Surgical vs nonsurgical treatments in patients with anterior open-bite have similar effects in occlusal function: A 2-year follow-up study.

INTRODUCTION: This study aimed to investigate changes in bite force (BF) and occlusal contact area after anterior open-bite (AOB) treatment and compare the changes in surgical vs nonsurgical treatment. METHODS: This retrospective study included patients with AOB compared with normal occlusion. AOB was corrected by either intrusion of the maxillary molars (intrusion group, n = 19) or orthognathic surgery (surgery group, n = 37). The control group (n = 35) had a normal overbite relationship. Records of lateral cephalograms, BF, and occlusal contact area taken before (T0), immediately after (T1), and 2 years after (T2) orthodontic treatment were compared within and among the 3 groups. RESULTS: The open-bite group, including intrusion and surgery groups, had a lower BF and less occlusal contact area than the control group at T0 and T1 (P <0.001). However, there were no significant differences among the 3 groups at T2 (P >0.05). The intrusion and surgery groups showed no significant differences throughout the observation period extending from T0 to T2 (P >0.05). Although BF and occlusal contact area decreased at T1 compared with T0, they increased during retention and showed higher values at T2 than at T0. CONCLUSIONS: Treatment of AOB improved BF and occlusal contact area 2 years posttreatment. Orthognathic surgery and molar intrusion using orthodontic miniscrews can improve occlusal function similarly. Orthodontists can select either method depending on malocclusion severity and patient demand.

Treatment outcome comparison of Invisalign vs fixed appliance treatment in first premolar extraction patients.

INTRODUCTION: In this study, we compared the dentitional changes after Invisalign and conventional orthodontic treatment with 4 first premolar extractions. METHODS: This retrospective study included 57 patients whose orthodontic treatment involved the extraction of 4 first premolars because of bialveolar protrusion. A total of 27 patients were treated with Invisalign (mean age, 25.5 ± 5.2 years) and 30 patients with the fixed appliance (mean age, 24.4 ± 5.8 years). The angular and linear changes of the maxillary and mandibular central incisors, second premolars, first molars, and second molars were measured from the recordings on the basis of the lateral cephalograms taken before and after treatment. The angular changes of the canines and second premolars were measured using panoramic radiographs. RESULTS: The overbite and interincisal angle increased significantly in the Invisalign group compared with in the conventional fixed appliance group (P <0.05). The maxillary central incisors showed increased lingual tipping in the Invisalign group (P <0.05), whereas there was no statistically significant difference in the angular change of the mandibular incisors between groups (P >0.05). The maxillary first and second molars showed mesial tipping in the Invisalign group (P <0.05). The maxillary second premolars, first and second molars, and the mandibular second molars showed mesial movement in the Invisalign group (P <0.05). CONCLUSIONS: The Invisalign group showed more statistically significant lingual tipping of the maxillary central incisors, distal tipping of the maxillary canines, and mesial tipping of the maxillary first and second molars after maximum retraction of the anterior teeth compared with the fixed appliance group.

Factors influencing the successful eruption of the maxillary third molar after extraction of the maxillary second molar.

INTRODUCTION: This study evaluated the occlusal status of the maxillary third molars that erupted spontaneously after extraction of the maxillary second molars and investigated the factors that influenced the occlusal status of the maxillary third molars. METHODS: We assessed 136 maxillary third molars in 87 patients. Alignment, marginal ridge discrepancy, occlusal contact, interproximal contact, and buccal overjet were used to score the occlusal status. Occlusal status was classified as good (G group), acceptable (A group), and poor (P group) for the maxillary third molar at its full eruption (T1). The Nolla's stage, long axis angle, the vertical and horizontal position of the maxillary third molar, and the maxillary tuberosity space were assessed at the time of maxillary second molar extraction (T0) and T1 to identify factors influencing the eruption of the maxillary third molar. RESULTS: G, A, and P groups comprised 47.8%, 17.6,% and 34.6% of the sample, respectively. Age was the lowest in the G group at both T0 and T1. The maxillary tuberosity space at T1 and the amount of the change of maxillary tuberosity space were the largest in the G group. There was a significant difference in the distribution of the Nolla's stage at T0. The proportions of the G group were 60.0% in stage 4, 46.8% in stages 5 and 6, 70.4% in stage 7, and 15.0% in stages 8-10. According to multiple logistic regression analysis, stages 8-10 for the maxillary third molar at T0 and the amount of the change of maxillary tuberosity were negatively associated with the G group. CONCLUSIONS: Good-to-acceptable occlusion was seen in 65.4% of the maxillary third molars after maxillary second molar extraction. Insufficient increase in the maxillary tuberosity space and Nolla stage 8 or higher at T0 negatively influenced the maxillary third molar eruption.

Differences in the 3-dimensional aging changes of the lips among female adults with skeletal Class I, II, and III malocclusion.

INTRODUCTION: The objective of this study was to evaluate and compare the 3-dimensional (3D) aging changes of the lips among adult skeletal Class I, II, and III malocclusion. METHODS: Female adult orthodontic patients aged 20-50 years with pretreatment cone-beam computed tomography scans were retrospectively classified according to age (20s [20-29 years], 30s [30-39 years], and 40s [40-49 years]) and then subclassified by malocclusion into skeletal Class I, II, and III relationship (9 groups; n = 30 per group). Positional differences in midsagittal and parasagittal soft-tissue landmarks and 3D morphologic aging changes of the lips were evaluated using cone-beam computed tomography scans. RESULTS: Labiale superius and cheilion for patients in their 40s indicated a significant downward and backward position compared with those in their 20s, regardless of skeletal classifications (P <0.05). Accordingly, the upper lip height decreased, and the mouth width increased significantly (P <0.05). For Class III malocclusion, the upper lip vermilion angle was greater for patients in their 40s than those in their 20s (P <0.05), whereas the lower lip vermilion angle was only lower for patients with Class II malocclusion (P <0.05). CONCLUSIONS: Middle-aged adult females (40-49 years) had a lower upper lip height and greater mouth width than those in their 20s, regardless of skeletal malocclusion. However, prominent morphologic aging changes of the lips were noted on the upper lip for skeletal Class III malocclusion and the lower lip for skeletal Class II malocclusion, implying that the underlying skeletal features (or malocclusion) may influence 3D aging changes of the lips.

Evaluation of the dimensional alternation of the alveolar bone in patients with a congenitally missing mandibular lateral incisor using cone-beam computed tomography.

INTRODUCTION: The alveolar bone is an essential consideration when planning treatment for patients with tooth agenesis. This study evaluated the changes in the alveolar bone and adjacent teeth in patients with a congenitally missing mandibular lateral incisor using cone-beam computed tomography. METHODS: Twenty-three nonorthodontically treated adults with a unilateral congenitally missing mandibular lateral incisor were the missing group (M group). The control group (C group) consisted of 23 nonorthodontically treated adults with normal occlusion and no missing teeth. First, the difference in the arch perimeter between the groups was compared at the cementoenamel junction (CEJ) level and the root apex (RA) level. Next, the root divergence of the anterior teeth in the M group was observed. Finally, the alveolar bone thickness ratio was compared between the M and C groups at different vertical levels. RESULTS: The arch perimeter was significantly decreased in the M group at the CEJ and RA levels (P <0.05). Root divergence was observed adjacent to the missing site (P <0.0001). There were a reduction in total and cancellous cortical alveolar bone thickness (ABT) ratios at the 3-, 6-, and 9-mm positions (P <0.05). The buccal cortical ABT ratios decreased at the 3-and 6-mm positions. The lingual ABT ratio increased at the 9-mm position (P <0.05). CONCLUSIONS: The congenitally missing mandibular lateral incisor caused a reduction in the arch perimeter in the CEJ area and the RA area. The root divergences were observed in the teeth adjacent to the missing areas. A significant decrease in the buccal cortical bone and cancellous bone was observed in the missing area.

The success and effectiveness of miniscrew-assisted rapid palatal expansion are age- and sex-dependent.

OBJECTIVES: This study aimed to assess the success rate and the amount of suture separation after the miniscrew-assisted rapid palatal expansion (MARPE) procedure in relation to the chronological age and sex of the patients. MATERIALS AND METHODS: The periapical radiographs of 215 subjects (95 male; 120 female; range, 6-60 years) who had undergone MARPE treatment were retrospectively analyzed. The success of suture separation was determined and, in suture-separated subjects, the amount of suture separation was evaluated by suture separation ratio calculated from the periapical radiograph obtained after active expansion. Association tests were performed using linear-by-linear association, the Jonckheere-Terpstra test, Fisher's exact test, and the Mann-Whitney U test, and linear regression models were also developed. RESULTS: The success rate of suture separation was 61.05% in male, 94.17% in female, and 79.53% in both sexes. There was a statistically significant association between older age and suture nonseparation in male (p < 0.001), but not in female (p = 0.221). In suture-separated subjects, there was a statistically significant trend toward a low amount of suture separation with older age subgroups in both sexes (p < 0.001); however, there was no statistically significant difference in the amount of suture separation between male and female in all age subgroups. CONCLUSIONS: Older patients treated with MARPE, particularly in male, may have a reduced likelihood of both success in suture separation and sufficient basal bone expansion. CLINICAL RELEVANCE: This study demonstrates that clinicians should consider that the success rate of MARPE and the amount of suture separation may depend on chronological age and sex.

Morphologic changes of the incisive canal and its proximity to maxillary incisor roots after anterior tooth movement.

INTRODUCTION: The objectives were to evaluate the morphologic changes of the incisive canal (IC) and the influence of IC proximity to apical root resorption of maxillary central incisors after anterior tooth movement. METHODS: Pretreatment and posttreatment cone-beam computed tomography images of adults (aged 18-47 years) were retrospectively evaluated. Subjects were divided into control group with minimal incisor movement (n = 32; maxillary incisor tip movement <2 mm) and maximum retraction group (n = 35; maxillary incisor tip movement >4 mm). The shape, direction, morphologic changes of the IC, the proximity of the central incisor root to IC, and the amount of apical root resorption associated with the proximity after orthodontic treatment were compared. RESULTS: Changes in the shape of the IC were not observed in both control and retraction groups. However, 11.4% (4 of 35 subjects) in the retraction group indicated changes in the direction of the IC from slanted-straight to slanted-curved type after the direction of anterior retraction. The thickness of the cortical bone surrounding the IC and the distance between the incisor root and IC significantly decreased after orthodontic treatment in both groups (P <0.05). However, these changes were significantly greater in the retraction group than in control (P <0.0001). Contact or invasion of the incisor root to the IC was more prominent in the retraction group (42.8%-54.3%) than the control (10.9%-12.5%) (P <0.0001). The amount of root resorption indicated a tendency to increase in the order of separation, approximation, contact, and invasion in relation to IC. CONCLUSIONS: Although remodeling of IC was evident in some patients, contact or invasion of the maxillary central incisor roots to IC was fairly high after maximum anterior retraction.

Long-term follow-up of a patient with deepbite and severely resorbed maxillary central incisors treated by maxillary premolar and mandibular incisor extraction.

Deepbite is a common type of malocclusion, but it leads to difficulties in treatment and retention. We report the treatment of an adult patient with deepbite and severe crowding of teeth. Several teeth had to be restored, and the maxillary central incisors had short roots. Various treatment plans were considered, and extraction of the maxillary right and left first premolars, and mandibular right central incisor was planned. Successful treatment results were obtained with long-term retention.

Incidence and clinical risk factors associated with the development of labial protuberances after orthodontic treatment.

INTRODUCTION: Distinct, irregular, and hard, nodular labial protuberances (LPs) that were due to differential alveolar bone modeling can be noted on the labial gingival surface of the incisors after orthodontic treatment. Clinically, LPs cause patient discomfort and esthetic issues, but information on this phenomenon is limited. This study aimed to evaluate the incidence of LPs and demonstrate the etiology and clinical risk factors associated with this phenomenon. METHODS: Differential alveolar bone modeling was defined as present (+) when ≥1 distinct LPs (diameter >1 mm) developed after orthodontic treatment by comparing pretreatment and posttreatment intraoral photographs and casts of an orthodontic patient cohort treated with fixed appliances (n = 872). The incidence rate, affected sites, and their association with age, sex, and orthodontic treatment modalities were evaluated. RESULTS: The incidence rate of differential alveolar bone modeling among orthodontic patients was 3.2% (28 out of 872). The maxillary lateral incisor region was the most frequently affected site. Males (vs females) (odds ratio, 2.56 [95% confidence interval, 1.155-5.604]), adults (aged ≥ 20 years) (vs teens) (12.84 [3.003-54.866]), and those who had orthodontic extraction (vs nonextraction) (11.60 [3.434-39.156]) demonstrated significantly higher odds of developing LPs after orthodontic treatment (P <0.05). CONCLUSIONS: The incidence rate of the development of notable LPs after orthodontic treatment was 3.2%. Adult males and those who undergo orthodontic extraction have a higher risk of developing LPs. Clinicians should be aware that distinct LPs may develop when large amounts of incisal retraction are planned in adults.

Incisive canal remodelling following maximum anterior retraction reduces apical root resorption.

INTRODUCTION: The objectives were to visualize the incisive canal (IC) remodelling following maximum incisor retraction and to evaluate its impact on canal-invasion-associated apical root resorption. METHODS: Pre- and post-treatment CBCT images of 34 adult orthodontic patients (age 18-47 years) with a large amount of maxillary incisor retraction (>4 mm) using temporary anchorage devices (TADs) were retrospectively evaluated. Maxillary regional superimpositions and 3D models of the IC along with central incisors were used to measure the changes in IC dimension, IC invasion by the roots and IC remodelling. In addition, the association of the amount of apical root resorption with the root-IC relationship and IC remodelling were evaluated. RESULTS: IC invasion by the incisor roots following maximum retraction was seen in 53% (18 out of 34) of the cases. IC with larger volume and area showed more invasions compared with those with smaller volume and area (P < .01). The amount of root resorption was significantly higher with IC invasion than without invasion (2.39 mm vs 0.82 mm, P < .0001). IC remodelling following maximum retraction was seen in 24% of the subjects. IC remodelling group demonstrated less apical root resorption than the non-remodelling group (0.98 mm vs 3.27 mm, P < .0001). CONCLUSION: IC with larger volume and surface area before treatment were more likely to show canal invasion by the incisor roots after maximum retraction. IC invasion resulted in apical root resorption. However, approximately one-fourth of cases showed remodelling of the IC, which reduced the amount of root resorption.

Nonsurgical treatment of an adult with a skeletal Class III malocclusion combined with a functional anterior shift, severely overclosed vertical dimension, and a reverse smile.

This case report illustrates the successful nonsurgical treatment of an adult with a skeletal Class III malocclusion exacerbated by a functional anterior shift that resulted in a severe overclosure of the mandible and a reverse smile line. To maximize the soft tissue and smile esthetics while idealizing the occlusion, active clockwise rotation of the mandible was induced along with mandibular molar uprighting and sequential leveling. In the maxilla, full arch distalization was achieved after second molar extraction. The treatment provided a satisfying esthetic and functional outcome and has remained stable.

Dynamics of alveolar bone healing after the removal of orthodontic temporary anchorage devices.

OBJECTIVE: The aim of this study was to investigate the dynamics of alveolar bone formation and healing pattern after the removal of orthodontic temporary anchorage devices (TADs). METHODS: Miniscrews (N = 32) were inserted into the buccal inter-radicular alveolar bone in beagle dogs. Afterward, miniscrews were removed at different time points during a 13-week period and six different in vivo fluorescent markers were injected at 1, 2, 6, 8, 10, and 12 weeks. Serial changes in bone apposition at the removal and intact control sites were evaluated using µCT, histology, and bone histomorphometry. RESULTS: Gradual bone apposition at the TAD removal site was noted with bone volume/tissue volume (BV/TV) reaching the level of the control alveolar bone by 7 weeks. Histologically, newly formed woven bone was detected within the removal site which was distinct from the surrounding pre-existing alveolar bone at 13 weeks. Accelerated mineral apposition rate (MAR) and bone formation rate (BFR) were noted between 2 and 6 weeks in the removal site (P < 0.05). Although MAR and BFR gradually decreased after its peak at 2-4 weeks, BFR in the removal site was still higher than the control site at 10-12 weeks (P < 0.05). CONCLUSIONS: Spontaneous bone healing was noted after TAD removal with regional acceleration of MAR and BFR within 2-6 weeks. However, the removal site was mainly filled with woven bone even after 13 weeks, suggesting a longer healing period is required for the quality of the alveolar bone to reach levels comparable to the surrounding alveolar bone.

Local injection of RANKL facilitates tooth movement and alveolar bone remodelling.

OBJECTIVES: To investigate the effect of local injection of receptor activator of nuclear factor kappa B ligand (RANKL) on experimental tooth movement and subsequent alveolar bone remodelling in mice. MATERIALS AND METHODS: Sixty mice were randomised to receive daily local RANKL or phosphate-buffered saline injections in the buccal premaxillary bone for 14 of 21 days of incisor movement, followed by a 21-day retention period. Five mice from each group were euthanised on days 0, 3, 7, 14, 21 and 42, and specimens were prepared for haematoxylin and eosin, tartrate-resistant acid phosphatase and immunohistochemical staining. Five mice from each group were subjected to serial microcomputed tomography until day 42 for tooth movement and bone volume quantification. RESULTS: The experimental group showed significantly greater tooth movement and bone volume reduction on days 14 and 21; an increased osteoclast number on days 3, 7, 14 and 21; and no difference on day 42. Higher RANKL expression was observed on days 7 and 14, with remarkable alkaline phosphatase activity. No significant systemic changes were observed. CONCLUSION: Local RANKL injection leads to increased osteoclastic activity and facilitates tooth movement, followed by subsequent alveolar bone formation; this implies a reversible transitional acceleration of bone resorption.

Comparison of condylar position in orthognathic surgery cases treated with virtual surgical planning vs. conventional model planning.

OBJECTIVES: To assess the effect of virtual surgical planning (VSP) on the accuracy of condylar seating in surgical cases involving Bilateral Sagittal Split Osteotomy (BSSO). An additional aim was to quantify differences between actual surgical outcome and planned virtual outcome. SETTING AND SAMPLE POPULATION: A private practice in Charlotte North Carolina. Twenty-five consecutively operated subjects prepared with VSP and twenty consecutively subjects operated with conventional surgery planning were enrolled. MATERIAL AND METHODS: Cone beam computed tomography (CBCT) scans were obtained before surgery (T1) and post-surgery after splint removal (T2). The T1 and T2 CBCTs were superimposed on the anterior cranial base using voxel-based registration. Three dimensional (3D) models were built and oriented to a 3D Frankfurt horizontal. Displacement of corresponding condylar landmarks was measured. RESULTS: No significant difference was found between the VSP and conventional group in the magnitude of translation or rotation of the condyles following surgery. VSP surgical outcomes differed significantly from predicted positions at all landmarks. Virtual surgical planning does not prevent changes to condylar position as a result of surgery. Actual surgical results differed significantly from VSP-predicted outcomes. CONCLUSIONS: Virtual surgical planning did not reduce the changes to condylar position and angulation that resulted from conventionally planned orthognathic surgery.

Anchorage loss assessment of the indirect anchor tooth during adjunctive orthodontic treatment.

INTRODUCTION: This study quantitatively assessed movement of anchor teeth connected to a miniscrew (indirect anchor tooth) and investigated factors affecting movement during adjunctive orthodontic treatment. METHODS: Dental plaster models of 28 patients whose treatment included an indirect anchor tooth on one side were collected before and after treatment. The casts were digitally scanned, and 2 groups were constituted: the indirect anchor teeth (experimental group; n = 52) and the untreated teeth (control group; the first and second premolars opposing the indirect anchor tooth to which no orthodontic force was applied; n = 55). Pretreatment and posttreatment models were superimposed and the amount and direction of indirect anchor tooth movement were evaluated with the use of a univariate linear mixed model. Possible factors affecting movement of the indirect anchor tooth and its significance were also evaluated with the use of a multiple linear mixed model. RESULTS: The indirect anchor tooth moved 0.91 ± 0.50 mm and did not exhibit significant differences in the transverse, vertical, or sagittal directions. The location of the indirect anchor tooth affected movement and the tooth moved significantly more in the mandible than in the maxilla. CONCLUSIONS: The indirect anchor tooth can move during adjunctive orthodontic treatment and thus requires careful monitoring for occlusal changes.

A longitudinal comparison of body height growth of orthodontically treated Class I and Class III adolescents compared with the general population.

INTRODUCTION: The aim of this study was to evaluate the height growth of Class I and III orthodontic patients according to the Fishman skeletal maturation index (SMI) and to compare it with that of a general population. METHODS: The study sample included 81 Class I and 71 Class III adolescents who had height measurements and hand-wrist radiographs taken annually and categorized according to SMI. Height completion rate, residual height, height increase per sequential SMI stage, and height velocity were analyzed. Sex differences were evaluated and comparisons between Class I and Class III groups were made. In addition, the height of orthodontic patients was indirectly compared with that of the general population. RESULTS: In boys and girls, height completion rate was >90% at SMI 6, residual height was fewer than 10 cm at SMI 7, and height increase per sequential SMI stage was greatest from SMI 6 to SMI 7. Height velocity was greatest from SMI 5 to SMI 6 in boys and from SMI 4 to SMI 5 in girls. CONCLUSIONS: There was no significant difference in body height parameters for all SMI stages between Class I and Class III adolescents. Adolescents who had orthodontic treatment were not shorter in stature at growth completion compared with the general population.

Periodontal and root changes after orthodontic treatment in middle-aged adults are similar to those in young adults.

INTRODUCTION: The goal of this study was to compare the outcomes and amount of change in periodontal health of anterior teeth in young versus middle-aged adults, who were treated to improve anterior alignment and occlusion. METHODS: Pre- and posttreatment records including orthodontic casts, cephalograms, and standardized periapical radiographs were retrospectively collected from young adults (aged 19-30 years; n = 12) and middle-aged adults (aged ≥40 years; n = 27). Following the American Board of Orthodontics criteria, discrepancy index (DI), cast-radiograph evaluation (CRE), treatment duration (TD), marginal bone loss (MBL), and tooth length (TL) were measured, and with the use of periapical radiographs, changes in the level of marginal bone (MBC) and the amount of root resorption (RR) after orthodontic treatment were calculated. RESULTS: DI, MBL, and TD were significantly higher in the middle-aged adults than in the young adults (P < 0.05). However, CRE and MBC after treatment were similar between the 2 groups (P > 0.05). The mean amount of RR following treatment was -0.6 ± 0.44 mm and -1.0 ± 0.61 mm in young and middle-aged adults, respectively. The degree of RR after compensating for treatment complexity and TD was similar between the 2 groups (P > 0.05). CONCLUSIONS: Although the initial malocclusion and periodontal conditions were unfavorable for the middle-aged adults, the overall treatment and periodontal outcomes after orthodontic treatment of the anterior teeth were similar to those for young adults. It appears that older adults tolerate orthodontics to improve the appearance of the anterior teeth as well as younger adults, with no additional burden because of their increased age.

The 3-dimensional zone of the center of resistance of the mandibular posterior teeth segment.

INTRODUCTION: We sought the 3-dimensional (3D) zone of the center of resistance (ZCR) of mandibular posterior teeth groups (group 1: first molar; group 2: both molars; group 3: both molars and second premolar; group 4: both molars and both premolars) with the use of 3D finite element analysis. METHODS: 3D finite element models comprised the mandibular posterior teeth, periodontal ligament, and alveolar bone. In the symmetric bilateral model, a 100-g midline force was applied on a median sagittal plane at 0.1-mm intervals to determine the anteroposterior and vertical positions of the ZCR (where the applied force induced translation). The most reliable buccolingual position of the ZCR was then determined in the unilateral model. The combination of the anteroposterior, vertical, and buccolingual positions was defined as the ZCR. RESULTS: The ZCRs of groups 1-4 were, respectively, 0.48, 0.46, 0.50, and 0.53 of the mandibular first molar root length from the alveolar crest level and located slightly distobuccally at anteroposterior ratios of 2:3.0, 2:2.3, 2:2.4, and 2:2.5 to each sectional arch length and at buccolingual ratios of 2:1.5, 2:1.1, 2:1.6, and 2:2.4 to the first molar's buccolingual width. CONCLUSIONS: The ZCR can be a useful reference for 3D movement planning of mandibular posterior teeth or segments.