RESUMEN
ConspectusThirty years ago, George A. Olah proposed the concept of the methanol economy, where methanol replaces fossil fuels as a means of energy storage, ground transportation fuel, and raw material for the manufacture of other carbon-based products. Over the years, with rising global warming concerns, the concept has evolved. A special interest is devoted to the development of catalytic processes that allow the transformation of carbon dioxide, via methanol, into CO2 neutral liquid hydrocarbons. These products could replace the oil-based fuels currently used by combustion engines. The rapid depletion of such fuels would avoid a considerable amount of CO2 emissions during the current energy transition.Over the past decade, we have focused on different key processes that should allow for maximal atom efficiency and, therefore, minimal energy consumption in a field, CO2 valorization, that can easily become a zero-sum game. In this Account, we highlight the importance of catalyst design to overcome the process challenges in the production of liquid fuels from methanol. Additionally, progress in multifunctional catalysts able to directly convert, in one single reactor, CO2 to liquid fuels is also discussed in detail. This integrated option is of particular interest since it allows an important decrease in operational units while increasing throughput by converting, in situ, a thermodynamically limited intermediate.
RESUMEN
A methanol-based economy offers an efficient solution to current energy transition challenges, where the zeolite-catalyzed methanol-to-hydrocarbons (MTH) process would be a key enabler in yielding synthetic fuels/chemicals from renewable sources. Despite its original discovery over half a century ago over the zeolite ZSM-5, the practical application of this process in a CO2 -neutral scenario has faced several obstacles. One prominent challenge has been the intricate mechanistic complexities inherent in the MTH process over the zeolite ZSM-5, impeding its widespread adoption. This work takes a significant step forward by providing critical insights that bridge the gap in our understanding of the MTH process. It accomplishes this by connecting the (Koch-carbonylation-led) direct and dual cycle mechanisms, which operate during the early and steady-state phases of MTH catalysis, respectively. To unravel these mechanistic intricacies, we have performed catalytic and operando (i.e., UV/Vis coupled with an online mass spectrometer) and solid-state NMR spectroscopic-based investigations on the MTH process, involving co-feeding methanol and acetone (cf. a key Koch-carbonylated species), including selective isotope-labeling studies. Our iterative research approach revealed that (Koch-)carbonyl group selectively promotes the side-chain mechanism within the arene cycle of the dual cycle mechanism, impacting the preferential formation of BTX fraction (i.e., benzene-toluene-xylene) primarily.
RESUMEN
Decarbonizing the transportation sector is among the biggest challenges in the fight against climate change. CO2 -neutral fuels, such as those obtained from renewable methanol, have the potential to account for a large share of the solution, since these could be directly compatible with existing power trains. Although discovered in 1977, the zeolite-catalyzed methanol-to-gasoline (MTG) process has hardly reached industrial maturity, among other reasons, because maximizing the production of gasoline range hydrocarbons from methanol has proved complicated. In this work, we apply multimodal operando UV/Vis diffuse reflectance spectroscopy coupled with an online mass spectrometer and "mobility-dependent" solid-state NMR spectroscopy to better understand the reaction mechanism over zeolites H-Beta and Zn-Beta. Significantly, the influential co-catalytic role of oxymethylene species is linked to gasoline formation, which impacts the MTG process more than carbonylated species.
RESUMEN
A highly selective, environmentally friendly, and scalable electrochemical protocol for the construction of α-acyloxy sulfides, through the synergistic effect of self-assembly-induced C(sp3)-H/O-H cross-coupling, is reported. It features exceptionally broad substrate scope, high regioselectivity, gram-scale synthesis, construction of complex molecules, and applicability to a variety of nucleophiles. Moreover, the soft X-ray absorption technique and a series of control experiments have been utilized to demonstrate the pivotal role of the self-assembly of the substrates, which indeed is responsible for the excellent compatibility and precise control of high regioselectivity in our electrochemical protocol.
RESUMEN
The synthesis and characterization of the isomeric ruthenium complexes with the general formula cis- and trans-[Ru(trpy)(qc)X]n+ (trpy is 2,2':6',2â³-terpyridine, qc is 8-quinolinecarboxylate, cis-1 and trans-1, X = Cl, n = 0; cis-2 and trans-2, X=OH2, n = 1) with respect to the relative disposition of the carboxylate and X ligands are reported. For comparison purposes, another set of ruthenium complexes with general formula cis- and trans-[Ru(trpy)(pic)(OH2)]+ (pic is 2-picolinate (cis-3, trans-3)) have been prepared. The complexes with a qc ligand show a more distorted geometry compared to the complexes with a pic ligand. In all of the cases, the trans isomers show lower potential values for all of the redox couples relative to the cis isomers. Complexes cis-2 and trans-2 with six-member chelate rings show higher catalytic activity than cis-3 and trans-3. Overall, it was shown that the electronic perturbation to the metal center exerted by different orientation and geometry of the ligands significantly influences both redox properties and catalytic performance.
RESUMEN
The selective installation of azide groups into C(sp3)-H bonds is a priority research topic in organic synthesis, particularly in pharmaceutical discovery and late-stage diversification. Herein, we demonstrate a generalized manganese-catalyzed oxidative azidation methodology of C(sp3)-H bonds using nucleophilic NaN3 as an azide source under electrophotocatalytic conditions. This approach allows us to perform the reaction without the necessity of adding an excess of the substrate and successfully avoiding the use of stoichiometric chemical oxidants such as iodine(III) reagent or NFSI. A series of tertiary and secondary benzylic C(sp3)-H, aliphatic C(sp3)-H, and drug-molecule-based C(sp3)-H bonds in substrates are well tolerated under our protocol. The simultaneous gram-scale synthesis and the ease of transformation of azide to amine collectively advocate for the potential application in the preparative synthesis. Good reactivity of the tertiary benzylic C(sp3)-H bond and selectivity of the tertiary aliphatic C(sp3)-H bond in substrates to incorporate nitrogen-based functionality at the tertiary alkyl group also provide opportunities to manipulate numerous potential medicinal candidates. We anticipate our synthetic protocol, consisting of metal catalysis, electrochemistry, and photochemistry, would provide a new sustainable option to execute challenging organic synthetic transformations.
RESUMEN
Methane dehydroaromatization (MDA) is among the most challenging processes in catalysis science owing to the inherent harsh reaction conditions and fast catalyst deactivation. To improve this process, understanding the mechanism of the initial C-C bond formation is essential. However, consensus about the actual reaction mechanism is still to be achieved. In this work, using advanced magic-angle spinning (MAS) solid-state NMR spectroscopy, we study in detail the early stages of the reaction over a well-dispersed Mo/H-ZSM-5 catalyst. Simultaneous detection of acetylene (i.e., presumably the direct C-C bond-forming product from methane), methylidene, allenes, acetal, and surface-formate species, along with the typical olefinic/aromatic species, allow us to conclude the existence of at least two independent C-H activation pathways. Moreover, this study emphasizes the significance of mobility-dependent host-guest chemistry between an inorganic zeolite and its trapped organic species during heterogeneous catalysis.
RESUMEN
A systematic molecular level and spectroscopic investigation is presented to show the cooperative role of Brønsted acid and Lewis acid sites in zeolites for the conversion of methanol. Extra-framework alkaline-earth metal containing species and aluminum species decrease the number of Brønsted acid sites, as protonated metal clusters are formed. A combined experimental and theoretical effort shows that postsynthetically modified ZSM-5 zeolites, by incorporation of extra-framework alkaline-earth metals or by demetalation with dealuminating agents, contain both mononuclear [MOH]+ and double protonated binuclear metal clusters [M(µ-OH)2M]2+ (M = Mg, Ca, Sr, Ba, and HOAl). The metal in the extra-framework clusters has a Lewis acid character, which is confirmed experimentally and theoretically by IR spectra of adsorbed pyridine. The strength of the Lewis acid sites (Mg > Ca > Sr > Ba) was characterized by a blue shift of characteristic IR peaks, thus offering a tool to sample Lewis acidity experimentally. The incorporation of extra-framework Lewis acid sites has a substantial influence on the reactivity of propene and benzene methylations. Alkaline-earth Lewis acid sites yield increased benzene methylation barriers and destabilization of typical aromatic intermediates, whereas propene methylation routes are less affected. The effect on the catalytic function is especially induced by the double protonated binuclear species. Overall, the extra-framework metal clusters have a dual effect on the catalytic function. By reducing the number of Brønsted acid sites and suppressing typical catalytic reactions in which aromatics are involved, an optimal propene selectivity and increased lifetime for methanol conversion over zeolites is obtained. The combined experimental and theoretical approach gives a unique insight into the nature of the supramolecular zeolite catalyst for methanol conversion which can be meticulously tuned by subtle interplay of Brønsted and Lewis acid sites.
RESUMEN
Although industrialized, the mechanism for catalytic upgrading of bioethanol over solid-acid catalysts (that is, the ethanol-to-hydrocarbons (ETH) reaction) has not yet been fully resolved. Moreover, mechanistic understanding of the ETH reaction relies heavily on its well-known "sister-reaction" the methanol-to-hydrocarbons (MTH) process. However, the MTH process possesses a C1 -entity reactant and cannot, therefore, shed any light on the homologation reaction sequence. The reaction and deactivation mechanism of the zeolite H-ZSM-5-catalyzed ETH process was elucidated using a combination of complementary solid-state NMR and operando UV/Vis diffuse reflectance spectroscopy, coupled with on-line mass spectrometry. This approach establishes the existence of a homologation reaction sequence through analysis of the pattern of the identified reactive and deactivated species. Furthermore, and in contrast to the MTH process, the deficiency of any olefinic-hydrocarbon pool species (that is, the olefin cycle) during the ETH process is also noted.
RESUMEN
Zeolite activity and selectivity is often determined by the underlying proton and hydrogen-transfer reaction pathways. For the first time, we use single-molecule fluorescence microscopy to directly follow the real-time behavior of individual styrene-derived carbocationic species formed within zeolite ZSM-5. We find that intermittent fluorescence and remarkable photostability of carbocationic intermediates strongly depend on the local chemical environment imposed by zeolite framework and guest solvent molecules. The carbocationic stability can be additionally altered by changing para-substituent on the styrene moiety, as suggested by DFT calculations. Thermodynamically unstable carbocations are more likely to switch between fluorescent (carbocationic) and dark (neutral) states. However, the rate constants of this reversible change can significantly differ among individual carbocations, depending on their exact location in the zeolite framework. The lifetimes of fluorescent states and reversibility of the process can be additionally altered by changing the interaction between dimeric carbocations and solvated Brønsted acid sites in the MFI framework. Advanced multidimensional magic angle spinning solid-state NMR spectroscopy has been employed for the accurate structural elucidation of the reaction products during the zeolite-catalyzed dimerization of styrene in order to corroborate the single-molecule fluorescence microscopy data. This complementary approach of single-molecule fluorescence microscopy, NMR, and DFT collectively indicates that the relative stability of the carbocationic and the neutral states largely depends on the substituent and the local position of the Brønsted acid site within the zeolite framework. As a consequence, new insights into the host-guest chemistry between the zeolite and aromatics, in terms of their surface mobility and reactivity, have been obtained.
RESUMEN
Understanding the 3-D distribution and nature of active sites in heterogeneous catalysts is critical to developing structure-function relationships. However, this is difficult to achieve in microporous materials as there is little relative z-contrast between active and inactive framework elements (e.g., Al, O, P, and Si), making them difficult to differentiate with electron microscopies. We have applied atom probe tomography (APT), currently the only nanometer-scale 3-D microscopy to offer routine light element contrast, to the methanol-to-hydrocarbons (MTH) catalyst SAPO-34, with Si as the active site, which may be present in the framework as either isolated Si species or clusters (islands) of Si atoms. 29Si solid-state NMR data on isotopically enriched and natural abundance materials are consistent with the presence of Si islands, and the APT results have been complemented with simulations to show the smallest detectable cluster size as a function of instrument spatial resolution and detector efficiency. We have identified significant Si-Si affinity in the materials, as well as clustering of coke deposited by the MTH reaction (13CH3OH used) and an affinity between Brønsted acid sites and coke. A comparison with simulations shows that the ultimate spatial resolution that can be attained by APT applied to molecular sieves is 0.5-1 nm. Finally, the observed 13C clusters are consistent with hydrocarbon pool mechanism intermediates that are preferentially located in regions of increased Brønsted acidity.
RESUMEN
Ketenes in the limelight: The influential role of ketenes has never been adequately acknowledged in zeolite chemistry and catalysis; unlike other first generation highly reactive intermediates, such as carbocations, carbanions, radicals, and carbenes. In fact, the role that ketenes play during catalysis-whether beneficial or detrimental-is a contentious subject that requires further consideration.
RESUMEN
After a prolonged effort over many years, the route for the formation of a direct carbon-carbon (C-C) bond during the methanol-to-hydrocarbon (MTH) process has very recently been unveiled. However, the relevance of the "direct mechanism"-derived molecules (that is, methyl acetate) during MTH, and subsequent transformation routes to the conventional hydrocarbon pool (HCP) species, are yet to be established. This important piece of the MTH chemistry puzzle is not only essential from a fundamental perspective, but is also important to maximize catalytic performance. The MTH process was probed over a commercially relevant H-SAPO-34 catalyst, using a combination of advanced solid-state NMR spectroscopy and operando UV/Vis diffuse reflectance spectroscopy coupled to an on-line mass spectrometer. Spectroscopic evidence is provided for the formation of (olefinic and aromatic) HCP species, which are indeed derived exclusively from the direct C-C bond-containing acetyl group of methyl acetate. New mechanistic insights have been obtained from the MTH process, including the identification of hydrocarbon-based co-catalytic organic reaction centers.
RESUMEN
Highly b-oriented zeolite ZSM-5 films are critical for applications in catalysis and separations and may serve as models to study diffusion and catalytic properties in single zeolite channels. However, the introduction of catalytically active Al3+ usually disrupts the orientation of zeolite films. Herein, using structure-directing agents with hydroxy groups, we demonstrate a new method to prepare highly b-oriented zeolite ZSM-5 films with a broad range of Si/Al ratios (Si/Al=45 to ∞). Fluorescence micro-(spectro)scopy was used to monitor misoriented microstructures, which are invisible to X-ray diffraction, and show Al3+ framework incorporation and illustrate the differences between misoriented and b-oriented films. The methanol-to-hydrocarbons process was studied by operando UV/Vis diffuse reflectance micro-spectroscopy with on-line mass spectrometry, showing that the b-oriented zeolite ZSM-5 films are active and stable under realistic process conditions.
RESUMEN
Zeolite-based catalyst bodies are commonly employed in a range of important industrial processes. Depending on the binder and shaping method chosen, vast differences in the reactivity, selectivity and stability are obtained. Here, three highly complementary micro-spectroscopic techniques were employed to study zeolite ZSM-5-binder interactions in SiO2-, Al2O3-, SiO2 : Al2O3- (2 : 1 mix) and kaolinite-bound catalyst pellets. We establish how their preparation influences the zeolite-clay/binder interactions. Using thiophene as an acid-catalyzed staining reaction, light absorbing oligomers produced in each sample were followed. To our surprise, kaolinite decreased the overall reactivity of the sample due to the phase change of the binder, creating a hard impenetrable outer layer. Aluminum migration to the zeolite was observed when Al2O3 was selected as a binder, creating additional Brønsted acid sites, which favored the formation of ring-opened thiophene oligomers compared to the larger oligomer species produced when SiO2 was used as a binder. In the latter case, the interaction of the Si-OH groups in the binder with thiophene was revealed to have a large impact in creating such large oligomer species. Furthermore, the combination of a SiO2 : Al2O3 mix as a binder enhanced the reactivity, possibly due to the creation of additional Brønsted acid sites between the two binder components during pellet preparation. It is evident that, independent of the shaping method, the intimate contact between the zeolite and binder heavily impacts the reactivity and product selectivity, with the type of binder playing a vital role.
RESUMEN
Methanol-to-olefin (MTO) catalysis is a very active field of research because there is a wide variety of sometimes conflicting mechanistic proposals. An example is the ongoing discussion on the initial C-C bond formation from methanol during the induction period of the MTO process. By employing a combination of solid-state NMR spectroscopy with UV/Vis diffuse reflectance spectroscopy and mass spectrometry on an active H-SAPO-34 catalyst, we provide spectroscopic evidence for the formation of surface acetate and methyl acetate, as well as dimethoxymethane during the MTO process. As a consequence, new insights in the formation of the first C-C bond are provided, suggesting a direct mechanism may be operative, at least in the early stages of the MTO reaction.
RESUMEN
Photocatalysis allows innovations in organic synthesis. Among the various catalytic reactions, CH-functionalizations offer valuable possibilities for the refinement of easily available building blocks. In this respect, catalytic borylation is of interest, too. So far, most of the catalytic borylation reactions are performed under thermal conditions at comparably high temperatures. Here, we describe a new synthetic route for efficient borylation reactions of arenes using a photocatalytic pathway. This novel approach allows the synthesis of a broad variety of borylated arenes and heteroarenes under mild conditions. Applying trans-[Rh(PMe3)2(CO)Cl] as an active photocatalyst and HBPin as an boron source, we achieved high TON. A catalytic cycle that relies on a Rh(I)-Rh(III) interconversion is proposed.
RESUMEN
The efficient catalytic dehydrogenation of alkanes to olefins is one of the most investigated reactions in organic synthesis. In the coming years, an increased supply of shorter-chain alkanes from natural and shale gas will offer new opportunities for inexpensive carbon feedstock through such dehydrogenation processes. Existing methods for alkane dehydrogenation using heterogeneous catalysts require harsh reaction conditions and have a lack of selectivity, whereas homogeneous catalysis methods result in significant waste generation. A strong need exists for atom-efficient alkane dehydrogenations on a useful scale. Herein, we have developed improved acceptorless catalytic systems under optimal light transmittance conditions using trans-[Rh(PMe3)2(CO)Cl] as the catalyst with different additives. Unprecedented catalyst turnover numbers are obtained for the dehydrogenation of cyclic and linear (from C4) alkanes and liquid organic hydrogen carriers. These reactions proceed with unique conversion, thereby providing a basis for practical alkane dehydrogenations.
RESUMEN
The complex series [Ru(pap)(Q)2](n) ([1](n)-[4](n); n = +2, +1, 0, -1, -2) contains four redox non-innocent entities: one ruthenium ion, 2-phenylazopyridine (pap), and two o-iminoquinone moieties, Q = 3,5-di-tert-butyl-N-aryl-1,2-benzoquinonemonoimine (aryl = C6H5 (1(+)); m-(Cl)2C6H3 (2(+)); m-(OCH3)2C6H3 (3(+)); m-(tBu)2C6H3 (4(+))). A crystal structure determination of the representative compound, [1]ClO4, established the crystallization of the ctt-isomeric form, that is, cis and trans with respect to the mutual orientations of O and N donors of two Q ligands, and the coordinating azo N atom trans to the O donor of Q. The sensitive C-O (average: 1.299(3)â Å), C-N (average: 1.346(4)â Å) and intra-ring C-C (meta; average: 1.373(4)â Å) bond lengths of the coordinated iminoquinone moieties in corroboration with the N-N length (1.292(3)â Å) of pap in 1(+) establish [Ru(III)(pap(0))(Q(·-))2 ](+) as the most appropriate electronic structural form. The coupling of three spins from one low-spin ruthenium(III) (t2g(5)) and two Q(·-) radicals in 1(+)-4(+) gives a ground state with one unpaired electron on Q(·-), as evident from g = 1.995 radical-type EPR signals for 1(+)-4(+). Accordingly, the DFT-calculated Mulliken spin densities of 1(+) (1.152 for two Q, Ru: -0.179, pap: 0.031) confirm Q-based spin. Complex ions 1(+)-4(+) exhibit two near-IR absorption bands at about λ = 2000 and 920â nm in addition to intense multiple transitions covering the visible to UV regions; compounds [1]ClO4-[4]ClO4 undergo one oxidation and three separate reduction processes within ±2.0â V versus SCE. The crystal structure of the neutral (one-electron reduced) state (2) was determined to show metal-based reduction and an EPR signal at g = 1.996. The electronic transitions of the complexes 1(n)-4(n) (n = +2, +1, 0, -1, -2) in the UV, visible, and NIR regions, as determined by using spectroelectrochemistry, have been analyzed by TD-DFT calculations and reveal significant low-energy absorbance (λmax >1000â nm) for cations, anions, and neutral forms. The experimental studies in combination with DFT calculations suggest the dominant valence configurations of 1(n)-4(n) in the accessible redox states to be [Ru(III)(pap(0))(Q(·-))(Q(0))](2+) (1(2+)-4(2+))â[Ru(III)(pap(0))(Q(·-))2](+) (1(+)-4(+))â[Ru(II)(pap(0))(Q(·-))2] (1-4)â[Ru(II)(pap(·-))(Q(·-))2](-) (1(-)-4(-))â[Ru(III)(pap(·-))(Q(2-))2](2-) (1(2-)-4(2-)).