RESUMEN
3D porous scaffolds fabricated from binary and ternary blends of silk fibroin (SF), gelatin (G), and hyaluronan (HA) and crosslinked by the carbodiimide coupling reaction were developed. Water-stable scaffolds can be obtained after crosslinking, and the SFG and SFGHA samples were stable in cell culture medium up to 10 days. The presence of HA in the scaffolds with appropriate crosslinking conditions greatly enhanced the swellability. The microarchitecture of the freeze-dried scaffolds showed high porosity and interconnectivity. In particular, the pore size was significantly larger with an addition of HA. Biological activities of NIH/3T3 fibroblasts seeded on SFG and SFGHA scaffolds revealed that both scaffolds were able to support cell adhesion and proliferation of a 7-day culture. Furthermore, cell penetration into the scaffolds can be observed due to the interconnected porous structure of the scaffolds and the presence of bioactive materials which could attract the cells and support cell functions. The higher cell number was noticed in the SFGHA samples, possibly due to the HA component and the larger pore size which could improve the microenvironment for fibroblast adhesion, proliferation, and motility. The developed scaffolds from ternary blends showed potential in their application as 3D cell culture substrates in fibroblast-based tissue engineering.
Asunto(s)
Reactivos de Enlaces Cruzados/química , Fibroínas/química , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Bombyx , Adhesión Celular , Proliferación Celular , Fibroblastos/metabolismo , Liofilización , Gelatina/química , Ácido Hialurónico/metabolismo , Inmunohistoquímica , Ratones , Células 3T3 NIH , PorosidadRESUMEN
Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1-3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.
Asunto(s)
Fibroínas/química , Hidrogeles/química , Impresión Tridimensional , Ingeniería de Tejidos , Andamios del Tejido/químicaRESUMEN
The previously developed gelatin/silk fibroin microspheres were loaded with curcumin and applied for anti-inflammatory treatment in monosodium iodoacetate (MIA)-induced osteoarthritis (OA) in a rat model. The MIA-induced OA rats received a single intra-articular injection with gelatin or gelatin/silk fibroin (30/70) microspheres encapsulating curcumin. The therapeutic effects of treatment groups [concentration of interleukin-6 (IL-6) in blood serum, radiographic and the histological grading on articular joint] were compared with those of normal saline treated OA and normal rats. The result showed that both microsphere groups reduced the level of IL-6 in serum after 1 week of treatment. The gelatin/silk fibroin (30/70) microspheres encapsulating curcumin delayed the cellular destruction in articular joint and synovial tissue after 8 weeks. The radiographic and histological gradings on articular cartilage lesion and synovial tissue change of rats treated with gelatin/silk fibroin (30/70) microspheres encapsulating curcumin were close to those of the normal rats. It was explained that the slow-degrading gelatin/silk fibroin (30/70) microspheres released curcumin for extended period and showed a prolonged anti-inflammatory effect, compared to the fast-degrading gelatin microspheres. This delivery system of curcumin was suggested to be applied for localized treatment of anti-inflammatory in OA with minimal invasion.
RESUMEN
The objective of this study was to develop the microspheres from gelatin (G) and silk fibroin (SF) aimed to be applied for the controlled release of curcumin and piperine. The glutaraldehyde-crosslinked G/SF microspheres at various weight blending ratios (100/0, 70/30, 50/50, and 30/70) were successfully fabricated by water in oil emulsion technique. The microspheres prepared from all compositions were in a round shape with homogeneous size distribution both in the dried (194-217 µm) and swollen states (297-367 µm). When subjected in collagenase solution at physiological condition, the G microspheres gradually degraded within 14 days while the blended G/SF microspheres, particularly at 50/50 and 30/70, were not degraded. For the release application, the microspheres were loaded with curcumin and/or piperine. It was found that the microspheres composed of SF tended to entrap curcumin and piperine with the high entrapment and loading efficiencies, possibly due to their hydrophobic interactions. The G/SF microspheres, particularly at the ratios of 50/50 and 30/70, released curcumin and piperine in a sustained manner both for the single and dual release systems. The controlled dual release of curcumin and piperine from the G/SF microspheres would prolong their half-life, provide the optimal concentrations for therapeutic effects at a target site, and improve the bioavailability of curcumin. These novel injectable microspheres dually releasing curcumin and piperine would be introduced for the treatment of diseases without the need of operation.
Asunto(s)
Alcaloides/administración & dosificación , Benzodioxoles/administración & dosificación , Curcumina/administración & dosificación , Portadores de Fármacos , Fibroínas/química , Gelatina/química , Microesferas , Piperidinas/administración & dosificación , Alcamidas Poliinsaturadas/administración & dosificación , Seda/química , Materiales Biocompatibles , Microscopía Electrónica de RastreoRESUMEN
Triggerable coatings, such as pH-responsive polymethacrylate copolymers, can be used to protect the active pharmaceutical ingredients contained within oral solid dosage forms from the acidic gastric environment and to facilitate drug delivery directly to the intestine. However, gastrointestinal pH can be highly variable, which can reduce delivery efficiency when using pH-responsive drug delivery technologies. We hypothesized that biomaterials susceptible to proteolysis could be used in combination with other triggerable polymers to develop novel enteric coatings. Bioinformatic analysis suggested that silk fibroin is selectively degradable by enzymes in the small intestine, including chymotrypsin, but resilient to gastric pepsin. Based on the analysis, we developed a silk fibroin-polymethacrylate copolymer coating for oral dosage forms. In vitro and in vivo studies demonstrated that capsules coated with this novel silk fibroin formulation enable pancreatin-dependent drug release. We believe that this novel formulation and extensions thereof have the potential to produce more effective and personalized oral drug delivery systems for vulnerable populations including patients that have impaired and highly variable intestinal physiology.
Asunto(s)
Fibroínas , Humanos , Pancreatina , Sistemas de Liberación de Medicamentos , Ácidos Polimetacrílicos , Polímeros , SedaRESUMEN
The modification of human cancellous bone (hBONE) with silk fibroin/gelatin (SF/G) using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC)/N-hydroxysuccini-mide (NHS) crosslinking was established. The SF/G solutions at a weight ratio of 50/50 and the solution concentrations of 1, 2, and 4 wt % were studied. SF/G sub-matrix was formed on the surface and inside pore structure of hBONE. All hBONE scaffolds modified with SF/G showed smaller pore sizes, less porosity, and slightly lower compressive modulus than unmodified hBONE. SF/G sub-matrix was gradually biodegraded in collagenase solution along 4 days. The hBONE scaffolds modified with SF/G, particularly at 2 and 4 wt % solution concentrations, promoted attachment, proliferation, and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (MSC), comparing to the original hBONE. The highest cell number, ALP activity and calcium production were observed for MSC cultured on the hBONE scaffolds modified with 4 wt % SF/G. The mineralization was also remarkably induced in the cases of modified hBONE scaffolds as observed from the deposited calcium phosphate by EDS. The modification of hBONE with SF/G was, therefore, the promising method to enhance the osteoconductive potential of human bone graft for bone tissue engineering.
Asunto(s)
Sustitutos de Huesos , Fibroínas , Gelatina , Seda/química , Adhesión Celular , Diferenciación Celular , Proliferación Celular , Humanos , Células Madre Mesenquimatosas/citología , Espectrometría por Rayos XRESUMEN
The aim of this study was to investigate physical and biological properties of collagen (COL) and demineralized bone powder (DBP) scaffolds for bone tissue engineering. DBP was prepared and divided into three groups, based on various particle sizes: 75-125 µm, 125-250 µm, and 250-500 µm. DBP was homogeneously mixed with type I collagen and three-dimensional scaffolds were constructed, applying chemical crosslinking and lyophilization. Upon culture with human periosteum-derived cells (PD cells), osteogenic differentiation of PD cells was investigated using alkaline phosphatase (ALP) activity and calcium assay kits. The physical properties of the COL/DBP scaffolds were obviously different from COL scaffolds, irrespective of the size of DBP. In addition, PD cells cultured with COL scaffolds showed significantly higher cell adhesion and proliferation than those with COL/DBP scaffolds. In contrast, COL/DBP scaffolds exhibited greater osteoinductive potential than COL scaffolds. The PD cells with COL/DBP scaffolds possessed higher ALP activity than those with COL scaffolds. PD cells cultured with COL/DBP scaffolds with 250-500 mm particle size yielded the maximum calcium deposition. In conclusion, PD cells cultured on the scaffolds could exhibit osteoinductive potential. The composite scaffold of COL/DBP with 250-500 mm particle size could be considered a potential bone tissue engineering implant.
Asunto(s)
Sustitutos de Huesos/química , Proliferación Celular , Osteogénesis , Periostio/metabolismo , Ingeniería de Tejidos , Andamios del Tejido/química , Células Cultivadas , Humanos , Periostio/citologíaRESUMEN
Gamma irradiation, which is one of the more conventional sterilization methods, was used to induce the hydrogelation of silk fibroin in this study. The physical and chemical characteristics of the irradiation-induced silk fibroin hydrogels were investigated. Silk fibroin solution with a concentration greater than 1 wt% formed hydrogel when irradiated by gamma rays at a dose of 25 or 50 kGy. The hydrogel induced by 50 kGy of radiation was more thermally stable at 80 °C than those induced by 25 kGy of radiation. When compared to the spontaneously formed hydrogels, the irradiated hydrogels contained a greater fraction of random coils and a lower fraction of ß-sheets. This finding implies that gelation via gamma irradiation occurs via other processes, in addition to crystalline ß-sheet formation, which is a well-established mechanism. Our observation suggests that crosslinking and chain scission via gamma irradiation could occur in parallel with the ß-sheet formation. The irradiation-induced hydrogels were obtained when the solution concentration was adequate to support the radiation crosslinking of the silk fibroin chains. This work has, therefore, demonstrated that gamma irradiation can be employed as an alternative method to produce chemical-free, random coil-rich, and sterilized silk fibroin hydrogels for biomedical applications.
RESUMEN
Silk fibroin (SF) scaffolds have widely been used as functional materials for tissue engineering and implantation. For long-term applications, many cross-linking strategies have been developed to enhance the stability and enzymatic degradation of scaffolds. Although the biocompatibility of SF scaffolds has been investigated, less is known about the extent to which the degradation products of these scaffolds affect the host response in the long term after implantation. In this work, we first studied the effect of two different crosslinkers, namely, 1-ethyl-3-(3-dimethylaminopropyl-carbodiimide hydrochloride) (EDC) and glutaraldehyde (GA), on the topology, mechanical stability and enzymatic degradation of SF scaffolds. We found that the SF scaffolds treated with GA (GA-SF) appeared to show an increase in the sheet thickness and a higher elastic modulus when compared to that treated with EDC (EDC-SF) at a similar level of crosslinking degree. The uncrosslinked and both crosslinked SF scaffolds were completely digested by proteinase K but were not susceptible to degradation by collagenase type IV and trypsin. We next investigated the effect of the degradation of SF on the cytotoxicity, genotoxicity, and immunogenicity. The results demonstrated that the degradation products of the uncrosslinked and crosslinked SFs did not trigger cell proliferation, cell death, or genotoxicity in primary human cells, while they appeared to modulate the phenotypes of macrophages. The degradation products of GA-SF promoted pro-inflammatory phenotypes, while those from EDC-SF enhanced polarization towards anti-inflammatory macrophages. Our results demonstrated that the degradation products of SF scaffolds can mediate the immune modulation of macrophages, which can be implemented as a therapeutic strategy to control the long-term immune response during implantation.
Asunto(s)
Fibroínas , Humanos , Fibroínas/farmacología , Andamios del Tejido , Ingeniería de Tejidos/métodos , Carbodiimidas , Reactivos de Enlaces Cruzados , GlutaralRESUMEN
Flexible films were prepared from silk fibroin (SF) and gelatin (GA) with a presence of glycerol (Gly), followed by water vapor annealing to achieve water-insoluble matrices. The blended SF/GA/Gly films were chemically conjugated with tobacco mosaic virus (TMV), either native (TMV-wt) or genetically modified with Arg-Gly-Asp (RGD) sequences (TMV-rgd), to improve cellular responses. The attachment and proliferation of L929 cells on TMV-decorated films were improved, possibly due to enhanced surface roughness. The cellular responses were pronounced with TMV-rgd, due to the proper decoration of RGD, which is an integrin recognition motif supporting cell binding. However, the biological results were inconclusive for human primary cells because of an innate slow growth kinetic of the cells. Additionally, the cells on SF/GA/Gly films were greater populated in S and G2/M phase, and the cell cycle arrest was notably increased in the TMV-conjugated group. Our findings revealed that the films modified with TMV were cytocompatible and the cellular responses were significantly enhanced when conjugated with its RGD mutants. The biological analysis on the cellular mechanisms in response to TMV is further required to ensure the safety concern of the biomaterials toward clinical translation.
Asunto(s)
Fibroínas , Nanopartículas , Materiales Biocompatibles , Fibroínas/metabolismo , Glicerol , Humanos , Oligopéptidos/farmacología , SedaRESUMEN
The tissue engineering triad comprises the combination of cells, scaffolds and biological factors. Therefore, we prepared cell- and drug-loaded hydrogels using in situ silk fibroin (SF) hydrogels induced by dimyristoyl glycerophosphoglycerol (DMPG). DMPG is reported to induce rapid hydrogel formation by SF, facilitating cell encapsulation in the hydrogel matrix while maintaining high cell viability and proliferative capacity. In addition, DMPG can be used for liposome formulations in entrapping drug molecules. Dexamethasone (Dex) was loaded into the DMPG-induced SF hydrogels together with human osteoblast-like SaOS-2 cells, then the osteogenic differentiation of the entrapped cells was evaluated in vitro and compared to cells cultured under standard conditions. Calcium production by cells cultured in DMPG/Dex-SF hydrogels with Dex-depleted osteogenic medium was equivalent to that of cells cultured in conventional osteogenic medium containing Dex. The extended-release of the entrapped Dex by the hydrogels was able to provide a sufficient drug amount for osteogenic induction. The controlled release of Dex was also advantageous for cell viability even though its dose in the hydrogels was far higher than that in osteogenic medium. The results confirmed the possibility of using DMPG-induced SF hydrogels to enable dual cell and drug encapsulation to fulfil the practical applications of tissue-engineered constructs.
RESUMEN
Bombyx mori silk fibroin (SF), from Nangnoi Srisaket 1 Thai strain, has shown potential for various biomedical applications such as wound dressing, a vascular patch, bone substitutes, and controlled release systems. The hemocompatibility of this SF is one of the important characteristics that have impacts on such applications. In this study, the hemocompatibility of Thai SF was investigated and its improvement by low molecular weight heparin (LMWH) immobilization was demonstrated. Endothelial cell proliferation on the SF and LMWH immobilized SF (Hep/SF) samples with or without fibroblast growth factor-2 (FGF-2) was also evaluated. According to hemocompatibility evaluation, Thai SF did not accelerate clotting time, excess stimulate complement and leukocyte activation, and was considered a non-hemolysis material compared to the negative control PTFE sheet. Platelet adhesion of SF film was comparable to that of the PTFE sheet. For hemocompatibility enhancement, LMWH was immobilized successfully and could improve the surface hydrophilicity of SF films. The Hep/SF films demonstrated prolonged clotting time and slightly lower complement and leukocyte activation. However, the Hep/SF films could not suppress platelet adhesion. The Hep/SF films demonstrated endothelial cell proliferation enhancement, particularly with FGF-2 addition. This study provides fundamental information for the further development of Thai SF as a hemocompatible biomaterial.
RESUMEN
BACKGROUND: A novel biodegradable scaffold including gelatin (G), chitooligosaccharide (COS), and demineralized bone matrix (DBM) could play a significant part in bone tissue engineering. The present study aimed to investigate the biological characteristics of composite scaffolds in combination of G, COS, and DBM for in vitro cell culture and in vivo animal bioassays. METHODS: Three-dimensional scaffolds from the mixture of G, COS, and DBM were fabricated into 3 groups, namely, G, GC, and GCD using a lyophilization technique. The scaffolds were cultured with mesenchymal stem cells (MSCs) for 4 weeks to determine biological responses such as cell attachment and cell proliferation, alkaline phosphatase (ALP) activity, calcium deposition, cell morphology, and cell surface elemental composition. For the in vivo bioassay, G, GC, and GCD, acellular scaffolds were implanted subcutaneously in 8-week-old male Wistar rats for 4 weeks and 8 weeks. The explants were assessed for new bone formation using hematoxylin and eosin (H&E) staining and von Kossa staining. RESULTS: The MSCs could attach and proliferate on all three groups of scaffolds. Interestingly, the ALP activity of MSCs reached the greatest value on day 7 after cultured on the scaffolds, whereas the calcium assay displayed the highest level of calcium in MSCs on day 28. Furthermore, weight percentages of calcium and phosphorus on the surface of MSCs after cultivation on the GCD scaffolds increased when compared to those on other scaffolds. The scanning electron microscopy images showed that MSCs attached and proliferated on the scaffold surface thoroughly over the cultivation time. Mineral crystal aggregation was evident in GC and greatly in GCD scaffolds. H&E staining illustrated that G, GC, and GCD scaffolds displayed osteoid after 4 weeks of implantation and von Kossa staining confirmed the mineralization at 8 weeks in G, GC, and GCD scaffolds. CONCLUSION: The MSCs cultured in GCD scaffolds revealed greater osteogenic differentiation than those cultured in G and GC scaffolds. Additionally, the G, GC, and GCD scaffolds could promote in vivo ectopic bone formation in rat model. The GCD scaffolds exhibited maximum osteoinductive capability compared with others and may be potentially used for bone regeneration.
RESUMEN
Binary-blended hydrogels fabricated from Bombyx mori silk fibroin (SF) and recombinant spider silk protein eADF4(C16) were developed and investigated concerning gelation and cellular interactions in vitro. With an increasing concentration of eADF4(C16), the gelation time of SF was shortened from typically one week to less than 48 h depending on the blending ratio. The biological tests with primary cells and two cell lines revealed that the cells cannot adhere and preferably formed cell aggregates on eADF4(C16) hydrogels, due to the polyanionic properties of eADF4(C16). Mixing SF in the blends ameliorated the cellular activities, as the proliferation of L929 fibroblasts and SaOS-2 osteoblast-like cells increased with an increase of SF content. The blended SF:eADF4(C16) hydrogels attained the advantages as well as overcame the limitations of each individual material, underlining the utilization of the hydrogels in several biomedical applications.
RESUMEN
The present study investigated the chemical properties and antityrosinase activities of SS (silk sericin) extracted from different Thai silk strains via various extraction methods. Different silk strains contain distinct SS with various amino acid compositions, which are significantly influenced by the extraction method used. Urea extraction of SS was the only method that provided clearly distinguishable bands and had the most significant impact on SS conformation as illustrated by FTIR (Fourier-transform infrared) spectra. The use of urea or either acidic or alkaline chemicals in the extraction process also influenced SS thermal behaviour. With regard to biological activity, SS extracted using urea exhibited the highest antityrosinase activity, whereas alkali-degraded SS showed no inhibition of mushroom tyrosinase. Pigments, primarily flavonoids and carotenoids from silk cocoons, were also found to enhance tyrosinase inhibition of SS.
Asunto(s)
Bombyx/química , Proteínas Fúngicas , Proteínas de Insectos , Monofenol Monooxigenasa , Sericinas , Animales , Proteínas Fúngicas/antagonistas & inhibidores , Proteínas Fúngicas/química , Proteínas de Insectos/química , Proteínas de Insectos/aislamiento & purificación , Monofenol Monooxigenasa/antagonistas & inhibidores , Monofenol Monooxigenasa/química , Sericinas/química , Sericinas/aislamiento & purificación , Urea/químicaRESUMEN
This work aimed to investigate tissue responses and biodegradation, both in vitro and in vivo, of four types of Bombyx mori Thai silk fibroin based-scaffolds. Thai silk fibroin (SF), conjugated gelatin/Thai silk fibroin (CGSF), hydroxyapatite/Thai silk fibroin (SF4), and hydroxyapatite/conjugated gelatin/Thai silk fibroin (CGSF4) scaffolds were fabricated using salt-porogen leaching, dehydrothermal/chemical crosslinking and an alternate soaking technique for mineralization. In vitro biodegradation in collagenase showed that CGSF scaffolds had the slowest biodegradability, due to the double crosslinking by dehydrothermal and chemical treatments. The hydroxyapatite deposited from alternate soaking separated from the surface of the protein scaffolds when immersed in collagenase. From in vivo biodegradation studies, all scaffolds could still be observed after 12 weeks of implantation in subcutaneous tissue of Wistar rats and also following ISO10993-6: Biological evaluation of medical devices. At 2 and 4 weeks of implantation the four types of Thai silk fibroin based-scaffolds were classified as "non-irritant" to "slight-irritant", compared to Gelfoam(®) (control samples). These natural Thai silk fibroin-based scaffolds may provide suitable biomaterials for clinical applications.
Asunto(s)
Implantes Absorbibles , Resinas Compuestas/farmacología , Resinas Compuestas/farmacocinética , Durapatita/química , Fibroínas/química , Gelatina/química , Andamios del Tejido , Implantes Absorbibles/efectos adversos , Animales , Resinas Compuestas/síntesis química , Durapatita/farmacocinética , Durapatita/farmacología , Femenino , Fibroínas/farmacocinética , Fibroínas/farmacología , Gelatina/farmacocinética , Gelatina/farmacología , Ensayo de Materiales , Implantación de Prótesis/métodos , Ratas , Ratas Wistar , Seda , Tejido Subcutáneo/efectos de los fármacos , Tejido Subcutáneo/metabolismo , Andamios del Tejido/efectos adversos , Andamios del Tejido/químicaRESUMEN
Accelerating the gelation of silk fibroin (SF) solution from several days or weeks to minutes or few hours is critical for several applications (e.g., cell encapsulation, bio-ink for 3D printing, and injectable controlled release). In this study, the rapid gelation of SF induced by a gold salt (Au3+) as well as the cytocompatibility of Au3+-mediated SF hydrogels are reported. The gelation behaviors and mechanisms of regenerated SF and thiolated SF (tSF) were compared. Hydrogels can be obtained immediately after mixing or within three days depending on the types of silk proteins used and amount of Au3+. Au3+-mediated SF and tSF hydrogels showed different color appearances. The color of Au-SF hydrogels was purple-red, whereas the Au-tSF hydrogels maintained their initial solution color, indicating different gelation mechanisms. The reduction of Au3+ by amino groups and further reduction to Au by tyrosine present in SF, resulting in a dityrosine bonding and Au nanoparticles (NPs) production, are proposed as underlying mechanisms of Au-SF gel formation. Thiol groups of the tSF reduced Au3+ to Au+ and formed a disulfide bond, before a formation of Au+-S bonds. Protons generated during the reactions between Au3+ and SF or tSF led to a decrease of the local pH, which affected the chain aggregation of the SF, and induced the conformational transition of SF protein to beta sheet. The cytocompatibility of the Au-SF and tSF hydrogels was demonstrated by culturing with a L929 cell line, indicating that the developed hydrogels can be promising 3D matrices for different biomedical applications.
Asunto(s)
Fibroínas , Oro , Hidrogeles , Ensayo de Materiales , Nanopartículas del Metal/química , Animales , Línea Celular , Fibroínas/química , Fibroínas/farmacología , Oro/química , Oro/farmacología , Hidrogeles/química , Hidrogeles/farmacología , RatonesRESUMEN
The administration of a drug-loaded implantable hydrogel at the tumor site after surgical resection is a viable approach to prevent the local recurrence or metastasis. Dimyristoyl glycerophosphorylglycerol (DMPG)-based liposomes were developed for inducing the rapid gelation of silk fibroin (SF) and delivering an anticancer drug, curcumin. Curcumin was loaded in the liposomes and the stability of curcumin was enhanced. The gelation time of liposome-induced SF hydrogels ranged from 3 min to more than 6 h. The biological activity of liposome-SF hydrogels was evaluated in vitro using L929 fibroblasts and MDA-MB-231 breast cancer cells. The release of curcumin can inhibit the growth of cancer cells. Both cells cultured on the surface of the hydrogels loaded with curcumin displayed low cell survival due to the combination of low cell attachment and cytotoxicity of curcumin. Liposome-SF hydrogels show potential as a sealant administered at the tumor site to eliminate residual cancer cells after tumor removal.
Asunto(s)
Curcumina , Fibroínas , Supervivencia Celular , Hidrogeles , Liposomas , SedaRESUMEN
Silk fibroin (SF) hydrogels can be obtained via self-assembly, but this process takes several days or weeks, being unfeasible to produce cell carrier hydrogels. In this work, a phospholipid, namely, 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) sodium salt (DMPG), was used to induce and accelerate the gelation process of SF solutions. Due to the amphipathic nature and negative charge of DMPG, electrostatic and hydrophobic interactions between the phospholipids and SF chains will occur, inducing the structural transition of SF chains to the beta sheet and consequently a rapid gel formation is observed (less than 50 min). Moreover, the gelation time can be controlled by varying the lipid concentration. To assess the potential of the hydrogels as cell carriers, several mammalian cell lines, including L929, NIH/3T3, SaOS-2, and CaSki, were encapsulated into the hydrogel. The silk-based hydrogels supported the normal growth of fibroblasts, corroborating their cytocompatibility. Interestingly, an inhibition in the growth of cancer-derived cell lines was observed. Therefore, DMPG-induced SF hydrogels can be successfully used as a 3D platform for in situ cell encapsulation, opening promising opportunities in biomedical applications, such as in cell therapies and tissue regeneration.
Asunto(s)
Fibroínas/química , Hidrogeles/química , Fosfolípidos/química , Regeneración , Ingeniería de Tejidos/métodos , Animales , Bombyx , Línea Celular , Proliferación Celular , Supervivencia Celular , Fibroblastos/efectos de los fármacos , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Ratones , Células 3T3 NIH , Fosfatidilgliceroles/química , Seda/química , Espectrometría de Fluorescencia , Espectroscopía Infrarroja por Transformada de Fourier , Electricidad Estática , Viscosidad , Cicatrización de Heridas/efectos de los fármacosRESUMEN
The cassava starch processing plays an important role in food industries. During starch processing stage, a large amount of cassava starch waste (CSW) which mainly contains lost starch product and solid residue such as cassava bagasse are produced. Starch and cassava bagasse can be hydrolyzed into fermentable sugar such as glucose. In the present study, the solution plasma process (SPP) is used to treat CSW to prepare reducing sugar. The investigated parameters are treatment time, solvent concentration, applied pulsed frequency, and CSW concentration. The %yield of total reducing sugar (TRS) and glucose were calculated by DNS method and glucose assay kit, respectively. The chemical structure, morphology, and crystal structure of plasma-treated CSW were investigated. The results showed that the %yield of TRS was greatly enhanced by SPP treatment compared to that of acid hydrolysis. The CSW powder completely broke down into pieces after SPP treatment was applied. The amorphous and crystalline regions of CSW were destroyed during SPP treatment. SPP treatment of CSW with light sulfuric acid concentration of 0.08 M, applied pulsed frequency of 30 kHz, and CSW concentration of 0.5%w/v provided 99.0% TRS and 47.9% glucose.