A Doping-Induced SrCo0.4Fe0.6O3/CoFe2O4 Nanocomposite for Efficient Oxygen Evolution in Alkaline Media.

Perovskite and spinel oxides are promising alternatives to noble metal-based electrocatalysts for oxygen evolution reaction (OER). Herein, a novel perovskite/spinel nanocomposite comprised of SrCo0.4Fe0.6O3 and CoFe2O4 (SCF/CF) is prepared through a simple one-step method that incorporates iron doping into a SrCoO3- δ matrix, circumventing complex fabrication processes typical of these materials. At a Fe dopant content of 60%, the CoFe2O4 spinel phase is directly precipitated from the parent SrCo0.4Fe0.6O3 perovskite phase and the number of active B-site metals (Co/Fe) in the parent SCF can be maximized. This nanocomposite exhibits a remarkable OER activity in alkaline media with a small overpotentional of 294 mV at 10 mA cm-2. According to surface states analysis, the parent SCF perovskite remains in its pristine form under alkaline OER conditions, serving as a stable substrate, while the second spinel CF is covered by 5/8 monolayer (ML) O*, exhibiting considerable affinity toward the oxygen species involved in the OER. Analysis based on advanced OER microkinetic volcano model indicates that a 5/8 ML O* covered-CF is the origin for the remarkable activity of this nanocomposite. The results reported here significantly advance knowledge in OER and can boost application, scale-up and commercialisation of electrocatalytic technologies toward clean energy devices.

CO2 Reduction by an Iron(I) Porphyrinate System: Effect of Hydrogen Bonding on the Second Coordination Sphere.

Transforming CO2 into valuable materials is an important reaction in catalysis, especially because CO2 concentrations in the atmosphere have been growing steadily due to extensive fossil fuel usage. From an environmental perspective, reduction of CO2 to valuable materials should be catalyzed by an environmentally benign catalyst and avoid the use of heavy transition-metal ions. In this work, we present a computational study into a novel iron(I) porphyrin catalyst for CO2 reduction, namely, with a tetraphenylporphyrin ligand and analogues. In particular, we investigated iron(I) tetraphenylporphyrin with one of the meso-phenyl groups substituted with o-urea, p-urea, or o-2-amide groups. These substituents can provide hydrogen-bonding interactions in the second coordination sphere with bound ligands and assist with proton relay. Furthermore, our studies investigated bicarbonate and phenol as stabilizers and proton donors in the reaction mechanism. Potential energy landscapes for double protonation of iron(I) porphyrinate with bound CO2 are reported. The work shows that the bicarbonate bridges the urea/amide groups to the CO2 and iron center and provides a tight bonding pattern with strong hydrogen-bonding interactions that facilitates easy proton delivery and reduction of CO2. Specifically, bicarbonate provides a low-energy proton shuttle mechanism to form CO and water efficiently. Furthermore, the o-urea group locks bicarbonate and CO2 in a tight orientation and helps with ideal proton transfer, while there is more mobility and lesser stability with an o-amide group in that position instead. Our calculations show that the o-urea group leads to reduction in proton-transfer barriers, in line with experimental observation. We then applied electric-field-effect calculations to estimate the environmental effects on the two proton-transfer steps in the reaction. These calculations describe the perturbations that enhance the driving forces for the proton-transfer steps and have been used to make predictions about how the catalysts can be further engineered for more enhanced CO2 reduction processes.

Investigating the behaviour of NaCl brines and hydrocarbons in porous alumina using low-field NMR relaxation and diffusion methods.

The behaviour of multiple fluid phases within a porous medium is hard to predict. NMR measurements offer an excellent tool to probe such systems in a fast and non-invasive way. Such systems can be relevant to hydrocarbon recovery, catalysis, and CO2 and H2 geo-storage, among others. Since electrolyte solutions are always present in subsurface reservoirs, understanding their behaviour within porous media is highly important. In this study, we use NMR relaxation and diffusion methods to investigate the diffusion coefficients and strength of interactions between alumina surfaces and brines at various NaCl concentrations, focusing on the effect of salt concentration on transport and interactions within the porous structure. Furthermore, we study the spontaneous displacement of dodecane, a model hydrocarbon, from the same alumina pellets using the same brine solutions. Results show that brines of lower salinity consistently displace more dodecane in total, after soaking dodecane-saturated pellets in a brine solution for several days. This indicates that increased salt concentrations can reduce wettability towards the aqueous phase in simple metal oxide surfaces and highlights the capabilities of NMR to efficiently study such systems.

Exploring the effect of molecular size and framework functionalisation on transport in metal-organic frameworks using pulsed-field gradient nuclear magnetic resonance.

Molecular transport is an important aspect in metal-organic frameworks (MOFs) as it affects many of their applications, such as adsorption/separation, drug delivery and catalysis. Yet probing the fundamental diffusion mechanisms in MOFs is challenging, and the interplay between the MOF's features (such as the pore structure and linker dynamics) and molecular transport remains mostly unexplored. Here, the pulsed-field gradient nuclear magnetic resonance (PFG NMR) technique is used to probe the diffusion of several probe molecules, i.e., water, xylenes and 1,3,5-triisopropylbenzene (TIPB), within the UiO-66 MOF and its derivatives (UiO-66NH2 and UiO-66Br). Exploiting differences in the size of probe molecules we were able to probe the diffusion rate selectively in the different pore environments of the MOFs. In particular, when relatively small molecules, such as water and small hydrocarbons, were used as probes, the PFG NMR log attenuation plots were non-linear with two distinctive diffusion regions, suggesting faster diffusion in the inter-crystalline space and slower diffusion within crystal aggregates, the latter occurring mostly inside the framework of the MOFs. Conversely, experiments with a larger probe molecule, i.e., TIPB, with a kinetic diameter of 0.95 nm, which makes it unable to access the framework windows of the MOF crystals, showed linear PFG NMR log attenuation plots, which indicates diffusion occurring in a single environment, most likely in the inter-crystalline space. Analysis of the apparent tortuosity values of the systems under investigation highlights the role of linker functionalisation in influencing the molecular diffusion of the probe molecules, which affects both intra-molecular interactions and pore accessibility within the MOF crystals. The findings of this work demonstrate that the diffusion behaviour of probe molecules within MOFs is influenced by the pore size, structure, functionalisation of the MOF linker and molecular interactions. Our study contributes to further advance the understanding of mass transport in MOFs by PFG NMR and provides insights that can inform the design and optimisation of MOF-based materials for various applications.

Heterogeneous Organocatalysts for Light-Driven Reactions in Continuous Flow.

Within the realm of organic synthesis, photocatalysis has blossomed since the beginning of the last decade. A plethora of classical reactivities, such as selective oxidation of alcohol and amines, redox radical formation of reactive species in situ, and indirect activation of an organic substrate for cycloaddition by EnT, have been revised in a milder and more sustainable fashion via photocatalysis. However, even though the spark of creativity leads scientists to explore new reactions and reactivities, the urgency of replacing the toxic and critical metals that are involved as catalysts has encouraged chemists to find alternatives in the branch of science called organocatalysis. Unfortunately, replacing metal catalysts with organic analogues can be too expensive sometimes; however, this drawback can be solved by the reutilization of the catalyst if it is heterogeneous. The aim of this review is to present the recent works in the field of heterogeneous photocatalysis, applied to organic synthesis, enabled by continuous flow. In detail, among the heterogeneous catalysts, g-CN, polymeric photoactive materials, and supported molecular catalysts have been discussed within their specific sections, rather than focusing on the types of reactions.

Mechanism of CO2 Reduction to Methanol with H2 on an Iron(II)-scorpionate Catalyst.

CO2 utilization is an important process in the chemical industry with great environmental power. In this work we show how CO2 and H2 can be reacted to form methanol on an iron(II) center and highlight the bottlenecks for the reaction and what structural features of the catalyst are essential for efficient turnover. The calculations predict the reactions to proceed through three successive reaction cycles that start with heterolytic cleavage of H2 followed by sequential hydride and proton transfer processes. The H2 splitting process is an endergonic process and hence high pressures will be needed to overcome this step and trigger the hydrogenation reaction. Moreover, H2 cleavage into a hydride and proton requires a metal to bind hydride and a nearby source to bind the proton, such as an amide or pyrazolyl group, which the scorpionate ligand used here facilitates. As such the computations highlight the non-innocence of the ligand scaffold through proton shuttle from H2 to substrate as an important step in the reaction mechanism.

Effect of surfactant concentration on diffusion and microstructure in water-in-oil emulsions studied by low-field benchtop NMR and optical microscopy.

Emulsions are ubiquitous in many consumer products, including food, cosmetics and pharmaceuticals. Whilst their macroscopic characterisation is well-established, understanding their microscopic behaviour is very challenging. In our previous work we investigated oil-in-water emulsions by studying the effect of water on structuring and dynamics of such systems. In the present work, we investigate the effect of surfactant concentration on microstructure and diffusion within the water-in-oil emulsion system by using low-field pulsed-field gradient (PFG) NMR studies carried out with a benchtop NMR instrument, in conjunction with optical imaging. The results reveal that at high surfactant concentration the formation of smaller droplets gives rise to a third component in the PFG NMR attenuation plot, which is mostly attributed to restricted diffusion near the droplet boundaries. In addition, structuring effects due to increase in surfactant concentration at the boundaries could also contribute to further slowing down water diffusion at the boundaries. As the surfactant concentration decreases, the average droplet size becomes larger and both restriction and structuring effects at the droplet boundaries become less significant, as suggested by the PFG NMR plot, whereby the presence of a third diffusion component becomes less pronounced.

Heterogenised catalysts for the H-transfer reduction reaction of aldehydes: influence of solvent and solvation effects on reaction performances.

Heterogenisation of homogeneous catalysts onto solid supports represents a potential strategy to make the homogeneous catalytic function recyclable and reuseable. Yet, it is usually the case that immobilised catalysts have much lower catalytic activity than their homogeneous counterpart. In addition, the presence of a solid interface introduces a higher degree of complexity by modulating solid/fluid interactions, which can often influence adsorption properties of solvents and reactive species and, ultimately, catalytic activity. In this work, the influence of support and solvent in the H-transfer reduction of propionaldehyde over Al(OiPr)3-SiO2, Al(OiPr)3-TiO2 and Al(OiPr)3-Al2O3 heterogenised catalysts has been studied. Reaction studies are coupled with both NMR relaxation measurements as well as molecular dynamics (MD) simulations in order to unravel surface and solvation effects during the reaction. The results show that, whilst the choice of the support does not influence significantly catalytic activity, reactions carried out in solvents with high affinity for the catalyst surface, or able to hinder access to active sites due to solvation effects, have a lower activity. MD calculations provide key insights into bulk solvation effects involved in such reactions, which are thought to play an important role in determining the catalytic behaviour. The activity of the heterogenised catalysts was found to be comparable with that of the homogeneous Al(OiPr)3 catalysts for all supports used, showing that for the type of reaction studied immobilisation of the homogeneous catalyst onto solid supports is a viable, robust and effective strategy.

The surface states of transition metal X-ides under electrocatalytic conditions.

Due to conversion equilibrium between solvent and H- and O-containing adsorbates, the true surface state of a catalyst under a particular electrochemical condition is often overlooked in electrocatalysis research. Herein, by using surface Pourbaix analysis, we show that many electrocatalytically active transition metal X-ides (e.g., oxides, nitrides, carbides, and hydroxides) tend to possess the surface states different from their pristine stoichiometric forms under the pH and potential of interest due to water dissociation or generation. Summarizing the density functional theory calculated surface Pourbaix diagrams of 14 conditionally stable transition metal X-ide materials, we found that some of these surfaces tend to be covered by O-containing adsorbates at a moderate or high potential, while vacancies or H-covered surfaces may form at a low potential. These results suggest the possibility of poisoning or creation of surface sites beyond the pristine surface, implying that the surface state under reaction conditions (pH and potentials) needs to be considered before the identification and analysis of active sites of a transition metal X-ide catalyst. In addition, we provide an explanation of the observed theory and experiment discrepancy that some transition metal X-ides are "more stable in experiment than in theory." Based on our findings, we conclude that analyzing the surface state of transition metal X-ide electrocatalysts by theoretical calculations (e.g., surface Pourbaix diagram analysis), in situ/operando and post-reaction experiments are indispensable to accurately understand the underlying catalytic mechanisms.

Nuclear spin relaxation as a probe of zeolite acidity: a combined NMR and TPD investigation of pyridine in HZSM-5.

The relative surface affinities of pyridine within microporous HZSM-5 zeolites are explored using two-dimensional 1H nuclear magnetic resonance (NMR) relaxation time measurements. The dimensionless ratio of longitudinal-to-transverse nuclear spin relaxation times T1/T2 is shown to exhibit strong sensitivity to the silica/alumina ratio (SAR) of these zeolites, which is indicative of material acidity. This trend is interpreted in terms of increased pyridine surface affinity with decreasing SAR. Temperature programmed desorption (TPD) analysis corroborates this observation, revealing a distinct increase in the heat of desorption associated with adsorbed pyridine as a function of decreasing SAR. A direct correlation between NMR and TPD data suggests NMR relaxation time analysis can be a valuable tool for the non-invasive characterisation of adsorption phenomena in microporous solids.

23Na NMR T1 relaxation measurements as a probe for diffusion and dynamics of sodium ions in salt-glycerol mixtures.

Mixtures of sodium salts with oxygen-containing molecules are useful from the perspective of applications such as sodium ion batteries because they fill the gap between deep eutectic solvents and molten salt hydrates. In a previous work, the physical properties (such as diffusion coefficients, conductivity, viscosity, and glass transition temperature) of four salts, namely, Na2B4O7 · 10H2O, NaOAc · 3H2O, NaBr, and NaOAc, were measured with glycerol. Pulsed-field gradient (PFG) nuclear magnetic resonance (NMR) was also used to measure self-diffusion coefficients of 1H-bearing species. However, the technique was not able to measure diffusion of sodium ions due to the very fast NMR relaxation rate of such species, resulting in loss of the PFG NMR signal. In the current work, this study is expanded using 23Na T1 relaxation measurements which, under certain assumptions, can be translated into diffusion coefficients. Analysis of the physical properties is then correlated with self-diffusion coefficient measurements to elucidate information about structure and ionic mobility. It is shown that NaOAc · 3H2O, NaBr, and NaOAc fit models for ionic conductivity and diffusion, which are consistent with ionic liquids where charge transport is limited by ionic mobility rather than the number of charge carriers. The waters of hydration of NaOAc · 3H2O do not appear to form a separate phase but are instead strongly coordinated to the cation. In contrast, Na2B4O7 · 10H2O appears to form a water-rich phase with enhanced sodium mobility.

Solvent Effects in the Homogeneous Catalytic Reduction of Propionaldehyde with Aluminium Isopropoxide Catalyst: New Insights from PFG NMR and NMR Relaxation Studies.

Solvent effects in homogeneous catalysis are known to affect catalytic activity. Whilst these effects are often described using qualitative features, such as Kamlet-Taft parameters, experimental tools able to quantify and reveal in more depth such effects have remained unexplored. In this work, PFG NMR diffusion and T1 relaxation measurements have been carried out to probe solvent effects in the homogeneous catalytic reduction of propionaldehyde to 1-propanol in the presence of aluminium isopropoxide catalyst. Using data on diffusion coefficients it was possible to estimate trends in aggregation of different solvents. The results show that solvents with a high hydrogen-bond accepting ability, such as ethers, tend to form larger aggregates, which slow down the molecular dynamics of aldehyde molecules, as also suggested by T1 measurements, and preventing their access to the catalytic sites, which results in the observed decrease of catalytic activity. Conversely, weakly interacting solvents, such as alkanes, do not lead to the formation of such aggregates, hence allowing easy access of the aldehyde molecules to the catalytic sites, resulting in higher catalytic activity. The work reported here is a clear example on how combining traditional catalyst screening in homogeneous catalysis with NMR diffusion and relaxation time measurements can lead to new physico-chemical insights into such systems by providing data able to quantify aggregation phenomena and molecular dynamics.

Creation of Al-Enriched Mesoporous ZSM-5 Nanoboxes with High Catalytic Activity: Converting Tetrahedral Extra-Framework Al into Framework Sites by Post Treatment.

ZSM-5 zeolite nanoboxes with accessible meso-micro-pore architecture and strong acid sites are important in relevant heterogeneous catalysis suffering from mass transfer limitations and weak acidities. Rational design of parent zeolites with concentrated and non-protective coordination of Al species can facilitate post-synthetic treatment to produce mesoporous ZSM-5 nanoboxes. In this work, a simple and effective method was developed to convert parent MFI zeolites with tetrahedral extra-framework Al into Al-enriched mesoporous ZSM-5 nanoboxes with low silicon-to-aluminium ratios of ≈16. The parent MFI zeolite was prepared by rapid ageing of the zeolite sol gel synthesis mixture. The accessibility to the meso-micro-porous intra-crystalline network was probed systematically by comparative pulsed field gradient nuclear magnetic resonance diffusion measurements, which, together with the strong acidity of nanoboxes, provided superb catalytic activity and longevity in hydrocarbon cracking for propylene production.

Correction: Maxwell-Stefan diffusion coefficient estimation for ternary systems: an ideal ternary alcohol system.

Correction for 'Maxwell-Stefan diffusion coefficient estimation for ternary systems: an ideal ternary alcohol system' by Tariq Allie-Ebrahim et al., Phys. Chem. Chem. Phys., 2017, 19, 16071-16077.

Globular and Fibrous Proteins Modified with Deep Eutectic Solvents: Materials for Drug Delivery.

Proteinaceous materials have numerous structures, many of which aid in the roles they perform. Some need to impart strength while others need elasticity or toughness. This study is the first to investigate the modification of both globular and fibrous protein, namely, zein, soy protein and gelatin, using deep eutectic solvents (DES) to form bioplastics, which may have application in drug delivery systems. The effects of DES content on the thermal and mechanical properties of the material were determined. Zein and soy are globular proteins, which both showed a significant change in the properties by the addition of DES. Both of these materials were, however, weaker and less ductile than the starch based materials previously reported in the literature. The material made from gelatin, a fibrous protein, showed variable properties depending on how long they were in contact with each other before pressing. Conductivity and NMR measurements indicate the existence of a continuous liquid phase, which are useful in the demonstrated application of transdermal drug delivery systems. It is shown that pharmaceutical DESs can be gelled with gelatin and this method is three times faster at delivering a pharmaceutical active ingredient across the skin barrier than from a corresponding solid formulation.

HfN Nanoparticles: An Unexplored Catalyst for the Electrocatalytic Oxygen Evolution Reaction.

Water electrolysis is one of the most promising methods to produce H2 and O2 as high potential fuels. Comparing the two half-reactions, the oxygen evolution reaction (OER) is the more difficult to be optimized and still relies on expensive noble metal-based catalysts such as Ru or Ir. In this paper, we prepared nanoparticles of HfN and Hf2 ON2 and tested them for the OER for the first time. The HfN sample, in particular, showed the highest activity, requiring an overpotential of only 358 mV at 10 mA cm-2 in Fe-free electrolyte and, above all, exhibiting long-term stability. This result places this system amongst one of the most promising catalysts for OER tested to date, in terms of sustainability, activity and stability. The prepared nanoparticles are small (less than 15 nm in diameter), well-defined in shape and crystalline, and were characterised before and after electrochemical testing also via electron microscopy (EM), powder X-ray diffraction (PXRD) and X-ray photoelectron spectroscopy (XPS).

Direct Correlation between Adsorption Energetics and Nuclear Spin Relaxation in a Liquid-saturated Catalyst Material.

The ratio of NMR relaxation time constants T 1 / T 2 provides a non-destructive indication of the relative surface affinities exhibited by adsorbates within liquid-saturated mesoporous catalysts. In the present work we provide supporting evidence for the existence of a quantitative relationship between such measurements and adsorption energetics. As a prototypical example with relevance to green chemical processes we examine and contrast the relaxation characteristics of primary alcohols and cyclohexane within an industrial silica catalyst support. T 1 / T 2 values obtained at intermediate magnetic field strength are in good agreement with DFT adsorption energy calculations performed on single molecules interacting with an idealised silica surface. Our results demonstrate the remarkable ability of this metric to quantify surface affinities within systems of relevance to liquid-phase heterogeneous catalysis, and highlight NMR relaxation as a powerful method for the determination of adsorption phenomena within mesoporous solids.

Diffusion, Ion Pairing and Aggregation in 1-Ethyl-3-Methylimidazolium-Based Ionic Liquids Studied by 1 H and 19 F PFG NMR: Effect of Temperature, Anion and Glucose Dissolution.

In this work, using 1 H and 19 F PFG NMR, we probe the effect of temperature, ion size/type and glucose dissolution on the rate of transport in 1-ethyl-3-methylimidazolium ([EMIM]+ )-based ionic liquids by measuring self-diffusion coefficients. Using such data, we are able to establish the degree of ion pairing and quantify the extent of ionic aggregation during diffusion. For the neat 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]) a strong degree of ion pairing is observed. The substitution of the [OAc]- anion with the bis{(trifluoromethyl)sulfonyl}imide ([TFSI]- ) anion reduces the pairing between the ions, which is attributed to a lower electric charge density on the [TFSI]- anion, hence a weaker electric interaction with the [EMIM]+ cation. The effect of glucose, important for applications of ionic liquids as extracting media, on the strongly paired [EMIM][OAc] sample was also investigated and it is observed that the carbohydrate decreases the degree of ion pairing, which is attributed to the ability of glucose to disrupt inter-ionic interactions by forming hydrogen bonding, particularly with the [OAc]- anion. Calculations of aggregation number from diffusion data show that the [OAc]- anion diffuses as a part of larger aggregates compared to the [EMIM]+ cation. The results and analysis presented here show the usefulness of PFG NMR in studies of ionic liquids, giving new insights into ion pairing and aggregation and the factors affecting these parameters.

Base adsorption mechanism over zeolite catalysts at different Al contents probed by the tapered element oscillating microbalance (TEOM).

Acidity of zeolites is a paramount property that determines their behaviour in catalytic and adsorption applications. Various techniques have been established over the years to characterise this property qualitatively and quantitatively, using different indicators able to reveal different insights. In this work, for the first time we have used the tapered element oscillating microbalance (TEOM) to study the quantitative aspects of the internal and external acidity of zeolites by measuring the sorption dynamics of pyridine and collidine over HZSM5 zeolites with different silica-to-alumina ratios (SAR). The method is able to easily quantify, with a rapid and robust calibration procedure, maximum, physisorbed and chemisorbed uptake of probe molecules. The results show that the uptake of both pyridine and collidine measured by the TEOM increases with decreasing SAR, that is, with the increase in Al content, consistent with the increase in acid site density at increasing Al content. Most importantly, by providing a robust and easy-to-interpret set of data, the experimental protocol reveals new fundamental insights into the adsorption mechanism as a function of the Al content, showing that at high Al content chemisorption is the major adsorption mechanism, whereas at low Al content physisorption becomes the dominant mechanism.

Effect of Al content on the strength of terminal silanol species in ZSM-5 zeolite catalysts: a quantitative DRIFTS study without the use of molar extinction coefficients.

The strength of terminal hydroxyl Si-OH groups (silanols) in zeolites is important for many non-size-selective catalytic reactions occurring onto the external surface of the zeolite crystals and may often be responsible for catalyst deactivation, e.g., coke formation. A quantitative analysis of Si-OH strength and its link with the Al content, hence varying silica-to-alumina ratio (SAR = SiO2/Al2O3), has not been established yet. Various hypotheses have been proposed in the literature; nonetheless, the role of Al content in determining silanol strength remains still unclear and the object of speculation. In this work, we have systematically investigated the effect of the Al content on the strength of terminal silanol sites in ZSM-5 zeolite catalysts with varying SAR using Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) at variable temperatures without molar extinction coefficients. Two base probe molecules with different proton affinity values, pyridine and collidine, were used. To quantify the strength of terminal silanol sites the change of the terminal silanol peak in the OH stretching region, together with data on elemental analysis, was used. With this experimental protocol, unlike most IR studies, the use of molar extinction coefficients, often difficult to obtain, is not needed for quantification. The results reported here show for the first time that for ZSM-5 zeolite catalysts the fraction of occupied terminal silanol acid sites for both pyridine and collidine increases with increasing concentration of external Brønsted acid sites, hence establishing a clear link between the two types of acid sites. In summary, this work shows that the use of DRIFTS without molar extinction coefficients is able to quantitatively probe the strength of terminal silanol acid sites and establishes a link between the external Brønsted Al content and the strength of terminal silanol species in ZSM-5 zeolites with varying SAR at elevated temperatures.