Annual Report to the Nation on the Status of Cancer, part 2: Early assessment of the COVID-19 pandemic's impact on cancer diagnosis.

BACKGROUND: With access to cancer care services limited because of coronavirus disease 2019 control measures, cancer diagnosis and treatment have been delayed. The authors explored changes in the counts of US incident cases by cancer type, age, sex, race, and disease stage in 2020. METHODS: Data were extracted from selected US population-based cancer registries for diagnosis years 2015-2020 using first-submission data from the North American Association of Central Cancer Registries. After a quality assessment, the monthly numbers of newly diagnosed cancer cases were extracted for six cancer types: colorectal, female breast, lung, pancreas, prostate, and thyroid. The observed numbers of incident cancer cases in 2020 were compared with the estimated numbers by calculating observed-to-expected (O/E) ratios. The expected numbers of incident cases were extrapolated using Joinpoint trend models. RESULTS: The authors report an O/E ratio <1.0 for major screening-eligible cancer sites, indicating fewer newly diagnosed cases than expected in 2020. The O/E ratios were lowest in April 2020. For every cancer site except pancreas, Asians/Pacific Islanders had the lowest O/E ratio of any race group. O/E ratios were lower for cases diagnosed at localized stages than for cases diagnosed at advanced stages. CONCLUSIONS: The current analysis provides strong evidence for declines in cancer diagnoses, relative to the expected numbers, between March and May of 2020. The declines correlate with reductions in pathology reports and are greater for cases diagnosed at in situ and localized stage, triggering concerns about potential poor cancer outcomes in the coming years, especially in Asians/Pacific Islanders. PLAIN LANGUAGE SUMMARY: To help control the spread of coronavirus disease 2019 (COVID-19), health care organizations suspended nonessential medical procedures, including preventive cancer screening, during early 2020. Many individuals canceled or postponed cancer screening, potentially delaying cancer diagnosis. This study examines the impact of the COVID-19 pandemic on the number of newly diagnosed cancer cases in 2020 using first-submission, population-based cancer registry database. The monthly numbers of newly diagnosed cancer cases in 2020 were compared with the expected numbers based on past trends for six cancer sites. April 2020 had the sharpest decrease in cases compared with previous years, most likely because of the COVID-19 pandemic.

On the application, reporting, and sharing of in silico simulations for genetic studies.

In silico simulations play an indispensable role in the development and application of statistical models and methods for genetic studies. Simulation tools allow for the evaluation of methods and investigation of models in a controlled manner. With the growing popularity of evolutionary models and simulation-based statistical methods, genetic simulations have been applied to a wide variety of research disciplines such as population genetics, evolutionary genetics, genetic epidemiology, ecology, and conservation biology. In this review, we surveyed 1409 articles from five journals that publish on major application areas of genetic simulations. We identified 432 papers in which genetic simulations were used and examined the targets and applications of simulation studies and how these simulation methods and simulated data sets are reported and shared. Whereas a large proportion (30%) of the surveyed articles reported the use of genetic simulations, only 28% of these genetic simulation studies used existing simulation software, 2% used existing simulated data sets, and 19% and 12% made source code and simulated data sets publicly available, respectively. Moreover, 15% of articles provided no information on how simulation studies were performed. These findings suggest a need to encourage sharing and reuse of existing simulation software and data sets, as well as providing more information regarding the performance of simulations.

Twenty years since Joinpoint 1.0: Two major enhancements, their justification, and impact.

Since its release of Version 1.0 in 1998, Joinpoint software developed for cancer trend analysis by a team at the US National Cancer Institute has received a considerable attention in the trend analysis community and it became one of most widely used software for trend analysis. The paper published in Statistics in Medicine in 2000 (a previous study) describes the permutation test procedure to select the number of joinpoints, and Joinpoint Version 1.0 implemented the permutation procedure as the default model selection method and employed parametric methods for the asymptotic inference of the model parameters. Since then, various updates and extensions have been made in Joinpoint software. In this paper, we review basic features of Joinpoint, summarize important updates of Joinpoint software since its first release in 1998, and provide more information on two major enhancements. More specifically, these enhancements overcome prior limitations in both the accuracy and computational efficiency of previously used methods. The enhancements include: (i) data driven model selection methods which are generally more accurate under a broad range of data settings and more computationally efficient than the permutation test and (ii) the use of the empirical quantile method for construction of confidence intervals for the slope parameters and the location of the joinpoints, which generally provides more accurate coverage than the prior parametric methods used. We show the impact of these changes in cancer trend analysis published by the US National Cancer Institute.

CP*Trends: An Online Tool for Comparing Cohort and Period Trends Across Cancer Sites.

Cohort or period components of trends can provide a rationale for new research or point to clues on the effectiveness of control strategies. Graphical display of trends guides models that quantify the experience of a population. In this paper, a method for smoothing rates by single year of age and year is developed and displayed to show the contributions of period and cohort to trends. The magnitude of the contribution of period and/or cohort in a model for trends may be assessed by the percentage of deviance explained and the relative contributions of cohort (C) and period (P) individually, known as the C-P score. The method is illustrated using Surveillance, Epidemiology, and End Results data (1975-2014) on lung and bronchial cancer mortality in females and prostate and colorectal cancer incidence in males. Smoothed age-period and age-cohort rates provide a useful first step in studies of etiology and the impact of disease control without imposing a restrictive model. We found that, in this data set, cohort predominates for female lung and bronchial cancer and period predominates for male prostate cancer. However, the effects change with age for male colorectal cancer incidence, indicating an age shift in relevant exposures. These methods are applied on an interactive website for both incidence and mortality at over 20 cancer sites in the United States.

Early estimates of cancer incidence for 2015: Expanding to include estimates for white and black races.

BACKGROUND: The National Cancer Institute's cancer incidence estimates through 2015 from the Surveillance, Epidemiology, and End Results (SEER) registries' November 2017 submission are released in April 2018. METHODS: Early estimates (February 2017) of cancer incidence rates and trends from the SEER 18 registries for diagnoses in 2000 through 2015 were evaluated with a revised delay-adjustment model, which was used to adjust for the undercount of cases in the early release. For the first time, early estimates were produced for race (whites and blacks) along with estimates for new sites: the oral cavity and pharynx, leukemia, and myeloma. RESULTS: Model validation comparing delay-adjusted rates and trends through 2014 and using 2016 submissions showed good agreement. Differences in trends through 2015 in comparison with those through 2014 were evident. The rate of female breast cancer rose significantly from 2004 to 2015 by 0.3% per year (annual percent change [APC] = 0.3%); the prior trend through 2014 (the same magnitude) was not yet significant. The female colon and rectum cancer trend for whites became flat after previously declining. Lung and bronchus cancer for whites showed a significant decline (APC for males = -2.3%, 2012-2015; APC for females = -0.7%, 2011-2015). Thyroid cancer for black females changed from a continuous rise to a flat final segment (APC = 1.6%, not significant, 2011-2015). Both kidney and renal pelvis cancer (APC = 1.5%, 2011-2015) and childhood cancers (APC = 0.5%, 2000-2015) for white males showed a significant rise in the final segments from previously flat trends. Kidney and renal pelvis cancer for black males showed a change from a significant rise to a flat trend. CONCLUSIONS: The early release of SEER data continues to be useful as a preliminary estimate of the most current cancer incidence trends. Cancer 2018;124:2192-204. © 2018 American Cancer Society.

Early estimates of SEER cancer incidence, 2014.

BACKGROUND: Cancer incidence rates and trends for cases diagnosed through 2014 using data reported to the Surveillance, Epidemiology, and End Results (SEER) program in February 2016 and a validation of rates and trends for cases diagnosed through 2013 and submitted in February 2015 using the November 2015 submission are reported. New cancer sites include the pancreas, kidney and renal pelvis, corpus and uterus, and childhood cancer sites for ages birth to 19 years inclusive. METHODS: A new reporting delay model is presented for these estimates for more consistent results with the model used for the usual November SEER submissions, adjusting for the large case undercount in the February submission. Joinpoint regression methodology was used to assess trends. Delay-adjusted rates and trends were checked for validity between the February 2016 and November 2016 submissions. RESULTS: Validation revealed that the delay model provides similar estimates of eventual counts using either February or November submission data. Trends declined through 2014 for prostate and colon and rectum cancer for males and females, male and female lung cancer, and cervical cancer. Thyroid cancer and liver and intrahepatic bile duct cancer increased. Pancreas (male and female) and corpus and uterus cancer demonstrated a modest increase. Slight increases occurred for male kidney and renal pelvis, and for all childhood cancer sites for ages birth to 19 years. CONCLUSIONS: Evaluating early cancer data submissions, adjusted for reporting delay, produces timely and valid incidence rates and trends. The results of the current study support using delay-adjusted February submission data for valid incidence rate and trend estimates over several data cycles. Cancer 2017;123:2524-34. © 2017 American Cancer Society.

Improved confidence interval for average annual percent change in trend analysis.

This paper considers an improved confidence interval for the average annual percent change in trend analysis, which is based on a weighted average of the regression slopes in the segmented line regression model with unknown change points. The performance of the improved confidence interval proposed by Muggeo is examined for various distribution settings, and two new methods are proposed for further improvement. The first method is practically equivalent to the one proposed by Muggeo, but its construction is simpler, and it is modified to use the t-distribution instead of the standard normal distribution. The second method is based on the empirical distribution of the residuals and the resampling using a uniform random sample, and its satisfactory performance is indicated by a simulation study. Copyright © 2017 John Wiley & Sons, Ltd.

Bottom-up GGM algorithm for constructing multilayered hierarchical gene regulatory networks that govern biological pathways or processes.

BACKGROUND: Multilayered hierarchical gene regulatory networks (ML-hGRNs) are very important for understanding genetics regulation of biological pathways. However, there are currently no computational algorithms available for directly building ML-hGRNs that regulate biological pathways. RESULTS: A bottom-up graphic Gaussian model (GGM) algorithm was developed for constructing ML-hGRN operating above a biological pathway using small- to medium-sized microarray or RNA-seq data sets. The algorithm first placed genes of a pathway at the bottom layer and began to construct a ML-hGRN by evaluating all combined triple genes: two pathway genes and one regulatory gene. The algorithm retained all triple genes where a regulatory gene significantly interfered two paired pathway genes. The regulatory genes with highest interference frequency were kept as the second layer and the number kept is based on an optimization function. Thereafter, the algorithm was used recursively to build a ML-hGRN in layer-by-layer fashion until the defined number of layers was obtained or terminated automatically. CONCLUSIONS: We validated the algorithm and demonstrated its high efficiency in constructing ML-hGRNs governing biological pathways. The algorithm is instrumental for biologists to learn the hierarchical regulators associated with a given biological pathway from even small-sized microarray or RNA-seq data sets.

Genetic data simulators and their applications: an overview.

Computer simulations have played an indispensable role in the development and applications of statistical models and methods for genetic studies across multiple disciplines. The need to simulate complex evolutionary scenarios and pseudo-datasets for various studies has fueled the development of dozens of computer programs with varying reliability, performance, and application areas. To help researchers compare and choose the most appropriate simulators for their studies, we have created the genetic simulation resources (GSR) website, which allows authors of simulation software to register their applications and describe them with more than 160 defined attributes. This article summarizes the properties of 93 simulators currently registered at GSR and provides an overview of the development and applications of genetic simulators. Unlike other review articles that address technical issues or compare simulators for particular application areas, we focus on software development, maintenance, and features of simulators, often from a historical perspective. Publications that cite these simulators are used to summarize both the applications of genetic simulations and the utilization of simulators.

Genetic simulation tools for post-genome wide association studies of complex diseases.

Genetic simulation programs are used to model data under specified assumptions to facilitate the understanding and study of complex genetic systems. Standardized data sets generated using genetic simulation are essential for the development and application of novel analytical tools in genetic epidemiology studies. With continuing advances in high-throughput genomic technologies and generation and analysis of larger, more complex data sets, there is a need for updating current approaches in genetic simulation modeling. To provide a forum to address current and emerging challenges in this area, the National Cancer Institute (NCI) sponsored a workshop, entitled "Genetic Simulation Tools for Post-Genome Wide Association Studies of Complex Diseases" at the National Institutes of Health (NIH) in Bethesda, Maryland on March 11-12, 2014. The goals of the workshop were to (1) identify opportunities, challenges, and resource needs for the development and application of genetic simulation models; (2) improve the integration of tools for modeling and analysis of simulated data; and (3) foster collaborations to facilitate development and applications of genetic simulation. During the course of the meeting, the group identified challenges and opportunities for the science of simulation, software and methods development, and collaboration. This paper summarizes key discussions at the meeting, and highlights important challenges and opportunities to advance the field of genetic simulation.

Preliminary estimates of SEER cancer incidence for 2013.

BACKGROUND: This article presents a first look at rates and trends for cases in the Surveillance, Epidemiology, and End Results (SEER) program diagnosed through 2013 using the February 2015 submission, and a validation of rates and trends from the February 2014 submission using the subsequent November 2014 submission. To the authors' knowledge, this is the second time SEER has published trends based on the early February submission. Three new cancer sites were added: cervix, thyroid, and liver/ intrahepatic bile duct. METHODS: A reporting delay model adjusted for the undercount of cases, which is substantially larger for the February than the subsequent November submission, was used. Joinpoint regression methodology was used to assess trends. Delay-adjusted rates and trends were checked to assess validity between the February and November 2014 submissions. RESULTS: The validation of rates and trends from the February and November 2014 submissions demonstrated even better agreement than the previously reported comparison between the February and November 2013 submissions, thereby affording additional confidence that the delay-adjusted February submission data can be used to produce valid estimates of incidence trends. Trends for cases diagnosed through 2013 revealed more rapid declines in female colon and rectal cancer and prostate cancer. A plateau in female melanoma trends and a slowing of the increases in thyroid cancer and male liver/intrahepatic bile duct cancer trends were observed. CONCLUSIONS: Analysis of early cancer data submissions can provide a preliminary indication of differences in incidence trends with an additional year of data. Although the delay adjustment correction adjusts for underreporting of cases, caution should be exercised when interpreting the results in this early submission. Cancer 2016;122:1579-87. © 2016 American Cancer Society.

Early estimates of SEER cancer incidence for 2012: Approaches, opportunities, and cautions for obtaining preliminary estimates of cancer incidence.

BACKGROUND: The National Cancer Institute's Surveillance, Epidemiology, and End Results (SEER) program collects and publishes population-based cancer incidence data from registries covering approximately 28% (seer.cancer.gov/registries/data.html) of the US population. SEER incidence rates are released annually in April from data submitted the prior November. The time needed to identify, consolidate, clean, and submit data requires the latest diagnosis year included to be 3 years before release. Approaches, opportunities, and cautions for an earlier release of data based on a February submission are described. METHODS: First, cases submitted in February for the latest diagnosis year represented 92% to 98% of those in the following November submission. A reporting delay model was used to statistically adjust counts in recent diagnosis years for cases projected in the future. February submissions required larger adjustment factors than November submissions. Second, trends were checked to assess the validity. RESULTS: Most cancer sites had similar annual percent change (APC) trends for February and November 2013. Male colon and rectum cancer and female lung and bronchus cancer showed an acceleration in declining APC trends only in February. Average annual percent change (AAPC) trends for the 2 submissions were similar for all sites. CONCLUSIONS: For the first time, preliminary 2012 incidence rates, based on February submissions, are provided. An accelerated decline starting in 2008 for male colon and rectum cancer rates and male lung cancer rates did not persist when 2012 data were added. An earlier release of SEER data is possible. Caution must be exercised when one is interpreting changing trends. Use of the more conservative AAPC is advised.

A powerful method for combining P-values in genomic studies.

After genetic regions have been identified in genomewide association studies (GWAS), investigators often follow up with more targeted investigations of specific regions. These investigations typically are based on single nucleotide polymorphisms (SNPs) with dense coverage of a region. Methods are thus needed to test the hypothesis of any association in given genetic regions. Several approaches for combining P-values obtained from testing individual SNP hypothesis tests are available. We recently proposed a sequential procedure for testing the global null hypothesis of no association in a region. When this global null hypothesis is rejected, this method provides a list of significant hypotheses and has weak control of the family-wise error rate. In this paper, we devise a permutation-based version of the test that accounts for correlations of tests based on SNPs in the same genetic region. Based on simulated data, the method has correct control of the type I error rate and higher or comparable power to other tests.

Genetic Simulation Resources: a website for the registration and discovery of genetic data simulators.

SUMMARY: Many simulation methods and programs have been developed to simulate genetic data of the human genome. These data have been widely used, for example, to predict properties of populations retrospectively or prospectively according to mathematically intractable genetic models, and to assist the validation, statistical inference and power analysis of a variety of statistical models. However, owing to the differences in type of genetic data of interest, simulation methods, evolutionary features, input and output formats, terminologies and assumptions for different applications, choosing the right tool for a particular study can be a resource-intensive process that usually involves searching, downloading and testing many different simulation programs. Genetic Simulation Resources (GSR) is a website provided by the National Cancer Institute (NCI) that aims to help researchers compare and choose the appropriate simulation tools for their studies. This website allows authors of simulation software to register their applications and describe them with well-defined attributes, thus allowing site users to search and compare simulators according to specified features. AVAILABILITY: http://popmodels.cancercontrol.cancer.gov/gsr.

Clustering of trend data using joinpoint regression models.

In this paper, we propose methods to cluster groups of two-dimensional data whose mean functions are piecewise linear into several clusters with common characteristics such as the same slopes. To fit segmented line regression models with common features for each possible cluster, we use a restricted least squares method. In implementing the restricted least squares method, we estimate the maximum number of segments in each cluster by using both the permutation test method and the Bayes information criterion method and then propose to use the Bayes information criterion to determine the number of clusters. For a more effective implementation of the clustering algorithm, we propose a measure of the minimum distance worth detecting and illustrate its use in two examples. We summarize simulation results to study properties of the proposed methods and also prove the consistency of the cluster grouping estimated with a given number of clusters. The presentation and examples in this paper focus on the segmented line regression model with the ordered values of the independent variable, which has been the model of interest in cancer trend analysis, but the proposed method can be applied to a general model with design points either ordered or unordered.

Next generation analytic tools for large scale genetic epidemiology studies of complex diseases.

Over the past several years, genome-wide association studies (GWAS) have succeeded in identifying hundreds of genetic markers associated with common diseases. However, most of these markers confer relatively small increments of risk and explain only a small proportion of familial clustering. To identify obstacles to future progress in genetic epidemiology research and provide recommendations to NIH for overcoming these barriers, the National Cancer Institute sponsored a workshop entitled "Next Generation Analytic Tools for Large-Scale Genetic Epidemiology Studies of Complex Diseases" on September 15-16, 2010. The goal of the workshop was to facilitate discussions on (1) statistical strategies and methods to efficiently identify genetic and environmental factors contributing to the risk of complex disease; and (2) how to develop, apply, and evaluate these strategies for the design, analysis, and interpretation of large-scale complex disease association studies in order to guide NIH in setting the future agenda in this area of research. The workshop was organized as a series of short presentations covering scientific (gene-gene and gene-environment interaction, complex phenotypes, and rare variants and next generation sequencing) and methodological (simulation modeling and computational resources and data management) topic areas. Specific needs to advance the field were identified during each session and are summarized.

Interpreting cancer incidence trends: challenges due to the COVID-19 pandemic.

The considerable deficit in cancer diagnoses in 2020 due to COVID-19 pandemic disruptions in health care can pose challenges in the estimation and interpretation of long-term cancer trends. Using Surveillance, Epidemiology, and End Results (SEER) (2000-2020) data, we demonstrate that inclusion of the 2020 incidence rates in joinpoint models to estimate trends can result in a poorer fit to the data and less accurate or less precise trend estimates, providing challenges in the interpretation of the estimates as a cancer control measure. To measure the decline in 2020 relative to 2019 cancer incidence rates, we used the percent change of rates in 2020 compared with 2019. Overall, SEER cancer incidence rates dropped approximately 10% in 2020, but for thyroid cancer the decrease was as large as 18% after adjusting for reporting delay. The 2020 SEER incidence data are available in all SEER released products, except for joinpoint estimates of trends and lifetime risk of developing cancer.

Data-driven choice of a model selection method in joinpoint regression.

Selecting the number of change points in segmented line regression is an important problem in trend analysis, and there have been various approaches proposed in the literature. We first study the empirical properties of several model selection procedures and propose a new method based on two Schwarz type criteria, a classical Bayes Information Criterion (BIC) and the one with a harsher penalty than BIC (BIC3). The proposed rule is designed to use the former when effect sizes are small and the latter when the effect sizes are large and employs the partial R2 to determine the weight between BIC and BIC3. The proposed method is computationally much more efficient than the permutation test procedure that has been the default method of Joinpoint software developed for cancer trend analysis, and its satisfactory performance is observed in our simulation study. Simulations indicate that the proposed method performs well in keeping the probability of correct selection at least as large as that of BIC3, whose performance is comparable to that of the permutation test procedure, and improves BIC3 when it performs worse than BIC. The proposed method is applied to the U.S. prostate cancer incidence and mortality rates.