RESUMEN
This paper suggests a new method to predict the Remaining Useful Life (RUL) of rolling bearings based on Long Short Term Memory (LSTM), in order to obtain the degradation condition of the rolling bearings and realize the predictive maintenance. The approach is divided into three parts: the first part is the clustering to detect the damage state by the density-based spatial clustering of applications with noise. The second one is the health indicator construction which could give a better reflection of the bearing degradation tendency and is selected as the input for the prediction model. In the third part of the RUL prediction, the LSTM approach is employed to improve the accuracy of the prediction. The rationale of this work is to combine the two methods-the density-based spatial clustering of applications with noise and LSTM-to identify the abnormal state in rolling bearings, then estimate the RUL. The suggested method is confirmed by experimental data of bearing life cycle, and the RUL prediction results of the model LSTM are compared with the nonlinear au-regressive model with exogenous input model. In addition, the constructed health indicator is compared with the spectral kurtosis feature. The results demonstrated that the suggested method is more appropriate than the nonlinear au-regressive model with exogenous input model for the prediction of bearing RUL.
RESUMEN
BACKGROUND: Metabolic syndrome (MetS) is a cluster of metabolic abnormalities that increases the cardiovascular risk. Regular physical exercise can promote benefits, but the MetS individuals are demotivated to perform it. Thus, new possibilities are important as an alternative intervention. The whole-body vibration can be considered an exercise modality and would be a safe and low-cost strategy to improve functional parameters of individuals in different clinical conditions. The aim of this exploratory study was to assess effects of whole-body vibration on functional parameters of MetS individuals. The hypothesis of this work was that the whole-body vibration could improve the functionality of MetS individuals. METHODS: Twenty-two individuals performed the intervention. The vibration frequency varied from 5 to 14 Hz and the peak-to-peak displacements, from 2.5 to 7.5 mm. Each session consisted of one minute-bout of working time followed by a one minute-bout of passive rest in each peak-to-peak displacement for three-times. The whole-body vibration protocol was applied twice per week for 5 weeks. Data from the trunk flexion, gait speed, sit-to-stand test and handgrip strength were collected. Physiological parameters (blood pressure and heart rate) were also evaluated. The Wilcoxon Rank test and Student t-test were used. RESULTS: No significant changes (p > 0.05) were observed in physiological parameters (arterial blood pressure and heart rate). Significant improvements were found in trunk flexion (p = 0.01), gait speed (p = 0.02), sit-to-stand test (p = 0.005) and handgrip strength (p = 0.04) after the whole-body vibration. CONCLUSIONS: In conclusion, whole-body vibration may induce biological responses that improve functional parameters in participants with MetS without interfering in physiological parameters, comparing before and after a 5-week whole-body vibration protocol. TRIAL REGISTRATION: Register in the Registro Brasileiro de Ensaios Clínicos (ReBEC) with the number RBR 2bghmh (June 6th, 2016) and UTN: U1111-1181-1177. (virgula).
Asunto(s)
Terapia por Ejercicio , Síndrome Metabólico/terapia , Vibración , Adaptación Fisiológica/fisiología , Anciano , Estudios de Factibilidad , Femenino , Fuerza de la Mano/fisiología , Humanos , Masculino , Síndrome Metabólico/fisiopatología , Persona de Mediana Edad , Equilibrio Postural/fisiología , Resultado del TratamientoRESUMEN
Hintzy, F, Gregoire, N, Samozino, P, Chiementin, X, Bertucci, W, and Rossi, J. Effect of thigh-compression shorts on muscle activity and soft-tissue vibration during cycling. J Strength Cond Res 33(8): 2145-2152, 2019-This study examined the effects of different levels of thigh compression (0, 2, 6, and 15 mm Hg) in shorts on both vibration and muscle activity of the thigh during cycling with superimposed vibrations. Twelve healthy males performed a 18-minute rectangular cycling test per shorts condition (randomized cross-over design) on a specifically designed vibrating cycloergometer. Each test was composed of 2 intensity levels (moderate then high) and 3 vibration frequencies of 18.3, 22.4, and 26.3 Hz, corresponding to cadences of 70, 85, and 100 rpm, respectively. Muscle vibrations were measured with 2 triaxial accelerometers located before and on the lower-body compression garment, to quantify, respectively, the input and output vibrations, and vastus lateralis muscle activity was measured using surface electromyography. Both vibration and electromyography signals were measured throughout the tests and quantified using root-mean-square analyses. The study showed that the use of a thigh-compression shorts at 6-15 mm Hg significantly reduced both the vibration transmissibility to the thigh and the muscle activity, with higher effect size at higher superimposed vibrations. The thigh-compression shorts garment therefore seems to be 1 way to dampen vibrations transmitted to the cyclists and then to reduce the negative consequences of these vibrations on muscles.
Asunto(s)
Ciclismo/fisiología , Vendajes de Compresión , Músculo Esquelético/fisiología , Muslo/fisiología , Vibración , Adulto , Electromiografía , Humanos , Masculino , Fenómenos Fisiológicos Musculoesqueléticos , Modalidades de Fisioterapia , Músculo Cuádriceps/fisiología , Adulto JovenRESUMEN
Vibration in cycling has been proved to have undesirable effects over health, comfort and performance of the rider. In this study, 15 participants performed eight 6-min sub-maximal pedalling exercises at a constant power output (150W) and pedalling cadence (80 RPM) being exposed to vibration at different frequencies (20, 30, 40, 50, 60, 70 Hz) or without vibration. Oxygen uptake (VO2), heart rate (HR), surface EMG activity of seven lower limb muscles (GMax, RF, BF, VM, GAS, SOL and TA) and 3-dimentional accelerations at ankle, knee and hip were measured during the exercises. To analyse the dynamic response, the influence of the pedalling movement was taken into account. The results show that there was not significant influence of vibrations on HR and VO2 during this pedalling exercise. However, muscular activity presents a significant increase with the presence of vibration that is influenced by the frequency, but this increase was very low (< 1%). Also, the dynamic response shows an influence of the frequency as well as an influence of the different parts of the pedalling cycle. Those results help to explain the effects of vibration on the human body and the influence of the rider/bike interaction in those effects.
Asunto(s)
Ciclismo/fisiología , Extremidad Inferior/fisiología , Músculo Esquelético/fisiología , Vibración , Aceleración , Acelerometría , Adulto , Electromiografía , Frecuencia Cardíaca/fisiología , Humanos , Masculino , Movimiento/fisiología , Consumo de Oxígeno/fisiología , RespiraciónRESUMEN
The musculo-skeletal response of athletes to various activities during training exercises has become a critical issue in order to optimize their performance and minimize injuries. However, dynamic and kinematic measures of an athlete's activity are generally limited by constraints in data collection and technology. Thus, the choice of reliable and accurate sensors is crucial for gathering data in indoor and outdoor conditions. The aim of this study is to validate the use of the accelerometer of a high sampling rate ( 1344 Hz ) Inertial Measurement Unit (IMU) in the frame of running activities. To this end, two validation protocols are imposed: a classical one on a shaker, followed by another one during running, the IMU being attached to a test subject. For each protocol, the response of the IMU Accelerometer (IMUA) is compared to a calibrated industrial accelerometer, considered as the gold standard for dynamic and kinematic data collection. The repeatability, impact of signal frequency and amplitude (on shaker) as well as the influence of speed (while running) are investigated. Results reveal that the IMUA exhibits good repeatability. Coefficient of Variation CV is 1 % 8.58 ± 0.06 m / s 2 on the shaker and 3 % 26.65 ± 0.69 m / s 2 while running. However, the shaker test shows that the IMUA is affected by the signal frequency (error exceeds 10 % beyond 80 Hz ), an observation confirmed by the running test. Nevertheless, the IMUA provides a reliable measure in the range 0-100 Hz, i.e., the most relevant part in the energy spectrum over the range 0-150 Hz during running. In our view, these findings emphasize the validity of IMUs for the measurement of acceleration during running.
Asunto(s)
Carrera , Aceleración , Atletas , Fenómenos Biomecánicos , HumanosRESUMEN
Cyclists are exposed for a long period to continuous vibrations. When a muscle is exposed to vibration, its efficiency decreases, the onset of fatigue occurs sooner, and the comfort of the cyclist is reduced. This study characterised the vastus lateralis (VL) soft tissue vibrations for different input frequencies and different pedalling phases. Ten cyclists were recruited to pedal at 55, 70, 85, and 100 rpm on a vibrating cycle ergometer that induced vibrations at frequencies ranging from 14.4 Hz (55 rpm) to 26.3 Hz (100 rpm). The VL vibration amplitude was quantified with a continuous wavelet transform and expressed as a function of the crank angle. The pedalling cycle was split into four phases (downstroke, backstroke, upstroke, and overstroke) to express the mean vibration amplitude and frequency of each phase. Statistical analysis depicted that VL vibration frequency increased with the pedalling cadence and that the VL was exposed to up to 50% more vibration amplitudes during the downstroke phase at a slow cadence. The increase in the pedal vibration frequency, a higher vibration transmission due to greater normal force on the pedal, and strong activation of the VL during the downstroke phase were discussed to explain these results.
Asunto(s)
Consumo de Oxígeno , Vibración , Humanos , Consumo de Oxígeno/fisiología , Fenómenos Biomecánicos , Ciclismo/fisiología , Músculo Cuádriceps/fisiología , Músculo Esquelético/fisiologíaRESUMEN
Defining relationships between running mechanisms and fatigue can be a major asset for optimising training. This article proposes a biomechanical model of time to exhaustion according to indicators derived from accelerometry data collected from the body. Ten volunteers were recruited for this study. The participants were equipped with 3 accelerometers: on the right foot, at the tibia and at the L4-L5 lumbar spine. A running test was performed on a treadmill at 13.5 km/h until exhaustion. Thirty-one variables were deployed during the test. Multiple linear regressions were calculated to explain the time to exhaustion from the indicators calculated on the lumbar, tibia and foot individually and simultaneously. Time to exhaustion was predicted for simultaneous measurement points with r 2 = 0.792 and 21 indicators; for the lumbar with r 2 = 0.568 and 11 indicators; for the tibia with r 2 = 558 and 11 indicators; and for the foot with r 2 = 0.626 and 12 indicators. This study allows the accurate modelling of the time to exhaustion during a running-based test using indicators from accelerometer measurements. The individual models highlight that the location of the measurement point is important and that each location provides different information. Future studies should focus on homogeneous populations to improve predictions and errors.
Asunto(s)
Acelerometría/instrumentación , Resistencia Física/fisiología , Carrera/fisiología , Dispositivos Electrónicos Vestibles , Adulto , Fenómenos Biomecánicos/fisiología , Femenino , Pie , Humanos , Modelos Lineales , Región Lumbosacra , Masculino , Modelos Biológicos , Reproducibilidad de los Resultados , Tibia , Factores de TiempoRESUMEN
Amplified by the development of new technologies, the interest in personal performance has been growing over the last years. Acceleration has proved to be an easy variable to collect, and was addressed in several works. However, few of them evaluate the effect of running speed on relevant indicators. The influence of the sensors location on the measurement is rarely studied as well. This study is dedicated to investigating the effect of running speed on acceleration measured at three different positions on 18 volunteers. All participants were equipped with three inertial measurement units: on the dorsal surface of the right foot (Fo), at the centre of gravity of the tibia (Ti), at the L4-L5 lumbar (Lu). The test was performed on a treadmill at nine randomised speeds between 8 and 18 km/h. Ten accelerometric variables were calculated. Linear regressions were used to calculate speed from the indicators calculated on (Lu), (Ti), (Fo). Indicators associated to signal energy were highly correlated with speed (r2>0.90). Median frequency appears to be affected by the frequency resolution. Finally, the measurement points closest to the impact zone result in the most correlated indicators.
Asunto(s)
Acelerometría/métodos , Sistemas Microelectromecánicos/métodos , Carrera/fisiología , Dispositivos Electrónicos Vestibles , Aceleración , Adulto , Fenómenos Biomecánicos , Femenino , Pie , Humanos , Región Lumbosacra , Masculino , TibiaRESUMEN
Previous studies have demonstrated the acceleration signal presents a typical running signature, which allows for the extraction of reliable information. However, few studies have focused on the exhaustion-induced variability of the acceleration signature during running. The present study included 10 participants who ran at a constant speed on a treadmill until exhaustion. The participants were equipped with three accelerometers, located at the lumbar spine, tibia, and foot. The results showed that all the participants kept a constant pace throughout the test (coefficient of variation <5%). Similarities between acceleration signatures were observed using the coefficient of multiple correlation. For the longitudinal axis of the lumbar spine, the longitudinal axis of the tibia, and the anteroposterior axis of the tibia, running signatures were not affected by exhaustion (coefficient of multiple correlation >0.8). For all the other axes, the signature was impacted within and between the states of exhaustion. Signatures were particularly different for the foot sensors, which makes it difficult to use to extract reliable information. The results showed that the coefficient of multiple correlation allowed the quantification of the variability of the running signature, and that each axis and measuring point varied in how they were influenced by exhaustion.
RESUMEN
BACKGROUND: The use of surface electromyography (sEMG) to evaluate muscle activation when executing whole body vibration exercises (WBVE) in studies provide neuromuscular findings, in healthy and diseased populations. OBJECTIVES: Perform a systematic review of the effects of WBVE by sEMG of lower limbs in non-healthy populations. METHODS: The search using the defined keywords was performed in PubMed, PEDRo and EMBASE databases by three independent researchers. Applying the PRISMA statement several studies were selected according to eligibility criteria and organized for the review. Full papers were included if they described effects of WBVE for the treatment of illnesses, evaluated by sEMG of lower limbs independently on the year of the publication; in comparison or associated with other treatment and evaluation techniques. RESULTS: Seven publications were selected; two in spinal cord injury patients, one in Friedreich's ataxia patients, three in stroke patients and one study in breast cancer survivors. Reported effects of WBV in were muscle activation by sEMG and also on strength, blood flow and exercise resistance; even in paretic limbs. CONCLUSION: By the use of sEMG it was verified that WBVE elicits muscle activation in diseased population. These results may lead to the definition of exercise protocols to maintain or increase muscular activation. However, due to the heterogeneity of methods among studies, there is currently no consensus on the sEMG signal processing. These strategies might also induce effects on muscle strength, balance and flexibility in these and other illnesses.
Asunto(s)
Extremidad Inferior/inervación , Fuerza Muscular/fisiología , Enfermedades Neuromusculares/rehabilitación , Modalidades de Fisioterapia , Vibración/uso terapéutico , Bases de Datos Bibliográficas , Electromiografía , Femenino , Humanos , Masculino , Enfermedades Neuromusculares/etiologíaRESUMEN
Whole body vibration (WBV) is used as a training method but its physical risk is not yet clear. Hence, the aim of this study is to assess the exposure to WBV by a measure of acceleration at the lower limb under dynamic and static postural conditions. The hypothesis of this paper is that this assessment is influenced by the frequency, position, and movement of the body. Fifteen healthy males are exposed to vertical sinusoidal vibration at different frequencies (20-60 Hz), while adopting three different static postures (knee extension angle: 180°, 120° and 90°) or performing a dynamic half-squat exercise. Accelerations at input source and at three joints of the lower limb (ankle, knee, and hip) are measured using skin-mounted accelerometers. Acceleration values (g) in static conditions show a decrease in the vibrational dose when it is measured at a more proximal location in the lower extremity. The results of the performed statistical test show statistically significant differences (p < 0.05) in the transmissibility values caused by the frequency, the position, and to the presence of the movement and its direction at the different conditions. The results confirm the initial hypothesis and justify the importance of a vibration assessment in dynamic conditions.