus Affinirhizobium, for which the name Affinirhizobium gouqiense sp. nov. (type strain SSA5.23T = LMG 32560T = MCCC 1K07165T) was suggested.
Asunto(s)
ADN Bacteriano , Ácidos Grasos , Genoma Bacteriano , Filogenia , Agua de Mar , Agua de Mar/microbiología , China , Ácidos Grasos/análisis , ADN Bacteriano/genética , Rhizobium/genética , Rhizobium/clasificación , Rhizobium/aislamiento & purificación , Composición de Base , Técnicas de Tipificación Bacteriana , ARN Ribosómico 16S/genética , Análisis de Secuencia de ADN , Islas , GenómicaRESUMEN
Twenty 3-acyloxymaltol/ethyl maltol derivatives (7a-j and 8a-j) were synthesized and evaluated in vitro for their anti-oomycete activity against Phytophthora capsici, respectively. Among all of twenty derivatives, more than half of the compounds 7f, 7h, 8a-h and 8j had anti-oomycete activity higher than the positive control zoxamide (EC50 = 22.23 mg/L), and the EC50 values of 18.66, 20.32, 12.80, 16.18, 10.59, 14.98, 16.80, 10.36, 15.32, 12.64, and 13.59 mg/L, respectively. Especially, compounds 8c and 8f exhibited the best anti-oomycete activity against P. capsici with EC50 values of 10.59 and 10.36 mg/L, respectively. Overall, hydroxyl group of maltol/ethyl maltol is important active modification site.
Asunto(s)
Phytophthora , Estructura Molecular , Phytophthora/efectos de los fármacos , Pironas/farmacología , Pironas/química , Pironas/síntesis química , Relación Estructura-Actividad , Diseño de FármacosRESUMEN
The carbonate electrolyte chemistry is a primary determinant for the development of high-voltage lithium metal batteries (LMBs). Unfortunately, their implementation is greatly plagued by sluggish electrode interfacial dynamics and insufficient electrolyte thermodynamic stability. Herein, lithium trifluoroacetate-lithium nitrate (LiTFA-LiNO3 ) dual-salt additive-reinforced carbonate electrolyte (LTFAN) is proposed for stabilizing high-voltage LMBs. We reveal that 1) the in situ generated inorganic-rich electrode-electrolyte interphase (EEI) enables rapid interfacial dynamics, 2) TFA- preferentially interacts with moisture over PF6 - to strengthen the moisture tolerance of designed electrolyte, and 3) NO3 - is found to be noticeably enriched at the cathode interface on charging, thus constructing Li+ -enriched, solvent-coordinated, thermodynamically favorable electric double layer (EDL). The superior moisture tolerance of LTFAN and the thermodynamically stable EDL constructed at cathode interface play a decisive role in upgrading the compatibility of carbonate electrolyte with high-voltage cathode. The LMBs with LTFAN realize 4.3â V-NCM523/4.4â V-NCM622 superior cycling reversibility and excellent rate capability, which is the leading level of documented records for carbonate electrode.
RESUMEN
The electrolyte chemistry is crucially important for promoting the practical application of lithium metal batteries (LMBs). Here, we demonstrate for the first time that 1,3-dimethylimidazolium dimethyl phosphate (DIDP) and trimethylsilyl trifluoroacetate (TMSF) can undergo in situ transesterification in carbonate electrolyte to generate dimethyl trimethylsilyl phosphate (DTMSP) and 1,3-dimethylimidazolium trifluoroacetate (DITFA) as multifunctional additives for LMBs. H2O and HF can be removed by the Si-O group in DTMSP to improve the moisture resistance of electrolyte and the stability of cathode. Furthermore, the dissolution of lithium nitrate (LiNO3) in carbonate electrolyte can be promoted by the trifluoroacetate anion (TFA-) in DITFA, thereby optimizing the solvation structure and transport kinetics of Li+. More importantly, both DTMSP and DITFA tend to preferential redox decomposition due to the low lowest unoccupied molecular orbital (LUMO) and high highest occupied molecular orbital (HOMO). Consequently, a thin and robust layer rich in P/N/Si on the cathode and an inorganic-rich layer (e.g. Li3N/Li3P) on the anode can be constructed and superior electrochemical performances are achieved. This artificial transesterification strategy to introduce favorable additives paves an efficient and ingenious route to high-performance electrolyte for LMBs.
RESUMEN
Owing to their distinctive 1,3-dipolar structure, the catalytic asymmetric hydrogenation of nitrones to hydroxylamines has been a formidable and longstanding challenge, characterized by intricate enantiocontrol and susceptibility to N-O bond cleavage. In this study, the asymmetric hydrogenation and transfer hydrogenation of nitrones were accomplished with a tethered TsDPEN-derived cyclopentadienyl rhodium(III) catalyst (TsDPEN: p-toluenesulfonyl-1,2-diphenylethylene-1,2-diamine), the reaction proceeds via a novel 7-membered cyclic transition state, producing chiral hydroxylamines with up to 99 % yield and >99 % ee. The practical viability of this methodology was underscored by gram-scale catalytic reactions and subsequent transformations. Furthermore, mechanistic investigations and DFT calculations were also conducted to elucidate the origin of enantioselectivity.
RESUMEN
A Gram-negative, rod-shaped and aerobic bacterial strain B3.7T, was isolated from the sediment of Zhairuo Island, Zhoushan city, Zhejiang Province, PR China. Maximum growth of strain B3.7T was observed at 30 °C when cultured in a medium containing 0.5â% (w/v) NaCl. Phylogenetic analysis based on 16S rRNA gene sequences demonstrated that strain B3.7T belonged to the genus Shinella; it showed the highest sequence similarity of 98.47â% to Shinella kummerowiae CCBAU 25048T. The average nucleotide identity and digital DNA-DNA hybridization values between strain B3.7T and its reference strains were 82.9-84.2â% and 26.1-27.3â%, respectively. Chemotaxonomic analysis indicated that the sole respiratory quinone was Q-10 and the predominant cellular fatty acids were C19â:â0 cyclo ω8c, C16â:â0, C18â:â1 ω7c 11-methyl and summed feature 8 (C18â:â1 ω7c and/or C18â:â1 ω6c). The polar lipid profile was composed of diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, three unidentified phospholipids and two unidentified aminolipids. Collectively, strain B3.7T can be considered to represent a novel species, for which the name Shinella sedimenti sp. nov. is proposed. The type strain is B3.7T (=MCCC 1K07163T=LMG 32559T).
Asunto(s)
Ácidos Grasos , Ácidos Grasos/química , Filogenia , ARN Ribosómico 16S/genética , Análisis de Secuencia de ADN , ADN Bacteriano/genética , Técnicas de Tipificación Bacteriana , Composición de Base , ChinaRESUMEN
A novel bacterium designated A3.4T was isolated from the beach sediment of Zhairuo Island, which is located in the East China Sea. Strain A3.4T was found to be Gram-stain negative, cream coloured, rod-shaped, aerobic and motile via a single monopolar flagellum. The isolate grows at 20-37 °C (optimum 25-30 °C), at pH 6.0-8.0 (optimum pH 7.0-8.0), and in the presence of 0-5.0% (w/v) NaCl (optimum 0.5-1%). A3.4T has catalase and oxidase activity. The predominant fatty acids (≥ 10%) of the strain were identified as C16:0, summed feature 3 (C16:1 ω7c /C16:1 ω6c) and summed feature 8 (C18:1 ω7c /C18:1 ω6c). Q-9 was identified as the major isoprenoid quinone, with trace levels of Q-8 present. The major polar lipids were identified as diphosphatidylglycerol, phosphatidylethanolamine and phosphatidylglycerol. The draft genome size is 3.55 Mb, with a DNA G + C content of 57.7 mol%. Analysis of the 16S rRNA gene sequence of strain A3.4T indicates that it belongs to the genus Atopomonas and shares high sequence similarity with Atopomonas hussainii JCM 19513T (97.60%). This classification was also supported by phylogenetic analysis using rpoB and several core genes. The genome of strain A3.4T shows an average nucleotide identity of 82.3%, an amino acid identity of 83.0%, and a digital DNA-DNA hybridization value of 22.1% with A. hussainii. In addition, 20 conserved signature indels (CSIs) were identified to be specific for A3.4T and A. hussainii, demonstrating that the strain A3.4T is closely related to A. hussainii rather than other species of family Pseudomonadaceae. Hundreds of unique genes were identified in the genomes of A3.4T and A. hussainii, which may underly multiple phenotypic differences between these strains. Based on phenotypic, chemotaxonomic, phylogenetic, and genomic investigations, strain A3.4T is concluded to represent a novel species of the genus Atopomonas, for which the name Atopomonas sediminilitoris sp. nov. is proposed. The type strain is A3.4T (= LMG 32563T = MCCC 1K07166T).
Asunto(s)
Ácidos Grasos , Fosfolípidos , Fosfolípidos/análisis , Filogenia , ARN Ribosómico 16S/genética , Técnicas de Tipificación Bacteriana , Ácidos Grasos/análisis , ADN , China , ADN Bacteriano/genética , ADN Bacteriano/química , Análisis de Secuencia de ADNRESUMEN
A novel Gram-staining negative, aerobic, rod-shaped bacterium, designated strain YIM DDC1T, was isolated from an estuary sediment sample of Dongda River flowing into Dianchi lake in Yunnan, southwest China. The strain displayed growth at 10-40 °C (optimum of 28 °C), pH 5.0-9.0 (optimum of 7.0-8.0) and in presence of 0-3% (w/v) NaCl (optimum of 0-1%). Strain YIM DDC1T comprised diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, phosphatidylcholine and two unidentified aminolipids as the predominant polar lipids; the ubiquinone 10 as the major respiratory quinone; and summed feature 8 (C18:1ω6c and/or C18:1ω7c), summed feature 3 (C16:1ω7c and/or C16:1ω6c) and C18:1 2-OH as the major cellular fatty acids. Analysis of 16S rRNA showed that YIM DDC1T represents a member of the genus Azospirillum, and was closely related to A. brasilense ATCC 29145 T (98.9%), A. baldaniorum Sp245T (98.2%), A. argentinense Az39T (98.2%) and A. formosense CC-Nfb-7 T (98.2%). The draft genome size was 7.15 Mbp with a 68.4% G + C content. The average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values between strain YIM DDC1T and the aforementioned closely related strains exhibited similarity in the range of 93.8-93.5% and 53.7-52.7%, respectively. nif gene cluster (nifHDK) and denitrification genes ((napA, nirS, nirK, norBC and nosZ) detected in the genome indicated its potential nitrogen fixation and full-fledged denitrifying function. Based on combined genotypic and phenotypic data, strain YIM DDC1T represents a novel species of the genus Azospirillum, for which the name Azospirillum aestuarii sp. nov. is proposed. The type strain is YIM DDC1T (= KCTC 42887 T = CGMCC 1.17325 T).
Asunto(s)
Azospirillum , Fosfolípidos , Fosfolípidos/química , Ríos/microbiología , Azospirillum/genética , Estuarios , ARN Ribosómico 16S/genética , China , Ácidos Grasos/química , ADN , Filogenia , ADN Bacteriano/genética , Técnicas de Tipificación Bacteriana , Análisis de Secuencia de ADNRESUMEN
BACKGROUND: Evidence on the role of physical activity (PA) on healthcare utilization and expenditure is limited in China. We aimed to examine the association between the total physical activity (TPA) per week, healthcare service use and expenditure. METHODS: We extracted the data from China Health and Retirement Longitudinal Study (CHARLS) 2011, 2013, and 2015. Participants more than 50 years old who completed the follow-up for the three waves were enrolled. We converted the volume of vigorous physical activity (VPA) into an equivalent volume of moderate physical activity (MPA) and calculated the TPA per week for each participant. 12,927 of the 17,708 participants in CHARLS were included in our analysis. More than one-third of participants over 50 years old never participate in any moderate or intensity activity, and the median of self-reported moderate or intensity PA was about 525 (IQR 0-1680) MET-minutes per week in 2015. RESULTS: Compared to inactive subjects, the highest level of TPA was significantly related to the decreased risk number of inpatient visits (IRR: 0.58; 95% CI:0.50-0.67, p < 0.001), inpatient hospital days (IRR: 0.60; 95% CI: 0.42-0.84, p < 0.01), healthcare expenditure (IRR: 0.71; 95% CI: 0.65-0.79, p < 0.001) and catastrophic health expenditures (OR: 0.57; 95% CI: 0.45-0.72, p < 0.001) after adjusting for covariates. CONCLUSIONS: Engaging in moderate-to-vigorous PA may drive a potential decrease in healthcare utilization, healthcare expenditure and household financial risk with a dose-response relationship in China, and some possible policy implications in public health may be considered to promote exercise in the middle-aged and elderly to reduce the medical burden on individuals and healthcare systems.
Asunto(s)
Ejercicio Físico , Gastos en Salud , Aceptación de la Atención de Salud , Anciano , Humanos , Persona de Mediana Edad , China , Estudios Longitudinales , Jubilación , Salud PúblicaRESUMEN
Collaborative testing has been demonstrated the ability to improve students' performance, enhance students' learning, and aid in knowledge retention in many different courses. However, this examination mode lacks the process of teacher feedback. Herein, a short teacher feedback from was added immediately after the collaborative testing to improve the students' performance. A parasitology class of 121 undergraduates was randomized into two groups: group A and group B. Collaborative testing was carried out at the end of theoretical teaching. During the test, students would first answer questions as individuals for 20 minutes. Then, students from group A answered the same questions in groups (5 students in each group) for 20 minutes, while the group-testing duration was only 15 minutes in group B. Immediately after the group testing, teachers conducted a 5-minute feedback about the morphology identification according to the analysis of the answers by group B. Four weeks later, a final test was conducted in an individual test. The total scores and scores for each examination content were analyzed. The results showed that there was no significant difference in the final exam scores between both groups (t = -1.278, P = 0.204). However, the morphological and diagnostic test results of the final examination in group B were significantly higher than those of the midterm examination, while there was no significant change in group A (t = 4.333, P = 0.051). The results confirmed that the teacher feedback after the collaborative testing can effectively make up for the students' knowledge gaps.NEW & NOTEWORTHY This study found that collaborative group testing is helpful for teachers to grasp students' knowledge gaps more easily and the teacher feedback after the collaborative group testing can effectively make up for the knowledge gaps of students.
Asunto(s)
Estudiantes , Humanos , RetroalimentaciónRESUMEN
Modern embedded systems have achieved relatively high processing power. They can be used for edge computing and computer vision, where data are collected and processed locally, without the need for network communication for decision-making and data analysis purposes. Face detection, face recognition, and pose detection algorithms can be executed with acceptable performance on embedded systems and are used for home security and monitoring. However, popular machine learning frameworks, such as MediaPipe, require relatively high usage of CPU while running, even when idle with no subject in the scene. Combined with the still present false detections, this wastes CPU time, elevates the power consumption and overall system temperature, and generates unnecessary data. In this study, a low-cost low-resolution infrared thermal sensor array was used to control the execution of MediaPipe's pose detection algorithm using single-board computers, which only runs when the thermal camera detects a possible subject in its field of view. A lightweight algorithm with several filtering layers was developed, which allowed the effective detection and isolation of a person in the thermal image. The resulting hybrid computer vision proved effective in reducing the average CPU workload, especially in environments with low activity, almost eliminating MediaPipe's false detections, and reaching up to 30% power saving in the best-case scenario.
Asunto(s)
Algoritmos , Carga de Trabajo , Humanos , Computadores , Aprendizaje AutomáticoRESUMEN
Aqueous rechargeable zinc-ion batteries (ARZBs) are impeded by the mutual problems of unstable cathode, electrolyte parasitic reactions, and dendritic growth of zinc (Zn) anode. Herein, a triple-functional strategy by introducing the tetramethylene sulfone (TMS) to form a hydrated eutectic electrolyte is reported to ameliorate these issues. The activity of H2 O is inhibited by reconstructing hydrogen bonds due to the strong interaction between TMS and H2 O. Meanwhile, the preferentially adsorbed TMS on the Zn surface increases the thickness of double electric layer (EDL) structure, which provides a shielding buffer layer to suppress dendrite growth. Interestingly, TMS modulates the primary solvation shell of Zn2+ ultimately to achieve a novel solvent co-intercalation ((Zn-TMS)2+ ) mechanism, and the intercalated TMS works as a "pillar" that provides more zincophilic sites and stabilizes the structure of cathode (NH4 V4 O10 , (NVO)). Consequently, the Zn||NVO battery exhibits a remarkably high specific capacity of 515.6â mAh g-1 at a low current density of 0.2â A g-1 for over 40â days. This multi-functional electrolytes and solvent co-intercalation mechanism will significantly propel the practical development of aqueous batteries.
RESUMEN
With ever-increasing pursuit for high-value output in recycling spent lithium-ion batteries (LIBs), traditional recycling methods of cathodes tend to be obsolete because of the complicated procedures. Herein, we first upcycle spent polycrystal LiNi0.88 Co0.095 Al0.025 O2 (S-NCA) to high value-added single-crystalline and Li-rich cathode materials through a simple but feasible LiOH-Na2 SO4 eutectic molten salt strategy. The in situ X-ray diffraction technique and a series of paratactic experiments record the evolution process of upcycling and prove that excessive Li occupies the transition metal (TM) layers. Beneficial from the single-crystalline and Li-rich nature, the regenerated NCA (R-NCA) exhibits remarkably enhanced electrochemical performances in terms of long-term cyclability, high-rate performance and low polarization. This approach can also be successfully extended to other cathode materials e.g., LiNix Coy Mnz O2 (NCM) and mixed spent NCAs with varied degree of Li loss.
Asunto(s)
Litio , Cloruro de Sodio , Suministros de Energía Eléctrica , Electrodos , IonesRESUMEN
The rampant dendrites and hydrogen evolution reaction (HER) resulting from the turbulent interfacial evolution at the anode/electrolyte are the main culprits of short lifespan and low Coulombic efficiency of Zn metal batteries. In this work, a versatile protective coating with excellent zincophilic and amphoteric features is constructed on the surface of Zn metal (ZP@Zn) as dendrite-free anodes. This kind of protective coating possesses the advantages of reversible proton storage and rapid desolvation kinetics, thereby mitigating the HER and facilitating homogeneous nucleation concomitantly. Furthermore, the space charge polarization effect promotes charge redistribution to achieve uniform Zn deposition. Accordingly, the ZP@Zn symmetric cell manifests excellent reversibility at an ultrahigh cumulative plating capacity of 4700â mAh cm-2 and stable cycling at 80 % depth of discharge (DOD). The ZP@Zn//V6 O13 pouch cell also reveals superior cycling stability with a high capacity of 326.6â mAh g-1 .
RESUMEN
Due to their low reactivity, difficult enantiocontrol, and proneness to N-O bond cleavage, the catalytic asymmetric hydrogenation of oximes to hydroxylamines has remained a significant challenge. Herein, a Lewis and Brønsted acid cooperation strategy was established for the asymmetric hydrogenation of oximes, providing the corresponding hydroxylamines with up to 95% yield and up to 96% ee. Addition of Lewis and Brønsted acid was crucial to obtain high conversion and enantioselectivity. Mechanistic investigations indicates that the thiourea fragment of the ligand, Lewis acid (In(OTf)3 or Zn(OAc)2), as well as the Brønsted acid (l-CSA) played vital roles in the control of reactivity and enantioselectivity of the reaction. In addition, the synthetic elaboration of this transformation was demonstrated by gram scale experiment with retention of the yield and enantioselectivity.
Asunto(s)
Ácidos de Lewis , Oximas , Hidrogenación , Ligandos , Estereoisomerismo , TioureaRESUMEN
Recycling spent lithium-ion batteries (LIBs) is an urgent task in view of the resource shortage and environmental concerns. Here, a facile ternary molten salt approach is presented for efficiently regenerating the LiNi0.5 Co0.2 Mn0.3 O2 (NCM523) cathode of spent LIBs. Such an approach involves the treatment of spent cathode powder in the ternary molten salt at a moderate temperature (400 °C) and subsequent annealing in oxygen. The Li loss and degraded phases in spent NCM that cause the capacity decay can be fully remedied after the regeneration process. As a result, the regenerated cathode delivers a reversible capacity of 160 mAh g-1 at 0.5 C with retention of 93.7% after 100 cycles and maintains a high capacity of 132 mAh g-1 at a high rate of 5 C. The electrochemical performance of regenerated NCM cathode is compared favorably to the fresh NCM cathode, which demonstrates the feasibility of the molten salt approach to directly regenerate spent NCM cathode.