Comparing NISAR (Using Sentinel-1), USDA/NASS CDL, and Ground Truth Crop/Non-Crop Areas in an Urban Agricultural Region.

A general limitation in assessing the accuracy of land cover mapping is the availability of ground truth data. At sites where ground truth is not available, potentially inaccurate proxy datasets are used for sub-field-scale resolution investigations at large spatial scales, i.e., in the Contiguous United States. The USDA/NASS Cropland Data Layer (CDL) is a popular agricultural land cover dataset due to its high accuracy (>80%), resolution (30 m), and inclusions of many land cover and crop types. However, because the CDL is derived from satellite imagery and has resulting uncertainties, comparisons to available in situ data are necessary for verifying classification performance. This study compares the cropland mapping accuracies (crop/non-crop) of an optical approach (CDL) and the radar-based crop area (CA) approach used for the upcoming NASA-ISRO Synthetic Aperture Radar (NISAR) L- and S-band mission but using Sentinel-1 C-band data. CDL and CA performance are compared to ground truth data that includes 54 agricultural production and research fields located at USDA's Beltsville Agricultural Research Center (BARC) in Maryland, USA. We also evaluate non-crop mapping accuracy using twenty-six built-up and thirteen forest sites at BARC. The results show that the CDL and CA have a good pixel-wise agreement with one another (87%). However, the CA is notably more accurate compared to ground truth data than the CDL. The 2017-2021 mean accuracies for the CDL and CA, respectively, are 77% and 96% for crop, 100% and 94% for built-up, and 100% and 100% for forest, yielding an overall accuracy of 86% for the CDL and 96% for CA. This difference mainly stems from the CDL under-detecting crop cover at BARC, especially in 2017 and 2018. We also note that annual accuracy levels varied less for the CA (91-98%) than for the CDL (79-93%). This study demonstrates that a computationally inexpensive radar-based cropland mapping approach can also give accurate results over complex landscapes with accuracies similar to or better than optical approaches.

Uncertainty in Soil Moisture Retrievals: an Ensemble Approach using SMOS L-Band Microwave Data.

The uncertainty of surface soil moisture (SM) retrievals from satellite brightness temperature (TB) observations depends primarily on the choice of radiative transfer model (RTM) parameters, prior SM information and TB inputs. This paper studies the sensitivity of several established and experimental SM retrieval products from the Soil Moisture Ocean Salinity (SMOS) mission to these choices at 11 reference sites, located in 7 watersheds across the United States (US). Different RTM parameter sets cause large biases between retrievals. Whereas typical RTM parameter sets are calibrated for SM retrievals, it is shown that a parameter set carefully optimized for TB forward modeling can also be used for retrieving SM. It is also shown that the inclusion of dynamic prior SM estimates in a Bayesian retrieval scheme can strongly improve SM retrievals, regardless of the choice of RTM parameters. The second part of this paper evaluates the ensemble uncertainty metrics for SM retrievals obtained by propagating a wide range of RTM parameters through the RTM, and the relationship with time series metrics obtained by comparing SM retrievals with in situ data. As expected for bounded variables, the total spread in the ensemble SM retrievals is smallest for wet and dry SM values and highest for intermediate SM values. After removal of the strong long-term SM bias associated with the RTM parameter values for individual ensemble members, the remaining anomaly ensemble SM spread shows higher values when SM deviates further from its long-term mean SM. This reveals higher-order biases (e.g. differences in variances) in the retrieval error, which should be considered when characterizing retrieval error. The time-average anomaly ensemble SM spread of 0.037 m3/m3 approximates the actual time series unbiased root-mean-square-difference of 0.042 m3/m3 between ensemble mean retrievals and in situ data across the reference sites.

Development and Assessment of the SMAP Enhanced Passive Soil Moisture Product.

Launched in January 2015, the National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) observatory was designed to provide frequent global mapping of high-resolution soil moisture and freeze-thaw state every two to three days using a radar and a radiometer operating at L-band frequencies. Despite a hardware mishap that rendered the radar inoperable shortly after launch, the radiometer continues to operate nominally, returning more than two years of science data that have helped to improve existing hydrological applications and foster new ones. Beginning in late 2016 the SMAP project launched a suite of new data products with the objective of recovering some high-resolution observation capability loss resulting from the radar malfunction. Among these new data products are the SMAP Enhanced Passive Soil Moisture Product that was released in December 2016, followed by the SMAP/Sentinel-1 Active-Passive Soil Moisture Product in April 2017. This article covers the development and assessment of the SMAP Level 2 Enhanced Passive Soil Moisture Product (L2_SM_P_E). The product distinguishes itself from the current SMAP Level 2 Passive Soil Moisture Product (L2_SM_P) in that the soil moisture retrieval is posted on a 9 km grid instead of a 36 km grid. This is made possible by first applying the Backus-Gilbert optimal interpolation technique to the antenna temperature (TA) data in the original SMAP Level 1B Brightness Temperature Product to take advantage of the overlapped radiometer footprints on orbit. The resulting interpolated TA data then go through various correction/calibration procedures to become the SMAP Level 1C Enhanced Brightness Temperature Product (LiC_TB_E). The LiC_TB_E product, posted on a 9 km grid, is then used as the primary input to the current operational SMAP baseline soil moisture retrieval algorithm to produce L2_SM_P_E as the final output. Images of the new product reveal enhanced visual features that are not apparent in the standard product. Based on in situ data from core validation sites and sparse networks representing different seasons and biomes all over the world, comparisons between L2_SM_P_E and in situ data were performed for the duration of April 1, 2015 - October 30, 2016. It was found that the performance of the enhanced 9 km L2_SM_P_E is equivalent to that of the standard 36 km L2_SM_P, attaining a retrieval uncertainty below 0.040 m3/m3 unbiased root-mean-square error (ubRMSE) and a correlation coefficient above 0.800. This assessment also affirmed that the Single Channel Algorithm using the V-polarized TB channel (SCA-V) delivered the best retrieval performance among the various algorithms implemented for L2_SM_P_E, a result similar to a previous assessment for L2_SM_P.

Combined Radar-Radiometer Surface Soil Moisture and Roughness Estimation.

A robust physics-based combined radar-radiometer, or Active-Passive, surface soil moisture and roughness estimation methodology is presented. Soil moisture and roughness retrieval is performed via optimization, i.e., minimization, of a joint objective function which constrains similar resolution radar and radiometer observations simultaneously. A data-driven and noise-dependent regularization term has also been developed to automatically regularize and balance corresponding radar and radiometer contributions to achieve optimal soil moisture retrievals. It is shown that in order to compensate for measurement and observation noise, as well as forward model inaccuracies, in combined radar-radiometer estimation surface roughness can be considered a free parameter. Extensive Monte-Carlo numerical simulations and assessment using field data have been performed to both evaluate the algorithm's performance and to demonstrate soil moisture estimation. Unbiased root mean squared errors (RMSE) range from 0.18 to 0.03 cm3/cm3 for two different land cover types of corn and soybean. In summary, in the context of soil moisture retrieval, the importance of consistent forward emission and scattering development is discussed and presented.

Surface Soil Moisture Retrieval Using the L-Band Synthetic Aperture Radar Onboard the Soil Moisture Active-Passive Satellite and Evaluation at Core Validation Sites.

This paper evaluates the retrieval of soil moisture in the top 5-cm layer at 3-km spatial resolution using L-band dual-copolarized Soil Moisture Active-Passive (SMAP) synthetic aperture radar (SAR) data that mapped the globe every three days from mid-April to early July, 2015. Surface soil moisture retrievals using radar observations have been challenging in the past due to complicating factors of surface roughness and vegetation scattering. Here, physically based forward models of radar scattering for individual vegetation types are inverted using a time-series approach to retrieve soil moisture while correcting for the effects of static roughness and dynamic vegetation. Compared with the past studies in homogeneous field scales, this paper performs a stringent test with the satellite data in the presence of terrain slope, subpixel heterogeneity, and vegetation growth. The retrieval process also addresses any deficiencies in the forward model by removing any time-averaged bias between model and observations and by adjusting the strength of vegetation contributions. The retrievals are assessed at 14 core validation sites representing a wide range of global soil and vegetation conditions over grass, pasture, shrub, woody savanna, corn, wheat, and soybean fields. The predictions of the forward models used agree with SMAP measurements to within 0.5 dB unbiased-root-mean-square error (ubRMSE) and -0.05 dB (bias) for both copolarizations. Soil moisture retrievals have an accuracy of 0.052 m3/m3 ubRMSE, -0.015 m3/m3 bias, and a correlation of 0.50, compared to in situ measurements, thus meeting the accuracy target of 0.06 m3/m3 ubRMSE. The successful retrieval demonstrates the feasibility of a physically based time series retrieval with L-band SAR data for characterizing soil moisture over diverse conditions of soil moisture, surface roughness, and vegetation.

Upper washita river experimental watersheds: multiyear stability of soil water content profiles.

Scaling in situ soil water content time series data to a large spatial domain is a key element of watershed environmental monitoring and modeling. The primary method of estimating and monitoring large-scale soil water content distributions is via in situ networks. It is critical to establish the stability of in situ networks when deploying them to study hydrologic systems. Two watersheds in Oklahoma, the Little Washita River Experimental Watershed (LWREW) and the Fort Cobb Reservoir Experimental Watershed (FCREW), are two prime examples of well-equipped research watersheds that provide long-term measurements of atmospheric and soil water content from in situ networks. The soil water content measurement network on the LWREW has been in operation since 2002, with 20 stations available for investigating soil water dynamics at the watershed scale. Temporal stability analysis of the network is complicated by the changing configuration of the network, but it is possible to determine a singular long-term average for the network. The FCREW consists of 15 soil water content stations and began operation in 2007, providing detailed information across a mixed agricultural domain and was determined to be stable and representative of the region. This study reinforces the applicability of temporal stability analysis to very long time scales, which are now becoming available for soil moisture monitoring. Each of these networks is temporally stable with respect to soil water content at each depth on a spatial basis. The LWREW has a persistent pattern through the root zone profile, but the FCREW does not, which requires further investigation.

A global daily soil moisture dataset derived from Chinese FengYun Microwave Radiation Imager (MWRI)(2010-2019).

Surface soil moisture (SSM) is an important variable in drought monitoring, floods predicting, weather forecasting, etc. and plays a critical role in water and heat exchanges between land and atmosphere. SSM products from L-band observations, such as the Soil Moisture Active Passive (SMAP) Mission, have proven to be optimal global estimations. Although X-band has a lower sensitivity to soil moisture than that of L-band, Chinese FengYun-3 series satellites (FY-3A/B/C/D) have provided sustainable and daily multiple SSM products from X-band since 2008. This research developed a new global SSM product (NNsm-FY) from FY-3B MWRI from 2010 to 2019, transferred high accuracy of SMAP L-band to FY-3B X-band. The NNsm-FY shows good agreement with in-situ observations and SMAP product and has a higher accuracy than that of official FY-3B product. With this new dataset, Chinese FY-3 satellites may play a larger role and provide opportunities of sustainable and longer-term soil moisture data record for hydrological study.

In situ Soil Moisture Sensors in Undisturbed Soils.

Soil moisture directly affects operational hydrology, food security, ecosystem services, and the climate system. However, the adoption of soil moisture data has been slow due to inconsistent data collection, poor standardization, and typically short record duration. Soil moisture, or quantitatively volumetric soil water content (SWC), is measured using buried, in situ sensors that infer SWC from an electromagnetic response. This signal can vary considerably with local site conditions such as clay content and mineralogy, soil salinity or bulk electrical conductivity, and soil temperature; each of these can have varying impacts depending on the sensor technology. Furthermore, poor soil contact and sensor degradation can affect the quality of these readings over time. Unlike more traditional environmental sensors, there are no accepted standards, maintenance practices, or quality controls for SWC data. As such, SWC is a challenging measurement for many environmental monitoring networks to implement. Here, we attempt to establish a community-based standard of practice for in situ SWC sensors so that future research and applications have consistent guidance on site selection, sensor installation, data interpretation, and long-term maintenance of monitoring stations. The videography focuses on a multi-agency consensus of best-practices and recommendations for the installation of in situ SWC sensors. This paper presents an overview of this protocol along with the various steps essential for high-quality and long-term SWC data collection. This protocol will be of use to scientists and engineers hoping to deploy a single station or an entire network.

A long term global daily soil moisture dataset derived from AMSR-E and AMSR2 (2002-2019).

Long term surface soil moisture (SSM) data with stable and consistent quality are critical for global environment and climate change monitoring. L band radiometers onboard the recently launched Soil Moisture Active Passive (SMAP) Mission can provide the state-of-the-art accuracy SSM, while Advanced Microwave Scanning Radiometer for EOS (AMSR-E) and AMSR2 series provide long term observational records of multi-frequency radiometers (C, X, and K bands). This study transfers the merits of SMAP to AMSR-E/2, and develops a global daily SSM dataset (named as NNsm) with stable and consistent quality at a 36 km resolution (2002-2019). The NNsm can reproduce the SMAP SSM accurately, with a global Root Mean Square Error (RMSE) of 0.029 m3/m3. NNsm also compares well with in situ SSM observations, and outperforms AMSR-E/2 standard SSM products from JAXA and LPRM. This global observation-driven dataset spans nearly two decades at present, and is extendable through the ongoing AMSR2 and upcoming AMSR3 missions for long-term studies of climate extremes, trends, and decadal variability.

Tracking Red Palm Mite Damage in the Western Hemisphere Invasion with Landsat Remote Sensing Data.

Red palm mites (Raoiella indica Hirst, Acari: Tenuipalpidae) were first observed in the western hemisphere on the islands and countries surrounding the Caribbean Sea, infesting the coconut palm (Cocos nucifera L.). Detection of invasive pests usually relies upon changes in vegetation properties as result of the pest activity. These changes may be visible in time series of satellite data records, such as Landsat satellites, which have been available with a 16-day repeat cycle at a spatial resolution of 30 m since 1982. Typical red palm mite infestations result in the yellowing of the lower leaves of the palm crown; remote sensing model simulations have indicated that this feature may be better detected using the green normalized difference vegetation index (GNDVI). Using the Google Earth Engine programming environment, a time series of Landsat 5 Thematic Mapper, Landsat 7 Enhanced Thematic Mapper Plus and Landsat 8 Operational Land Imager data was generated for plantations in northern and northeast Brazil, El Salvador, and Trinidad-Tobago. Considering the available studied plantations, there were little or no differences of GNDVI before and after the dates when red palm mites were first revealed at each location. A discussion of possible alternative approaches are discussed related to the limitations of the current satellite platforms.