Imaging polarimetry through metasurface polarization gratings.

Metasurfaces-subwavelength arrays of phase-shifting elements-present new possibilities for polarization optics and polarimetry. In particular, a periodic, polarization-sensitive metasurface diffraction grating can enable full-Stokes imaging polarimetry with a single polarization-sensitive component. In this work, we show that a suitably-designed metasurface grating can serve as a polarimetric "attachment" to an existing intensity-only imaging system, converting it into one capable of full-Stokes imaging polarimetry. Design rules and tradeoffs governing this adaptation are described and demonstrated using a machine vision imaging system as an example.

Radio frequency transmitter based on a laser frequency comb.

Since the days of Hertz, radio transmitters have evolved from rudimentary circuits emitting around 50 MHz to modern ubiquitous Wi-Fi devices operating at gigahertz radio bands. As wireless data traffic continues to increase, there is a need for new communication technologies capable of high-frequency operation for high-speed data transfer. Here, we give a proof of concept of a compact radio frequency transmitter based on a semiconductor laser frequency comb. In this laser, the beating among the coherent modes oscillating inside the cavity generates a radio frequency current, which couples to the electrodes of the device. We show that redesigning the top contact of the laser allows one to exploit the internal oscillatory current to drive a dipole antenna, which radiates into free space. In addition, direct modulation of the laser current permits encoding a signal in the radiated radio frequency carrier. Working in the opposite direction, the antenna can receive an external radio frequency signal, couple it to the active region, and injection lock the laser. These results pave the way for applications and functionality in optical frequency combs, such as wireless radio communication and wireless synchronization to a reference source.

Frequency-Modulated Combs Obey a Variational Principle.

Laser dynamics encompasses universal phenomena that can be encountered in many areas of physics, such as bifurcation and chaos, mode competition, resonant nonlinearities, and synchronization-or locking-of oscillators. When a locking process occurs in a multimode laser, an optical frequency comb is produced, which is an optical spectrum consisting of equidistant modes with a fixed phase relationship. Describing the formation of self-starting frequency combs in terms of fundamental laser equations governing the field inside the cavity does not allow one, in general, to grasp how the laser synchronizes its modes. Our finding is that, in a particular class of lasers where the output is frequency modulated with small or negligible intensity modulation, a greatly simplified description of self-locking exists. We show that in quantum cascade lasers-solid-state representatives of these lasers characterized by an ultrashort carrier relaxation time-the frequency comb formation obeys a simple variational principle, which was postulated over 50 years ago and relies on the maximization of the laser output power. The conditions for the breakdown of this principle are also experimentally identified, shedding light on the behavior of many different types of lasers, such as dye, diode, and other cascade lasers. This discovery reveals that the formation of frequency-modulated combs is an elegant example of an optimization problem solved by a physical system.

The harmonic state of quantum cascade lasers: origin, control, and prospective applications [Invited].

The recently discovered ability of the quantum cascade laser to produce a harmonic frequency comb has attracted new interest in these devices for both applications and fundamental laser physics. In this review we present an extensive experimental phenomenology of the harmonic state, including its appearance in mid-infrared and terahertz quantum cascade lasers, studies of its destabilization induced by delayed optical feedback, and the assessment of its frequency comb nature. A theoretical model explaining its origin as due to the mutual interaction of population gratings and population pulsations inside the laser cavity will be described. We explore different approaches to control the spacing of the harmonic state, such as optical injection seeding and variation of the device temperature. Prospective applications of the harmonic state include microwave and terahertz generation, picosecond pulse generation in the mid-infrared, and broadband spectroscopy.

Extraordinary transmission in optical Helmholtz resonators.

Optical Helmholtz resonators (OHRs) have been adapted from acoustics designs for light absorbing structures, exhibiting extreme light confinement. Here, extraordinary transmission of light is theoretically demonstrated through symmetric OHRs, comprising a cavity with two λ/500 narrow slits on either side. This device has appealing features to act as a spectral bandpass filter in the context of multispectral imaging, in particular its high angular tolerance because of the localized nature of the resonance. Besides, the cavity can be modeled as an inductor and the two slits can be modeled as capacitors, the whole design acting as a LC circuit thus preventing any harmonic features.

Electromagnetic modelization of spherical focusing on a one-dimensional grating thanks to a conical B-spline modal method.

Focusing light onto nanostructures thanks to spherical lenses is a first step in enhancing the field and is widely used in applications. Nonetheless, the electromagnetic response of such nanostructures, which have subwavelength patterns, to a focused beam cannot be described by the simple ray tracing formalism. Here, we present a method for computing the response to a focused beam, based on the B-spline modal method adapted to nanostructures in conical mounting. The eigenmodes are computed in each layer for both polarizations and are then combined for the computation of scattering matrices. The simulation of a Gaussian focused beam is obtained thanks to a truncated decomposition into plane waves computed on a single period, which limits the computation burden.

Accurately Measuring Molecular Rotational Spectra in Excited Vibrational Modes.

Although gas phase rotational spectroscopy is a mature field for which millions of rotational spectral lines have been measured in hundreds of molecules with sub-MHz accuracy, it remains a challenge to measure these rotational spectra in excited vibrational modes with the same accuracy. Recently, it was demonstrated that virtually any rotational transition in excited vibrational modes of most molecules may be made to lase when pumped by a continuously tunable quantum cascade laser (QCL). Here, we demonstrate how an infrared QCL may be used to enhance absorption strength or induce lasing of terahertz rotational transitions in highly excited vibrational modes in order to measure their frequencies more accurately. To illustrate the concepts, we used a tunable QCL to excite v3 R-branch transitions in N2O and either enhanced absorption or induced lasing on 20 v3 rotational transitions, whose frequencies between 299 and 772 GHz were then measured using either heterodyne or modulation spectroscopy. The spectra were fitted to obtain the rotational constants B3 and D3, which reproduce the measured spectra to within the experimental uncertainty of ± 5 kHz. We then show how this technique may be generalized by estimating the threshold power to make any rotational transition lase in any N2O vibrational mode.

Matrix Fourier optics enables a compact full-Stokes polarization camera.

Recent developments have enabled the practical realization of optical elements in which the polarization of light may vary spatially. We present an extension of Fourier optics-matrix Fourier optics-for understanding these devices and apply it to the design and realization of metasurface gratings implementing arbitrary, parallel polarization analysis. We show how these gratings enable a compact, full-Stokes polarization camera without standard polarization optics. Our single-shot polarization camera requires no moving parts, specially patterned pixels, or conventional polarization optics and may enable the widespread adoption of polarization imaging in machine vision, remote sensing, and other areas.

Widely tunable compact terahertz gas lasers.

The terahertz region of the electromagnetic spectrum has been the least utilized owing to inadequacies of available sources. We introduce a compact, widely frequency-tunable, extremely bright source of terahertz radiation: a gas-phase molecular laser based on rotational population inversions optically pumped by a quantum cascade laser. By identifying the essential parameters that determine the suitability of a molecule for a terahertz laser, almost any rotational transition of almost any molecular gas can be made to lase. Nitrous oxide is used to illustrate the broad tunability over 37 lines spanning 0.251 to 0.955 terahertz, each with kilohertz linewidths. Our analysis shows that laser lines spanning more than 1 terahertz with powers greater than 1 milliwatt are possible from many molecular gases pumped by quantum cascade lasers.

Watt-Level Continuous-Wave Emission from a Bifunctional Quantum Cascade Laser/Detector.

Bifunctional active regions, capable of light generation and detection at the same wavelength, allow a straightforward realization of the integrated mid-infrared photonics for sensing applications. Here, we present a high performance bifunctional device for 8 µm capable of 1 W single facet continuous wave emission at 15 °C. Apart from the general performance benefits, this enables sensing techniques which rely on continuous wave operation, for example, heterodyne detection, to be realized within a monolithic platform and demonstrates that bifunctional operation can be realized at longer wavelength, where wavelength matching becomes increasingly difficult and that the price to be paid in terms of performance is negligible. In laser operation, the device has the same or higher efficiency compared to the best lattice-matched QCLs without same wavelength detection capability, which is only 30% below the record achieved with strained material at this wavelength.

Phase I study of intravenous vascular endothelial growth factor trap, aflibercept, in patients with advanced solid tumors.

PURPOSE: Vascular endothelial growth factor (VEGF) Trap (aflibercept) is an angiogenesis inhibitor comprising portions of the extracellular domains of human VEGF receptors 1 and 2 fused to the Fc portion of human immunoglobulin G. This phase I study was designed to evaluate the safety, pharmacokinetics, and pharmacodynamics of VEGF Trap administered intravenously (IV) every 2 weeks. PATIENTS AND METHODS: Patients with refractory solid tumors or non-Hodgkin's lymphoma with adequate organ function were eligible. Pharmacokinetic/pharmacodynamic markers included measurement of plasma VEGF bound to VEGF Trap and free VEGF Trap. Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) was incorporated to measure the biologic effects of the drug on tumor vascularity and permeability. RESULTS: The study enrolled 47 patients at doses ranging from 0.3 to 7.0 mg/kg IV every 2 weeks. Dose-limiting toxicities were rectal ulceration and proteinuria at the 7.0 mg/kg dose. Other mechanism-specific toxicities included hypertension. On the basis of these observations and on pharmacokinetics, the recommended phase II dose of VEGF Trap as a single agent is 4 mg/kg every 2 weeks. Three RECIST (Response Evaluation Criteria in Solid Tumors) -defined partial responses were observed, one at the 3.0 mg/kg and two at the 7.0 mg/kg dose level. Maximum plasma concentration of free VEGF Trap increased proportionally with dose. Maximal VEGF-bound VEGF Trap complex levels were reached at doses > or = 2.0 mg/kg. Changes in volume transfer constant measured by DCE-MRI at baseline and at 24 hours after administration indicate a possible dose-related change in this pharmacodynamic marker. CONCLUSION: IV VEGF Trap was well tolerated at the dose levels tested. Pharmacodynamic and pharmacokinetic markers were indicative of VEGF blockade.

Reliable anticoagulation with enoxaparin in patients undergoing percutaneous coronary intervention: The pharmacokinetics of enoxaparin in PCI (PEPCI) study.

The objective of this study was to evaluate the pharmacokinetic response to intravenous (IV) enoxaparin given 8-12 hr after subcutaneous (SC) dosing in patients undergoing percutaneous coronary intervention (PCI). Fifty-five patients received SC enoxaparin (1 mg/kg every 12 hr) followed by an IV bolus (0.3 mg/kg) 8-12 hr after the last SC dose, at the start of PCI or during catheterization. Anti-Xa levels were within the target range in 98% of patients 2-8 hr after the last SC dose, in 96% of patients following the IV bolus, and in 91% of patients for a further 2 hr. Subcutaneous enoxaparin (1 mg/kg every 12 hr) provides sufficient anti-Xa levels for PCI 2-8 hr after the last dose. An additional 0.3 mg/kg enoxaparin dose given IV 8-12 hr after the last SC dose reliably maintains anti-Xa levels within the target for at least 2 additional hr.