A Stiff, Tough, and Thermally Insulating Air- and Ice-Templated Plant-Based Foam.

By forming and directionally freezing an aqueous foam containing cellulose nanofibrils, methylcellulose, and tannic acid, we produced a stiff and tough anisotropic solid foam with low radial thermal conductivity. Along the ice-templating direction, the foam was as stiff as nanocellulose-clay composites, despite being primarily methylcellulose by mass. The foam was also stiff perpendicular to the direction of ice growth, while maintaining λr < 25 mW m-1 K-1 for a relative humidity (RH) up to 65% and <30 mW m-1 K-1 at 80% RH. This work introduces the tandem use of two practical techniques, foam formation and directional freezing, to generate a low-density anisotropic material, and this strategy could be applied to other aqueous systems where foam formation is possible.

Intracrystalline Transport Barriers Affecting the Self-Diffusion of CH4 in Zeolites |Na12|-A and |Na12-xKx|-A.

Carbon dioxide must be removed from biogas or natural gas to obtain compressed or liquefied methane, and adsorption-driven isolation of CO2 could be improved by developing new adsorbents. Zeolite adsorbents can select CO2 over CH4, and the adsorption of CH4 on zeolite |Na12-xKx|-A is significantly lower for samples with a high K+ content, i.e., x > 2. Nevertheless, we show, using 1H NMR experiments, that these zeolites adsorb CH4 after long equilibration times. Pulsed-field gradient NMR experiments indicated that in large crystals of zeolites |Na12-xKx|-A, the long-time diffusion coefficients of CH4 did not vary with x, and the upper limit of the mean-square displacement was about 1.5 µm, irrespective of the diffusion time. Also for zeolite |Na12|-A samples of three different particle sizes (∼0.44, ∼2.9, and ∼10.6 µm), the upper limit of the mean-square displacement of CH4 was 1.5 µm and largely independent of the diffusion time. This similarity provided further evidence for an intracrystalline diffusion restriction for CH4 within the medium- and large-sized zeolite A crystals and possibly of clustering and close contact among the small zeolite A crystals. The upper limit of the long-time diffusion coefficient of adsorbed CH4 was (at 1 atm and 298 K) about 10-10 m2/s irrespective of the size of the zeolite particle or the studied content of K+ in zeolites |Na12-xKx|-A and |Na12|-A. The T1 relaxation time for adsorbed CH4 on zeolites |Na12-xKx|-A with x > 2 was smaller than for those with x < 2, indicating that the short-time diffusion of CH4 was hindered.

Dispersed Uniform Nanoparticles from a Macroscopic Organosilica Powder.

A colloidal dispersion of uniform organosilica nanoparticles could be produced via the disassembly of the non-surfactant-templated organosilica powder nanostructured folate material (NFM-1). This unusual reaction pathway was available because the folate and silica-containing moieties in NFM-1 are held together by noncovalent interactions. No precipitation was observed from the colloidal dispersion after a week, though particle growth occurred at a solvent-dependent rate that could be described by the Lifshitz-Slyozov-Wagner equation. An organosilica film that was prepared from the colloidal dispersion adsorbed folate-binding protein from solution but adsorbed ions from a phosphate-buffered saline solution to a larger degree. To our knowledge, this is the first instance of a colloidal dispersion of organosilica nanoparticles being derived from a macroscopic material rather than from molecular precursors.

Site Isolation Leads to Stable Photocatalytic Reduction of CO2 over a Rhenium-Based Catalyst.

A porous organic polymer incorporating [(α-diimine)Re(CO)3Cl] moieties was produced and tested in the photocatalytic reduction of CO2, with NEt3 as a sacrificial donor. The catalyst generated both H2 and CO, although the Re moiety was not required for H2 generation. After an induction period, the Re-containing porous organic polymer produced CO at a stable rate, unless soluble [(bpy)Re(CO)3Cl] (bpy=2,2'-bipyridine) was added. This provides the strongest evidence to date that [(α-diimine)Re(CO)3Cl] catalysts for photocatalytic CO2 reduction decompose through a bimetallic pathway.

A microporous polymer based on nonconjugated hindered biphenyls that emits blue light.

Microporous organic polymers that have three-dimensional connectivity stemming from monomers with tetrahedral or tetrahedron-like geometry can have high surface areas and strong fluorescence. There are however few examples of such polymers based on hindered biaryls, and their fluorescence has not been studied. Hypothesizing that the contortion in a hindered biphenyl moiety would modulate the optical properties of a polymer built from it, we synthesized a meta-enchained polyphenylene from a 2,2',6,6'-tetramethylbiphenyl-based monomer, in which the two phenyl rings are nearly mutually perpendicular. The polymer was microporous with SBET = 495 m2 g-1. The polymer absorbed near-UV light and emitted blue fluorescence despite the meta-enchainment that would have been expected to break the conjugation. A related copolymer, synthesized from 2,2',6,6'-tetramethylbiphenyl-based and unsubstituted biphenyl-based monomers, was microporous but not fluorescent.

Precapture of CO2 and Hydrogenation into Methanol on Heterogenized Ruthenium and Amine-Rich Catalytic Systems.

A heterogenized alternative to the homogeneous precapture of CO2 with amines and subsequent hydrogenation to MeOH was developed using aminated silica and a Ru-MACHOTM catalyst. Commercial mesoporous silica was modified with three different amino-silane monomers and used as support for the Ru catalyst. These composites were studied by TEM and solid-state NMR spectroscopy before and after the catalytic reaction. These catalytic reactions were conducted at 155 °C at a H2 and CO2 pressures of 75 and 2 bar, respectively, with the heterogeneous system (gas-solid) being probed with gas-phase infrared spectroscopy used to quantify the resulting products. High turnover number (TON) values were observed for the samples aminated with secondary amines.

Toxicity, Uptake, and Translocation of Engineered Nanomaterials in Vascular plants.

To exploit the promised benefits of engineered nanomaterials, it is necessary to improve our knowledge of their bioavailability and toxicity. The interactions between engineered nanomaterials and vascular plants are of particular concern, as plants closely interact with soil, water, and the atmosphere, and constitute one of the main routes of exposure for higher species, i.e. accumulation through the food chain. A review of the current literature shows contradictory evidence on the phytotoxicity of engineered nanomaterials. The mechanisms by which engineered nanomaterials penetrate plants are not well understood, and further research on their interactions with vascular plants is required to enable the field of phytotoxicology to keep pace with that of nanotechnology, the rapid evolution of which constantly produces new materials and applications that accelerate the environmental release of nanomaterials.

Novel CaO-SiO2 sorbent and bifunctional Ni/Co-CaO/SiO2 complex for selective H2 synthesis from cellulose.

Catalysis- and sorption-enhanced biomass gasification is a promising route to high-purity hydrogen (H(2)); however, most CaO-based sorbents for CO(2) capture have poor surface area and mechanical properties, lose carrying capacity over multiple uses, and have insufficient porosity to accommodate extra catalyst sites. We aimed to develop a high-surface-area CaO-SiO(2) framework onto which catalysts could be grafted. The best CaO-SiO(2) sorbent (n(Ca)/n(Si) = 2:1) maintained a CaO conversion of 65% even after 50 carbonation-decarbonation cycles, better than commercial micrometer-sized CaO or tailored CaO, because of stabilization via Ca-O-Si interactions and an ordered porous structure. Bimetallic catalyst grains (Ni/Co alloy, <20 nm) could be evenly loaded onto this structure by impregnation. The resulting bifunctional complex produced H(2) at nearly the same rate as a mixture of catalyst and commercial CaO while using less total sorbent/catalyst. Furthermore, this complex was much more durable due to its higher coking resistance and stable structure. After 25 carbonation-decarbonation cycles, the new catalyst-sorbent complex enhanced the H(2) yield from cellulose far more than a mixture of catalyst and commercial CaO did following the same treatment.

The electrochemical reduction of a flexible Mn(II) salen-based metal-organic framework.

A new metal-organic framework (MOF) containing a Mn(II) salen complex (BET surface area = 967 ± 6 m2 g-1) undergoes a reversible crystalline-to-amorphous transformation. Experimental studies and computational calculations show that the MOF is stable to a one-electron reduction at more anodic potentials than the corresponding discrete complex.

Iridium-N,P-ligand-catalyzed enantioselective hydrogenation of diphenylvinylphosphine oxides and vinylphosphonates.

Diphenylvinylphosphine oxides and di- and trisubstituted vinylphosphonates have been employed as substrates in iridium-catalyzed asymmetric hydrogenations. Complete conversions and excellent enantioselectivities (up to and above 99% ee) were observed for a range of substrates with both aromatic and aliphatic groups at the prochiral carbon. We have also hydrogenated electron-deficient carboxyethylvinylphosphonates with excellent stereoselectivity (up to and above 99% ee). The hydrogenated products of both classes of substrates are synthetically useful intermediates.

Iridium-catalyzed asymmetric hydrogenation yielding chiral diarylmethines with weakly coordinating or noncoordinating substituents.

Diarylmethine-containing stereocenters are present in pharmaceuticals and natural products, making the synthetic methods that form these chiral centers are important in industry. We have applied iridium complexes with novel N,P-chelating ligands to the asymmetric hydrogenation of trisubstituted olefins, forming diarylmethine chiral centers in high conversions and excellent enantioselectivities (up to 99% ee) for a broad range of substrates. Our results support the hypothesis that steric hindrance in one specific area of the catalyst is playing a key role in stereoselection, as the hydrogenation of substrates differing little at the prochiral carbon occurred with high enantioselectivity. As a result, excellent stereodiscrimination was obtained even when the prochiral carbon bore, for example, phenyl and p-tolyl groups.

Activated Carbons from Hydrochars Prepared in Milk.

Hydrothermal carbonization converts organics in aqueous suspension to a mixture of liquid components and carbon-rich solids (hydrochars), which in turn can be processed into activated carbons. We investigated whether milk could be used as a medium for hydrothermal carbonization, and found that hydrochars prepared from milk, with or without an added fibrous biomass, contained more carbon (particularly aliphatic carbon), less oxygen, and more mineral components than those prepared from fibrous biomass in water. Activated carbons produced from hydrochars generated in milk had lower specific surface areas and CO2 capacities than those from hydrochars formed in water; however, these differences disappeared upon normalizing to the combustible mass of the solid. Thus, in the context of N2 and CO2 uptake on activated carbons, the primary effect of using milk rather than water to form the hydrochar precursor was to contribute inorganic mass that adsorbed little CO2. Nevertheless, some of the activated carbons generated from hydrochars formed in milk had specific CO2 uptake capacities in the normal range for activated carbons prepared by activation in CO2 (here, up to 1.6 mmol g-1 CO2 at 15 kPa and 0 °C). Thus, hydrothermal carbonization could be used to convert waste milk to hydrochars and activated carbons.

Insights into Functionalization of Metal-Organic Frameworks Using In Situ NMR Spectroscopy.

Postsynthetic reactions of metal-organic frameworks (MOFs) are versatile tools for producing functional materials, but the methods of evaluating these reactions are cumbersome and destructive. Here we demonstrate and validate the use of in situ NMR spectroscopy of species in the liquid state to examine solvent-assisted ligand exchange (SALE) and postsynthetic modification (PSM) reactions of metal-organic frameworks. This technique allows functionalization to be monitored over time without decomposing the product for analysis, which simplifies reaction screening. In the case of SALE, both the added ligand and the ligand leaving the framework can be observed. We demonstrate this in situ method by examining SALE and PSM reactions of the robust zirconium MOF UiO-67 as well as SALE with the aluminum MOF DUT-5. In situ NMR spectroscopy provided insights into the reactions studied, and we expect that future studies using this method will permit the examination of a variety of MOF-solute reactions.

Carbonylation of heterocycles by homogeneous catalysts.

This article summarizes the recent developments (particularly the uses of homogeneous organometallic catalysts) in ring-opening carbonylations, ring-opening carbonylative polymerizations and ring-expansion carbonylations of heterocycles such as epoxides, aziridines, lactones and oxazolines.

A New Raman Metric for the Characterisation of Graphene oxide and its Derivatives.

Raman spectroscopy is among the primary techniques for the characterisation of graphene materials, as it provides insights into the quality of measured graphenes including their structure and conductivity as well as the presence of dopants. However, our ability to draw conclusions based on such spectra is limited by a lack of understanding regarding the origins of the peaks. Consequently, traditional characterisation techniques, which estimate the quality of the graphene material using the intensity ratio between the D and the G peaks, are unreliable for both GO and rGO. Herein we reanalyse the Raman spectra of graphenes and show that traditional methods rely upon an apparent G peak which is in fact a superposition of the G and D' peaks. We use this understanding to develop a new Raman characterisation method for graphenes that considers the D' peak by using its overtone the 2D'. We demonstrate the superiority and consistency of this method for calculating the oxygen content of graphenes, and use the relationship between the D' peak and graphene quality to define three regimes. This has important implications for purification techniques because, once GO is reduced beyond a critical threshold, further reduction offers limited gain in conductivity.

Tuning the cavities of zirconium-based MIL-140 frameworks to modulate CO2 adsorption.

A combined experimental and computational study has revealed the interplay between the framework pore size and functionality on the CO2 adsorption performance of zirconium-based MIL-140 frameworks. The CO2-sorbent interactions were markedly influenced by pore-confinement effects which arise from the π-stacked arrangement of the ligands within the framework backbone.

A simple gas-solid route to functionalize ordered carbon.

The reaction of nitric oxide (NO) and carbonaceous materials generates nitrogen functionalities on and in graphitic carbons and oxidizes some of the carbon. Here, we have exploited these phenomena to provide a novel route to surface-functionalized multiwalled carbon nanotubes (MWCNTs). We investigated the impacts of NO on the physical and chemical properties of industrially synthesized multiwalled carbon nanotubes to find a facile treatment that increased the specific surface area (SBET) of the MWCNTs by ∼20%, with only a minimal effect on their degree of graphitization. The technique caused less material loss (∼12 wt %) than traditional gas-based activation techniques and grafted some nitrogen functional groups (1.1 at. %) on the MWCNTs. Moreover, we found that Ni nanoparticles deposited on NO-treated MWCNTs had a crystallite size of dNi = 13.1 nm, similar to those deposited on acid-treated MWCNTs (dNi = 14.2 nm), and clearly much smaller than those deposited under the same conditions on untreated MWCNTs (dNi = 18.3 nm).

Effect of CeO2 addition to Al2O3 supports for Pt catalysts on the aqueous-phase reforming of glycerol.

A series of Pt catalysts supported on Al2O3 that was doped with different amounts of CeO2 was developed, characterized, and tested in the aqueous-phase reforming (APR) of glycerol to H2. Catalyst 3Pt/3CeAl, which bore 3 wt% Pt on a support that contained 3 wt % CeO2, showed the highest carbon conversion to gas (85%) and the highest H2 yield (80%) for a feedstock of 1 wt% glycerol in water at 240 °C and 40 bar. A CeO2/Al2O3 support with only 1 wt% Pt also showed high H2 selectivity and carbon conversion to gas, as well as a much lower CH4 yield than the benchmark 3Pt/Al catalyst, clearly demonstrating that doping the support with 3 wt% CeO2 improved the APR of glycerol. H2 chemisorption results showed that the highest metal dispersion (58%) and active surface area (4.3 m(2)g(-1)) were achieved for the support that contained 3 wt% CeO2, and this effect appeared to be primarily responsible for the high H2 yield and carbon conversion to gas. No CO was observed in the product gas; therefore, this gas could potentially be used directly in proton exchange membrane fuel cells. Thus, including CeO2 in the Al2O3 catalyst support enhanced both the activity and selectivity towards H2 of a Pt catalyst for the APR of glycerol.

Multiwalled carbon nanotubes in alfalfa and wheat: toxicology and uptake.

Data on the bioavailability and toxicity of carbon nanotubes (CNTs) in the environment, and, in particular, on their interactions with vascular plants, are limited. We investigated the effects of industrial-grade multiwalled CNTs (75 wt% CNTs) and their impurities on alfalfa and wheat. Phytotoxicity assays were performed during both seed germination and seedling growth. The germinations of both species were tolerant of up to 2560 mg l(-1) CNTs, and root elongation was enhanced in alfalfa and wheat seedlings exposed to CNTs. Remarkably, catalyst impurities also enhanced root elongation in alfalfa seedlings as well as wheat germination. Thus the impurities, not solely the CNTs, impacted the plants. CNT internalization by plants was investigated using electron microscopy and two-dimensional Raman mapping. The latter showed that CNTs were adsorbed onto the root surfaces of alfalfa and wheat without significant uptake or translocation. Electron microscopy investigations of internalization were inconclusive owing to poor contrast, so Fe(3)O(4)-functionalized CNTs were prepared and studied using energy-filter mapping of Fe(3)O(4). CNTs bearing Fe(3)O(4) nanoparticles were detected in the epidermis of one wheat root tip only, suggesting that internalization was possible but unusual. Thus, alfalfa and wheat tolerated high concentrations of industrial-grade multiwalled CNTs, which adsorbed onto their roots but were rarely taken up.