Simultaneous measurement of refractive index and temperature based on a side-polish and V-groove plastic optical fiber SPR sensor.

A simple plastic optical fiber (POF) based surface plasmon resonance (SPR) sensor is proposed and demonstrated for simultaneous measurement of refractive index (RI) and temperature. The sensor consists of a series of V-grooves along the POF and a side-polish structure at the other side of the fiber. The V-groove structure can alter the SPR excitation angle and act as a mode filter, effectively enhancing the SPR effect and narrowing the SPR wavelength width. After coating a layer of thermosensitive material-polydimethylsiloxane (PDMS) film on half part of the fiber probe, a dual-parameter sensor probe is obtained for RI and temperature measurement. Experimental results show the RI sensitivity of the prepared probe can reach 1546 nm/RIU in the RI range of 1.335-1.37 RIU and the temperature sensitivity is -0.83 nm/°C in the temperature range of 20-80°C. The sensor is simple in structure and low cost, and has potential applications in the biochemical sensing fields.

Fiber-integrated catenary ring-array metasurfaces for beam shaping.

Catenary is referred to as "the real mathematical and mechanical form" in the architectural field. Because of the unique phase control characteristic of the catenary, it has excellent ability in optical manipulation. Here, we propose an optical waveform conversion device based on optical fiber-integrated catenary ring-array metasurfaces. The device consists of a cascade structure of a single-mode fiber (SMF) and a graded-index fiber (GIF). At the GIF end, two kinds of catenary ring-array metasurfaces are introduced to realize beam shaping from Gaussian beam (GB) to Bessel beam. The device can selectively generate a focused or non-diffracting Bessel beam by changing the circular polarization state of the incident light. It is worth noting that under some parameters of the device, the output Bessel beam can break through the diffraction limit, which has potential applications in the fields of optical imaging, optical communication, and optical trapping.

Optical fiber-integrated achromatic metalens based on catenary metasurfaces.

A challenge in all-fiber-integrated metasurface devices is to efficiently control dispersion in the limited fiber end area to build metasurfaces, therefore, the design of metasurfaces with a special structure becomes crucial to meet the demands of dispersion control. A unique phase response of circularly polarized light in catenary metasurfaces can offer new opportunities for polarization-sensitive arbitrary chromatic dispersion control. Herein, we proposed an optical achromatic metalens based on equal width catenary metasurfaces integrated on the large-mode optical fiber (LMF) end. To reduce phase distortions, the LMF is designed to generate quasi-plane waves (QPW), and then QPW converts from catenary metasurfaces to realize achromatic focusing. A notable feature of this device is its axial focal length shift as low as 0.09% across the working wavelength range from 1.33 µm to 1.55 µm, commonly used in optical fiber communication, demonstrating its excellent dispersion control capability. Furthermore, the device exhibits exceptional capabilities to break through the diffraction limit of the output field. This research has potential applications in the fields of achromatic devices, chromatic aberration correction, fiber lasers, and optical communication and modulation.

SPP excitation and coupling mechanism based on micro/nano fibers.

A hot trend in the development of optoelectronic devices is how to use the principle of surface plasmon resonance to enhance the performance of integrated photonics devices and achieve miniaturization. This paper proposes an accompanying waveguide coupling structure of micro/nano fibers, which consists of two parallel-placed micro/nano fibers (MNFs) coated with a silver film in the waist region and infused with a refractive index matching oil. In the overlapping region, there exists a segment of surface plasmon polaritons (SPPs) coupling area. The excitation and coupling characteristics of SPPs are studied through numerical simulation. Optimal coupling enhancement configuration is obtained by studying variables such as spacing distance, coupling length, and metal film thickness. A comparison is made with the SPP intensity of a single MNF, showing a 220% increase in electric field intensity, demonstrating its excellent coupling effect. By using this coupling structure, exploration of SPPs excitation and coupling mechanisms is enhanced, and structures resembling interferometric devices can be designed, providing new insights for high-performance miniaturized devices.

Simulation study of a temperature-calibrated double-sided polished optical fiber SPR refractive index sensor.

The temperature of the environment directly affects the accuracy of refractive index (RI) measurement. Therefore, we propose a double-sided polished surface plasmon resonance (SPR) RI fiber sensor, which is available for simultaneous measurement of the RI and temperature in real time. The proposed sensor uses single-mode fiber as a special double-sided polishing structure. The double-sided polishing regions are coated with a gold-silver hybrid film; one side is additionally coated with graphene layers to increase detection sensitivity, and the other side is coated with polydimethylsiloxane on the metal layer for temperature sensing. The simulation result shows that in the range from 1.33 to 1.35, RI sensitivity reaches as high as 2600 nm/RIU. In the range from 15°C to 85°C, temperature sensitivity reaches as high as -3.5n m/∘ C. The full width at half maximum is 65 nm. Compared with previous studies, the sensitivity is slightly improved, and an excellent temperature compensation effect can be achieved. It is suitable for high-precision measurement of the environment and biochemical aspects.

Simulation Study of High Sensitivity Fiber SPR Temperature Sensor with Liquid Filling.

In this paper, a high sensitivity fiber temperature sensor based on surface plasmon resonance is designed and studied. In the simulation, the single mode fiber is polished to remove most of the cladding, and then gold and silver films are added. Finally, it is embedded in the heat shrinkable tube filled with a thermo-optic coefficient liquid for curing. The numerical simulation results show that the sensing characteristics are sensitive to the remaining cladding thickness of the fiber, the thickness of the gold film and the thickness of the silver film. When the thermo-optic coefficient of the filling liquid is -2.8 × 10-4/°C, the thickness of the gold film, the thickness of the silver film and the thickness of the remaining cladding of the fiber are 30 nm, 20 nm and 1 µm, respectively. The sensitivity of the sensor designed in this paper can reach -6 nm/°C; this result is slightly higher than that of similar research in recent years. It will have a promising application prospect in flexible wearable temperature sensors, smart cities and other fields.

Side-Polish Plastic Optical Fiber Based SPR Sensor for Refractive Index and Liquid-Level Sensing.

In this work, a simple side-polish plastic optical fiber (POF)-based surface plasmon resonance (SPR) sensor is proposed and demonstrated for simultaneous measurement of refractive index (RI) and liquid level. The effects of side-polish depths on the sensing performance were studied. The experimental results show that the SPR peak wavelength will be changed as the RI changes, and the SPR peak intensity will be changed with the liquid level variation. By monitoring the changes in peak wavelength and intensity, the RI and liquid level can be detected simultaneously. Experimental results show that an RI sensitivity of 2008.58 nm/RIU can be reached at an RI of 1.39. This sensor has the advantages of simple structure and low cost, which has a good prospect in the field of biochemical sensing.

Ultra-high sensitivity SPR temperature sensor based on a helical-core fiber.

A novel compact ultra-high sensitivity optical fiber temperature sensor based on surface plasmon resonance (SPR) is proposed and demonstrated. The sensor is fabricated by employing a helical-core fiber (HCF), which is polished as a D-type fiber on the helical-core region and coated with a layer of Au-film and polydimethylsiloxane (PDMS). The theoretical and experimental results show that the resonant wavelength and sensitivity of the proposed sensor can be effectively adjusted by changing the twisting pitch of HCF. Due to the high refractive index sensitivity of the sensor and the high thermo-optic coefficient of PDMS, the maximum sensitivity can reach -19.56 nm/°C at room temperature when the twist pitch of HCF is 2.1 mm. It is worth noting that the sensitivity can be further improved by using a shorter pitch of HCF. The proposed SPR temperature sensor has adjustable sensitivity, is easy to realize distributed sensing, and has potential application prospects in biomedical, healthcare, and other fields.

Tunable circular dichroism based on graphene-metal split ring resonators.

The chiroptical response of the chiral metasurface can be characterized by circular dichroism, which is defined as the absorption difference between left-handed circularly polarized incidence and right-handed circularly incidence. It can be applied in biology, chemistry, optoelectronics, etc. Here, we propose a dynamically tunable chiral metasurface structure, which is composed of two metal split-ring resonators and a graphene layer embedded in dielectric. The structure reflects right-handed circularly polarized waves and absorbs left-handed circularly polarized waves under normal incidence. The overall unit structural parameters of the chiral metasurface were discussed and analyzed, and the circular dichroism was 0.85 at 1.181 THz. Additionally, the digital imaging function can be realized based on the chiral metasurface structure, and the resolution of terahertz digital imaging can be dynamically tuned by changing the Fermi level of graphene. The proposed structure has potential applications in realizing tunable dynamic imaging and other communication fields.

Dual-color meta-image display with a silver nanopolarizer based metasurface.

Plasmonic metallic nanostructures with anisotropic design have unusual polarization-selective characteristic which can be utilized to build nanopolarizers at the nanoscale. Herein, we propose a dual-color image display platform by reconfiguring two types of silver nanoblocks in a single-celled metasurface. Governed by Malus's law, the two types of silver nanoblocks both acting as nanopolarizers with different orientations can continuously modulate the intensity of incident linearly polarized red and green light pixel-by-pixel, respectively. As a result, an ultra-compact, high-resolution, and continuous-greyscale dual-color image can be recorded right at the surface of the meta-device. We demonstrate the dual-color Malus metasurface by successfully encoding and decoding a red-green continuously-grayscale image into a metasurface sample. The experimentally captured meta-image with high-fidelity and resolution as high as 63500 dots per inch (dpi) has verified our proposal. With the advantages such as continuous grayscale modulation, ultrathin, high stability and high density, the proposed dual-color encoded metasurfaces can be readily used in ultra-compact image displays, high-end anti-counterfeiting, high-density optical information storage and information encryption, etc.

An Enhanced Plastic Optical Fiber-Based Surface Plasmon Resonance Sensor with a Double-Sided Polished Structure.

An enhanced plastic optical fiber (POF)-based surface plasmon resonance (SPR) sensor is proposed by employing a double-sided polished structure. The sensor is fabricated by polishing two sides of the POF symmetrically along with the fiber axis, and a layer of Au film is deposited on each side of the polished region. The SPR can be excited on both polished surfaces with Au film coating, and the number of light reflections will be increased by using this structure. The simulation and experimental results show that the proposed sensor has an enhanced SPR effect. The visibility and full width at half maximum (FWHM) of spectrum can be improved for the high measured refractive index (RI). A sensitivity of 4284.8 nm/RIU is obtained for the double-sided POF-based SPR sensor when the measured liquid RI is 1.42. The proposed SPR sensor is easy fabrication and low cost, which can provide a larger measurement range and action area to the measured samples, and it has potential application prospects in the oil industry and biochemical sensing fields.

Spin-orbital coupling of quadratic-power-exponent-phase vortex beam propagating in a uniaxial crystal.

Recent studies have shown that quadratic-power-exponent-phase (QPEP) vortex and modified QPEP vortex have some novel properties and potential applications in optical manipulation, orbital angular momentum (OAM) communication, OAM multicasting and so on. In these applications, there may be potential need of processing these kinds of beams by using uniaxial crystals. In this paper, the analytical propagation equations of Gaussian QPEP vortex and modified QPEP vortex propagating in uniaxial crystals are derived and the evolution of the angular momentum via spin-orbital coupling during the propagation is investigated. This may be meaningful for guiding and promoting the applications of the QPEP vortex and modified QPEP vortex.

Polarization controllable generation of flat superimposed OAM states based on metasurface.

In this paper, two kind of metasurface-based flat orbital angular momentum (OAM) superposition-state generators are proposed, which can generate OAM superposition states possessing tens of OAM modes being evenly spaced by topological charge number 1. The power spectra of the generated OAM superposition states are flat. The power variation of the OAM modes of the OAM superposition states from one generator is less than 3 dB, and the power variation of the OAM modes of the OAM superposition states from the other one is less than 0.3 dB. By controlling the left-handed and right-handed circular polarization states of the incident light, the OAM spectra of the OAM superposition states generated in the two polarization cases are separated from each other, therefore, the proposed generators are light polarization controllable. In addition, the two generators can operate efficiently on a wide wavelength region ranging from 635nm to 730nm. Our work may have some potential applications, such as used for OAM multicasting, OAM based optical manipulation, or manufacturing integrated OAM-superposition-state generators and OAM modulation devices.

Displacement Sensor Based on a Small U-Shaped Single-Mode Fiber.

A simple structure and easily fabricated displacement sensor was proposed and demonstrated based on a bending-induced fiber interferometer. In the design, the fiber interferometer was formed only by bending the single-mode fiber into a small U-shape without splicing, tapering, or heating pre-processing, which effectively reduces the complexity of the fabrication process, greatly enhances the mechanical strength of the sensor, and lowers the cost in the displacement sensing applications. The displacement sensing performances for the sensor with different bending radii of 3.3 mm, 4.4 mm, 5.0 mm, and 6.3 mm were investigated. Experimental results showed that the sensor had a good linear response, and for the bending radii of 3.3, 4.4, 5.0, and 6.3 mm, the proposed sensors showed high sensitivities of 134.3, 105.1, 120.9, and 144.1 pm/µm, respectively.

Proposed phase plate for superimposed orbital angular momentum state generation.

In this letter, a quadratic phase plate (QPP) whose thickness increases quadratically with azimuthal angle φ is proposed. When a beam with initial topological charge m (m could be an arbitrary integer) is passed through the plate, quadratic phase modulation can be expected to expand the initial single orbital angular momentum (OAM) mode to a superimposed OAM state. The obtained multi-OAM state exhibits a comb-like OAM spectrum, which shows a flat region. The power variation of the OAM modes within the flat region is less than 3 dB, while the power for the OAM modes with charge numbers out of the flat region decays rapidly. Moreover, the number of OAM modes within the flat region can reach dozens. This may have potential applications in the field of communication, quantum information and optical manipulation, etc.

Liquid Level Sensor Based on a V-Groove Structure Plastic Optical Fiber.

A high sensitivity and easily fabricated liquid level sensor based on the V-groove structure plastic optical fiber (POF) was described. In the design, the V-groove structure on the POF is produced by using a die-press-print method, which effectively reduces the complexity of the fabrication process and makes it easier for mass production of liquid level sensors. This greatly enhances the usefulness of the proposed sensor in cost effective liquid level sensing applications. The transmission characteristic of the POF could be changed when the V-groove structure was immerged or emerged by the rising or falling liquid. The liquid level sensing performances for the sensor probes with different structural parameters were investigated, and the sensor performances for the liquids with different refractive indices and the sensor dynamic response were also tested. Experimental results show that the sensor's sensitivity can reach 0.0698 mm-1, with a resolution of 2.5 mm. Results also show that the sensor has a fast response time of 920 ms.

Annular arrayed-waveguide fiber for autofocusing Airy-like beams.

We propose and theoretically demonstrate a novel optical fiber with an annular arrayed-waveguide to implement Airy phase and amplitude modulation, and generate an abruptly autofocusing circular Airy beam. The properties of wave propagation in Airy fiber and free space are studied by using the coupled-mode theory and angular spectrum method. The calculated results show that the output beam from such a fiber has a circular Airy-like pattern and can autofocus with the intensity maxima following a parabolic trajectory. We also show that the position of the focus point of the output beam from the Airy fiber can be easily controlled by changing input wavelength.

Airy-like beam transverse acceleration control by rainbow effect.

We propose and numerically analyze the transverse acceleration control for the Airy-like beams from incomplete Airy waveguide and Airy waveguide by rainbow effect. We show that the Airy-like beams have an obvious change in transverse acceleration with a slight variation (10 nm) in incident wavelength. The rainbow phenomenon is introduced to study the Airy-like beam propagation with a different wavelength. The equivalent initial launch angle is also considered to explain transverse acceleration of the Airy-like beams.

Cascaded plastic optical fiber based SPR sensor for simultaneous measurement of refractive index and temperature.

A cascaded side-polish plastic optical fiber (POF) and FONTEX optical fiber based surface plasmon resonance (SPR) sensor is proposed for simultaneous measurement of refractive index (RI) and temperature. The side-polish POF and FONTEX optical fiber are connected by using the UV glue in a Teflon plastic tube. The SPR phenomenon can be excited at both of the side-polish region and the FONTEX fiber cladding. The polydimethylsiloxane (PDMS) is coated on the side-polish POF to get a temperature sensing channel. Due to the low RI sensitivity of the FONTEX optical fiber, the cascaded fiber sensor can obtain a broader RI measurement range with a low crosstalk. An RI sensitivity of 700 nm/RIU in the RI measurement range of 1.335-1.39 and a temperature sensitivity of -1.02 nm/°C measured in deionized water with a range of 20-60 °C are obtained. In addition, the cascaded POF based SPR sensor has potential application prospects in the field of biochemical sensing.

Generation of Airy-like wave with one-dimensional waveguide array.

We propose and demonstrate a approach for Airy-like wave generation using one-dimensional arrayed waveguides instead of a cubic phase plate and a Fourier lens. We show that this Airy-like wave with quasi-Airy amplitude and quasi-cubic phase from arrayed waveguides end has abilities to remain quasi-nondiffracting and freely accelerating during propagation. We also study wave propagation in these waveguides based on supermode theory and beam propagation method. The numerical results are in good agreement with theoretical prediction.