Gold nanoparticles as multimodality imaging agents for brain gliomas.

BACKGROUND: Nanoparticles can be used for targeted drug delivery, in particular for brain cancer therapy. However, this requires a detailed analysis of nanoparticles from the associated microvasculature to the tumor, not easy because of the required high spatial resolution. The objective of this study is to demonstrate an experimental solution of this problem, based in vivo and post-mortem whole organ imaging plus nanoscale 3-dimensional (3D) X-ray microscopy. RESULTS: The use of gold nanoparticles (AuNPs) as contrast agents paved the way to a detailed high-resolution three dimensional (3D) X-ray and fluorescence imaging analysis of the relation between xenografted glioma cells and the tumor-induced angiogenic microvasculature. The images of the angiogenic microvessels revealed nanoparticle leakage. Complementary tests showed that after endocytotic internalization fluorescent AuNPs allow the visible-light detection of cells. CONCLUSIONS: AuNP-loading of cells could be extended from the case presented here to other imaging techniques. In our study, they enabled us to (1) identify primary glioma cells at inoculation sites in mice brains; (2) follow the subsequent development of gliomas. (3) Detect the full details of the tumor-related microvasculature; (4) Finding leakage of AuNPs from the tumor-related vasculature, in contrast to no leakage from normal vasculature.

FTIR spectro-imaging of collagen scaffold formation during glioma tumor development.

Evidence has recently emerged that solid and diffuse tumors produce a specific extracellular matrix (ECM) for division and diffusion, also developing a specific interface with microvasculature. This ECM is mainly composed of collagens and their scaffolding appears to drive tumor growth. Although collagens are not easily analyzable by UV-fluorescence means, FTIR imaging has appeared as a valuable tool to characterize collagen contents in tissues, specially the brain, where ECM is normally devoid of collagen proteins. Here, we used FTIR imaging to characterize collagen content changes in growing glioma tumors. We could determine that C6-derived solid tumors presented high content of triple helix after 8-11 days of growth (typical of collagen fibrils formation; 8/8 tumor samples; 91 % of total variance), and further turned to larger α-helix (days 12-15; 9/10 of tumors; 94 % of variance) and ß-turns (day 18-21; 7/8 tumors; 97 % of variance) contents, which suggest the incorporation of non-fibrillar collagen types in ECM, a sign of more and more organized collagen scaffold along tumor progression. The growth of tumors was also associated to the level of collagen produced (P < 0.05). This study thus confirms that collagen scaffolding is a major event accompanying the angiogenic shift and faster tumor growth in solid glioma phenotypes.

Gold nanoparticles as high-resolution X-ray imaging contrast agents for the analysis of tumor-related micro-vasculature.

BACKGROUND: Angiogenesis is widely investigated in conjunction with cancer development, in particular because of the possibility of early stage detection and of new therapeutic strategies. However, such studies are negatively affected by the limitations of imaging techniques in the detection of microscopic blood vessels (diameter 3-5 µm) grown under angiogenic stress. We report that synchrotron-based X-ray imaging techniques with very high spatial resolution can overcome this obstacle, provided that suitable contrast agents are used. RESULTS: We tested different contrast agents based on gold nanoparticles (AuNPs) for the detection of cancer-related angiogenesis by synchrotron microradiology, microtomography and high resolution X-ray microscopy. Among them only bare-AuNPs in conjunction with heparin injection provided sufficient contrast to allow in vivo detection of small capillary species (the smallest measured lumen diameters were 3-5 µm). The detected vessel density was 3-7 times higher than with other nanoparticles. We also found that bare-AuNPs with heparin allows detecting symptoms of local extravascular nanoparticle diffusion in tumor areas where capillary leakage appeared. CONCLUSIONS: Although high-Z AuNPs are natural candidates as radiology contrast agents, their success is not guaranteed, in particular when targeting very small blood vessels in tumor-related angiography. We found that AuNPs injected with heparin produced the contrast level needed to reveal--for the first time by X-ray imaging--tumor microvessels with 3-5 µm diameter as well as extravascular diffusion due to basal membrane defenestration. These results open the interesting possibility of functional imaging of the tumor microvasculature, of its development and organization, as well as of the effects of anti-angiogenic drugs.

Optical Cellular Micromotion: A New Paradigm to Measure Tumor Cells Invasion within Gels Mimicking the 3D Tumor Environments.

Measuring tumor cell invasiveness through 3D tissues, particularly at the single-cell level, can provide important mechanistic understanding and assist in identifying therapeutic targets of tumor invasion. However, current experimental approaches, including standard in vitro invasion assays, have limited physiological relevance and offer insufficient insight into the vast heterogeneity in tumor cell migration through tissues. To address these issues, here the concept of optical cellular micromotion is reported on, where digital holographic microscopy is used to map the optical nano- to submicrometer thickness fluctuations within single-cells. These fluctuations are driven by the dynamic movement of subcellular structures including the cytoskeleton and inherently associated with the biological processes involved in cell invasion within tissues. It is experimentally demonstrated that the optical cellular micromotion correlates with tumor cells motility and invasiveness both at the population and single-cell levels. In addition, the optical cellular micromotion significantly reduced upon treatment with migrastatic drugs that inhibit tumor cell invasion. These results demonstrate that micromotion measurements can rapidly and non-invasively determine the invasive behavior of single tumor cells within tissues, yielding a new and powerful tool to assess the efficacy of approaches targeting tumor cell invasiveness.

One-pot tuning of Au nucleation and growth: from nanoclusters to nanoparticles.

We describe a simple and effective method to obtain colloidal surface-functionalized Au nanoparticles. The method is primarily based on irradiation of a gold solution with high-flux X-rays from a synchrotron source in the presence of 11-mercaptoundecanoic acid (MUA). Extensive tests of the products demonstrated high colloidal density as well as excellent stability, shelf life, and biocompatibility. Specific tests with X-ray diffraction, UV-visible spectrometry, visible microscopy, Fourier transform infrared spectroscopy, dark-field visible-light scattering microscopy, and transmission electron microscopy demonstrated that MUA, being an effective surfactant, not only allows tunable size control of the nanoparticles, but also facilitates functionalization. The nanoparticle sizes were 6.45 ± 1.58, 1.83 ± 1.21, 1.52 ± 0.37 and 1.18 ± 0.26 nm with no MUA and with MUA-to-Au ratios of 1:2, 1:1, and 3:1. The MUA additionally enabled functionalization with l-glycine. We thus demonstrated flexibility in controlling the nanoparticle size over a large range with narrow size distribution.

One-pot synthesis of AuPt alloyed nanoparticles by intense x-ray irradiation.

We synthesized AuPt alloyed nanoparticles in colloidal solution by a one-pot procedure based on synchrotron x-ray irradiation in the presence of PEG (polyethylene glycol). The exclusive presence of alloyed nanoparticles with fcc structure was confirmed by several different experiments including UV-vis spectroscopy, x-ray diffraction (XRD) and transmission electron microscopy (TEM). The composition of the AuPt alloyed nanoparticles can be varied in a continuous fashion by simply varying the feed ratios of Au and Pt precursors. The nanoparticles exhibited colloidal stability and biocompatibility, important for potential applications.

Functional histology of glioma vasculature by FTIR imaging.

Fourier-transform infrared (FTIR) imaging has been used to investigate brain tumor angiogenesis using a mice solid tumor model and bare-gold (∅ 25 nm) or BaSO(4) (∅ 500 nm) nanoparticles (NP) injected into blood vasculature. FTIR images of 20-µm-thick tissue sections were used for chemical histology of healthy and tumor areas. Distribution of BaSO(4)-NP (using the 1,218-1,159 cm(-1) spectral interval) revealed clearly all details of blood vasculature with morphological abnormalities of tumor capillaries, while Au-NP (using the 1,046-1,002 cm(-1) spectral interval) revealed also diffusion properties of leaky blood vessels. Diffusion of Au-NP out of vascular space reached 64 ± 29 µm, showing the fenestration of "leaky" tumor blood vessels, which should allow small NP (<100 nm, as for Au-NP) to diffuse almost freely, while large NP should not (as for BaSO(4)-NP in this study). Therefore, we propose to develop FTIR imaging as a convenient tool for functional molecular histology imaging of brain tumor vasculature, both for identifying blood capillaries and for determining the extravascular diffusion space offered by vessel fenestration.

Detection of collagens in brain tumors based on FTIR imaging and chemometrics.

Fourier transform infrared (FTIR) imaging has been used as a molecular histopathology tool on brain tissue sections after intracranial implantation and development of glioma tumors. Healthy brain tissue (contralateral lobe) as well as solid and diffuse tumor tissues were compared for their collagen contents. IR spectra were extracted from IR images for determining the secondary structure of protein contents and compared to pure product spectra of collagens (types I, III, IV, V, and VI). Multivariate statistical analyses of variance and correspondence factorial analysis were performed to differentiate healthy and tumor brain tissues as well as their classification according to their secondary structure profiles. Secondary structure profiles revealed that no collagen was present in healthy tissues; they are also significantly different from solid and diffuse tumors (p < 0.05). Solid and diffuse tumors could be discriminated with respect to the secondary structure profile of fibrillar and non-fibrillar collagens, respectively. We can thus propose to develop FTIR imaging for histopathology examination of tumors on the basis of collagen contents.

Imaging the cellular uptake of tiopronin-modified gold nanoparticles.

Well-dispersed gold nanoparticles (NP) coated with tiopronin were synthesized by X-ray irradiation without reducing agents. High-resolution transmission electron microscopy shows that the average core diameters of the NPs can be systematically controlled by adjusting the tiopronin to Au mole ratio in the reaction. Three methods were used to study the NP uptake by cells: quantitative measurements by inductively coupled plasma mass spectrometry, direct imaging with high lateral resolution transmission electron microscopy and transmission X-ray microscopy. The results confirmed that the NP internalization mostly occurred via endocytosis and concerned the cytoplasm. The particles, in spite of their small sizes, were not found to arrive inside the cell nuclei. The synthesis without reducing agents and solvents increased the biocompatibility as required for potential applications in analysis and biomedicine in general.

Detecting small lung tumors in mouse models by refractive-index microradiology.

Refractive-index (phase-contrast) radiology was able to detect lung tumors less than 1 mm in live mice. Significant micromorphology differences were observed in the microradiographs between normal, inflamed, and lung cancer tissues. This was made possible by the high phase contrast and by the fast image taking that reduces the motion blur. The detection of cancer and inflammation areas by phase contrast microradiology and microtomography was validated by bioluminescence and histopathological analysis. The smallest tumor detected is less than 1 mm(3) with accuracy better than 1 × 10(-3) mm(3). This level of performance is currently suitable for animal studies, while further developments are required for clinical application.

Quantitative analysis of nanoparticle internalization in mammalian cells by high resolution X-ray microscopy.

BACKGROUND: Quantitative analysis of nanoparticle uptake at the cellular level is critical to nanomedicine procedures. In particular, it is required for a realistic evaluation of their effects. Unfortunately, quantitative measurements of nanoparticle uptake still pose a formidable technical challenge. We present here a method to tackle this problem and analyze the number of metal nanoparticles present in different types of cells. The method relies on high-lateral-resolution (better than 30 nm) transmission x-ray microimages with both absorption contrast and phase contrast -- including two-dimensional (2D) projection images and three-dimensional (3D) tomographic reconstructions that directly show the nanoparticles. RESULTS: Practical tests were successfully conducted on bare and polyethylene glycol (PEG) coated gold nanoparticles obtained by x-ray irradiation. Using two different cell lines, EMT and HeLa, we obtained the number of nanoparticle clusters uptaken by each cell and the cluster size. Furthermore, the analysis revealed interesting differences between 2D and 3D cultured cells as well as between 2D and 3D data for the same 3D specimen. CONCLUSIONS: We demonstrated the feasibility and effectiveness of our method, proving that it is accurate enough to measure the nanoparticle uptake differences between cells as well as the sizes of the formed nanoparticle clusters. The differences between 2D and 3D cultures and 2D and 3D images stress the importance of the 3D analysis which is made possible by our approach.

Tailored Au nanorods: optimizing functionality, controlling the aspect ratio and increasing biocompatibility.

Monodisperse gold nanorods with high aspect ratio were synthesized by x-ray irradiation. Irradiation was first used to stimulate the creation of seeds. Afterward, nanorod growth was stimulated either by chemical reduction or again by x-ray irradiation. In the last case, the entire process took place without reducing agents. The shape of the final products could be controlled by modulating the intensity of the x-ray irradiation during the seed synthesis. In turn, the nanorod aspect ratio determines the absorption wavelength of the nanorods that can thus be optimized for different applications. Likewise, the aspect ratio influences the uptake of the nanorods by HeLa cells.

Synchrotron microangiography studies of angiogenesis in mice with microemulsions and gold nanoparticles.

We present an effective solution for the problem of contrast enhancement in phase-contrast microangiography, with the specific objective of visualising small (<8 microm) vessels in tumor-related microangiogenesis. Different hydrophilic and hydrophobic contrast agents were explored in this context. We found that an emulsified version of the hydrophobic contrast agents Lipiodol provides the best contrast and minimal distortion of the circulation and vessel structure. Such emulsions are reasonably biocompatible and, with sizes of 0 +/- 0.8 microm, sufficient to diffuse to the smallest vessel and still provide reasonable contrast. We also explored the use of Au nanoparticle colloids that could be used not only to enhance contrast but also for interesting applications in nanomedicine. Both the Lipiodol microemulsions and Au nanoparticle colloids can be conjugated with medicines or cell specific labeling agents and their small size can allow the study of the diffusion of contrast agents through the vessel leakage. This enables direct imaging of drug delivery which is important for cancer treatment.

A systematic investigation of the effect of the fluid shear stress on Caco-2 cells towards the optimization of epithelial organ-on-chip models.

Epithelial cells experience constant mechanical forces, including fluid shear stress (FSS) on their apical surface. These forces alter both structure and function. While precise recapitulation of the complex mechanobiology of organs remains challenging, better understanding of the effect of mechanical stimuli is necessary towards the development of biorelevant in vitro models. This is especially relevant to organs-on-chip models which allow for fine control of the culture environment. In this study, the effects of the FSS on Caco-2 cell monolayers were systematically determined using a microfluidic device based on Hele-Shaw geometry. This approach allowed for a physiologically relevant range of FSS (from ∼0 to 0.03 dyn/cm2) to be applied to the cells within a single device. Exposure to microfluidic FSS induced significant phenotypical and functional changes in Caco-2 cell monolayers as compared to cells grown in static conditions. The application of FSS significantly altered the production of mucus, expression of tight junctions, vacuolization, organization of cytoskeleton, formation of microvilli, mitochondrial activity and expression of cytochrome P450. In the context of the intestinal epithelium, this detailed understanding of the effects of the FSS will enable the realization of in vitro organs-on-chip models with well-defined and tailored characteristics to a specific purpose, including for drug and nanoparticle absorption studies. The Hele-Shaw approach used in this study could be readily applied to other cell types and adapted for a wide range of physiologically relevant FSS.

Effect of nitride film coatings on cell compatibility.

OBJECTIVE: To evaluate the cytotoxicity of nickel-based alloy surfaces after nitride film coatings. METHODS: A total of 120 disc-shaped specimens (1.5 x 12.0mm) were prepared from nickel (Ni) alloy ingots and metallurgically ground with silicon carbide (SiC) sandpaper to 1200 grit and used as the ground group. Ninety specimens from the ground group were selected and further polished with 1.0 microm aluminum powder slurry and assigned as the polished group. Titanium nitride (TiN) and titanium-aluminum nitride (TiAlN) film coatings were deposited onto 30 polished specimens each by a reactive radio frequency magnetron sputter deposition system and used as coated groups, respectively. The morphological changes and cytoskeleton of tested human gingival fibroblasts were observed using fluorescence microscopy at 3h and 24h time periods, respectively. An MTT assay was used to assess cell viability at 24h. The results were statistically analyzed (n=5, ANOVA, Scheffe', p<0.05). RESULTS: After 3h of incubation, cells began to spread on the test surfaces. Spindle-shaped fibroblasts with well-developed cytoskeleton and distinct actin fibers were observed at the 24h incubation point on the polished and coated specimens. Results of the MTT assay revealed that the TiN and TiAlN film coated groups were significantly higher in cell proliferation and viability than the polished and control groups (p<0.05). SIGNIFICANCE: The biocompatibility of Ni-based alloy was increased significantly after nitride film coating.

Reconfigurable liquid-core/liquid-cladding optical waveguides with dielectrophoresis-driven virtual microchannels on an electromicrofluidic platform.

An electrically reconfigurable liquid-core/liquid-cladding (L(2)) optical waveguide with core liquid γ-butyrolactone (GBL, ncore = 1.4341, εcore = 39) and silicone oil (ncladding = 1.401, εcladding = 2.5) as cladding liquid is accomplished using dielectrophoresis (DEP) that attracts and deforms the core liquid with the greater permittivity to occupy the region of strong electric field provided by Teflon-coated ITO electrodes between parallel glass plates. Instead of continuously flowing core and cladding liquids along a physical microchannel, the DEP-formed L(2) optical waveguide guides light in a stationary virtual microchannel that requires liquids of limited volume without constant supply and creates stable liquid/liquid interfaces for efficient light guidance in a simply fabricated microfluidic device. We designed and examined (1) stationary and (2) moving L(2) optical waveguides on the parallel-plate electromicrofluidic platform. In the stationary L-shaped waveguide, light was guided in a GBL virtual microchannel core for a total of 27.85 mm via a 90° bend (radius 5 mm) before exiting from the light outlet of cross-sectional area 100 µm × 100 µm. For the stationary spiral waveguide, light was guided in a GBL core containing Rhodamine 6G (R6G, 1 mM) and through a series of 90° bends with decreasing radii from 5 mm to 2.5 mm. With the stationary straight waveguide, the propagation loss was measured to be 2.09 dB cm(-1) in GBL with R6G (0.01 mM). The moving L-shaped waveguide was implemented on a versatile electromicrofluidic platform on which electrowetting and DEP were employed to generate a precise GBL droplet and form a waveguide core. On sequentially applying appropriate voltage to one of three parallel L-shaped driving electrodes, the GBL waveguide core was shifted; the guided light was switched at a speed of up to 0.929 mm s(-1) (switching period 70 ms, switching rate 14.3 Hz) when an adequate electric signal (173.1 VRMS, 100 kHz) was applied.

Advanced micromachining of concave microwells for long term on-chip culture of multicellular tumor spheroids.

A novel approach based on advanced micromachining is demonstrated to fabricate concave microwell arrays for the formation of high quality multicellular tumor spheroids. Microfabricated molds were prepared using a state-of-the-art CNC machining center, containing arrays of 3D convex micropillars with size ranging from 150 µm to 600 µm. Microscopic imaging of the micropillars machined on the mold showed smooth, curved microfeatures of a dramatic 3D shape. Agarose microwells could be easily replicated from the metallic molds. EMT-6 tumor cells seeded in the primary macrowell sedimented efficiently to the bottom of the concave microwells and formed multicellular spheroids within 48 h. Dense and homogeneous multicellular spheroids were obtained after 10 days of culture, confirming the suitability of the proposed approach. To facilitate long term spheroid culture and reliable on-chip drug assay, polydimethylsiloxane microwells were also replicated from the metallic molds. A solvent swelling method was adapted and optimized to Pluronic F127 towards physically entrapping the block copolymer molecules within the polydimethylsiloxane network and in turn to improve long term cell-binding resistance. Homogeneous multicellular spheroids were efficiently formed in the concave microwells and on-chip drug assays could be reliably carried out using curcumin as a model anti-cancer drug. Advanced micromachining provides an excellent technological solution to the fabrication of high quality concave microwells.

Image alignment for tomography reconstruction from synchrotron X-ray microscopic images.

A synchrotron X-ray microscope is a powerful imaging apparatus for taking high-resolution and high-contrast X-ray images of nanoscale objects. A sufficient number of X-ray projection images from different angles is required for constructing 3D volume images of an object. Because a synchrotron light source is immobile, a rotational object holder is required for tomography. At a resolution of 10 nm per pixel, the vibration of the holder caused by rotating the object cannot be disregarded if tomographic images are to be reconstructed accurately. This paper presents a computer method to compensate for the vibration of the rotational holder by aligning neighboring X-ray images. This alignment process involves two steps. The first step is to match the "projected feature points" in the sequence of images. The matched projected feature points in the x-θ plane should form a set of sine-shaped loci. The second step is to fit the loci to a set of sine waves to compute the parameters required for alignment. The experimental results show that the proposed method outperforms two previously proposed methods, Xradia and SPIDER. The developed software system can be downloaded from the URL, http://www.cs.nctu.edu.tw/~chengchc/SCTA or http://goo.gl/s4AMx.

Immunospecific targeting of CD45 expressing lymphoid cells: towards improved detection agents of the sentinel lymph node.

This study was designed to demonstrate the potential of small nanoparticulate lymphotropic contrast agents designed to bind with high affinity to lymphoid cells overexpressing the CD45 antigen. To this end, small gold nanoparticles used as model were conjugated to anti-CD45 antibodies and injected in mice in the dorsal toe of the fore/hind paw. Chemical analysis demonstrated rapid uptake and transport of the nanoparticles in the lymphatic as well as significant retention of the nanoparticles with high binding affinity to lymphoid cells in the popliteal and axillary lymph nodes in comparison to non-targeted nanoparticles.

Very small photoluminescent gold nanoparticles for multimodality biomedical imaging.

An original synthesis method based on X-ray irradiation produced gold nanoparticles (AuNPs) with two important properties for biomedical research: intense visible photoluminescence and very high accumulation in cancer cells. The nanoparticles, coated with MUA (11-mercaptoundecanoid acid), are very small (1.4 nm diameter); the above two properties are not present for even slightly larger sizes. The small MUA-AuNPs are non-cytotoxic (except for very high concentrations) and do not interfere with cancer cell proliferation. Multimodality imaging using visible light fluorescence and X-ray microscopy is demonstrated by tracing the nanoparticle-loaded tumor cells.