Mutations in Rht-B1 Locus May Negatively Affect Frost Tolerance in Bread Wheat.

The wheat semi-dwarfing genes Rht (Reduced height) are widely distributed among the contemporary wheat varieties. These genes also exert pleiotropic effects on plant tolerance towards various abiotic stressors. In this work, frost tolerance was studied in three near-isogenic lines of the facultative variety 'April Bearded' (AB), carrying the wild type allele Rht-B1a (tall phenotype), and the mutant alleles Rht-B1b (semi-dwarf) and Rht-B1c (dwarf), and was further compared with the tolerance of a typical winter type variety, 'Mv Beres'. The level of freezing tolerance was decreasing in the order 'Mv Beres' > AB Rht-B1a > AB Rht-B1b > AB Rht-B1c. To explain the observed differences, cold acclimation-related processes were studied: the expression of six cold-related genes, the phenylpropanoid pathway, carbohydrates, amino acids, polyamines and compounds in the tricarboxylic acid cycle. To achieve this, a comprehensive approach was applied, involving targeted analyses and untargeted metabolomics screening with the help of gas chromatography/liquid chromatography­mass spectrometry setups. Several cold-related processes exhibited similar changes in these genotypes; indeed, the accumulation of eight putrescine and agmatine derivatives, 17 flavones and numerous oligosaccharides (max. degree of polymerization 18) was associated with the level of freezing tolerance in the 'April Bearded' lines. In summary, the mutant Rht alleles may further decrease the generally low frost tolerance of the Rht-B1a, and, based on the metabolomics study, the mechanisms of frost tolerance may differ for a typical winter variety and a facultative variety. Present results point to the complex nature of frost resistance.

LC-MS based metabolic fingerprinting of apricot pistils after self-compatible and self-incompatible pollinations.

KEY MESSAGE: LC-MS based metabolomics approach revealed that putative metabolites other than flavonoids may significantly contribute to the sexual compatibility reactions in Prunus armeniaca. Possible mechanisms on related microtubule-stabilizing effects are provided. Identification of metabolites playing crucial roles in sexual incompatibility reactions in apricot (Prunus armeniaca L.) was the aim of the study. Metabolic fingerprints of self-compatible and self-incompatible apricot pistils were created using liquid chromatography coupled to time-of-flight mass spectrometry followed by untargeted compound search. Multivariate statistical analysis revealed 15 significant differential compounds among the total of 4006 and 1005 aligned metabolites in positive and negative ion modes, respectively. Total explained variance of 89.55% in principal component analysis (PCA) indicated high quality of differential expression analysis. The statistical analysis showed significant differences between genotypes and pollination time as well, which demonstrated high performance of the metabolic fingerprinting and revealed the presence of metabolites with significant influence on the self-incompatibility reactions. Finally, polyketide-based macrolides similar to peloruside A and a hydroxy sphingosine derivative are suggested to be significant differential metabolites in the experiment. These results indicate a strategy of pollen tubes to protect microtubules and avoid growth arrest involved in sexual incompatibility reactions of apricot.

Production of Hypoallergenic Antibacterial Peptides from Defatted Soybean Meal in Membrane Bioreactor: A Bioprocess Engineering Study with Comprehensive Product Characterization.

Hypoallergenic antibacterial low-molecular-mass peptides were produced from defatted soybean meal in a membrane bioreactor. In the first step, soybean meal proteins were digested with trypsin in the bioreactor, operated in batch mode. For the tryptic digestion of soybean meal protein, optimum initial soybean meal concentration of 75 g/L, temperature of 40 °C and pH=9.0 were determined. After enzymatic digestion, low-molecular-mass peptides were purified with cross-flow flat sheet membrane (pore size 100 µm) and then with tubular ceramic ultrafiltration membrane (molecular mass cut-off 5 kDa). Effects of transmembrane pressure and the use of a static turbulence promoter to reduce the concentration polarization near the ultrafiltration membrane surface were examined and their positive effects were proven. For the filtration with ultrafiltration membrane, transmembrane pressure of 3·105 Pa with 3-stage discontinuous diafiltration was found optimal. The molecular mass distribution of purified peptides using ultrafiltration membrane was determined by a liquid chromatography-electrospray ionization quadrupole time-of-flight mass spectrometry setup. More than 96% of the peptides (calculated as relative frequency) from the ultrafiltration membrane permeate had the molecular mass M≤1.7 kDa and the highest molecular mass was found to be 3.1 kDa. The decrease of allergenic property due to the tryptic digestion and membrane filtration was determined by an enzyme-linked immunosorbent assay and it was found to exceed 99.9%. It was also found that the peptides purified in the ultrafiltration membrane promoted the growth of Pediococcus acidilactici HA6111-2 and they possessed antibacterial activity against Bacillus cereus.

Study of different HILIC, mixed-mode, and other aqueous normal-phase approaches for the liquid chromatography/mass spectrometry-based determination of challenging polar pesticides.

The aim of the study was to evaluate the performance of different chromatographic approaches for the liquid chromatography/mass spectrometry (LC-MS(/MS)) determination of 24 highly polar pesticides. The studied compounds, which are in most cases unsuitable for conventional LC-MS(/MS) multiresidue methods were tested with nine different chromatographic conditions, including two different hydrophilic interaction liquid chromatography (HILIC) columns, two zwitterionic-type mixed-mode columns, three normal-phase columns operated in HILIC-mode (bare silica and two silica-based chemically bonded columns (cyano and amino)), and two standard reversed-phase C18 columns. Different sets of chromatographic parameters in positive (for 17 analytes) and negative ionization modes (for nine analytes) were examined. In order to compare the different approaches, a semi-quantitative classification was proposed, calculated as the percentage of an empirical performance value, which consisted of three main features: (i) capacity factor (k) to characterize analyte separation from the void, (ii) relative response factor, and (iii) peak shape based on analytes' peak width. While no single method was able to provide appropriate detection of all the 24 studied species in a single run, the best suited approach for the compounds ionized in positive mode was based on a UHPLC HILIC column with 1.8 µm particle size, providing appropriate results for 22 out of the 24 species tested. In contrast, the detection of glyphosate and aminomethylphosphonic acid could only be achieved with a zwitterionic-type mixed-mode column, which proved to be suitable only for the pesticides detected in negative ion mode. Finally, the selected approach (UHPLC HILIC) was found to be useful for the determination of multiple pesticides in oranges using HILIC-ESI-MS/MS, with limits of quantitation in the low microgram per kilogram in most cases. Graphical Abstract HILIC improves separation of multiclass polar pesticides.

Effective selenium detoxification in the seed proteins of a hyperaccumulator plant: the analysis of selenium-containing proteins of monkeypot nut (Lecythis minor) seeds.

A shotgun proteomic approach was applied to characterize the selenium (Se)-containing proteins of the selenium hyperaccumulator monkeypot nut (Lecythis minor) seeds. The exceptionally high Se content (>4,000 mg kg(-1)) of the sample enabled a straightforward procedure without the need for multiple preconcentration and fractionation steps. The proteins identified were sulfur-rich seed proteins, namely, 11S globulin (Q84ND2), 2S albumin (B6EU54), 2S sulfur-rich seed storage proteins (P04403 and P0C8Y8) and a 11S globulin-like protein (A0EM48). Database directed search for theoretically selenium-containing peptides was assisted by manual spectra evaluation to achieve around 25% coverage on sulfur analogues. Remarkable detoxification mechanisms on the proteome level were revealed in the form of multiple selenomethionine-methionine substitution and the lack of selenocysteine residues. The degree of selenomethionine substitution could be characterized by an exponential function that implies the inhibition of protein elongation by selenomethionine. Our results contribute to the deeper understanding of selenium detoxification procedures in hyperaccumulator plants.

Isotopologue pattern based data mining for selenium species from HILIC-ESI-Orbitrap-MS-derived spectra.

Automated and specific picking of selenium-containing molecular entities has not been an obvious option for software tools associated with electrospray high-resolution mass spectrometry (MS). In our study, a comprehensive pattern matching approach based on intra-isotopologue distance and isotopologue ratio data was critically evaluated in terms of reproducibility and selenium isotope selection on three samples, including selenized Torula yeast and the selenium hyperaccumulator plant Cardamine violifolia. Hydrophilic interaction liquid chromatography was applied to provide a one-step separation for water soluble metabolites to put an end to the need for either orthogonal setups or poor retention on reversed phase chromatography. Assistance from inductively coupled plasma-MS was taken only for chromatographic verification purposes, and the involvement of absolute mass defect (MD) data in selenometabolite-specific screening was assessed by multivariate statistical tools. High focus was placed on screening efficiency and on the validation of discovered selenized molecules to avoid reporting of artefacts. From the >1000 molecular entries detected, selenium-containing molecules were picked up with a recovery rate of >88% and a false positive rate of <10%. Isotop(ologu)e pairs of 78Se-80Se and 80Se-82Se proved to be the most performant in the detection. On the basis of accurate mass information and hypothetical deamination processes, elemental composition could be proposed for 72 species out of the 75 selenium species encountered without taking into account selenocompound databases. Absolute MD data were used to significantly differentiate a potentially sample-specific subgroup of false positive molecular entities from non-selenized and selenized entities.

Selenate triggers diverse oxidative responses in Astragalus species with diverse selenium tolerance and hyperaccumulation capacity.

Selenium (Se) hyperaccumulators are capable of uptake and tolerate high Se dosages. Excess Se-induced oxidative responses were compared in Astragalus bisulcatus and Astragalus cicer. Plants were grown on media supplemented with 0, 25 or 75 µM selenate for 14 days. Both A. bisulcatus and A. cicer accumulated >2000 µg/g dry weight Se to the shoot but the translocation factors of A. cicer were below 1 suggesting its non hyperaccumulator nature. A. cicer showed Se sensitivity indicated by reduced seedling fresh weight, root growth and root apical meristem viability, altered element homeostasis in the presence of Se. In Se-exposed A. bisulcatus, less toxic organic Se forms (mainly MetSeCys, γ-Glu-MetSeCys, and a selenosugar) dominated, while these were absent from A. cicer suggesting that the majority of the accumulated Se may be present as inorganic forms. The glutathione-dependent processes were more affected, while ascorbate levels were not notably influenced by Se in either species. Exogenous Se triggered more intense accumulation of malondialdehyde in the sensitive A. cicer compared with the tolerant A. bisulcatus. The extent of protein carbonylation in the roots of the 75 µM Se-exposed A. cicer exceeded that of A. bisulcatus indicating a correlation between selenate sensitivity and the degree of protein carbonylation. Overall, our results reveal connection between oxidative processes and Se sensitivity/tolerance/hyperaccumulation and contribute to the understanding of the molecular responses to excess Se.

UPLC-ESI-QTOF-MS assisted targeted metabolomics to study the enrichment of vinca alkaloids and related metabolites in Catharanthus roseus plants grown under controlled LED environment.

Enrichment of pharmaceutically important vinca alkaloids, vinblastine and vincristine, in the leaves of Madagascar periwinkle (Catharanthus roseus) plants through different pre- or postharvest treatments or cultivation conditions, e.g., exposing the plants to UV-irradiation, has been in focus for decades. Controlled LED environment in the visible light range offers the possibility of monitoring the changes in the concentration of metabolites in the vinca alkaloid-related pathway without involving UV-related abiotic stress. In the frame of our targeted metabolomics approach, 64 vinca alkaloids and metabolites were screened with the help of a UPLC-ESI-QTOF-MS instrumental setup from the leaf extracts of C. roseus plants grown in chambers under control (medium light), low light, and high blue / high red/ high far-red conditions. Out of the 14 metabolites that could be assigned either unambiguously with authentic standards or tentatively with high resolution mass spectrometry-based methods, all three dimer vinca alkaloids, that is, 3',4'-anhydrovinblastine, vinblastine and vincristine showed an at least nine-fold enrichment under high blue irradiation when compared with the control conditions: final concentrations of 961 mg kg-1 dry weight, 33.8 mg kg-1 dry weight, and 11.7 mg kg-1 dry weight could be achieved, respectively. As supported by multivariate statistical analysis, the key metabolites of the vinca alkaloid pathway were highly represented among the metabolites that were specifically stimulated by high blue light application.

Modulated Light Dependence of Growth, Flowering, and the Accumulation of Secondary Metabolites in Chilli.

Chili is widely used as a food additive and a flavouring and colouring agent and also has great importance in health preservation and therapy due to the abundant presence of many bioactive compounds, such as polyphenols, flavonoids, carotenoids, and capsaicinoids. Most of these secondary metabolites are strong antioxidants. In the present study, the effect of light intensity and spectral composition was studied on the growth, flowering, and yield of chilli together with the accumulation of secondary metabolites in the fruit. Two light intensities (300 and 500 µmol m-2 s-1) were applied in different spectral compositions. A broad white LED spectrum with and without FR application and with blue LED supplement was compared to blue and red LED lightings in different (80/20 and 95/5%) blue/red ratios. High light intensity increased the harvest index (fruit yield vs. biomass production) and reduced the flowering time of the plants. The amount of secondary metabolites in the fruit varied both by light intensity and spectral compositions; phenolic content and the radical scavenging activity were stimulated, whereas capsaicin accumulation was suppressed by blue light. The red colour of the fruit (provided by carotenoids) was inversely correlated with the absolute amount of blue, green, and far-red light. Based on the results, a schematic model was created, representing light-dependent metabolic changes in chilli. The results indicated that the accumulation of secondary metabolites could be modified by the adjustment of light intensity and spectral composition; however, different types of metabolites required different light environments.

Effect of sample preparation methods on the D,L-enantiomer ratio of extracted selenomethionine.

Effects of the two most widespread sample preparation techniques on the D,L-enantiomer ratio of extracted selenomethionine were monitored through the analysis of the certified reference material selenium-enriched yeast and the isolated protein fraction of high selenium monkeypot nut. The extracted selenomethionine (SeMet) fractions were orthogonally cleaned up with anion exchange chromatography before carrying out the enantiomer-specific detection to increase the robustness and the efficiency of the subsequent o-phthal-aldehyde and n-isobutyril-cysteine-based derivatisation process and reversed phase-high-performance liquid chromatography-inductively coupled plasma mass spectroscopy (ICP-MS) detection. The two techniques, namely methanesulphonic acid (MSA) based digestion and proteolytic digestion with protease XIV, resulted in significantly different ratio of D,L-selenomethionine with the final results of 2.2-2.7% and 0.5-0.6% of D-SeMet, respectively. The study revealed significant differences in the ICP-MS-related sensitivity of the derivatised selenomethionine enantiomers, which calls attention to the quantification of this selenoamino acid after MSA hydrolysis.

Water soluble selenometabolome of Cardamine violifolia.

Low molecular weight selenium containing metabolites in the leaves of the selenium hyperaccumulator Cardamine violifolia (261 mg total Se per kg d.w.) were targeted in this study. One dimensional cation exchange chromatography coupled to ICP-MS was used for purification and fractionation purposes prior to LC-Unispray-QTOF-MS analysis. The search for selenium species in full scan spectra was assisted with an automated mass defect based filtering approach. Besides selenocystathionine, selenohomocystine and its polyselenide derivative, a total number of 35 water soluble selenium metabolites other than selenolanthionine were encountered, including 30 previously unreported compounds. High occurrence of selenium containing hexoses was observed, together with the first assignment of N-glycoside derivatives of selenolanthionine. Quantification of the most abundant selenium species, selenolanthionine, was carried out with an ion pairing LC - post column isotope dilution ICP-MS setup, which revealed that this selenoamino acid accounted for 30% of the total selenium content of the leaf (78 mg (as Se) per kg d.w.).

Selenium tolerance, accumulation, localization and speciation in a Cardamine hyperaccumulator and a non-hyperaccumulator.

Cardamine violifolia (family Brassicaceae) is the first discovered selenium hyperaccumulator from the genus Cardamine with unique properties in terms of selenium accumulation, i.e., high abundance of selenolanthionine. In our study, a fully comprehensive experiment was conducted with the comparison of a non-hyperaccumulator Cardamine species, Cardamine pratensis, covering growth characteristics, chlorophyll fluorescence, spatial selenium/sulfur distribution patterns through elemental analyses (synchrotron-based X-Ray Fluorescence and ICP-OES) and speciation data through selenium K-edge micro X-ray absorption near-edge structure analysis (µXANES) and strong cation exchange (SCX)-ICP-MS. The results revealed remarkable differences in contrast to other selenium hyperaccumulators as neither Cardamine species showed evidence of growth stimulation by selenium. Also, selenite uptake was not inhibited by phosphate for either of the Cardamine species. Sulfate inhibited selenate uptake, but the two Cardamine species did not show any difference in this respect. However, µXRF derived speciation maps and selenium/sulfur uptake characteristics provided results that are similar to other formerly reported hyperaccumulator and non-hyperaccumulator Brassicaceae species. µXANES showed organic selenium, "C-Se-C", in seedlings of both species and also in mature C. violifolia plants. In contrast, selenate-supplied mature C. pratensis contained approximately half "C-Se-C" and half selenate. SCX-ICP-MS data showed evidence of the lack of selenocystine in any of the Cardamine plant extracts. Thus, C. violifolia shows clear selenium-related physiological and biochemical differences compared to C. pratensis and other selenium hyperaccumulators.

Speciation analysis of selenium metabolites in yeast-based food supplements by ICPMS-assisted hydrophilic interaction HPLC-hybrid linear ion trap/Orbitrap MS(n).

A new method was proposed for speciation analysis for selenium metabolites in Se-rich yeast. The coupling of a normal bore (4.6 mm) hydrophilic interaction liquid chromatography (HILIC) column with a hybrid linear ion trap/orbital ion trap mass spectrometer allowed the detection of the selenium-isotopic pattern in mass spectra down to the intrascan abundance of 0.001 with the low- and sub-part per million (ppm) mass accuracy regardless of the concentration. The quantitative elution recovery was verified by online ICPMS. The confirmation that all the species present were found was achieved by the parallel use of anion-exchange HPLC-ICPMS optimized for the maximum resolution. The species with intrascan abundance of at least 0.005 produced a cascade of product ion mass spectra to at least MS (4) with the preservation of the selenium isotopic pattern and the sub-ppm mass accuracy, which largely facilitated the structure elucidation. The approach was successfully applied to the characterization of nine (all which were present in the analyzed sample) selenium species in one chromatographic run.

Determination of selenocysteine and selenomethionine in edible animal tissues by 2D size-exclusion reversed-phase HPLC-ICP MS following carbamidomethylation and proteolytic extraction.

A method was developed for the simultaneous determination of selenomethionine (SeMet) and selenocysteine (SeCys) in meat (chicken and lamb muscles) and different offal tissues (heart, liver, kidney). The analytical procedure was based on the protein extraction with urea under reducing conditions (dithiothreitol), derivatization of SeCys and SeMet by carbamidomethylation with iodoacetamide (IAM) followed by quantitative proteolysis. The mixture of the derivatized Se-amino acids was purified by size-exclusion liquid chromatography (LC) and analysed by ion-paring reversed-phase HPLC-inductively coupled plasma mass spectroscopy (ICP MS). The quantification of SeCys and SeMet was carried out by the method of standard additions. (77)SeMet was used to control the SeMet derivatization efficiency and recovery. The method was validated by the determination of the Se mass balance. The Se-amino acids accounted for 91 +/- 8% of the total selenium (mean of 95 samples of seven tissues analysed over a period of 18 months). The method was applied to the discrimination of the contribution of selenoproteins (containing SeCys) and other Se-containing proteins (containing SeMet) in tissues of animals during supplementation studies (dose-effect and tolerance).

Monitoring the degradation of atropine and scopolamine in soil after spiking with naturally contaminated organic millet.

The spread of Datura sp. in European countries influences crop management and implies continuous food safety issues because of tropane alkaloids, atropine and scopolamine, the most relevant natural toxic compounds of this weed. These alkaloids can contaminate cereals to such a level that hampers food/feed related use and diverts batches of contaminated raw materials towards ultimate disposal such as burning. As no unambiguous information has been available on the fate of tropane alkaloids in soils, our study focused on the quantification and follow-up of these toxic residues in a soil experiment where the tropane alkaloids were mixed to the soil in the form of naturally contaminated unhulled millet in 1:40 millet:soil ratio - this approach provides a more realistic scenario compared to standard solution based spiking. To achieve accurate results, soil and millet extraction processes have been validated and a liquid chromatography - mass spectrometry set-up was addressed to provide selective and quantitative analysis. The initial concentration of atropine (75ngg-1) and scopolamine (47ngg-1) in the soil decreased with >90% in 15days and reached a high level of elimination (>97%) in 29days. This observation opens an option for the use of tropane contaminated millet or millet waste other than burning, as these toxic alkaloids can be significantly degraded in the soil system. On the other hand, the persistence of intact tropane alkaloids in soils might be questioned to the extent that calls the attention to the (re)assignment of their supposed allelopathic effects.

Selenolanthionine is the major water-soluble selenium compound in the selenium tolerant plant Cardamine violifolia.

BACKGROUND: Selenium hyperaccumulation in plants often involves the synthesis of non-proteinaceous methylated selenoamino acids serving for the elimination of excess selenium from plant metabolism to protect plant homeostasis. METHODS: Our study aimed at the identification of the main selenium species of the selenium hyperaccumulator plant Cardamine violifolia (Brassicaceae) that grows in the wild in the seleniferous region of Enshi, China. A sample of this plant (3.7 g Se kg-1 d.w.) was prepared with several extraction methods and the extracted selenium species were identified and quantified with liquid chromatography mass spectrometry set-ups. RESULTS: The Cardamine violifolia sample did not contain in considerable amount any of the organic selenium species that are often formed in hyperaccumulator plants; the inorganic selenium content (mostly as elemental selenium) accounted only for <20% of total Se. The most abundant selenium compound, accounting for about 40% of total Se was proved to be selenolanthionine, a selenium species that has never been unambiguously identified before from any selenium containing sample. The identification process was completed with chemical synthesis too. The molar ratio of lanthionine:selenolanthionine in the water extract was ca. 1:8. CONCLUSIONS: Finding selenolanthionine as the main organic selenium species in a plant possibly unearths a new way of selenium tolerance. This article is part of a Special Issue entitled Selenium research in biochemistry and biophysics - 200 year anniversary issue, edited by Dr. Elias Arnér and Dr. Regina Brigelius-Flohe.

Detection of over 100 selenium metabolites in selenized yeast by liquid chromatography electrospray time-of-flight mass spectrometry.

The characterization of the selenometabolome of Selenized(Se)-yeast, that is the fraction of water soluble low-molecular weight Se-metabolites produced in Se-yeast is of paramount interest to expand the knowledge on the composition of this food supplement. In this work, we have applied liquid chromatography electrospray time-of-flight mass spectrometry (LC-TOFMS) to search for Se-species from the low molecular weight range fraction of the selenized yeast used for food supplements. Prior to LC-TOFMS, sample treatment consisted of ultrasound assisted water extraction followed by size exclusion fractionation assisted with off-line inductively coupled plasma mass spectrometry detection of isotope 82Se. The fraction corresponding to low-molecular weight species was subjected to LC-TOFMS using electrospray ionization in the positive ion mode. The detection of the suspected selenized species has been based on the information obtained from accurate mass measurements of both the protonated molecules and fragments from in-source CID fragmentation; along with the characteristic isotope pattern exhibited by the presence of Se. The approach enables the detection of 103 selenized species, most of them not previously reported, in the range from ca. 300-650Da. Besides the detection of selenium species, related sulphur derivate metabolites were detected based on the accurate mass shift due to the substitution of sulphur and selenium.

Follow-up of the fate of imazalil from post-harvest lemon surface treatment to a baking experiment.

Imazalil is one of the most widespread fungicides used for the post-harvest treatment of citrus species. The separate use of peel during food preparation and processing may hitherto concentrate most of the imazalil into food products, where specific maximum residue limits hardly exist for this fungicide. In order to monitor comprehensively the path of imazalil, our study covered the monitoring of the efficiency of several washing treatments, the comparison of operative and related sample preparation methods for the lemon samples, the validation of a sample preparation technique for a fatty cake matrix, the preparation of a model cake sample made separately either with imazalil containing lemon peel or with imazalil spiking, the monitoring of imazalil degradation into α-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol because of the baking process, and finally the mass balance of imazalil throughout the washing experiments and the baking process. Quantification of imazalil was carried out with an LC-ESI-MS/MS set-up, while LC-QTOF was used for the monitoring of imazalil degradation. Concerning the washing, none of the addressed five washing protocols could remove more than 30% of imazalil from the surface of the lemon samples. The study revealed a significant difference between the extraction efficiency of imazalil by the EN 15662:2008 and AOAC 2007.1 methods, with the advantage of the former. The use of the model cake sample helped to validate a modified version of the EN 15662:2008 method that included a freeze-out step to efficiently recover imazalil (>90%) from the fatty cake matrix. The degradation of imazalil during the baking process was significantly higher when this analyte was spiked into the cake matrix than in the case of preparing the cake with imazalil-containing lemon peel (52% vs. 22%). This observation calls the attention to the careful evaluation of pesticide stability data that are based on solution spiking experiments.

Elemental analysis in biotechnology.

This article focuses on analytical strategies integrating atomic spectroscopy in biotechnology. The rationale behind developing such methods is inherently linked to unique features of the key technique in elemental analysis, which is inductively coupled plasma mass spectrometry: (1) the high sensitivity and selectivity of state of the art instrumentation, (2) the possibility of accurate absolute quantification even in complex matrices, (3) the capability of combining elemental detectors with chromatographic separation methods and the versatility of the latter approach, (4) the complementarity of inorganic and organic mass spectrometry, (5) the multi-element capability and finally (6) the capability of isotopic analysis. The article highlights the most recent bio-analytical developments exploiting these methodological advantages and shows the potential in biotechnological applications.