Profiling alveolar macrophage responses to inhaled compounds using in vitro high content image analysis.

One of the main hurdles in the development of new inhaled medicines is the frequent observation of foamy macrophage (FM) responses in non-clinical studies in experimental animals, which raises safety concerns and hinders progress into clinical trials. We have investigated the potential of a novel multi-parameter high content image analysis (HCIA) assay as an in vitro safety screening tool to predict drug induced FM. Rat (NR8383) and human U937-derived alveolar macrophages were exposed in vitro to a panel of model compounds with different biological activity, including inhaled bronchodilators, inhaled corticosteroids (ICS), phospholipidosis inducers and proapoptotic agents. An HCIA was utilized to produce drug-induced cell response profiles based on individual cell health, morphology and lipid content parameters. The profiles of both rat and human macrophage cell lines differentiated between cell responses to marketed inhaled drugs and compounds known to induce phospholipidosis and apoptosis. Hierarchical clustering of the aggregated data allowed identification of distinct cell profiles in response to exposure to phospholipidosis and apoptosis inducers. Additionally, in NR8383 cell responses formed two distinct clusters, associated with increased vacuolation with or without lipid accumulation. U937 cells presented a similar trend but appeared less sensitive to drug exposure and presented a narrower range of responses. These results indicate that our multi-parameter HCIA assay is suitable to generate characteristic drug-induced macrophage response profiles, thus enabling differentiation of foamy macrophage phenotypes associated with phospholipidosis and apoptosis. This approach shows great potential as pre-clinical in vitro screening tool for safety assessment of candidate inhaled medicines.

Synchrotron Photothermal Infrared Nanospectroscopy of Drug-Induced Phospholipidosis in Macrophages.

Synchrotron resonance-enhanced infrared atomic force microscopy (RE-AFM-IR) is a near-field photothermal vibrational nanoprobe developed at Diamond Light Source (DLS), capable of measuring mid-infrared absorption spectra with spatial resolution around 100 nm. The present study reports a first application of synchrotron RE-AFM-IR to interrogate biological soft matter at the subcellular level, in this case, on a cellular model of drug-induced phospholipidosis (DIPL). J774A-1 macrophages were exposed to amiodarone (10 µM) or medium for 24 h and chemically fixed. AFM topography maps revealed amiodarone-treated cells with enlarged cytoplasm and very thin regions corresponding to collapsed vesicles. IR maps of the whole cell were analyzed by exploiting the RE-AFM-IR overall signal, i.e., the integrated RE-AFM-IR signal amplitude versus AFM-derived cell thickness, also on lateral resolution around 100 nm. Results show that vibrational band assignment was possible, and all characteristic peaks for lipids, proteins, and DNA/RNA were identified. Both peak ratio and unsupervised chemometric analysis of RE-AFM-IR nanospectra generated from the nuclear and perinuclear regions of untreated and amiodarone-treated cells showed that the perinuclear region (i.e., cytoplasm) of amiodarone-treated cells had significantly elevated band intensities in the regions corresponding to phosphate and carbonyl groups, indicating detection of phospholipid-rich inclusion bodies typical for cells with DIPL. The results of this study are of importance to demonstrate not only the applicability of Synchrotron RE-AFM-IR to soft biological matters with subcellular spatial resolution but also that the spectral information gathered from an individual submicron sample volume enables chemometric identification of treatment and biochemical differences between mammalian cells.

Imaging drugs, metabolites and biomarkers in rodent lung: a DESI MS strategy for the evaluation of drug-induced lipidosis.

Within drug development and pre-clinical trials, a common, significant and poorly understood event is the development of drug-induced lipidosis in tissues and cells. In this manuscript, we describe a mass spectrometry imaging strategy, involving repeated analysis of tissue sections by DESI MS, in positive and negative polarities, using MS and MS/MS modes. We present results of the detected distributions of the administered drug, drug metabolites, lipid molecules and a putative marker of lipidosis, di-docosahexaenoyl (22:6)-bis(monoacylglycerol) phosphate (di-22:6-BMP). A range of strategies have previously been reported for detection, isolation and identification of this compound, which is an isomer of di-docosahexaenoic (22:6 n-3) phosphatidylglycerol (di-22:6 PG), a commonly found lipid that acts as a surfactant in lung tissues. We show that MS imaging using MS/MS can be used to differentiate these compounds of identical mass, based upon the different distributions of abundant fragment ions. Registration of images of these fragments, and detected drugs and metabolites, is presented as a new method for studying drug-induced lipidosis in tissues. Graphical abstract.

Influence of the Surfactant Structure on Photoluminescent π-Conjugated Polymer Nanoparticles: Interfacial Properties and Protein Binding.

π-Conjugated polymer nanoparticles (CPNs) are under investigation as photoluminescent agents for diagnostics and bioimaging. To determine whether the choice of surfactant can improve CPN properties and prevent protein adsorption, five nonionic polyethylene glycol alkyl ether surfactants were used to produce CPNs from three representative π-conjugated polymers. The surfactant structure did not influence size or yield, which was dependent on the nature of the conjugated polymer. Hydrophobic interaction chromatography, contact angle, quartz crystal microbalance, and neutron reflectivity studies were used to assess the affinity of the surfactant to the conjugated polymer surface and indicated that all surfactants were displaced by the addition of a model serum protein. In summary, CPN preparation methods which rely on surface coating of a conjugated polymer core with amphiphilic surfactants may produce systems with good yields and colloidal stability in vitro, but may be susceptible to significant surface alterations in physiological fluids.

Morphometric Characterization of Rat and Human Alveolar Macrophage Cell Models and their Response to Amiodarone using High Content Image Analysis.

PURPOSE: Progress to the clinic may be delayed or prevented when vacuolated or "foamy" alveolar macrophages are observed during non-clinical inhalation toxicology assessment. The first step in developing methods to study this response in vitro is to characterize macrophage cell lines and their response to drug exposures. METHODS: Human (U937) and rat (NR8383) cell lines and primary rat alveolar macrophages obtained by bronchoalveolar lavage were characterized using high content fluorescence imaging analysis quantification of cell viability, morphometry, and phospholipid and neutral lipid accumulation. RESULTS: Cell health, morphology and lipid content were comparable (p < 0.05) for both cell lines and the primary macrophages in terms of vacuole number, size and lipid content. Responses to amiodarone, a known inducer of phospholipidosis, required analysis of shifts in cell population profiles (the proportion of cells with elevated vacuolation or lipid content) rather than average population data which was insensitive to the changes observed. CONCLUSIONS: A high content image analysis assay was developed and used to provide detailed morphological characterization of rat and human alveolar-like macrophages and their response to a phospholipidosis-inducing agent. This provides a basis for development of assays to predict or understand macrophage vacuolation following inhaled drug exposure.

Differences in the coronal proteome acquired by particles depositing in the lungs of asthmatic versus healthy humans.

Most inhaled nanomedicines in development are for the treatment of lung disease, yet little is known about their interaction with the respiratory tract lining fluids (RTLFs). Here we combined the use of nano-silica, as a protein concentrator, with label-free snapshot proteomics (LC-MS/MS; key findings confirmed by ELISA) to generate a quantitative profile of the RTLF proteome and provided insight into the evolved corona; information that may be used in future to improve drug targeting to the lungs by inhaled medicines. The asthmatic coronal proteome displayed a reduced contribution of surfactant proteins (SP-A and B) and a higher contribution of α1-antitrypsin. Pathway analysis suggested that asthmatic RTLFs may also be deficient in proteins related to metal handling (e.g. lactoferrin). This study demonstrates how the composition of the corona acquired by inhaled nanoparticles is modified in asthma and suggests depressed mucosal immunity even in mild airway disease.

In vivo pharmacological activity and biodistribution of S-nitrosophytochelatins after intravenous and intranasal administration in mice.

S-nitrosophytochelatins (SNOPCs) are novel analogues of S-nitrosoglutathione (GSNO) with the advantage of carrying varying ratios of S-nitrosothiol (SNO) moieties per molecule. Our aim was to investigate the in vivo pharmacological potency and biodistribution of these new GSNO analogues after intravenous (i.v.) and intranasal (i.n.) administration in mice. SNOPCs with either two or six SNO groups and GSNO were synthesized and characterized for purity. Compounds were administered i.v. or i.n. at 1 µmol NO/kg body weight to CD-1 mice. Blood pressure was measured and biodistribution studies of total nitrate and nitrite species (NOx) and phytochelatins were performed after i.v. administration. At equivalent doses of NO, it was observed that SNOPC-6 generated a rapid and significantly greater reduction in blood pressure (∼60% reduction compared to saline) whereas GSNO and SNOPC-2 only achieved a 30-35% decrease. The reduction in blood pressure was transient and recovered to baseline levels within ∼2 min for all compounds. NOx species were transiently elevated (over 5 min) in the plasma, lung, heart and liver. Interestingly, a size-dependent phytochelatin accumulation was observed in several tissues including the heart, lungs, kidney, brain and liver. Biodistribution profiles of NOx were also obtained after i.n. administration, showing significant lung retention of NOx over 15 min with minor systemic increases observed from 5 to 15 min. In summary, this study has revealed interesting in vivo pharmacological properties of SNOPCs, with regard to their dramatic hypotensive effects and differing biodistribution patterns following two different routes of administration.

Enrichment of immunoregulatory proteins in the biomolecular corona of nanoparticles within human respiratory tract lining fluid.

When inhaled nanoparticles deposit in the lungs, they transit through respiratory tract lining fluid (RTLF) acquiring a biomolecular corona reflecting the interaction of the RTLF with the nanomaterial surface. Label-free snapshot proteomics was used to generate semi-quantitative profiles of corona proteins formed around silica (SiO2) and poly(vinyl) acetate (PVAc) nanoparticles in RTLF, the latter employed as an archetype drug delivery vehicle. The evolved PVAc corona was significantly enriched compared to that observed on SiO2 nanoparticles (698 vs. 429 proteins identified); however both coronas contained a substantial contribution from innate immunity proteins, including surfactant protein A, napsin A and complement (C1q and C3) proteins. Functional protein classification supports the hypothesis that corona formation in RTLF constitutes opsonisation, preparing particles for phagocytosis and clearance from the lungs. These data highlight how an understanding of the evolved corona is necessary for the design of inhaled nanomedicines with acceptable safety and tailored clearance profiles. FROM THE CLINICAL EDITOR: Inhaled nanoparticles often acquire a layer of protein corona while they go through the respiratory tract. Here, the authors investigated the identity of these proteins. The proper identification would improve the understanding of the use of inhaled nanoparticles in future therapeutics.

In Vitro Multiparameter Assay Development Strategy toward Differentiating Macrophage Responses to Inhaled Medicines.

Although foamy macrophages (FMΦ) are commonly observed during nonclinical development of medicines for inhalation, there are no accepted criteria to differentiate adaptive from adverse FMΦ responses in drug safety studies. The purpose of this study was to develop a multiparameter in vitro assay strategy to differentiate and characterize different mechanisms of drug-induced FMΦ. Amiodarone, staurosporine, and poly(vinyl acetate) nanoparticles were used to induce distinct FMΦ phenotypes in J774A.1 cells, which were then compared with negative controls. Treated macrophages were evaluated for morphometry, lipid accumulation, gene expression, apoptosis, cell activation, and phagocytosis. Analysis of vacuolization (number/area vacuoles per cell) and phospholipid content revealed inducer-dependent distinctive patterns, which were confirmed by electron microscopy. In contrast to the other inducers, amiodarone increased vacuole size rather than number and resulted in phospholipid accumulation. No pronounced dysregulation of transcriptional activity or apoptosis was observed in response to sublethal concentrations of all inducers. Functionally, FMΦ induction did not affect macrophage activation by lipopolysaccharide, but it reduced phagocytic capacity, with different patterns of induction, severity, and resolution observed with the different inducers. An in vitro multiparameter assay strategy is reported that successfully differentiates and characterizes mechanisms leading to FMΦ induction by different types of agents.

Surface chemistry of photoluminescent F8BT conjugated polymer nanoparticles determines protein corona formation and internalization by phagocytic cells.

Conjugated polymer nanoparticles are being developed for a variety of diagnostic and theranostic applications. The conjugated polymer, F8BT, a polyfluorene derivative, was used as a model system to examine the biological behavior of conjugated polymer nanoparticle formulations stabilized with ionic (sodium dodecyl sulfate; F8BT-SDS; ∼207 nm; -31 mV) and nonionic (pegylated 12-hydroxystearate; F8BT-PEG; ∼175 nm; -5 mV) surfactants, and compared with polystyrene nanoparticles of a similar size (PS200; ∼217 nm; -40 mV). F8BT nanoparticles were as hydrophobic as PS200 (hydrophobic interaction chromatography index value: 0.96) and showed evidence of protein corona formation after incubation with serum-containing medium; however, unlike polystyrene, F8BT nanoparticles did not enrich specific proteins onto the nanoparticle surface. J774A.1 macrophage cells internalized approximately ∼20% and ∼60% of the F8BT-SDS and PS200 delivered dose (calculated by the ISDD model) in serum-supplemented and serum-free conditions, respectively, while cell association of F8BT-PEG was minimal (<5% of the delivered dose). F8BT-PEG, however, was more cytotoxic (IC50 4.5 µg cm(-2)) than F8BT-SDS or PS200. The study results highlight that F8BT surface chemistry influences the composition of the protein corona, while the properties of the conjugated polymer nanoparticle surfactant stabilizer used determine particle internalization and biocompatibility profile.

Using the High-Entropy Approach to Obtain Multimetal Oxide Nanozymes: Library Synthesis, In Silico Structure-Activity, and Immunoassay Performance.

High-entropy nanomaterials exhibit exceptional mechanical, physical, and chemical properties, finding applications in many industries. Peroxidases are metalloenzymes that accelerate the decomposition of hydrogen peroxide. This study uses the high-entropy approach to generate multimetal oxide-based nanozymes with peroxidase-like activity and explores their application as sensors in ex vivo bioassays. A library of 81 materials was produced using a coprecipitation method for rapid synthesis of up to 100 variants in a single plate. The A and B sites of the magnetite structure, (AA')(BB'B'')2O4, were substituted with up to six different cations (Cu/Fe/Zn/Mg/Mn/Cr). Increasing the compositional complexity improved the catalytic performance; however, substitutions of single elements also caused drastic reductions in the peroxidase-like activity. A generalized linear model was developed describing the relationship between material composition and catalytic activity. Binary interactions between elements that acted synergistically or antagonistically were identified, and a single parameter, the mean interaction effect, was observed to correlate highly with catalytic activity, providing a valuable tool for the design of high-entropy-inspired nanozymes.

Amorphous Drug Nanoparticles for Inhalation Therapy of Multidrug-Resistant Tuberculosis.

Tuberculosis (TB) is one of the most prevalent infectious diseases. The global TB situation is further complicated by increasing patient numbers infected with Mycobacterium tuberculosis (M.tb.) strains resistant to either one or two of the first-line therapeutics, promoted by insufficient treatment length and/or drug levels due to adverse reactions and reduced patient compliance. An intriguing approach to improve anti-TB therapy relates to nanocarrier-based drug-delivery systems, which enhance local drug concentrations at infection sites without systemic toxicity. Recently developed anti-TB antibiotics, however, are lipophilic and difficult to transport in aqueous systems. Here, the very lipophilic TB-antibiotics bedaquiline (BDQ) and BTZ (1,3-benzothiazin-4-one 043) are prepared as high-dose, amorphous nanoparticles via a solvent-antisolvent technique. The nanoparticles exhibit mean diameters of 60 ± 13 nm (BDQ) and 62 ± 44 nm (BTZ) and have an extraordinarily high drug load with 69% BDQ and >99% BTZ of total nanoparticle mass plus a certain amount of surfactant (31% for BDQ, <1% for BTZ) to make the lipophilic drugs water-dispersible. Suspensions with high drug load (4.1 mg/mL BDQ, 4.2 mg/mL BTZ) are stable for several weeks. In vitro and in vivo studies employing M.tb.-infected macrophages and susceptible C3HeB/FeJ mice show promising activity, which outperforms conventional BDQ/BTZ solutions (in DMF or DMSO) with an up to 50% higher efficacy upon pulmonary delivery. In vitro, the BDQ/BTZ nanoparticles demonstrate their ability to cross the different biological barriers and to reach the site of the intracellular mycobacteria. In vivo, high amounts of the BDQ/BTZ nanoparticles are found in the lung and specifically inside granulomas, whereas only low BDQ/BTZ-nanoparticle levels are observed in spleen or liver. Thus, pulmonary delivered BDQ/BTZ nanoparticles are promising formulations to improve antituberculosis treatment.

Small polystyrene microplastics interfere with the breakdown of milk proteins during static in vitro simulated human gastric digestion.

Human ingestion of microplastics (MPs) is common and inevitable due to the widespread contamination of food items, but implications on the gastric digestion of food proteins are still unknown. In this study, the interactions between pepsin and polystyrene (PS) MPs were evaluated by investigating enzyme activity and conformation in a simulated human gastric environment in the presence or absence of PS MPs. The impact on food digestion was also assessed by monitoring the kinetics of protein hydrolysis through static in vitro gastric digestion of cow's milk contaminated with PS. The binding of pepsin to PS showed that the surface chemistry of MPs dictates binding affinity. The key contributor to pepsin adsorption seems to be π-π interactions between the aromatic residues and the PS phenyl rings. During quick exposure (10 min) of pepsin to increasing concentrations (222, 2219, 22188 particles/mL) of 10 µm PS (PS10) and 100 µm PS (PS100), total enzymatic activities were not affected remarkably. However, upon prolonged exposure at 1 and 2 h, preferential binding of pepsin to the small, low zeta-potential PS caused structural changes in the protein which led to a significant reduction of its activity. Digestion of cow's milk mixed with PS10 resulted in transient accumulation of larger peptides (10-35 kDa) and reduced bioavailability of short peptides (2-9 kDa) in the gastric phase. This, however, was only observed at extremely high PS10 concentration (0.3 mg/mL or 5.46E+05 particles/mL). The digestion of milk peptides, bound preferentially over pepsin within the hard corona on the PS10 surface, was delayed up to 15 min in comparison to bulk protein digestion. Intact caseins, otherwise rapidly digested, remained bound to PS10 in the hard corona for up to 15 min. This work presents valuable insights regarding the interaction of MPs, food proteins, and pepsin, and their dynamics during gastric digestion.

Comparative profiling and exposure assessment of microplastics in differently sized Manila clams from South Korea by µFTIR and Nile Red staining.

The accumulation of microplastics in marine organisms is an emerging concern. Due to trophic transfer, the safety of seafood is under investigation in view of the potential negative effects of microplastics on human health. In this study, market samples of Manila clams (Ruditapes philippinarum) from South Korea were segregated into two groups of considerably different size (p < 0.05), namely small clams with shell length of 40.69 ± 3.97 mm, and large clams of shell length 51.19 ± 2.86 mm. Comparative profiling of the number, size, shape, and polymer type of microplastics were performed using µFTIR imaging and Nile red staining. Overall, µFTIR detected only 1559 microplastics while 1996 microplastics were counted based on staining from 61 Manila clams (30 small and 31 large), leading to an overestimation of 18 to 75 %. Comparable microplastics concentration, based on µFTIR, were observed at 2.70 ± 1.66 MP/g or 15.64 ± 9.25 MP/individual for the small samples, and 3.65 ± 1.59 MP/g or 41.63 ± 16.90 MP/individual for the large ones (p > 0.05). Particle diameters of 20-100 µm was the most dominant, accounting for 44.6 % and 46.5 % of all microplastics from the small and large groups, respectively. Particles, with a circularity (resemblance to a circle) value between 0.6 and 1.0, were the most prevalent, followed by fragments and fibers. At least 50 % of microplastics from the small and large samples were polystyrene, making it the most abundant polymer type. Despite the substantial difference in the size of the animals, only a weak to moderate correlation was observed between microplastics content and the physical attributes of the clams such as shell length and weight, (soft) tissue weight, and total weight (Spearman's coefficient < 0.5). The estimated intake of microplastics by the Korean population was 1232 MP/person/year via small clams, 1663 MP/person/year via large clams, and 1489 MP/person/year via clams independent of size.

Investigating bolalipids as solubilizing agents for poorly soluble drugs: Effects of alkyl chain length on solubilization and cytotoxicity.

Synthetic single-chain bolalipids with symmetrical headgroups have shown potential in various pharmaceutical applications, such as the stabilization of liposome bilayers. Despite their amphiphilic character, synthetic bolalipids have not yet been investigated for their suitability as solubilizing agents for poorly soluble drug compounds. In this study, three synthetic single-chain bolalipids with increasing alkyl chain lengths (C22, C24 and C26) were investigated. All three bolalipids were able to achieve an increased solubility of the model drug, mefenamic acid, by approximately 180% in a pH 7.4 buffer compared to only a 102-105% increase achieved by sodium dodecyl sulfate (SDS) or the non-ionic surfactant pegylated hydroxystearate (PEG-HS). Subsequently, interfacial activity of bolalipids and their ability to destabilize liposomal bilayers were investigated. The C22 bolalipid exhibited a consistently lower interfacial activity, which was consistent with its significantly lower cytotoxicity in the macrophage-like cell line, J774. A1, compared to C24 and C26 counterparts. The mean IC50 values of the bolalipids tested (0.035-0.093 mM) were approximately 4-100-fold lower than that of SDS (0.401 mM) or PEG-HS (0.922 mM), with the mechanism of toxicity linked to increased cell membrane permeability, as is expected for surfactants. In summary, evidence from this study shows that decreasing the length of the bolalipid alkyl linker from C26 to C22 resulted in a significantly decreased cytotoxicity with no loss in drug solubilization efficiency.

Biocompatible Magnetic Conjugated Polymer Nanoparticles for Optical and Lifetime Imaging Applications in the First Biological Window.

Conjugated polymers are organic semiconductors that can be used for fluorescence microscopy of living specimens. Here, we report the encapsulation of the bright-red-emitting conjugated polymer, poly[{9,9-dihexyl-2,7-bis(1-cyanovinylene)fluorenylene}-alt-co-{2,5-bis(N,N'-diphenylamino)-1,4-phenylene}] (CN-FO-DPD), and superparamagnetic iron oxide nanoparticles (SPIONs) within poly(styrene-co-maleic anhydride) (PSMA) micelles. The resulting particles exhibited an emission peak at 657 nm, a fluorescence quantum yield of 21%, an average diameter of 65 nm, and a ζ potential of -30 mV. They are taken up by cells, and we describe their use in fluorescence microscopy of living Hela cells and zebrafish embryos and their associated cytotoxicity in HEK, HeLa, and HCE cells.

S-nitrosophytochelatins: investigation of the bioactivity of an oligopeptide nitric oxide delivery system.

This study investigates the in vitro bioactivity of S-nitrosophytochelatins (SNOPCs), oligopeptide analogues of S-nitrosoglutathione (GSNO), and their mechanisms of nitric oxide (NO) delivery. SNOPCs were more potent than GSNO in inhibiting platelet aggregation and stimulating vasorelaxation. Their potency was related to the number of S-nitrosated moieties per mole compound. Transnitrosation reactions with cell membrane surface components were shown to be the primary mode of NO delivery to intracellular targets for SNOPCs, while delivery via γ-glutamyl transpeptidase was unique to GSNO. Due to rapid NO release, larger SNOPCs elicited a more transitory effect compared to smaller compounds. The duration of effect was influenced by compound molecular weight, NO release kinetics, ability to undergo transnitrosation, and incubation time with tissues. In summary, a new oligopeptide NO delivery system based on SNOPCs was shown to be biologically active and can be used to investigate the mechanisms of NO delivery to intracellular targets.

Supported polymer/lipid hybrid bilayers formation resembles a lipid-like dynamic by reducing the molecular weight of the polymer.

Amphiphilic block copolymers form self-assembled bilayers even in combination with phospholipids. They represent an attractive alternative to native lipid-based membrane systems for supported bilayer formation with applications in biomedical research, sensoring and drug delivery. Their enhanced stability and excellent mechanical properties are linked to their higher molecular weight which generates thicker bilayers. Hypothesis: It is hypothesized that reducing the molecular weight of the polymer facilitates the formation of a thinner, more homogeneous polymer/lipid hybrid bilayer which would benefit the formation of supported bilayers on silicon oxide. Experiment: We investigated hybrid bilayers composed of mixtures of 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine and increasing amounts of a low molecular weight polybutadiene-b-polyethylene oxide copolymer (1050 g/mol). By assessing the bilayer thickness and the molecular packing behavior we sought to demonstrate how reducing the polymer molecular weight increases the tendency to form supported hybrid bilayers in a lipid-like manner. Findings: The formation of a supported hybrid bilayers occurs at polymer contents <70 mol% in a lipid-like fashion and is proportional to the cohesive forces between the bilayer components and inversely related to the bilayer hydrophobic core thickness and the extended brush regime of the PEGylated polymeric headgroup.

Investigating conjugated polymer nanoparticle formulations for lateral flow immunoassays.

Lateral flow immunoassays (LFI) are valuable tools for point-of-care testing. However, their sensitivity is limited and can be further improved. Nanoparticles (NP) of conjugated polymers (CPNs), also known as Pdots, are reported to be highly sensitive fluorescent probes, but a direct comparison with conventional colloidal gold-based (Au-NP) LFI using the same antibody-antigen pair is missing to date. Furthermore, the influence of brightness and Stokes shift of CPs on the signal : background ratio (SBR) needs to be evaluated. In this study, we encapsulated two different CPs, poly-(9,9-di-n-octyl-fluorenyl-2,7-diyl) (PDOF) and poly-(2,5-di-hexyloxy-cyanoterephthalylidene) (CN-PPV) in silica shell-crosslinked Pluronic© micelles (Si-NP) and Pdots and investigated the NP brightness with respect to CP loading dose. The brightest formulation of each NP system was conjugated to rabbit IgG as a model antigen and the SBR was investigated in an ELISA-like microplate assay and LFI. Two reference particles, Au-NP and a polystyrene NP (PS-NP) loaded with a small-molecule fluorescent dye were conjugated to IgG and compared to the Si-NP and Pdots. The mass of Pdots required for detection in LFI was at least two orders of magnitude lower than that of Si-NP and the reference NP. The SBR of CN-PPV (moderate brightness, large Stokes shift) was two to three times higher than the SBR of PDOF (high brightness, small Stokes shift). To combine the favourable properties of both CPs, a polymer blend of PDOF and CN-PPV was encapsulated in Pdots, and resulted in further increase of SBR in the microplate assay and LFI. In summary, combining two CPs with different properties can lead to fluorescent signal-transducers for applications such as ELISA and LFIs, which can enhance the detection limit of the assay by 2-3 orders of magnitude.

Cytocompatibility and cellular interactions of chondroitin sulfate microparticles designed for inhaled tuberculosis treatment.

Tuberculosis remains a leading cause of death, therapeutic failure being mainly due to non-compliance with prolonged treatments, often associated with severe side-effects. New therapeutic strategies are demanded and, considering that the lung is the primary site of infection, direct lung delivery of antibiotics is possibly an effective approach. Therapeutic success in this context depends on suitable carriers that reach the alveoli where Mycobacterium hosts (macrophages) reside, as well as on their ability to promote macrophage capture and intracellular accumulation of drugs. In this work, we propose inhalable polymeric microparticles produced from chondroitin sulfate, a polymer composed by moieties recognized by macrophage receptors. Spray-drying of chondroitin sulfate in combination with two first-line antitubercular drugs (isoniazid and rifabutin) yielded respirable microparticles that evidenced no cytotoxic effects on lung epithelial cells (A549) and macrophages (dTHP1 and J744A.1). The microparticles exhibited tendency for macrophage capture in a dose-dependent manner, which was validated through imaging. High content image analysis revealed that rifabutin induced a dose-dependent increase in phospholipid content of macrophages, which could be prevented by formulation in chondroitin sulfate microparticles. This work provides indications on the potential of chondroitin sulfate carriers to interact with macrophages, thus providing a platform for drug delivery in the context of macrophage intracellular diseases, namely tuberculosis.