Patterning damage mechanisms for two-dimensional crystalline polymers and evaluation for a conjugated imine-based polymer.

High-quality patterning determines the properties of patterned emerging two-dimensional (2D) conjugated polymers and is essential for potential applications in future electronic nanodevices. However, the most suitable patterning method for 2D polymers has yet to be determined because we still do not have a comprehensive understanding of their damage mechanisms by visualizing the structural modification that occurs during the patterning process. Here, the damage mechanisms during patterning of 2D polymers, induced by various patterning methods, are unveiled based on a systematic study of structural damage and edge morphology in an imine-based 2D polymer (polyimine). Patterning using a focused electron beam, focused ion beam (FIB) and mechanical carving is evaluated. The focused electron beam successively introduces a sputtering effect, knock-on displacement damage and massive radiolysis with increasing electron dose from9.46×107electrons nm-2to1.14×1010electrons nm-2. Successful patterning is enabled by knock-on damage but impeded by carbon contamination beyond a critical sample thickness. A FIB creates current-dependent edge morphologies and extensive damage from ion implantation caused by the tail of the unfocused beam. A precisely controlled tip can tear the polyimine film through grain boundaries and hence create a patterning edge with suitable edge roughness for certain application scenarios when beam damage is avoided. Taking structural damage and the resulting quantitative edge roughness into consideration, this study provides a detailed instruction on the proper patterning techniques for 2D crystalline polymers and paves the way for tailored intrinsic properties and device fabrication using these novel materials.

Pr3+-doped YPO4 nanocrystal embedded into an optical fiber.

Optical fiber with YPO4:Pr3+ nanocrystals (NCs) is presented for the first time using the glass powder-NCs doping method. The method's advantage is separate preparation of NCs and glass to preserve luminescent and optical properties of NCs once they are incorporated into optical fiber. The YPO4:Pr3+ nanocrystals were synthesized by the co-precipitation and hydrothermal methods, optimized for size (< 100 nm), shape, Pr3+ ions concentration (0.2 mol%), and emission lifetime. The core glass was selected from the non-silica P2O5-containing system with refractive index (n = 1.788) close to the NCs (no = 1.657, ne = 1.838). Optical fiber was drawn by modified powder-in-tube method after pre-sintering of glass powder-YPO4:Pr3+ (wt 3%) mixture to form optical fiber preform. Luminescent properties of YPO4:Pr3+ and optical fiber showed their excellent agreement, including sharp Pr3+ emission at 600 nm (1D2-3H4) and 1D2 level lifetime (τ = 156 ± 5 µs) under 488 nm excitation. The distribution of the YPO4:Pr3+ NCs in optical fiber were analyzed by TEM-EDS in the core region (FIB-SEM-prepared). The successful usage of glass powder-NCs doping method was discussed in the aspect of promising properties of the first YPO4:Pr3+ doped optical fiber as a new way to develop active materials for lasing applications, among others.