RESUMEN
Multimode interference (MMI) devices are key components in modern integrated photonic circuits. Here, we present acoustically tuned optical switches on an (Al,Ga)As platform that enable robust, compact and fast response systems improving on recently demonstrated technology. The device consists of a 2 × 2 MMI device fine-tuned in its center region by a focused surface acoustic wave (SAW) beam working in the low GHz range. In this way, we can tune the refractive index profile over a narrow modulation region and thus control the optical switching behaviour via the applied SAW intensity. Direct tuning of the MMI device avoids losses and phase errors inherent to arrayed waveguide based switches, while also reducing the dimensions of the photonic circuit.
RESUMEN
We demonstrate compact tunable phased-array wavelength-division multiplexers driven by surface acoustic waves (SAWs) in the low GHz range. The devices comprise two couplers, which respectively split and combine the optical signal, linked by an array of single-mode waveguides (WGs). Two different layouts are presented, in which multi-mode interference couplers or free propagating regions were separately employed as couplers. The multiplexers operate on five equally distributed wavelength channels, with a spectral separation of 2 nm. A standing SAW modulates the refractive index of the arrayed WGs. Each wavelength component periodically switches paths between the output channel previously asigned by the design and the adjacent channels, at a fixed applied acoustic power. The devices were monolithically fabricated on (Al,Ga)As. A good agreement between theory and experiment is achieved.
RESUMEN
Photonic modulators are one of the most important elements of integrated photonics. We have designed, fabricated, and characterized a tunable photonic modulator consisting of two 180°-dephased output waveguide channels, driven by a surface acoustic wave in the GHz frequency range built on (Al,Ga)As. Odd multiples of the fundamental driven frequency are enabled by adjusting the applied acoustic power. A good agreement between theory and experimental results is achieved. The device can be used as a building block for more complex integrated functionalities and can be implemented in several material platforms.